Overexpression of two cold-responsive ATAF-like NAC transcription factors from fine-stem stylo (<Emphasis Type="Italic">Stylosanthes guianensis</Emphasis> var. <Emphasis Type="Italic">intermedia</Emphasis>) enhances cold tolerance in tobacco plants

Tissue culture data is non-linear in nature. Decision tree algorithms stand out in revealing the non-linear interactions and relationships between the predictors and responses. Classification and regression tree (CART), chi squared automatic interaction detector (CHAID) and exhaustive CHAID are the common decision tree algorithms. These three models were employed to predict and optimize the effect of minor mineral nutrients on shoot cultures of Corylus avellana L. cultivars. H₃BO₃, CuSO₄·5H₂O, MnSO₄·H₂O, Na₂MoO₄·2H₂O and Zn(NO₃)₂·6H₂O were tested in a range of 0.5?×?to 4?×?Driver and Kuniyuki (DKW) medium within a RSM optimal design. NiSO₄·6H₂O was also an input within the design with varying levels of 0 to 6 µM. Shoot quality and length were affected by genotype, B and Mo amounts. Multiplication rate depended on genotype, B, Zn and Cu levels. Callus formation was affected by genotype and B. Leaf size depended on genotype, Zn and Mn concentrations. Cu was a significant predictor of leaf color and Ni slightly improved SPAD readings (chlorophyll content). CART in general outperformed CHAID and exhaustive CHAID in terms of the predictive performance. Both CHAID and exhaustive CHAID failed to generate a tree model for a leaf size response. The optimal minor nutrients for hazelnuts based on the predictions of the CART algorithm were suggested to be: B 2.3?×?DKW, Cu 0.5×, Mn 0.5×, 2?×?Mo and Zn 2×.     

Modeling optimal mineral nutrition for hazelnut micropropagation

Micropropagation of hazelnut (Corylus avellana L.) is typically difficult because of the wide variation in response among cultivars. This study was designed to determine the required mineral nutrient concentrations for micropropagation of C. avellana cultivars using a response surface design analysis. Driver and Kuniyuki Walnut (DKW) medium mineral nutrients were separated into five factors: NH₄NO₃, Ca(NO₃)₂, mesos (MgSO₄ and KH₂PO₄), K₂SO₄, and minor nutrients (boron, copper, manganese, molybdenum, and zinc) ranging from 0.5× to 2× the standard DKW medium concentrations with 33 treatments for use in modeling. Overall quality and shoot length for all cultivars were influenced by ammonium and nitrate nitrogen, mesos and minors. Reduced Ca(NO₃)₂ improved multiplication while higher amounts increased shoot length for most cultivars. Uptake of nutrients varied among the cultivars. Calcium and magnesium concentrations were greater in the shoots that grew well compared to poorly-growing and control treatments. All five cultivars showed improved growth on some treatments and the models indicated that shoots grown on an optimized medium would be even better. This model indicates that NH₄NO₃, Ca(NO₃)₂, mesos, and minors all had significant effects on hazelnut growth and multiplication and should be optimized in future experiments.     

Use of RSM and CHAID data mining algorithm for predicting mineral nutrition of hazelnut

Defining optimal mineral-salt concentrations for in vitro plant development is challenging, due to the many chemical interactions in growth media and genotype variability among plants. Statistical approaches that are easier to interpret are needed to make optimization processes practical. Response Surface Methodology (RSM) and the Chi-Squared Automatic Interaction Detection (CHAID) data mining algorithm were used to analyze the growth of shoots in a hazelnut tissue-culture medium optimization experiment. Driver and Kuniyuki Walnut medium (DKW) salts (NH₄NO₃, Ca(NO₃)₂·4H₂O, CaCl₂·2H₂O, MgSO₄·7H₂O, KH₂PO₄ and K₂SO₄) were varied from 0.5× to 3× DKW concentrations with 42 combinations in a IV-optimal design. Shoot quality, shoot length, multiplication and callus formation were evaluated and analyzed using the two methods. Both analyses indicated that NH₄NO₃ was a predominant nutrient factor. RSM projected that low NH₄NO₃ and high KH₂PO₄ concentrations were significant for quality, shoot length, multiplication and callus formation in some of the hazelnut genotypes. CHAID analysis indicated that NH₄NO₃ at ≤1.701× DKW and KH₂PO₄ at >2.012× DKW were the most critical factors for shoot quality. NH₄NO₃ at ≤0.5× DKW and Ca(NO₃)₂ at ≤1.725× DKW were essential for good multiplication. RSM results were genotype dependent while CHAID included genotype as a factor in the analysis, allowing development of a common medium rather than several genotype specific media. Overall, CHAID results were more specific and easier to interpret than RSM graphs. The optimal growth medium for Corylus avellana L. cultivars should include: 0.5× NH₄NO₃, 3× KH₂PO₄, 1.5× Ca(NO₃)₂.     

