Direct fermentation of potato starch in wastewater to lactic acid by<Emphasis Type="Italic">Rhizopus oryzae</Emphasis>

The fungal species ofRhizopus oryzae 2062 has the capacity to carry out a single stage fermentation process for lactic acid production from potato starch wastewater. Starch hydrolysis, reducing sugar accumulation, biomass formation, and lactic acid production were affected with variations in pH, temperature, and starch source and concentration. A growth condition with starch concentration approximately 20 g/L at pH 6.0 and 30°C was favourable for starch fermentation, resulting in a lactic acid yield of 78.3%–85.5% associated with 1.5–2.0 g/L fungal biomass produced in 36 h of fermentation.     

Production of lactic acid and fungal biomass by Rhizopus fungi from food processing waste streams

This study proposed a novel waste utilization bioprocess for production of lactic acid and fungal biomass from waste streams by fungal species of Rhizopus arrhizus 36017 and R. oryzae 2062. The lactic acid and fungal biomass were produced in a single-stage simultaneous saccharification and fermentation process using potato, corn, wheat and pineapple waste streams as production media. R. arrhizus 36017 gave a high lactic acid yield up to 0.94–0.97 g/g of starch or sugars associated with 4–5 g/l of fungal biomass produced, while 17–19 g/l fungal biomass with a lactic acid yield of 0.65–0.76 g/g was produced by the R. oryzae 2062 in 36–48 h fermentation. Supplementation of 2 g/l of ammonium sulfate, yeast extract and peptone stimulated an increase in 8–15% lactic acid yield and 10–20% fungal biomass.

     

Biotechnological production of lactic acid integrated with fishmeal wastewater treatment by <Emphasis Type="Italic">Rhizopus oryzae</Emphasis>

Fishmeal wastewater, a seafood processing waste, was utilized for production of lactic acid and fungal biomass by Rhizopus oryzae AS 3.254 with the addition of sugars. The 30 g/l exogenous glucose in fishmeal wastewater was superior to starch in view of productivities of lactic acid and fungal biomass, and COD reduction. Fishmeal wastewater can be a replacement for peptone which was the most suitable nitrogen source for lactic acid production among the tested organic or inorganic nitrogen sources. Exogenous NaCl (12 g/l) completely inhibited the production of lactic acid and fungal growth. In the medium of COD 5,000 mg/l fishmeal wastewater with the addition of 30 g/l glucose, the maximum productivity of lactic acid was 0.723 g/l h corresponding to productivity of fungal biomass 0.0925 g/l h, COD reduction 84.9% and total nitrogen removal 50.3% at a fermentation time of 30 h.     

Effects of Cultivation Parameters on the Morphology of Rhizopus arrhizus and the Lactic Acid Production in a Bubble Column Reactor

The use of filamentous Rhizopus for lactic acid production is facing a challenge due to its low yield mainly caused by the difficulty to control its morphology in submerged fermentation processes. This study was aimed at investigating the impacts of cultivation parameters on the morphology of Rhizopus arrhizus DAR 36017 and lactic acid production using waste potato starch in a laboratory scale bubble column reactor (BCR). The fungal morphology was significantly influenced by carbon sources, process pH, starch concentrations, sparger designs and aeration rates. The favorable morphology for lactic acid production was a freely dispersed small pellet, which was achieved under operation conditions at pH 5.0–6.0, starch concentrations of 60–120 g/L and aeration rates of 0.2–0.8 vvm using a sintered stainless steel disc sparger. Optimal cultivation conditions at pH 6.0 and an aeration rate of 0.4 vvm resulted in the formation of freely dispersed small pellets and 103.8 g/L lactic acid with a yield of 87 % from 120 g/L liquefied potato starch in 48 h. The overall results in terms of lactic acid yield and productivity are comparable to those reported in previous studies using immobilized Rhizopus cells in batch fermentations.     

Production of lactic acid and fungal biomass by Rhizopus fungi from food processing waste streams

This study proposed a novel waste utilization bioprocess for production of lactic acid and fungal biomass from waste streams by fungal species of Rhizopus arrhizus 36017 and R. oryzae 2062. The lactic acid and fungal biomass were produced in a single-stage simultaneous saccharification and fermentation process using potato, corn, wheat and pineapple waste streams as production media. R. arrhizus 36017 gave a high lactic acid yield up to 0.94-0.97 g/g of starch or sugars associated with 4-5 g/l of fungal biomass produced, while 17-19 g/l fungal biomass with a lactic acid yield of 0.65-0.76 g/g was produced by the R. oryzae 2062 in 36-48 h fermentation. Supplementation of 2 g/l of ammonium sulfate, yeast extract and peptone stimulated an increase in 8-15% lactic acid yield and 10-20% fungal biomass.     

