Divergicin 750, a novel bacteriocin produced by Carnobacterium divergens 750

Abstract Divergicin 750, a bacteriocin produced by Carnobacterium divergens 750, preferentially inhibited the growth of strains of Carnobacterium and Enterococcus . Selected strains of Listeria monocytogenes and Clostridium perfringens were also inhibited. The bacteriocin was purified to homogeneity by ammonium sulfate precipitation and sequential S-Sepharose, hydrophobic interaction and reversed phase chromatography. The complete amino acid sequence was determined by Edman degradation. The peptide consisted of 34 amino acid residues. The calculated ifM_r from the peptide sequence, 3447.7, agreed well with that obtained by mass spectrometry. Divergicin 750 did not show any sequence similarities to other known bacteriocins. The plasmid-located structural gene encoding divergicin 750 ( dvn750 ) was cloned and sequenced. The gene encoded a primary translation product of 63 amino acids with a deduced M _rmr = 6789.4 which is cleaved between amino acid residues 29 and 30 to yield the mature bacteriocin.     

Amino acid and nucleotide sequence, adjacent genes, and heterologous expression of hiracin JM79, a sec-dependent bacteriocin produced by Enterococcus hirae DCH5, isolated from Mallard ducks (Anas platyrhynchos)

The primary structure of a bacteriocin produced by Enterococcus hirae DCH5 was determined by combined amino acid and DNA sequencing. Nucleotide analysis of a 2838-bp DNA fragment of E. hirae DCH5 revealed five putative ORFs. The first orf (hirJM79) encodes a 74-amino-acid peptide containing an N-terminal signal peptide of 30 amino acids, followed by the amino acid sequence of the mature bacteriocin, hiracin JM79 (HirJM79), of 44 amino acids. The second orf (hiriJM79) encodes the putative immunity protein of HirJM79. Contiguous ORFs encode a putative mobilization protein (orfC), a relaxase/mobilization nuclease domain (orfD), and a hypothetical protein (orfE). The production and functional expression of HirJM79 by heterologous hosts suggest that hirJM79 is the minimum requirement for production of biologically active HirJM79, that HirJM79 is most likely externalized by the general secretory pathway or sec-dependent pathway, and that HiriJM79 is the immunity protein for HirJM79.     

Molecular analyses of the lactococcin A gene cluster from Lactococcus lactis subsp. lactis biovar diacetylactis WM4.

The genes responsible for bacteriocin production and immunity in Lactococcus lactis subsp. lactis biovar diacetylactis WM4 were localized and characterized by DNA restriction fragment deletion, subcloning, and nucleotide sequence analysis. The nucleotide sequence of a 5.6-kb AvaII restriction fragment revealed a cluster with five complete open reading frames (ORFs) in the same orientation. DNA and protein homology analyses, combined with deletion and Tn5 insertion mutagenesis, implicated four of the ORFs in the production of and immunity to lactococcin A. The last two ORFs in the cluster were the lactococcin A structural and immunity genes, lcnA and lciA. The two ORFs immediately upstream of lcnA and lciA were designated lcnC and lcnD, and the proteins that they encoded showed similarities to proteins of signal sequence-independent secretion systems. lcnC encodes a protein of 716 amino acids that could belong to the HlyB family of ATP-dependent membrane translocators. LcnC contains an ATP binding domain in a conserved C-terminal stretch of approximately 200 amino acids and three putative hydrophobic segments in the N terminus. The lcnD product, LcnD, of 474 amino acids, is essential for lactococcin A expression and shows structural similarities to HlyD and its homologs. On the basis of these results, a secretion apparatus that is essential for the full expression of active lactococcin A is postulated.     