Reduced major minerals and increased minor nutrients improve micropropagation in three apple cultivars

Mineral nutrient medium requirements for propagation of in vitro shoots of apple (Malus domestica Borkh) ‘Golden Delicious’, ‘Maksat’, and ‘Voskhod’ were studied using response surface methodology (RSM). The mineral nutritional factors evaluated were based on Murashige and Skoog (MS) mineral nutrients (NH₄NO₃, KNO₃, CaCl₂, KH₂PO₄, MgSO₄, and minor nutrients), with concentrations ranging from 0.5 to 3.0× the MS concentrations. Nine plant growth qualities were evaluated. The most significant factors were NH₄NO₃ at 0.5 to 1.0× MS, and minor nutrients at 2.0× MS. Most of the other factors were optimal at 0.5×. The quality rating was highest when minor nutrients were 2.0× MS, and most other nutrients were standard concentrations or lower. Increased KH₂PO₄ and minor nutrients were the most significant for improved multiplication, and higher KNO₃ for shoot length. Optimized media were developed for each cultivar based on these models. The cultivars were grown on the three individual optimized media, a general medium based on the three optimizations, and MS. The optimized medium for each cultivar was significantly better for shoot quality and shoot length of each cultivar than MS, but the generalized medium of minors at 2.0× and NH₄NO₃, CaCl₂, and MgSO₄ at 0.5× MS, was significantly better for two of the three cultivars and not significantly different for the third. The next step to develop a final optimized medium will require the evaluation of the minor nutrients, determination of optimal concentrations of each, and screening a wide range of Malus germplasm on the finalized medium.

     

Maturation and germination of walnut somatic embryos

Walnut somatic embryos were multiplied by repetitive embryogenesis on a solid basal DKW medium at 25°C in the dark. When the embryos were isolated at early cotyledonary stage (1–2 mm long) from the primary embryos and cultured on the medium for 3 weeks, they developed into mature embryos showing white, enlarged cotyledons and shoot and root apex. After transfer to light on solid germination medium, however, few mature embryos (0–5%) germinated. Germination percentage increased to about 10% when the mature embryos were pretreated by a storage at 4°C in the dark for 2 months, or by desiccation at 25°C in the dark for 3 or 5 days under an air-humidity conditioned by saturated salt solutions (Mg(NO₃)₂.6H₂O, or ZnSO₄.7H₂O). Similar results were obtained by the addition of gibberellic acid (GA₃) to the germination medium. When mature embryos were desiccated and then placed on medical cotton compresses in liquid germination medium, 45% of the embryos germinated into complete plantlets. These plantlets continued their growth after transplanting to a mixture of peat and vermiculite in pots.Abbreviations GA₃ gibberellic acid - DKW medium Driver & Kuniyuki Walnut medium     

Plant regeneration from alginate-encapsulated shoot tips of Phylianthus amarus schum and thonn, a medicinally important plant species

Summary A method was developed for plant regeneration from alginate-encapsulated shoot tips of Phyllanthus amarus. Shoot tips excised from in vitro proliferated shoots were encapsulated in calcium alginate beads. The best gel complexation was achieved using 3% sodium alginate and 75 mM CaCl₂·2H₂O. Maximum percentage response for conversion of encapsulated shoot tips into plantlets was 90% after 5 wk of culture on Murashige and Skoog (MS) medium without plant growth regulator. The regrowth ability of encapsulated shoot tips was affected by the concentration of sodium alginate, storage duration, and the presence or absence of MS nutrients in calcium alginate beads. Plantlets with well-developed shoot and roots were transferred to pots containing an autoclaved mixture of soilrite and peat moss (1∶1). The conversion of encapsulated shoot tips into plantlets also occurred when calcium alginate beads were directly sown in autoclaved soilrite moistened with 1/4-MS salts. Encapsulation of vegetative propagules in calcium alginate beads can be used as an alternative to synthetic seeds derived from somatic embryos.     