Lactic acid production from xylose by the fungus Rhizopus oryzae

Lignocellulosic biomass is considered nowadays to be an economically attractive carbohydrate feedstock for large-scale fermentation of bulk chemicals such as lactic acid. The filamentous fungus Rhizopus oryzae is able to grow in mineral medium with glucose as sole carbon source and to produce optically pure l(+)-lactic acid. Less is known about the conversion by R. oryzae of pentose sugars such as xylose, which is abundantly present in lignocellulosic hydrolysates. This paper describes the conversion of xylose in synthetic media into lactic acid by ten R. oryzae strains resulting in yields between 0.41 and 0.71 g g⁻¹. By-products were fungal biomass, xylitol, glycerol, ethanol and carbon dioxide. The growth of R. oryzae CBS 112.07 in media with initial xylose concentrations above 40 g l⁻¹ showed inhibition of substrate consumption and lactic acid production rates. In case of mixed substrates, diauxic growth was observed where consumption of glucose and xylose occurred subsequently. Sugar consumption rate and lactic acid production rate were significantly higher during glucose consumption phase compared to xylose consumption phase. Available xylose (10.3 g l⁻¹) and glucose (19.2 g l⁻¹) present in a mild-temperature alkaline treated wheat straw hydrolysate was converted subsequently by R. oryzae with rates of 2.2 g glucose l⁻¹ h⁻¹ and 0.5 g xylose l⁻¹ h⁻¹. This resulted mainly into the product lactic acid (6.8 g l⁻¹) and ethanol (5.7 g l⁻¹).     

Production of lactic acid and byproducts from waste potato starch by <Emphasis Type="Italic">Rhizopus arrhizus</Emphasis>: role of nitrogen sources

Summary Lactic acid was produced by Rhizopus arrhizus using waste potato starch as the substrate. The aim of this study was to identify the role of nitrogen sources and their impact on the formation of lactic acid and associated byproducts. Ammonium sulphate, ammonium nitrate, urea, yeast extract and peptone were assessed in conjunction with various ratios of carbon to nitrogen (C:N). Fermentation media with a low C:N ratio enhanced the production of lactic acid, biomass and ethanol, while a high C:N ratio favoured the production of fumaric acid. Ammonium nitrate appeared to be the most suitable nitrogen source for achieving a high and stable lactic acid yield, and minimizing the production of byproducts such as biomass and ethanol, while urea proved to be the least favourable nitrogen source. Yeast extract and peptone appeared to improve fungal cell growth. The kinetics data revealed that a high concentration of ammonium nitrate enhanced the lactic acid productivity. The maximum lactic acid concentration of 36.4 g/l, representing a yield of 91%, was obtained with addition of 0.909 g/l ammonium nitrate in 32 h.     

Co-production of lactic acid and chitin using a pelletized filamentous fungus Rhizopus oryzae cultured on cull potatoes and glucose

Aims: This paper developed a novel process for lactic acid and chitin co-production of the pelletized Rhzious oryzae NRRL 395 fermentation using underutilized cull potatoes and glucose as nutrient source. Methods and Results: Whole potato hydrolysate medium was first used to produce the highest pelletized biomass yield accompanying the highest chitin content in biomass. An enhanced lactic acid production then followed up using batch, repeated batch and fed batch culture with glucose as carbon source and mixture of ammonia and sodium hydroxide as neutralizer. The lactic acid productivity peaked at 2·8 and 3 g l⁻¹ h⁻¹ in repeated batch culture and batch culture, respectively. The fed batch culture had the highest lactate concentration of 140 g l⁻¹. Conclusions: Separation of the biomass cultivation and the lactic acid production is able to not only improve lactic acid production, but also enhance the chitin content. Cull potato hydrolysate used as a nutrient source for biomass cultivation can significantly increase both biomass yield and chitin content. Significance and Impact of the Study: The three-step process using pelletized R. oryzae fermentation innovatively integrates utilization of agricultural residues into the process of co-producing lactic acid and chitin, so as to improve the efficiency, revenues and cost of fungal lactic acid production.     

