Simple and efficient genomic DNA extraction protocol for molecular characterisation of Phytophthora colocasiae causing taro leaf blight

Genomic DNA extraction protocol with relatively high quantity and purity is prerequisite for the successful molecular identification and characterisation of plant pathogens. Conventional DNA extraction methods are often time-consuming and yield only very poor quantity of genomic DNA for samples with higher mycelial age. In our laboratory, we have aimed at establishing an efficient DNA isolation procedure, exclusively for the oomycete pathogen Phytophthora colocasiae causing serious leaf blight disease in taro. For this a phenol free protocol was adopted, which involves SDS/Proteinase K-based inactivation of protein contaminants, extraction of nucleic acids using chloroform: isoamyl alcohol and later precipitation of genomic DNA using isopropanol and sodium acetate. The purity of the isolated DNA was analysed by A_260/280 and A_260/230 spectrophotometric readings and confirmed by restriction digestion with restriction enzyme Eco RI. In this study, a comparative assessment was done with CTAB method and the commercial genomic DNA purification kit (Thermo Fisher Scientific, Fermentas, EU). The extracted DNA was found to be suitable for further downstream applications like ITS amplification of the rDNA ITS region and PCR amplification with species-specific primers.     

Whole genome sequencing of marine organisms by Oxford Nanopore Technologies: Assessment and optimization of HMW‐DNA extraction protocols

Marine habitats are Earth''s largest aquatic ecosystems, yet little is known about marine organism''s genomes. Molecular studies can unravel their genetics print, thus shedding light on specie''s adaptation and speciation with precise authentication. However, extracting high molecular weight DNA from marine organisms and subsequent DNA library preparation for whole genome sequencing is challenging. The challenges can be explained by excessive metabolites secretion that co‐precipitates with DNA and barricades their sequencing. In this work, we sought to resolve this issue by describing an optimized isolation method and comparing its performance with the most commonly reported protocols or commercial kits: SDS/phenol–chloroform method, Qiagen Genomic Tips kit, Qiagen DNeasy Plant mini kit, a modified protocol of Qiagen DNeasy Plant kit, Qiagen DNeasy Blood and Tissue kit, and Qiagen Qiamp DNA Stool mini kit. Our method proved to work significantly better for different marine species regardless of their shape, consistency, and sample preservation, improving Oxford Nanopore Technologies sequencing yield by 39 folds for Spirobranchus sp. and enabling generation of almost 10 GB data per flow cell/run for Chrysaora sp. and Palaemon sp. samples.     

Comparing DNA Extraction Methods for Analysis of Botanical Materials Found in Anti-Diabetic Supplements

A comparative performance evaluation of DNA extraction methods from anti-diabetic botanical supplements using various commercial kits was conducted, to determine which produces the best quality DNA suitable for PCR amplification, sequencing and species identification. All plant materials involved were of suboptimal quality showing various levels of degradation and therefore representing real conditions for testing herbal supplements. Eight different DNA extraction methods were used to isolate genomic DNA from 13 medicinal plant products. Two methods for evaluation, DNA concentration measurements that included absorbance ratios as well as PCR amplifiability, were used to determine quantity and quality of extracted DNA. We found that neither DNA concentrations nor commonly used UV absorbance ratio measurements at A ₂₆₀/A ₂₈₀ between 1.7 and 1.9 are suitable for globally predicting PCR success in these plant samples, and that PCR amplifiablity itself was the best indicator of extracted product quality. However, our results suggest that A ₂₆₀/A ₂₈₀ ratios below about 1.3 and above 2.3 indicated a DNA quality too poor to amplify. Therefore, A ₂₆₀/A ₂₈₀ measurements are not useful to identify samples that likely will amplify but can be used to exclude samples that likely will not amplify reducing the cost for unnecessarily subjecting samples to PCR. The two Nucleospin^® plant II kit extraction methods produced the most pure and amplifiable genomic DNA extracts. Our results suggest that there are clear, discernable differences between extraction methods for low quality plant samples in terms of producing contamination-free, high-quality genomic DNA to be used for further analysis.     