Improving in vitro mineral nutrition for diverse pear germplasm

Mineral nutrition in the media used for growth of in vitro plants is often difficult to optimize due to complex chemical interactions of required nutrients. The response of plant tissue to standard growth media varies widely due to the genetic diversity of the plant species studied. This study was designed as the initial step in determining the optimal mineral nutrient requirements for micropropagation of shoot tips from a collection of genetically diverse pear germplasm. Five mineral nutrient factors were defined from Murashige and Skoog salts: NH₄NO₃, KNO₃, mesos (CaCl₂·2H₂0–KH₂PO₄–MgSO₄), micronutrients (B, Cu, Co, I, Mn, Mo, and Zn), and Fe-EDTA. Each factor was varied over a range of concentrations. Treatment combinations were selected using response surface methods. Five pears in three species (Pyrus communis ‘Horner 51,’ ‘Old Home?×?Farmingdale 87,’ ‘Winter Nelis,’ Pyrus dimorphophylla, and Pyrus ussuriensis ‘Hang Pa Li’) were grown on each treatment combination, responses were measured, and each response was analyzed by analysis of variance. The analyses resulted in the identification of the following factors with the single largest effects on plant response: shoot quality (mesos), leaf spotting/necrosis (mesos), leaf size (mesos), leaf color (mesos, NH₄NO₃, and KNO₃), shoot number (NH₄NO₃ and Fe), nodes (NH₄NO₃ and KNO₃), and shoot length (mesos and Fe). Factors with the largest effects (mesos and Fe) were similar among the genotypes. This approach was very successful for defining the appropriate types and concentrations of mineral nutrients for micropropagation of diverse pear genotypes.     

Effect of enhanced CaCl2, MgSO4, and KH2PO4 on improved in vitro growth of potato

Potato (Solanum tuberosum L.) is a major global food crop. Contemporary potato production largely utilizes micropropagation to produce healthy seed potatoes. The micropropagation of potatoes is widely achieved through nodal explants using the conventional Murashige and Skoog (MS) medium. Currently, effective culture media that can facilitate rapid propagation are increasingly required for new cultivars that have been developed to possess improved traits. In this study, we evaluated the effect of enhanced meso nutrients (CaCl₂.2H₂O, MgSO₄, and KH₂PO₄) in MS medium on the growth of S. tuberosum. The cultivars used in this study were representative of Japanese, European, and Peruvian lines. Enhanced meso nutrients improved the overall quality of all cultivars, as indicated by longer shoots and larger leaves with dark color, compared with MS medium only. Shoots grown on enhanced mesos were approximately 1.5 times longer than on MS medium. Quantitative ion analysis revealed that plantlets with improved shoot length and leaf quality in most cultivars had increased calcium, magnesium, potassium, and phosphorus uptake than plantlets on MS medium. The results suggest that the reduced iron uptake on 3.0×MS, compared with 2.0× or 2.5×MS mesos, reduced plant growth. This study revealed for the first time that mesos concentrations higher than MS medium concentrations, complemented by enhanced calcium, magnesium, potassium, phosphorus, and iron uptake, play a significant role in improving the in vitro growth of potato.     