Improved oxygen transfer and increased l-lactic acid production by morphology control of Rhizopus oryzae in a static bed bioreactor

Rhizopus oryzae was immobilized on a cotton matrix in a static bed bioreactor. Compared with free cells in a stirred tank bioreactor, immobilized R. oryzae in this bioreactor gave higher lactic acid production but lower ethanol production. The highest lactic acid production rate (2.09 g/L h) with the final concentration of 37.83 g/L from 70 g/L glucose was achieved when operating the bioreactor at 700 rpm and 0.5 vvm air. To better understand the relationship between shear effects (agitation and aeration) and R. oryzae morphology and metabolism, oxygen transfer rate, fermentation kinetics, and lactate dehydrogenase activity were determined. In immobilized cell culture, higher oxygen transfer rate and lactic acid production were achieved but lower lactate dehydrogenase activity was found as compared with those in free cell culture operated at the same conditions. These results clearly imply that mass transport was the rate controlling step in lactic acid fermentation by R. oryzae.     

Optimization of single cell protein production from cassava starch (Rhizopus oligosporus)

The fermentation pattern of cassava starch utilization was investigated at 37°C using Rhizopus oligosporus UQM 145 F and eight different media. Depending on the medium used, the addition of zinc or zinc plus iron to a combination of calcium plus manganese switches the fermentation from glucose accumulation to biomass (single cell protein) production. Complete starch hydrolyzation was obtained in both cases, with a complete glucose utilization resulting in 24 g biomass containing 30% true protein per 100 g cassava starch (= 7.45 g SCP/100 g substrate) in 24 hours. In the case of glucose accumulation, biomass was kept low and 15.5 g/l glucose representing 57.3% of starch supplied were obtained in 36 hours. R. oligosporus UQM 145 F grows well between 30° and 45°C. At 45°C and pH 5.0, 7.0 g SCP/100 g substrate were obtained, which rose to 8.6 g if cassava starch is replaced by ground cassava tuber.     

Comparison of Sucrose-Hydrolyzing Enzymes Produced by Rhizopus oryzae and Amylomyces rouxii

Rhizopus oryzae produces lactic acid from glucose but not efficiently from sucrose, while Amylomyces rouxii, a species closely related to R. oryzae, ferments these sugars equally. The properties of two sucrose-hydrolyzing enzymes purified from culture filtrates of R. oryzae NBRC 4785 and A. rouxii CBS 438.76 were compared to assess lactic acid fermentation by the two fungi. The substrate specificity of the enzymes showed that the enzymes from strains NBRC 4785 and CBS 438.76 are to be classified as glucoamylase and invertase respectively. The entity of the enzyme from strain NBRC 4785 might be a glucoamylase, because eight residues of the N-terminal amino acid sequence coincided with those of the deduced protein from the amyB gene of R. oryzae. The enzyme from NBRC 4785 was more unstable than that from strain CBS 438.76 under conditions of lower pH and higher temperature. These observations mean that the culture conditions of R. oryzae for lactic acid production from sucrose should be strictly controlled to prevent inactivation of the glucoamylase hydrolyzing sucrose.     

Enhancement and modeling of microparticle-added <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> lactic acid production

Lactic acid has a wide industrial application area and can be produced by fungal strains. However, excessive bulk growth form of fungi during the fermentations is a major problem, which limits the fermentation performance. Microparticles are excellent tools to prevent bulk fungal growth and provide homogenized fermentation broth to increase uniformity and the prediction performance of the models. Therefore, in this study, addition of aluminum oxide and talcum microparticles into fermentations was evaluated to enhance the production of lactic acid by Rhizopus oryzae. The results showed that the bulk fungal growth was prevented and the lactic acid concentration increased from 6.02 to 13.88 and 24.01 g/L, when 15 g/L of aluminum oxide or 10 g/L of talcum was used, respectively, in the shake-flask fermentations. Additionally, substrate concentration, pH, and agitation were optimized in the bioreactors using response surface methodology, and optimum values were determined as 126 g/L of glucose, 6.22 pH, and 387 rpm, respectively. Under these conditions, lactic acid production further increased to 75.1 ± 1.5 g/L with 10 g/L of talcum addition. Also, lactic acid production and glucose consumption in the batch fermentation were successfully modeled with modified Gompertz model and modified logistic model. RMSE and MAE values for lactic acid production were calculated as 2.279 and 1.498 for the modified Gompertz model; 3.6 and 4.056 for the modified logistic model. Additionally, modified logistic model predicted glucose consumption with ?2.088 MAE and 2.868 RMSE, whereas these values were calculated as 2.035 and 3.946 for the modified Gompertz model.     