Evaluating genomic DNA extraction methods from human whole blood using endpoint and real-time PCR assays

The extraction of genomic DNA is the crucial first step in large-scale epidemiological studies. Though there are many popular DNA isolation methods from human whole blood, only a few reports have compared their efficiencies using both end-point and real-time PCR assays. Genomic DNA was extracted from coronary artery disease patients using solution-based conventional protocols such as the phenol–chloroform/proteinase-K method and a non-phenolic non-enzymatic Rapid-Method, which were evaluated and compared vis-a-vis a commercially available silica column-based Blood DNA isolation kit. The appropriate method for efficiently extracting relatively pure DNA was assessed based on the total DNA yield, concentration, purity ratios (A₂₆₀/A₂₈₀ and A₂₆₀/A₂₃₀), spectral profile and agarose gel electrophoresis analysis. The quality of the isolated DNA was further analysed for PCR inhibition using a murine specific ATP1A3 qPCR assay and mtDNA/Y-chromosome ratio determination assay. The suitability of the extracted DNA for downstream applications such as end-point SNP genotyping, was tested using PCR-RFLP analysis of the AGTR1-1166A>C variant, a mirSNP having pharmacogenetic relevance in cardiovascular diseases. Compared to the traditional phenol–chloroform/proteinase-K method, our results indicated the Rapid-Method to be a more suitable protocol for genomic DNA extraction from human whole blood in terms of DNA quantity, quality, safety, processing time and cost. The Rapid-Method, which is based on a simple salting-out procedure, is not only safe and cost-effective, but also has the added advantage of being scaled up to process variable sample volumes, thus enabling it to be applied in large-scale epidemiological studies.     

Improving PCR detection of prey in molecular diet studies: importance of group‐specific primer set selection and extraction protocol performances

While the morphological identification of prey remains in predators' faeces is the most commonly used method to study trophic interactions, many studies indicate that this method does not detect all consumed prey. Polymerase chain reaction–based methods are increasingly used to detect prey DNA in the predator food bolus and have proven efficient, delivering highly accurate results. When studying complex diet samples, the extraction of total DNA is a critical step, as polymerase chain reaction (PCR) inhibitors may be co‐extracted. Another critical step involves a careful selection of suitable group‐specific primer sets that should only amplify DNA from the targeted prey taxon. In this study, the food boluses of five Rattus rattus and seven Rattus exulans were analysed using both morphological and molecular methods. We tested a panel of 31 PCR primer pairs targeting bird, invertebrate and plant sequences; four of them were selected to be used as group‐specific primer pairs in PCR protocols. The performances of four DNA extraction protocols (QIAamp^® DNA stool mini kit, DNeasy^® mericon food kit and two of cetyltrimethylammonium bromide‐based methods) were compared using four variables: DNA concentration, A₂₆₀/A₂₈₀ absorbance ratio, food compartment analysed (stomach or faecal contents) and total number of prey‐specific PCR amplification per sample. Our results clearly indicate that the A₂₆₀/A₂₈₀ absorbance ratio, which varies between extraction protocols, is positively correlated to the number of PCR amplifications of each prey taxon. We recommend using the DNeasy^® mericon food kit (QIAGEN), which yielded results very similar to those achieved with the morphological approach.     

A rapid and simple method for DNA extraction from yeasts and fungi isolated from Agave fourcroydes

A simple and easy protocol for extracting high-quality DNA from different yeast and filamentous fungal species is described. This method involves two important steps: first, the disruption of cell walls by mechanical means and freezing; and second, the extraction, isolation, and precipitation of genomic DNA. The absorbance ratios (A₂₆₀/A₂₈₀) obtained ranged from 1.6 to 2.0. The main objective of this procedure is to extract pure DNA from yeast and filamentous fungi, including those with high contents of proteins, polysaccharides, and other complex compounds in their cell walls. The yield and quality of the DNAs obtained were suitable for micro/minisatellite primer-polymerase chain reaction (MSP-PCR) fingerprinting as well as for the sequence of the D1/D2 domain of the 26S rDNA.     