Metal(II) complexes of 1-formylisoquinoline thiosemicarbazone: their preparation,characterization and antitumour activity

Complexes of Co(II), Ni(lI), Cu(II), Zn(II) and Pt(II) with 1-formylisoquinoline thiosemicarbazone (1-iqtsc-H) were prepared and characterized by elemental analyses, conductance measurement and spectral studies. On the basis of these studies a distorted octahedral structure for [Co(1-iqtsc)₂]·2H₂O, a distorted trigonal-bipyramidal structure for [Ni- (1-iqtsc-H)Cl₂], [Cu(1-iqtsc-H)Cl₂] and [Zn(1-iqtsc- H)(OAc)₂]·H₂O and a square-planar structure for [Pt(1-iqtsc)Cl] are suggested. All these metal(II) complexes were screened for their antitumour activity in the P388 lymphocytic leukaemia test system in mice. Except for Pt(Il), the complexes were found to possess significant activity; the Ni(II) complex showed a T/C value of 161 at the optimum dosage.     

Chemically defined media for growth and sporulation of Entomophthora virulenta

Amino acids, salts, and vitamins were combined with dextrose to test their effect on growth and sporulation of Entomophthora virulenta in liquid shake culture. The addition of a vitamin solution to the tested media did not enhance growth or sporulation. MgSO₄·7H₂O was the only salt individually tested that allowed for good growth and sporulation. MgSO₄·7H₂O concentrations exceeding 250 mg/liter in media lacking other salts inhibited sporulation. A simple medium of l-arginine, l-leucine, glycine, and mineral salts allowed high growth and sporulation.     

Response surface methodology for optimization of medium components in submerged culture of Aspergillus flavus for enhanced heparinase production

Aims: Aim of the study was to develop a medium for optimal heparinase production with a strain of Aspergillus flavus (MTCC‐8654) by using a multidimensional statistical approach. Methods and Results: Statistical optimization of intracellular heparinase production by A. flavus, a new isolate, was investigated. Plackett–Burman design was used to evaluate the affect of medium constituents on heparinase yield. The experimental results showed that the production of heparinase was dependent upon heparin, the inducer; chitin, structurally similar to heparin and NH₄NO_3, the nitrogen source. A central composite design was applied to derive a statistical model for optimizing the composition of the fermentation medium for the production of heparinase enzyme. The optimum fermentation medium consisted of (g l^?1) Mannitol, 8·0; NH₄NO₃, 2·5; K₂HPO₄, 2·5; Na₂HPO₄, 2·5; MgSO₄.7H₂O, 0·5; Chitin, 17·1; Heparin, 0·6; trace salt solution (NaMoO₄.2H₂O, CoCl₂.6H₂O, CuSO₄.5H₂O, FeSO₄.7H₂O, CaCl₂), 10^?4 mol l^?1. Conclusions: A 2·37‐fold increase in heparinase production was achieved in economic and effective manner by the application of statistical designs in medium optimization. Significance and Impact of the Study: Heparinase production was doubled by statistical optimization in a cost‐effective manner. This heparinase can find application in pharmaceutical industry and for the generation of low‐molecular‐weight heparins, active as antithrombotic and antitumour agents.     

Mineral nutrition ofAspergillus niger for citric acid production

The mineral requirements of a strain ofAspergillus niger for the production of citric acid in a synthetic medium were studied. It was observed that K₂HPO₄ and MgSO₄.7 H₂O were required at concentrations of 0.1% and 0.02% respectively. The optimum level of each of the trace elements Fe, Mn and Zn was 1.0 μg/ml. NaCl and CaCl₂ at lower concentrations had no effect on citric acid production. Trace elements, Cu, Co and Mo, had an adverse effect on the production of citric acid while Ni and V were without effect.     

Nickel,cobalt, and molybdenum requirement for growth of Methanobacterium thermoautotrophicum

Growth of Methanobacterium thermoautotrophicum on H₂ and CO₂ as sole energy and carbon sources was found to be dependent on Ni, Co, and Mo. At low concentrations of Ni (<100 nM), Co (<10 nM) and Mo (<10 nM) the amount of cells formed was roughly proportional to the amount of transition metal added to the medium; for the formation of 1 g cells (dry weight) approximately 150 nmol NiCl₂, 20 nmol CoCl₂ and 20 nmol Na₂MoO₄ were required. A dependence of growth on Cu, Mn, Zn, Ca, Al, and B could not be demonstrated. Conditions are described under which the bacterium grew exponentially with a doubling time of 1.8 h up to a cell density of 2 g cells (dry weight)/1.     

