Electrospray ionisation-cleavable tandem nucleic acid mass tag–peptide nucleic acid conjugates: synthesis and applications to quantitative genomic analysis using electrospray ionisation-MS/MS

The synthesis and characterization of isotopomer tandem nucleic acid mass tag–peptide nucleic acid (TNT–PNA) conjugates is described along with their use as electrospray ionisation-cleavable (ESI-Cleavable) hybridization probes for the detection and quantification of target DNA sequences by electrospray ionisation tandem mass spectrometry (ESI-MS/MS). ESI-cleavable peptide TNT isotopomers were introduced into PNA oligonucleotide sequences in a total synthesis approach. These conjugates were evaluated as hybridization probes for the detection and quantification of immobilized synthetic target DNAs using ESI-MS/MS. In these experiments, the PNA portion of the conjugate acts as a hybridization probe, whereas the peptide TNT is released in a collision-based process during the ionization of the probe conjugate in the electrospray ion source. The cleaved TNT acts as a uniquely resolvable marker to identify and quantify a unique target DNA sequence. The method should be applicable to a wide variety of assays requiring highly multiplexed, quantitative DNA/RNA analysis, including gene expression monitoring, genetic profiling and the detection of pathogens.     

Light-up probes: thiazole orange-conjugated peptide nucleic acid for detection of target nucleic acid in homogeneous solution

We have constructed light-up probes for nucleic acid detection. The light-up probe is a peptide nucleic acid (PNA) oligonucleotide to which the asymmetric cyanine dye thiazole orange (TO) is tethered. It combines the excellent hybridization properties of PNA and the large fluorescence enhancement of TO upon binding to DNA. When the PNA hybridizes to target DNA, the dye binds and becomes fluorescent. Free probes have low fluorescence, which may increase almost 50-fold upon hybridization to complementary nucleic acid. This makes the light-up probes particularly suitable for homogeneous hybridization assays, where separation of the bound and free probe is not necessary. We find that the fluorescence enhancement upon hybridization varies among different probes, which is mainly due to variations in free probe fluorescence. For eight probes studied the fluorescence quantum yield at 25 degrees C in the unbound state ranged from 0.0015 to 0.08 and seemed to depend mainly on the PNA sequence. The binding of the light-up probes to target DNA is highly sequence specific and a single mismatch in a 10-mer target sequence was readily identified.     

Photocleavable peptide-DNA conjugates: synthesis and applications to DNA analysis using MALDI-MS.

The synthesis and characterization of photocleavable peptide-DNA conjugates is described along with their use as photocleavable mass marker (PCMM) hybridization probes for the detection of target DNA sequences by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. Three photocleavable peptide-DNA conjugates were synthesized, purified, and characterized using HPLC and denaturing gel electrophoresis, as well as IR-MALDI and UV-MALDI. The hybridization properties of the conjugates were also studied by monitoring their thermal denaturation with absorption spectroscopy. No significant difference in the melting temperature ( T (m)) of the duplexes was observed between the unmodified duplex and the duplex in which one strand was modified with the photocleavable peptide moiety. These conjugates were evaluated as hybridization probes for the detection of immobilized synthetic target DNAs using MALDI-MS. In these experiments, the DNA portion of the conjugate acts as a hybridization probe, whereas the peptide is photoreleased during the ionization/desorption step of UV-MALDI and can serve as a marker (mass tag) to identify a unique target DNA sequence. The method should be applicable to a wide variety of assays requiring highly multiplexed DNA/RNA analysis, including gene expression monitoring, genetic profiling and the detection of pathogens.     

肽核酸(peptide nucleic acid,PNA)阵列

肽核酸(PNA)以N—(2—氨基乙基)甘氨酸替代DNA分子中的磷酸戊糖骨架。它能特异性地识别与DNA、RNA所形成的杂交体。PNA—DNA、PNA—RNA的热稳定性要比相应的DNA—DNA、DNA—RNA高,而且PNA识别单碱基的能力强于DNA和RNA,使之在微阵列,尤其是SNP检测领域有着广泛的应用前景。本文简述了PNA阵列从探针设计、阵列合成、杂交和检测的全过程。     