A simple method for DNA extraction from sporophyte in the brown alga <Emphasis Type="Italic">Laminaria japonica</Emphasis>

A simple method was developed for extracting DNA from brown algae Laminaria japonica, which possess large amounts of acidic polysaccharides. Firstly, the sporophyte were washed by eliminating polysaccaride buffer to remove the polysaccharides and then ground in liquid nitrogen. Secondly, the powders were treated with lysing buffer. Thirdly, KAc was used to eliminate the remaining acidic polysaccharides. The extracted DNA was purified using a chloroform-isoamyl alcohol (24:1 v/v), and precipitated in cold isopropanol. The yield was from 18.7 to 37.5 μg g⁻¹ (wet weight) and the purity of total DNA was determined spectrophotometrically as the ratio of A₂₆₀/A₂₈₀, which was about 1.7–1.9. The extracted DNA was of high quality and suitable for molecular analyses, such as PCR, restriction enzyme digestion. This method is a reproducible, simple, and rapid technique for routine DNA extraction from sporophyte in Laminaria japonica. Furthermore, the low cost of this method makes it attractive for large-scale studies.     

Co-isolation of high-quality DNA and RNA from coenocytic green algae

A protocol is presented for the simultaneous isolation of DNA and RNA from giant-celled green algae. The overall quality of the DNA was examined by the A²⁶⁰/A²⁸⁰ ratio, agarose gel electrophoresis, and restriction enzyme analysis. Denaturing gel electrophoresis and cDNA cloning were used to investigate the quality of the RNA. These assays indicated that both the DNA and RNA isolated by this procedure are of high quality, suitable for further molecular analyses. Since many of these algae are slow growing and therefore only a few grams may be available, the isolation of DNA and RNA from the same plant material has obvious advantages.Abbreviations: Etbr, ethidium bromide.     

Rapid,High Quality DNA Isolation from Cypress (Cupressus sempervirens L.) Needles and Optimization of the RAPD Marker Technique

A protocol for extracting high quality DNA from cypress (Cupressus sempervirens L.), a gymnosperm of economic and ecological importance to the Mediterranean, is presented using the commercially supplied DNeasy^TM Plant Mini Kit (QIAGEN GmbH, Germany). Additional steps were introduced in the QIAGEN protocol to significantly enhance DNA quantity and quality. For one sample, the procedure can be completed in less than one hour, and more than 10 samples can be processed in a day. DNA yield and purity were monitored by gel electrophoresis and by determining absorbance at UV (A₂₆₀/A₂₈₀ and A₂₆₀/A₂₃₀). Both ratios were between 1.7 and 2.0, indicating that the presence of contaminating metabolites was minimal. The average DNA yield obtained from 100 mg starting material was around 22 g, which compares very favorably with numbers indicated by the manufacturer. Additionally, restriction and PCR analyses of the extracted DNA showed its compatibility with downstream applications. Using this DNA, the parameters for the randomly amplified polymorphic DNA (RAPD) protocol were optimized based on the use of (1) an AmpliTaq^® DNA Polymerase, Stoffel fragment (Perkin-Elmer), and (2) a high initial denaturation temperature (97.5 °C). Reproducible amplification products were achieved in all PCR reactions. Seven to eight bands per primer were obtained with most individuals. This represents a number at the high end of published results with other plant species.     

Evaluation of commercial kits for extraction of DNA and RNA from Clostridium difficile