Role of the pectinolytic enzyme in the lactic acid fermentation of potato pulp by<Emphasis Type="Italic"> Rhizopus oryzae</Emphasis>

Rhizopus oryzae strain NBRC 4707 produced lactic acid and ethanol more efficiently than strain NRRL 395 in potato pulp, an agricultural by-product of the starch industry. The two strains developed comparable activities of xylanase, cellulase, -amylase, and glucoamylase, while the polygalacturonase activity of strain NBRC 4707 was double that of strain NRRL 395. The addition of commercial pectinase enhanced the formation of metabolites, suggesting that the degradation of pectic substances determines the fermentation of potato pulp by R. oryzae. Orange and apple peel were more effective in the induction of polygalacturonase activity than potato pulp, sugarbeet pulp, or wheat bran when used as a principal carbon source for fungal growth in a solid-state culture. The fungal cells in both types of fruit peel stimulated the fermentation of potato pulp and increased the quantity of lactic acid and ethanol to higher levels than those in other agricultural by-products.     

Production of lactic acid and ethanol by Rhizopus oryzae integrated with cassava pulp hydrolysis

Cassava pulp was hydrolyzed with acids or enzymes. A high glucose concentration (>100 g/L) was obtained from the hydrolysis with 1 N HCl at 121 °C, 15 min or with cellulase and amylases. While a high glucose yield (>0.85 g/g dry pulp) was obtained from the hydrolysis with HCl, enzymatic hydrolysis yielded only 0.4 g glucose/g dry pulp. These hydrolysates were used as the carbon source in fermentation by Rhizopus oryzae NRRL395. R. oryzae could not grow in media containing the hydrolysates treated with 1.5 N H₂SO₄ or 2 N H₃PO₄, but no significant growth inhibition was found with the hydrolysates from HCl (1 N) and enzyme treatments. Higher ethanol yield and productivity were observed from fermentation with the hydrolysates when compared with those from fermentation with glucose in which lactic acid was the main product. This was because the extra organic nitrogen in the hydrolysates promoted cell growth and ethanol production.     

Physiological restriction of the L-lactic acid production by Rhizopus arrhizus

The influence of basic physiological factors on the quality of inocula and L(+)-lactic acid production by Rhizopus arrhizus CCM 81 09 were studied. The most effective preparation of the spores (5 × 10⁷ spores/ml) and subsequent good lactate production was achieved on the agar medium with soil extract and malt agar. The optimum initial amount of active spores for inoculation was 10³–10⁴ spores/ml. The preparation of inoculum required intensive stirring with lower aeration and pH maintained in the range from 4.8 to 6.0 by the addition of CaCO₃. The maximum yield of lactic acid production was achieved by using 5% (v/v) of 24-h-old inoculum. The intensity of lactic acid production in the inoculum was proportional to its production in the subsequent steps of fermentation and can be used as a fast control of the physiological state of the producers.     

Lactic acid and animal feeds production from Sophora flavescens residues by Rhizopus oryzae fermentation

In this study, the feasibility of producing lactic acid and animal feeds from Sophora flavescens residues (SFR) by Rhizopus oryzae was explored. Results showed that the simultaneous saccharification and fermentation (SSF) is the optimal fermentation mode, which was simple and high-efficiency. When the inoculation volume of R. oryzae was 10 % and the pH value was adjusted by adding CaCO₃ in stages during SSF, the maximum concentration of lactic acid was 46.78 g/L, and the maximum lactic acid productivity reached 0.97 g/L/h. Results also showed that the protein content of the solid residues after fermentation of R. oryzae reached 12.15 %. This content was 46 times higher than that by the original SFRs and nearly 4.3 times the protein content of the solid residues after fermentation by Enterococcus faecium. In addition, the solid residues after fermentation rich in Fe and Zn could be used as animal feeds or feed additives. Thus, it is expected that this study may provide a novel approach for Chinese medicine residues treatment towards full resource recovery.     