Cloning, phenotypic expression, and DNA sequence of the gene for lactacin F, an antimicrobial peptide produced by Lactobacillus spp

Lactacin F is a heat-stable bacteriocin produced by Lactobacillus acidophilus 11088. A 63-mer oligonucleotide probe deduced from the N-terminal lactacin F amino acid sequence was used to clone the putative laf structural gene from plasmid DNA of a lactacin F-producing transconjugant, L. acidophilus T143. One clone, NCK360, harbored a recombinant plasmid, pTRK160, which contained a 2.2-kb EcoRI fragment of the size expected from hybridization experiments. An Escherichia coli-L. acidophilus shuttle vector was constructed, and a subclone (pTRK162) containing the 2.2-kb EcoRI fragment was introduced by electroporation into two lactacin F-negative strains, L. acidophilus 89 and 88-C. Lactobacillus transformants containing pTRK162 expressed lactacin F activity and immunity. Bacteriocin produced by the transformants exhibited an inhibitory spectrum and heat stability identical to those of the wild-type bacteriocin. An 873-bp region of the 2.2-kb fragment was sequenced by using a 20-mer degenerate lactacin F-specific primer to initiate sequencing from within the lactacin F structural gene. Analysis of the resulting sequence identified an open reading frame which could encode a protein of 75 amino acids. The 25 N-terminal amino acids for lactacin F were identified within the open reading frame along with an N-terminal extension, possibly a signal sequence. The lactacin F N-terminal sequence, through the remainder of the open reading frame (57 amino acids; 6.3 kDa), correlated extremely well with composition analyses of purified lactacin F which also predicted a size of 51 to 56 amino acid residues. Molecular characterization of lactacin F identified a small hydrophobic peptide that may be representative of a common bacteriocin class in lactic acid bacteria.     

Identification of a new plasmid-encoded sec-dependent bacteriocin produced by Listeria innocua 743

Listeria innocua 743 produces an inhibitory activity demonstrating broad-spectrum inhibition of Listeria monocytogenes isolates. Gel-electrophoretic analysis of culture supernatants indicated that two inhibitors with different molecular weights were produced by this strain. Insertion of Tn917 into a 2.9 Kb plasmid (pHC743) generated mutants with either an impaired ability or a loss in ability to produce one of the inhibitors. Sequence analysis of the transposon insertion regions revealed the presence of two continuous open reading frames, the first encoding a new pediocin-like bacteriocin (lisA) and the second encoding a protein homologous with genes involved in immunity toward other bacteriocins (lisB). Translation of the bacteriocin gene (lisA) initiates from a noncanonical start codon and encodes a 71-amino-acid prebacteriocin which lacked the double glycine leader peptidase processing site common in other type II bacteriocins. Alignment of the sequence with the processed N termini of related bacteriocins suggests that the mature bacteriocin consists of 43 amino acids, with a predicted molecular mass of 4,484 Da. Mutants containing insertions into lisA were sensitive to the inhibitor, indicating that lisAB forms a single operon and that lisB represents the immunity protein. Cloning of an amplicon containing the lisAB operon into Escherichia coli resulted in expression and export of the bacteriocin. This finding confirms that the phenotype is dependent on the structural and immunity gene only and that export of this bacteriocin is sec dependent. This is the first confirmation of bacteriocin production in a Listeria spp., and it is of interest that this bacteriocin is closely related to the pediocin family of bacteriocins produced by lactic acid bacteria.     

Double-glycine-type leader peptides direct secretion of bacteriocins by ABC transporters: colicin V secretion in Lactococcus lactis

Many non-lantibiotic bacteriocins of lactic acid bacteria are produced as precursors which have N-terminal leader peptides that share similarities in amino acid sequence and contain a conserved processing site of two glycine residues in positions -1 and -2. A dedicated ATP-binding cassette (ABC) transporter is responsible for the proteolytic cleavage of the leader peptides and subsequent translocation of the bacteriocins across the cytoplasmic membrane. To investigate the role that these leader peptides play in the recognition of the precursor by the ABC transporters, the leader peptides of leucocin A, lactococcin A or colicin V were fused to divergicin A, a bacteriocin from Carnobacterlum divergens that is secreted via the cell's general secretion pathway. Production of divergicin was monitored when these fusion constructs were introduced into Leuconostoc gelidum, Lactococcus lactis and Escherichia coli, which carry the secretion apparatus for leucocin A, lactococcins A and B, and colicin V, respectively. The different leader peptides directed the production of divergicin in the homologous hosts. In some cases production of divergicin was also observed when the leader peptides were used in heterologous hosts. For ABC-transporter-dependent secretion in E. coli the outer membrane protein TolC was required. Using this strategy, colicin V was produced in L. lactis by fusing this bacteriocin behind the leader peptide of leucocin A.     