Hybridization assay of hepatitis B virus by QCM peptide nucleic acid biosensor

Although the analyses of HBV genomic DNA have traditionally been performed with commercial techniques, the high cost and long time consumed have hindered their applications in routinely diagnosis and prognosis of infection. We construct peptide nucleic acid (PNA) piezoelectric biosensor for real-time monitoring of hybridization of hepatitis B virus (HBV) genomic DNA. The PNA probe can combine to target DNA sequences more effectively and specifically than a DNA probe. The PNA probe was designed and immobilized on the surface of the biosensor to substitute the conventional DNA probe for direct detection of HBV genomic DNA without previous amplification by PCR. The hybridization assay was completed in 50 min. The detection limit was 8.6 pg/L and the clinical specificity was 94.44% compared with real time-PCR (RT-PCR). The PNA probe was able to distinguish sequences that differ only in one base. Detection sensitivity can be improved and detection time can be decreased by adding RecA protein-coated complementary ssDNA which complement to HBV gene regions. The QCM system we designed has the advantages of being rapid, label-free and highly sensitive and can be a useful supplement to commercial assay methods in clinical chemistry.     

Affinity capture and recovery of DNA at femtomolar concentrations with peptide nucleic acid probes

The efficacy of PNA vs DNA oligomers for the recovery of femtomolar concentrations of 16S rDNA targets was determined with solution- and mixed-phase hybridization formats and limiting dilution quantitative PCR. Several results contradict existing perceptions of expected PNA behavior deduced from hybridization studies with oligonucleotide targets at high concentration. For example, DNA probes in the solution hybridization format performed as well as or better than PNA probes under high- or low-salt conditions, regardless of hybridization time or target size. In the mixed-phase hybridization format, however, PNA probes showed certain advantages, with more rapid and efficient binding/recovery of target nucleic acids regardless of target size. Recovery of target DNA with PNA probes was always more efficient in low-salt (20 mM in Na(+)) than high-salt (400 mM in Na(+-)) phosphate buffer. Recovery of target DNA by PNA probes was enhanced in the presence of excess, nontarget DNA, and differences in PNA efficacy under low- or high-salt conditions vanquished. In contrast, DNA probe performance was unaffected by the presence or absence of exogenous DNA in both solution- and mixed-phase hybridization formats. The absolute recovery and detection limit of the affinity purification method with either DNA or PNA probes was approximately 10(2) input target molecules at zeptamolar concentrations.     

Affinity purification of DNA and RNA from environmental samples with peptide nucleic acid clamps

Bispeptide nucleic acids (bis-PNAs; PNA clamps), PNA oligomers, and DNA oligonucleotides were evaluated as affinity purification reagents for subfemtomolar 16S ribosomal DNA (rDNA) and rRNA targets in soil, sediment, and industrial air filter nucleic acid extracts. Under low-salt hybridization conditions (10 mM NaPO(4), 5 mM disodium EDTA, and 0.025% sodium dodecyl sulfate [SDS]) a PNA clamp recovered significantly more target DNA than either PNA or DNA oligomers. The efficacy of PNA clamps and oligomers was generally enhanced in the presence of excess nontarget DNA and in a low-salt extraction-hybridization buffer. Under high-salt conditions (200 mM NaPO(4), 100 mM disodium EDTA, and 0.5% SDS), however, capture efficiencies with the DNA oligomer were significantly greater than with the PNA clamp and PNA oligomer. Recovery and detection efficiencies for target DNA concentrations of > or =100 pg were generally >20% but depended upon the specific probe, solution background, and salt condition. The DNA probe had a lower absolute detection limit of 100 fg of target (830 zM [1 zM = 10(-21) M]) in high-salt buffer. In the absence of exogenous DNA (e.g., soil background), neither the bis-PNA nor the PNA oligomer achieved the same absolute detection limit even under a more favorable low-salt hybridization condition. In the presence of a soil background, however, both PNA probes provided more sensitive absolute purification and detection (830 zM) than the DNA oligomer. In varied environmental samples, the rank order for capture probe performance in high-salt buffer was DNA > PNA > clamp. Recovery of 16S rRNA from environmental samples mirrored quantitative results for DNA target recovery, with the DNA oligomer generating more positive results than either the bis-PNA or PNA oligomer, but PNA probes provided a greater incidence of detection from environmental samples that also contained a higher concentration of nontarget DNA and RNA. Significant interactions between probe type and environmental sample indicate that the most efficacious capture system depends upon the particular sample type (and background nucleic acid concentration), target (DNA or RNA), and detection objective.     