Commercial nucleic acid extraction kits are a cost effective, efficient and convenient way to isolate DNA and RNA from bacteria. Despite the increasing importance of the gastrointestinal pathogen, Clostridium difficile, and the increased use of nucleic acids in its identification, characterization, and investigation of virulence factors, no standardized or recommended methods for nucleic acid isolation exist. Here, we sought to evaluate 4 commercial DNA extraction kits and 3 commercial RNA extraction kits assessing cost, labor intensity, purity, quantity and quality of nucleic acid preparations. The DNA extraction kits produced a range of concentrations (20.9–546 ng/ml) and A_260/280 ratios (1.92–2.11). All kits were suitable for DNA extraction with the exception of the Roche MagNA pure LC DNA isolation kit III which produced DNA of high yield but with substantial shearing, but that did not affect downstream PCR amplifications. For RNA extraction, the Qiagen RNeasy mini kit stood out producing preparations of consistently higher concentrations and higher RNA integrity numbers (RIN). The Roche MagNA pure LC RNA isolation kit produced preparations that could not be properly assigned RINs due to a failure to remove small RNAs which were interpreted as degradation. Good DNA and RNA yield are critical but methods are often overlooked. This study highlights the potential for critical variation between established commercial systems and the need for assessment of any extraction methods that are used.     

Improved RNA isolation from Laminaria japonica Aresch (Laminariaceae, Phaeophyta)

RNA isolation is difficult in some plants and algae because phenolics, polysaccharides, or other compounds can bind or co-precipitate with RNA, and because the success of RNA isolation can be strain-specific and species-specific. To create an improved RNA isolation protocol for Laminaria japonica Aresch (Laminariaceae, Phaeophyta), four methods for extracting RNA were tested. A cetyltrimethylammonium bromide (CTAB)-based RNA extraction protocol was developed that clearly showed 28S and 18S ribosomal RNA bands and produced RNA with high yield (68 μg g⁻¹ fresh weight) and high quality (A _260/280 ratio 1.96 ± 0.05). The isolated RNA was intact, and RT-PCR analysis confirmed that further molecular application is feasible.     

Rapid and economic DNA extraction from a single salmon egg for real-time PCR amplification

Salmon eggs are common in Japanese sushi and other seafood products; however, certain fish eggs are used as counterfeit salmon eggs which are found in foods and processed products. This study develops a simple, rapid, and cost-effective method for DNA extraction, filtration (FT) and dilution (DL) protocols from a single salmon egg with good DNA quality for real-time PCR amplification. The DNA amount, DNA quality, and real-time PCR performance for different dilutions and different lengths of PCR amplicons were evaluated and compared with the common Qiagen tissue kit (QTK) and Chelex-100-based (CX) protocols. The extracted DNA from a single salmon egg using the FT or DL protocol can be applied in phylogenic research, food authentication and post-marketing monitoring of genetically modified (GM) food products.     

Rapid and Economic DNA Extraction from a Single Salmon Egg for Real-Time PCR Amplification

Salmon eggs are common in Japanese sushi and other seafood products; however, certain fish eggs are used as counterfeit salmon eggs which are found in foods and processed products. This study develops a simple, rapid, and cost-effective method for DNA extraction, filtration (FT) and dilution (DL) protocols from a single salmon egg with good DNA quality for real-time PCR amplification. The DNA amount, DNA quality, and real-time PCR performance for different dilutions and different lengths of PCR amplicons were evaluated and compared with the common Qiagen tissue kit (QTK) and Chelex-100-based (CX) protocols. The extracted DNA from a single salmon egg using the FT or DL protocol can be applied in phylogenic research, food authentication and post-marketing monitoring of genetically modified (GM) food products.     

Rapid and efficient extraction of genomic DNA from differentphytopathogenic fungi using DNAzol reagent

A modified procedure using the commercial DNAzol reagent was successfully applied to extract genomic DNA from 25 fungal species. The DNA yield varied from 306 to 1,927 g g^-1 dry mycelia and the A₂₆₀/A₂₈₀ ratio from 1.59 to 1.93. Compared with the method of J.L. Cenis (Nucleic Acids Res. 1992, 20: 2380) this procedure generated a higher DNA yield from 17 species and a higher A₂₆₀/A₂₈₀ ratio from 23 species. But for four species, Cenis (1992) method was more suitable. No inhibitor of polymerase chain reaction was evident for the DNA extracted by the modified procedure, whereas some inhibitors remained in DNA of eight species extracted by the previous method.Revisions requested 8 September 2004; Revisions received 1 November 2004     