Colicin V can be produced by lactic acid bacteria

Colicin V is a small, proteinaceous bacterial toxin, produced by many strains of Escherichia coli and other members of the Enterobacteriaceae, that fits the definition of class II bacteriocins of Gram-positive bacteria. Export of colicin V is dependent on specific ABC (ATP-binding cassette) secretion proteins which recognize a double-glycine-type leader peptide on the immature colicin V bacteriocin. Replacement of the colicin V leader peptide by a signal peptide from the signal sequence-dependent bacteriocin divergicin A allowed expression of colicin V in lactic acid bacteria. This system may serve as a model for the heterologous expression of other small bacteriocins active against Gram-negative bacteria and other antibacterial peptides from lactic acid bacteria.     

Colicin U, a novel colicin produced by Shigella boydii.

A novel colicin, designated colicin U, was found in two Shigella boydii strains of serovars 1 and 8. Colicin U was active against bacterial strains of the genera Escherichia and Shigella. Plasmid pColU (7.3 kb) of the colicinogenic strain S. boydii M592 (serovar 8) was sequenced, and three colicin genes were identified. The colicin U activity gene, cua, encodes a protein of 619 amino acids (Mr, 66,289); the immunity gene, cui, encodes a protein of 174 amino acids (Mr, 20,688); and the lytic protein gene, cul, encodes a polypeptide of 45 amino acids (Mr, 4,672). Colicin U displays sequence similarities to various colicins. The N-terminal sequence of 130 amino acids has 54% identity to the N-terminal sequence of bacteriocin 28b produced by Serratia marcescens. Furthermore, the N-terminal 36 amino acids have striking sequence identity (83%) to colicin A. Although the C-terminal pore-forming sequence of colicin U shows the highest degree of identity (73%) to the pore-forming C-terminal sequence of colicin B, the immunity protein, which interacts with the same region, displays a higher degree of sequence similarity to the immunity protein of colicin A (45%) than to the immunity protein of colicin B (30.5%). Immunity specificity is probably conferred by a short sequence from residues 571 to residue 599 of colicin U; this sequence is not similar to that of colicin B. We showed that binding of colicin U to sensitive cells is mediated by the OmpA protein, the OmpF porin, and core lipopolysaccharide. Uptake of colicin U was dependent on the TolA, -B, -Q, and -R proteins. pColU is homologous to plasmid pSB41 (4.1 kb) except for the colicin genes on pColU. pSB41 and pColU coexist in S. boydii strains and can be cotransformed into Escherichia coli, and both plasmids are homologous to pColE1.     

Simple method to identify bacteriocin induction peptides and to auto-induce bacteriocin production at low cell density

The production of some bacteriocins by lactic acid bacteria is regulated by induction peptides (IPs) that are secreted by a dedicated secretion system. The IP gene cbaX, for carnobacteriocin A production by Carnobacterium piscicola LV17A, and a presumptive IP gene (orf6), associated with the genetic locus for enterocin B production in Enterococcus faecium BFE 900, were fused to the signal peptide of the bacteriocin divergicin A from Carnobacterium divergens LV13 to access the general secretory pathway. The culture supernatants of C. piscicola UAL26 and Lactococcus lactis MG1363 containing either of these constructs were used to induce bacteriocin production by Bac(-) cultures of C. piscicola LV17A or E. faecium CTC492. The cbaX fusion product induced bacteriocin production by Bac(-) C. piscicola LV17A, but the orf6 fusion product did not induce bacteriocin production by E. faecium CTC492. This represents a relatively simple method of confirming the role of presumptive IPs. The transformation of C. piscicola LV17A with the CbaX gene under expression of the P32 promoter from L. lactis resulted in constitutive production of bacteriocin by either the dedicated transport apparatus or the general secretory pathway.     