Transition metal derivatives of peptide nucleic acid (PNA) oligomers-synthesis, characterization, and DNA binding

This work describes the first automated solid-phase synthesis of metal derivatives of peptide nucleic acid (PNA) oligomers and their interaction with DNA and PNA. PNA constitutes a relatively young and very promising class of DNA analogues with excellent DNA and RNA binding properties. However, PNA lacks a suitable handle that would permit its sensitive detection on its own as well as when hybridized with complementary oligonucleotides. Metal complexes, on the other hand, offer high potential as markers for biomolecules. In this paper, we describe the synthesis of PNA heptamers (tggatcg-gly, where gly is a C-terminal glycine carboxylic acid amide) with two covalently attached metal complexes at the PNA N-terminus, namely a ferrocene carboxylic acid derivative and a tris(bipyridine)ruthenium(II) derivative. We show how all synthesis steps may be carried out with high yield on a DNA synthesizer, including attachment of the metal complexes. The conjugates were characterized by HPLC (>90% purity) and ESI-MS. Binding studies of the purified Ru-PNA heptamer to complementary DNA and PNA and comparison to the isosequential metal-free acetyl PNA heptamer proves that the attached metal complex has an influence on the stability (UV-T(m)) and structure (CD spectroscopy) of the conjugates, possibly by disruption of the nearby A:T base pair.     

Use of bioluminescence in nucleic acid hybridization reactions

Luminescence reactions can be used to detect specific nucleic acid sequences hybridized with a nucleic probe. Different labels such as cytidine sulphone, fluorescein, and biotin can be incorporated into DNA or oligonucleotide molecules and detected by antibody or avidin conjugates coupled to glucose-6P dehydrogenase. On supports such as nitrocellulose filters, sensitivity is not greatly increased using luminescence, but detection is rapid and easy to perform using polaroid film. Moreover, hybridization can be performed with different labelled probes on the same sample. In solution, luminescence can be used to monitor sandwich reactions. The method is less sensitive than detection on filters but can easily be automated. The performance of these assays can be increased considerably by enzymatic amplification of the target catalysed by a thermostable polymerase.     

Preparation and evaluation of a peptide nucleic acid gene chip system associated with surface plasmon resonance

The aim of this study was to construct a gene chip system based on a surface plasmon resonance technique, where peptide nucleic acid (PNA) oligomers are used as probes. Since the self-assembled monolayer (SAM) technology offers good control at the molecular level, we prepared 2D surface chemistry via SAM for probe attachments. PNA, which was designed according to the bioinformatics, was immobilized on the SAM-modified chip, and subsequently, relevant parameters of the experiment were ensured and optimized. Our results suggest that the ion strength and pH value of the buffer solution do not play significant roles in PNA or its complementary strand hybridization. The PNA probe binds to its complementary nucleic acid strand with a higher sensitivity and specificity compared to those of a traditional DNA probe. The PNA probe combined with surface plasmon resonance (SPR) technology has the benefits of being a label-free and in-real time monitor, as well as having improved hybridization and stability efficiency, which highlight the PNA gene chip detection system as a promising biosensor for clinical applications.     

Applications of peptide nucleic acids

Several exciting new developments in the applications of the DNA mimic peptide nucleic acid (PNA) have been published recently. A possible breakthrough may have come in efforts to develop PNA into gene therapeutic drugs. In eukaryotic systems, antisense activity of PNAs (as peptide conjugates) has been reported in nerve cells and even in rats upon injection into the brain, and antisense activity has also been demonstrated in Escherichia coli. PNA hybridization technology has developed rapidly within in situ hybridization, and exciting new methods based on MALDI-TOF detection have also been presented.     

The application of peptide nucleic acid probes for rapid detection and enumeration of eubacteria, Staphylococcus aureus and Pseudomonas aeruginosa in recreational beaches of S. Florida