Mineral nutrition and in vitro growth of Gerbera hybrida (Asteraceae)

The effects of mineral nutrient were examined on in vitro growth of Gerbera hybrida (G. jamesonii?×?G. viridifolia), specifically Gerbera hybrida cv. Pasadena. Four types of experiments were conducted to quantify the effects of mineral nutrients on four in vitro growth responses (quality, shoot number, leaf number, and shoot height) of gerbera and included groups of mineral nutrients (macros/mesos, micros, and Fe), individual salts (CuSO₄·5H₂O, MnSO₄·4H₂O, ZnSO₄·7H₂O, and Fe/EDTA), and the specific ions NO₃ ^?, NH₄ ⁺, and K⁺. Experiments included mixture-amount designs that are essential for separating the effects of proportion and concentration. Highly significant effects were observed in all experiments, but the mineral nutrients with the largest effects varied among the four growth responses. For example, leaf number was strongly affected by the macronutrient group in one experiment and by NH₄ ⁺ and K⁺, which were in the macronutrient group, in the NO₃ ^?/NH₄ ⁺/K⁺ ion-specific experiment, whereas quality was strongly affected by the micronutrients ZnSO₄ and Fe/EDTA. Because mineral nutrient effects varied significantly with the response measured, defining an appropriate formulation requires a clear definition of “optimal” growth.     

Effects of minerals on the production of valine byAerobacter aerogenes

A study has been made on the mineral requirements of a strain ofAerobacter aerogenes for the production of valine. It was observed that K₂HPO₄ and MgSO₄]. 7 H₂O were required at concentrations of 0.1% and 0.05% respectively while the optimum level of each of the trace elements Fe and Mo was 1 μg/ml. NaCl, KCl and trace elements like Mn, Ni, Co, Cu and Zn had an adverse effect on the production of valine. The requirements for metals except Mg for growth of the organism and valine production are different.     

Anticandidal cytotoxicity,antitumor activities,and purified cell wall modulation by novel Schiff base ligand and its metal (II) complexes against some pathogenic yeasts

The preparation of metal (II) complexes [CoCl₂·6H₂O, Ni(CH₃COO)₂·4H₂O, Cu(CH₃COO)₂·2H₂O, and Zn (CH3COO)₂ ·2H₂O] with 2[N-(cinnamlidene) amino]-5-nitro phenol as a novel ligands and their biological evaluation against candida species was studied. The inhibitory effects of the tested metal complexes were tested against six pathogenic yeasts (Candida albicans, C. fructus, C. glabrata, C. oleophila, C. parapsilosis, and C. tropicalis). The effect of the most efficient metal complex (Zn(II) complex) was more pronounced at 1.25 μg/ml, while Ni(II) complex was exhibited the least suppressive effect. Co(II) and Zn(II) complexes act as potential antitumor agents, while Zn(II) complex has shown promising cytotoxic activity with slow candidal respiration rate. Addition of Zn(II) complex leading to suppression of cell wall components in all candidal cells accompanied with leaking out of amino acids. Purification of the cell wall mannoprotein of C. glabrata treated with Zn(II) complex was established, resulting one pure fissured protein peak. Cell wall protein modulation was showed by appearance of two new protein bands with molecular weights of 72 and 39 KDa in C. glabrata cells treated with Zn(II) complex compared with one pure protein band 55.6 KDa in the non treated yeast cell.     

Synthesis and crystal structure of (pipzH2)2Mo2Cl8·4H2O (pipz = piperazine)