Purification and genetic characterization of plantaricin NC8, a novel coculture-inducible two-peptide bacteriocin from Lactobacillus plantarum NC8

A new, coculture-inducible two-peptide bacteriocin named plantaricin NC8 (PLNC8) was isolated from Lactobacillus plantarum NC8 cultures which had been induced with Lactococcus lactis MG1363 or Pediococcus pentosaceus FBB63. This bacteriocin consists of two distinct peptides, named alpha and beta, which were separated by C(2)-C(18) reverse-phase chromatography and whose complementary action is necessary for full plantaricin NC8 activity. N-terminal sequencing of both purified peptides showed 28 and 34 amino acids residues for PLNC8 alpha and PLNC8 beta, respectively, which showed no sequence similarity to other known bacteriocins. Mass spectrometry analysis showed molecular masses of 3,587 Da (alpha) and 4,000 Da (beta). The corresponding genes, designated plNC8A and plNC8B, were sequenced, and their nucleotide sequences revealed that both peptides are produced as bacteriocin precursors of 47 and 55 amino acids, respectively, which include N-terminal leader sequences of the double-glycine type. The mature alpha and beta peptides contain 29 and 34 amino acids, respectively. An open reading frame, orfC, which encodes a putative immunity protein was found downstream of plNC8B and overlapping plNC8A. Upstream of the putative -35 region of plNC8B, two direct repeats of 9 bp were identified, which agrees with the consensus sequence and structure of promoters of class II bacteriocin operons whose expression is dependent on an autoinduction mechanism.     

Atypical Genetic Locus Associated with Constitutive Production of Enterocin B by Enterococcus faecium BFE 900

A purified bacteriocin produced by Enterococcus faecium BFE 900 isolated from black olives was shown by Edman degradation and mass spectrometric analyses to be identical to enterocin B produced by E. faecium T136 from meat (P. Casaus, T. Nilsen, L. M. Cintas, I. F. Nes, P. E. Hernández, and H. Holo, Microbiology 143:2287–2294, 1997). The structural gene was located on a 2.2-kb HindIII fragment and a 12.0-kb EcoRI chromosomal fragment. The genetic characteristics and production of EntB by E. faecium BFE 900 differed from that described so far by the presence of a conserved sequence like a regulatory box upstream of the EntB gene, and its production was constitutive and not regulated. The 2.2-kb chromosomal fragment contained the hitherto undetected immunity gene for EntB in an atypical orientation that is the reverse of that of the structural gene. Typical transport and other genes associated with bacteriocin production were not detected on the 12.0-kb chromosomal fragment containing the EntB structural gene. This makes the EntB genetic system different from most other bacteriocin systems, where transport and possible regulatory genes are clustered. EntB was subcloned and expressed by the dedicated secretion machinery of Carnobacterium piscicola LV17A. The structural gene was amplified by PCR, fused to the divergicin A signal peptide, and expressed by the general secretory pathway in Enterococcus faecalis ATCC 19433.     

Identification and Properties of the Genes Encoding Microcin E492 and Its Immunity Protein

The gene coding for the immunity protein (mceB) and the structural gene of microcin E492 (mceA), a low-molecular-weight channel-forming bacteriocin produced by a strain of Klebsiella pneumoniae, have been characterized. The microcin gene codes for a precursor protein of either 99 or 103 amino acids. Protein sequencing of the N-terminal region of microcin E492 unequivocally identified this gene as the microcin structural gene and indicated that this microcin is synthesized as a precursor protein that is cleaved at either amino acid 15 or 19, at a site resembling the double-glycine motif. The gene encoding the 95-amino-acid immunity protein (mceB) was identified by cloning the DNA segment that encodes only this polypeptide into an expression vector and demonstrating the acquisition of immunity to microcin E492. As expected, the immunity protein was found to be associated with the inner membrane. Analysis of the DNA sequence indicates that these genes belong to the same family as microcin 24, and they do not share structural motifs with any other known channel-forming bacteriocin. The organization of the microcin- and immunity protein-encoding genes suggests that they are coordinately expressed.     