An improved method to extract DNA from mango Mangifera indica

High quality genomic DNA is the first step in the development of DNA-based markers for fingerprinting and genetic diversity of crops, including mango (Mangifera indica L.), a woody perennial. Poor quality genomic DNA hinders the successful application of analytical DNA-based tools. Standard protocols for DNA extraction are not suitable for mango since the extracted genomic DNA often contains secondary metabolites that interfere with analytical applications. In this study, we employed an additional step to remove polysaccharides, polyphenols and secondary metabolites from genomic DNA extracted from young or mature leaf tissue; then a modified traditional cetyl trimethyl ammonium bromide (CTAB) method was applied. The use of 0.4 M glucose improved DNA quality and avoided contamination and browning by polyphenolics, relative to the traditional CTAB method. This is an easy and efficient method for genomic DNA extraction from both young and mature leaves of mango. The isolated DNA was free of polysaccharides, polyphenols, RNA and other major contaminants, as judged by its clear colour, its viscosity, A²⁶⁰/A²⁸⁰ ratio and suitability for PCR-based reactions. This modified protocol was also used to extract high quality genomic DNA from other woody perennials, including walnut, guava, lychee, pear, grape and sugarcane.     

Rapid High Quality RNA Preparation from Pine Seedlings

Conventional RNA extraction methods have been shown to produce poor quality RNA when applied to pine and other gymnosperms. We present a protocol for extracting highly pure RNA from pine. Modifications to conventional procedures include: 1) the use of seedlings, 2) the use of phenol and PVP to rapidly remove DNA, proteins and pigments, and 3) the use of salt precipitation to remove other contaminating compounds. The procedure can be completed in less than eight hours. Yield and purity were monitored by denaturing gel electrophoresis and by UV absorbance (A₂₆₀ /A₂₈₀ and A₂₆₀/A₂₃₀). These ratios were over 2, indicating an absence of contaminating metabolites. Additionally, a new absorbance ratio (A₂₆₀/A₂₁₀) was introduced to monitor the RNA purity in each step (it indicates the ratio of covalent links in the solution belonging to RNA). The yield was around 300 µg total RNA per gram of tissue of Pinus sylvestris and over 400 µg of total RNA per gram of P. pinaster tissue, which is a high recovery (more than 63%) for gymnosperms. The RNA was of sufficient quality for use in a RT-PCR reaction that amplified 1 kb of the pine GS gene. This protocol has been applied with success to other woody plants like Populus species.Abbreviations: DEPC, diethyl pyrocarbonate; AMV, avian myeloblastosis virus; FW, fresh weight.     

Isolation of genomic DNA suitable for community analysis from mature trees adapted to arid environment

Isolation of intact and pure genomic DNA (gDNA) is essential for many molecular biology applications. It is difficult to isolate pure DNA from mature trees of hot and dry desert regions because of the accumulation of high level of polysaccharides, phenolic compounds, tannins etc. We hereby report the standardized protocol for the isolation and purification of gDNA from seven ecologically and medically important tree species of Combretaceae viz. Anogeissus (Anogeissus sericea var. nummularia, Anogeissus pendula, and Anogeissus latifolia) and Terminalia (Terminalia arjuna, Terminalia bellirica, Terminalia catappa and Terminalia chebula). This method involves (i) washing the sample twice with Triton buffer (2%) then (ii) isolation of gDNA by modified-CTAB (cetyl trimethyl ammonium bromide) method employing a high concentration (4%) of PVP (Polyvinylpyrrolidone) and 50 mM ascorbic acid, and (iii) purification of this CTAB-isolated gDNA by spin-column. gDNA isolated by modified CTAB or spin-column alone were not found suitable for PCR amplification. The Triton washing step is also critical. The quality of DNA was determined by the A₂₆₀/A₂₈₀ absorbance ratio. gDNA was also observed for its intactness by running on 0.8% agarose gel. The suitability of extracted DNA for PCR was tested by amplification with RAPD primers, which was successful. Further, rbcLa (barcoding gene) was amplified and sequenced to check the quality of extracted gDNA for its downstream applications.