The title compound (pipzH₂)₂Mo₂Cl₈·4H₂O (pipz = piperazine),was isolated from the solution of (morphH)₂Mo₂Cl₆(H₂O)₂ in HCl 1:1 by addition of (pipzH₂)Cl₂. This reaction indicates the reversibility of the substitution of chloride ions in Mo₂Cl₈^4? by water molecules. (pipzH₂)₂Mo₂Cl₈·4H₂O crystallizes in the Pbca space group, with a = 15.154(2), b = 13.170(2), c = 12.208(2) Å and Z = 4. The structure was solved by the Patterson method and refined to the unweighted and weighted residuals of 0.050 and 0.048. The crystal structure is built form Mo₂Cl₈^4?, (pipzH₂)²⁺ and H₂O. The MoMo distance of 2.129(3) Å is the shortest one found in all structurally-characterised Mo₂X₈^4? (X = Cl, Br) anions. Four independent MoCl distances are 2.456(3), 2.445(3), 2.463(4) and 2.455(4) Å. The (pipzH₂²⁺ exists in a usual chair conformation. There is a network of hydrogen bonds of the type NH?Cl, NH?O, OH?Cl and OH?O between the ions and water molecules.     

Growth of the Peritrich Opercularia coarctata in Axenic Culture*

A synthetic medium for Opercularia coarctata was developed that contains 20 amino acids, 10 vitamins, an 8-component balanced salt solution, Fe₂(SO₄)₃·(NH₄)₂SO₄·24H₂O, Tween 80, stigmasterol, a 7-component nucleic acid mixture, phenol red as an indicator, and 2,500 U.S.P. units/ml penicillin to maintain sterility. This medium supported axenic survival for 96 hr. Multiple supplements of thioctic acid, niacin, niacinamide, inositol, PABA, oleic acid, and Fe(NO₃)₂·9H₂O instead of Fe₂(SO₄)₃·(NH₄)₂SO₄·24H₂O coverted the survival medium into a growth medium, which permitted 36–45 days continuous cultivation of populations in excess of 4 × 10³ cells/3.0 ml final volume. Five generations were produced during the 48 hr logarithmic growth period. Serial transfers at 72 hr and during periods of greatest cell density produced a maximum of 8 generations 96 hr after initiation but the medium failed to sustain growth through more than 6 serial transfers. Extension of this investigation to formulating a minimal axenic medium is discussed.     

Determination of superoxide dismutase-like activity in some divalent metal saccharinates

The superoxide-dismutase-like activity of a series of divalent metal saccharinates of general stoichiometry [M^II(Sac)₂(H₂O)₄]·2H₂O (with M^II=Mn,Fe,Co,Ni,Cu,Zn) has been investigated using the nitroblue tetrazolium O ₂ ⁻ reduction assay. The results show that all these complexes possess the capability to dismutate the superoxide anion generated in the xanthine/xanthine oxidase system. Interestingly, the greatest activity is shown by the corresponding copper complex. The results are discussed and compared with those obtained for native superoxide dismutase, which was tested under the same experimental conditions. Dedicated to Prof. Pedro J. Aymonino on the occasion of his 65^th birthday.     

Efficient itaconic acid production by Aspergillus terreus: Overcoming the strong inhibitory effect of manganese

Itaconic acid (IA), a building block platform chemical, is produced industrially by Aspergillus terreus utilizing glucose. Lignocellulosic biomass can serve as a low cost source of sugars for IA production. However, the fungus could not produce IA from dilute acid pretreated and enzymatically saccharified wheat straw hydrolyzate even at 100-fold dilution. Furfural, hydroxymethyl furfural and acetic acid were inhibitory, as is typical, but Mn²⁺ was particularly problematic for IA production. It was present in the hydrolyzate at a level that was 230 times over the inhibitory limit (50 ppb). Recently, it was found that PO₄³⁻ limitation decreased the inhibitory effect of Mn²⁺ on IA production. In the present study, a novel medium was developed for production of IA by varying PO₄³⁻, Fe³⁺ and Cu²⁺ concentrations using response surface methodology, which alleviated the strong inhibitory effect of Mn²⁺. The new medium contained 0.08 g KH₂PO₄, 3 g NH₄NO₃, 1 g MgSO₄·7H₂O, 5 g CaCl₂·2 H₂O, 0.83 mg FeCl₃·6H₂O, 8 mg ZnSO₄·7H₂O, and 45 mg CuSO₄·5H₂O per liter. The fungus was able to produce IA very well in the presence of Mn²⁺ up to 100 ppm in the medium. This medium will be extremely useful for IA production in the presence of Mn²⁺. This is the first report on the development of Mn²⁺ tolerant medium for IA production by A. terreus.