Molecular cloning and expression of the gene encoding family 19 chitinase from Streptomyces sp. J-13-3

The gene encoding chitinase from Streptomyces sp. (strain J-13-3) was cloned and its nucleotide structure was analyzed. The chitinase consisted of 298 amino acids containing a signal peptides (29 amino acids) and a mature protein (269 amino acids), and had calculated molecular mass of 31,081 Da. The calculated molecular mass (28,229 Da) of the mature protein was almost same as that of the native chitinase determined by matrix-assisted laser desorption ionization time-of-flight mass spectrometer. Comparison of the encoded amino acid sequences with those of other chitinases showed that J-13-3 chitinase was a member of the glycosyl-hydrolase family 19 chitinases and the mature protein had a chitin binding domain (65 amino acids) containing AKWWTQ motif and a catalytic domain (204 amino acids). The J-13-3 strain had a single chitinase gene. The chitinase (298 amino acids) with C-terminal His tag was overexpressed in Escherichia coli BL21(DE3) cells. The recombinant chitinase purified from the cell extract had identical N-terminal amino acid sequence of the mature protein in spite of confirmation of the nucleotide sequence, suggesting that the signal peptide sequence is successfully cut off at the predicted site by signal peptidase from E. coli and will be a useful genetic tool in protein engineering for production of soluble recombinant protein. The optimum temperature and pH ranges of the purified chitinase were at 35-40 degrees C and 5.5-6.0, respectively. The purified chitinase hydrolyzed colloidal chitin and trimer to hexamer of N-acetylglucosamine and also inhibited the hyphal extension of Tricoderma reesei.     

Amylocyclicin,a Novel Circular Bacteriocin Produced by Bacillus amyloliquefaciens FZB42

Bacillus amyloliquefaciens FZB42 is a Gram-positive plant growth-promoting bacterium with an impressive capacity to synthesize nonribosomal secondary metabolites with antimicrobial activity. Here we report on a novel circular bacteriocin which is ribosomally synthesized by FZB42. The compound displayed high antibacterial activity against closely related Gram-positive bacteria. Transposon mutagenesis and subsequent site-specific mutagenesis combined with matrix-assisted laser desorption ionization–time of flight mass spectroscopy revealed that a cluster of six genes covering 4,490 bp was responsible for the production, modification, and export of and immunity to an antibacterial compound, here designated amylocyclicin, with a molecular mass of 6,381 Da. Peptide sequencing of the fragments obtained after tryptic digestion of the purified peptide revealed posttranslational cleavage of an N-terminal extension and head-to-tail circularization of the novel bacteriocin. Homology to other putative circular bacteriocins in related bacteria let us assume that this type of peptide is widespread among the Bacillus/Paenibacillus taxon.     

Biochemical and genetic evidence that Enterococcus faecium L50 produces enterocins L50A and L50B, the sec-dependent enterocin P, and a novel bacteriocin secreted without an N-terminal extension termed enterocin Q

Enterococcus faecium L50 grown at 16 to 32 degrees C produces enterocin L50 (EntL50), consisting of EntL50A and EntL50B, two unmodified non-pediocin-like peptides synthesized without an N-terminal leader sequence or signal peptide. However, the bacteriocin activity found in the cell-free culture supernatants following growth at higher temperatures (37 to 47 degrees C) is not due to EntL50. A purification procedure including cation-exchange, hydrophobic interaction, and reverse-phase liquid chromatography has shown that the antimicrobial activity is due to two different bacteriocins. Amino acid sequences obtained by Edman degradation and DNA sequencing analyses revealed that one is identical to the sec-dependent pediocin-like enterocin P produced by E. faecium P13 (L. M. Cintas, P. Casaus, L. S. Havarstein, P. E. Hernández, and I. F. Nes, Appl. Environ. Microbiol. 63:4321-4330, 1997) and the other is a novel unmodified non-pediocin-like bacteriocin termed enterocin Q (EntQ), with a molecular mass of 3,980. DNA sequencing analysis of a 963-bp region of E. faecium L50 containing the enterocin P structural gene (entP) and the putative immunity protein gene (entiP) reveals a genetic organization identical to that previously found in E. faecium P13. DNA sequencing analysis of a 1,448-bp region identified two consecutive but diverging open reading frames (ORFs) of which one, termed entQ, encodes a 34-amino-acid protein whose deduced amino acid sequence was identical to that obtained for EntQ by amino acid sequencing, showing that EntQ, similarly to EntL50A and EntL50B, is synthesized without an N-terminal leader sequence or signal peptide. The second ORF, termed orf2, was located immediately upstream of and in opposite orientation to entQ and encodes a putative immunity protein composed of 221 amino acids. Bacteriocin production by E. faecium L50 showed that EntP and EntQ are produced in the temperature range from 16 to 47 degrees C and maximally detected at 47 and 37 to 47 degrees C, respectively, while EntL50A and EntL50B are maximally synthesized at 16 to 25 degrees C and are not detected at 37 degrees C or above.     