Effects of neutralizing agents on lactic acid production by Rhizopus oryzae using sweet potato starch

A neutralizing agent is usually employed to counteract the pH reduction during lactic acid fermentation by Rhizopus oryzae. Calcium carbonate (CaCO₃) is used as such a pH controlling agent. The low solubility of CaCO₃ in the fermentation broth could however lead to low efficiency in pH control and cause problems in the subsequent purification process. Therefore, an alternative agent in place of CaCO₃ was examined in this study. The effect of four different neutralizing agents, including CaCO₃, sodium hydroxide (NaOH), ammoniacal solution and sodium bicarbonate (NaHCO₃) on lactic acid production and the morphology of the pellets were investigated. Results indicated that CaCO₃ was still the preferred choice, because of the pellet morphology and the highest lactic acid concentration (43.3 g/L) obtained in the batch using 60 g/L of sweet potato starch as feedstock. It is noteworthy that the lactic acid purification is relatively easier when using NaHCO₃ instead of CaCO₃, due to the higher solubility of sodium lactate than calcium lactate. Therefore, even the batch with CaCO₃ had a slightly higher productivity (1.23 g/L/h) than the batch with NaHCO₃ (1.14 g/L/h), NaHCO₃ might be the first choice for process designers whenever recovery is vital.     

Optimization of the Process for the Production of L(+)‐Lactic Acid from Cull Potato by Rhizopus oryzae

Cull potato is currently an under‐utilized biomass in the potato processing states of the USA. L(+)‐Lactic acid production by three Rhizopus strains and one homofermentative, facultative anaerobic Lactobacillus amylophilus strain was investigated using potatoes as the sole nutrient supply in the culture medium. Rhizopus oryzae NRRL 395 was chosen as the strain for further studies because it showed the highest lactate yield. The fermentation conditions for seed cultures were studied for three treatment structures using a completely randomized design. Optimum conditions for the seed culture were determined to be 2 % potato medium, 10⁴ spores/mL concentration, and 24 h of fermentation. Plackett‐Burman and central composite designs were used to screen and optimize the factors for lactic acid production. Substrate (potato) concentration, fermentation temperature, and shaking speed were found to be the most significant factors affecting both the yield and concentration of lactate. Optimum values for substrate concentration, fermentation temperature, and shaking speed were 10 %, 27 °C, and 170 rpm, respectively. Under these optimum conditions, the lactate concentration was predicted by the model to be 35.5 g/L, which was verified by the experimental data (33.3 g/L). The results indicate that cull potato can be an effective feedstock for R. ryzae NRRL 395 in the production of lactic acid.     

Biomass production,carbon and oxygen consumption by Rhizopus arrhizus grown in submerged cultures on thin liquid films or immobilized on fibrous and particulate materials

Summary Oxygen consumption of Rhizopus arrhizus cultures was studied in order to understand why anaerobic-type metabolism takes place during growth, with high lactic acid synthesis. Rather than insufficient oxygen supply, pellet-type morphology was found to be responsible. Cultures with carriers and on thin liquid films were investigated with very good results for the second method. Not only was biomass production improved, but also carbon consumption was higher and lactic acid synthesis less compared with traditional submerged flask cultures. Offprint requests to: J. C. Roux     

l-Lactic acid production from liquefied cassava starch by thermotolerant Rhizopus microsporus: Characterization and optimization

The thermotolerant Rhizopus microsporus DMKU 33 capable of producing l-lactic acid from liquefied cassava starch was isolated and characterized for its phylogenetic relationship and growth temperature and pH ranges. The concentrations of (NH₄)₂SO_4, KH₂PO₄, MgSO₄ and ZnSO₄·7H₂O in the fermentation medium was optimized for lactic acid production from liquefied cassava starch by Rhizopus microsporus DMKU 33 in shake-flasks at 40 °C. The fermentation was then studied in a stirred-tank bioreactor with aeration at 0.75 vvm and agitation at 200 rpm, achieving the highest lactic acid production of 84 g/L with a yield of 0.84 g/g at pH 5.5 in 3 days. Lactic acid production was further increased to 105–118 g/L with a yield of 0.93 g/g and productivity of 1.25 g/L/h in fed-batch fermentation. R. microsporus DMKU 33 is thus advantageous to use in simultaneous saccharification and fermentation for l-lactic acid production from low-cost starchy substrates.