Molecular analyses of the lactococcin A gene cluster from Lactococcus lactis subsp. lactis biovar diacetylactis WM4.

The genes responsible for bacteriocin production and immunity in Lactococcus lactis subsp. lactis biovar diacetylactis WM4 were localized and characterized by DNA restriction fragment deletion, subcloning, and nucleotide sequence analysis. The nucleotide sequence of a 5.6-kb AvaII restriction fragment revealed a cluster with five complete open reading frames (ORFs) in the same orientation. DNA and protein homology analyses, combined with deletion and Tn5 insertion mutagenesis, implicated four of the ORFs in the production of and immunity to lactococcin A. The last two ORFs in the cluster were the lactococcin A structural and immunity genes, lcnA and lciA. The two ORFs immediately upstream of lcnA and lciA were designated lcnC and lcnD, and the proteins that they encoded showed similarities to proteins of signal sequence-independent secretion systems. lcnC encodes a protein of 716 amino acids that could belong to the HlyB family of ATP-dependent membrane translocators. LcnC contains an ATP binding domain in a conserved C-terminal stretch of approximately 200 amino acids and three putative hydrophobic segments in the N terminus. The lcnD product, LcnD, of 474 amino acids, is essential for lactococcin A expression and shows structural similarities to HlyD and its homologs. On the basis of these results, a secretion apparatus that is essential for the full expression of active lactococcin A is postulated.     

Nucleotide sequence of the cDNA encoding the precursor for mitochondrial serine:pyruvate aminotransferase of rat liver

The nucleotide sequence of the mRNA coding for the precursor of mitochondrial serine:pyruvate aminotransferase of rat liver was determined from those of cDNA clones. The mRNA comprises at least 1533 nucleotides, except the poly(A) tail, and encodes a polypeptide consisting of 414 amino acid residues with a molecular mass of 45,834 Da. Comparison of the N-terminal amino acid sequence of mitochondrial serine:pyruvate aminotransferase with the nucleotide sequence of the mRNA showed that the mature form of the mitochondrial enzyme consisted of 390 amino acid residues of 43,210 Da. The amino acid composition of mitochondrial serine:pyruvate aminotransferase deduced from the nucleotide sequence of the cDNA showed good agreement with the composition determined on acid hydrolysis of the purified protein. The extra 24 amino acid residues correspond to the N-terminal extension peptide (pre-sequence) that is indispensable for the specific import of the precursor protein into mitochondria. In the extension peptide there are four basic amino acids distributed among hydrophobic amino acids and, as revealed on helical wheel analysis, the putative alpha-helical structure of the peptide was amphiphilic in nature. The secondary structures of the mature serine:pyruvate aminotransferase and three other aminotransferases of rat liver were predicted from their amino acid sequences. Their secondary structures exhibited a common feature and so we propose the specific lysine residue which binds pyridoxal phosphate as the active site of serine:pyruvate aminotransferase.     

Propionicin SM1, a bacteriocin from Propionibacterium jensenii DF1: isolation and characterization of the protein and its gene

We purified a bacteriocin from the cell-free supernatant of Propionibacterium jensenii DF1 isolated from Swiss raw milk, and named it propionicin SM1. The heat-stable protein was strongly bactericidal against P. jensenii DSM20274. On the basis of the N-terminal amino acid sequence of the purified protein, a degenerate oligonucleotide probe was designed to locate and clone the corresponding gene of P. jensenii DF1. It hybridized exclusively with the DF1l-resident plasmid pLME106, but not with chromosomal DNA. Sequencing of the 6.9-kb plasmid revealed the targeted amino acid sequence within an open reading frame (ORF4) of 207 amino acids (molecular mass, 22,865 Da). The corresponding gene was named ppnA. It encodes the prepeptide PpnA that is processed to the mature protein (19,942 Da) propionicin SM1. No sequence homology is detectable with known proteins. However, the proposed leader peptide sequence containing 27 amino acids has typical signal peptide features and shows good homology to the leader peptide of Usp45, a protein excreted from Lactococcus lactis (VAN ASSELDONK et al., 1993). Plasmid pLME106 contains at least 9 ORFs, some exhibiting significant homologies to plasmid-encoded functions from other bacteria. The highest identity values were found for ORF1 with the theta replicase (acc. no. U39878) of Brevibacterium linens (58.8%) and ORF6 with the recombinase/invertase (acc. no. AF060871) found in Rhodococcus rhodochrous (46.4%).     

Biochemical characterisation and genetic analysis of aureocin A53, a new,atypical bacteriocin from Staphylococcus aureus

Aureocin A53 is produced by Staphylococcus aureus A53. It is encoded on a 10.4 kb plasmid, pRJ9, and is active against Listeria monocytogenes. Aureocin A53 is a highly cationic 51-residue peptide containing ten lysine and five tryptophan residues. Aureocin A53 was purified to homogeneity by hydrophobic-interaction, cation-exchange, and reverse-phase chromatography. MALDI-TOF mass spectrometry yielded a molecular mass of 6012.5 Da, which was 28 Da higher than predicted from the structural gene sequence of the bacteriocin. The mass increment resulted from an N-formylmethionine residue, indicating that the aureocin A53 is synthesised and secreted without a typical bacteriocin leader sequence or sec-dependent signal peptide. The structural identity of aureocin A53 was verified by Edman sequencing after de-blocking with cyanogen bromide and extensive mass spectrometry analysis of enzymatically and laser-generated fragments. The complete sequence of pRJ9 was determined and none of the open reading frames identified in the vicinity of the structural gene aucA showed similarity to genes that are typically found in bacteriocin gene clusters. Thus, neither a dedicated protease or transporter, nor modifying enzymes and regulatory elements seemed to be involved in the production of aureocin A53. Further unique features that distinguish aureocin A53 from other peptide bacteriocins include remarkable protease stability and a defined, rigid structure in aqueous solution.     

Divergicin M35-Chitosan Film: Development and Characterization

Chitosan films loaded with bacteriocin were examined by FTIR spectroscopy, tested for color, puncture strength, water vapor permeability, and as antimicrobials of Listeria innocua HPB13. Divergicin M35, a bacteriocin produced by Carnobacterium divergens, was incorporated into films made with chitosan of molecular mass 2 kDa, 20 kDa, or 100 kDa and de-acetylated either 87% or 95%. Only 100 kDa chitosan yielded films that could be peeled and handled easily. The higher degree of de-acetylation increased the total color factor (ΔE) of bacteriocin-loaded films, their permeability, and puncture strength. Incorporation of divergicin M35 into the films increased amide I peak intensity but otherwise did not induce significant structural change. The FTIR spectra of divergicin M35 shed from the films did not differ from those of the original free bacteriocin, except in overall peak intensity. The release of active divergicin M35 from the film was faster into the buffer than into tryptic soy broth and peaked at 10–12 h in both cases. Chitosan 95% de-acetylated and loaded with divergicin M35 was the most active, producing a six-log drop in Listeria innocua HPB13 viable count within 24 h. These results suggest that the biocompatible and biodegradable films developed here have the potential for application as antimicrobials of Listeria spp. in foods, especially ready-to-eat, minimally processed products.