A novel chemiluminescent in situ hybridization technique using peptide nucleic acids (PNA) was adapted for the detection of bacteria in beach sand and recreational waters in South Florida. The simultaneous detection and enumeration of eubacteria and the novel indicators, Staphylococcus aureus and Pseudomonas aeruginosa, was achieved within 6-8 h of processing. Following 5 h of incubation on TSA, soybean peroxidase-labeled peptide nucleic acid probes (Boston Probes, Boston, MA) targeting species-specific 16S rRNA sequences of P. aeruginosa and S. aureus were used to hybridize microcolonies of the target species in-situ. In addition, a universal probe for 16S rRNA sequences was used to target the eubacteria. Probes were detected after a light generating reaction with a chemiluminescent substrate and their presence recorded on Polaroid film. The probes showed limited cross-reactivity with mixed indigenous bacteria extracted from seawater and sand by shaking with phosphate-buffered saline (PBS). Specificity and cross-reactivity was tested on the reference bacterial genera Pseudomonas, Staphylococcus, Vibrio, Shigella, Salmonella, Acinetobacter, Enterobacter, Escherichia and Citrobacter. These tests confirmed that the probes were specific for the microorganisms of interest and were unaffected by high salt levels. The results of the PNA chemiluminescent in situ hybridization were compared with traditional plate count methods (PCM) for total 'freshwater' eubacteria, S. aureus and P. aeruginosa. Counts of eubacteria and S. aureus were comparable with numbers obtained from traditional plate counts but levels of P. aeruginosa were higher with PNA than with PCM. It is possible that PNA is more sensitive than PCM because it can detect microcolonies on the agar surface that never fully develop with the plate count method. We conclude that the in situ hybridization technique used here represents an important potential tool for the rapid monitoring of novel indicator organisms in beaches and recreational waters.     

Relative quantification of 40 nucleic acid sequences by multiplex ligation-dependent probe amplification

We describe a new method for relative quantification of 40 different DNA sequences in an easy to perform reaction requiring only 20 ng of human DNA. Applications shown of this multiplex ligation-dependent probe amplification (MLPA) technique include the detection of exon deletions and duplications in the human BRCA1, MSH2 and MLH1 genes, detection of trisomies such as Down’s syndrome, characterisation of chromosomal aberrations in cell lines and tumour samples and SNP/mutation detection. Relative quantification of mRNAs by MLPA will be described elsewhere. In MLPA, not sample nucleic acids but probes added to the samples are amplified and quantified. Amplification of probes by PCR depends on the presence of probe target sequences in the sample. Each probe consists of two oligonucleotides, one synthetic and one M13 derived, that hybridise to adjacent sites of the target sequence. Such hybridised probe oligonucleotides are ligated, permitting subsequent amplification. All ligated probes have identical end sequences, permitting simultaneous PCR amplification using only one primer pair. Each probe gives rise to an amplification product of unique size between 130 and 480 bp. Probe target sequences are small (50–70 nt). The prerequisite of a ligation reaction provides the opportunity to discriminate single nucleotide differences.     

Enhanced nucleic acid capture and flow cytometry detection with peptide nucleic acid probes and tunable-surface microparticles

New methods for automated, direct nucleic acid purification and detection are required for the next generation of unattended environmental monitoring devices. In this study we investigated whether tunable-surface bead chemistry and peptide nucleic acids (PNA) could enhance the recovery and detection of intact rRNA in both test tube and automated suspension array hybridization formats. Intact rRNA was easily captured and detected on PNA-coated Lumavidin beads from 0.1 ng total RNA with a 15-min hybridization in pH 7 buffer, representing 1.7 x 10(3) cell equivalents of total RNA. DNA-conjugated beads in pH 5 hybridization buffer required an overnight hybridization to achieve a detectable signal at 0.1 ng target RNA. Standard DNA hybridization conditions (pH 7) were one order of magnitude less sensitive than the tunable-surface (pH 5) condition. The PNA-conjugated particles were 100x more sensitive than the tunable-surface DNA particles in the automated format, with a detection limit of 0.1 ng total RNA. The detection limits for total RNA on PNA-conjugated microparticles is immediately conducive to the detection and characterization of microorganisms in low-biomass environments or to the identification of rare sequences in a complex sample mixture, without using PCR.     

Peptide nucleic acids: deoxyribonucleic acid mimics with a peptide backbone

This tutorial briefly describes a new class of synthetic biopolymer, which is referred to as peptide nucleic acid (PNA). In PNA, individual nucleobases are linked to an achiral neutral peptide backbone. PNA exhibits the hybridization characteristic (e.g., Watson—Crick duplex formation) of DNA. The achiral peptide backbone provides similar interbase distances as natural DNA, and adequate flexibility to permit base pair interactions with complementary RNA or DNA strands. Several potential applications of PNA oligomers in biotechnology are suggested. These include the use of PNAs as a probe for specific recognition of a DNA or RNA sequence selective, purification of nucleic acids via designed high affinity binding to PNA, screening for DNA mutations, and as possible therapeutic agents.     

Peptide nucleic acid (PNA) facilitates multistranded hybrid formation between linear double-stranded DNA targets and RecA protein-coated complementary single-stranded DNA probes

RecA protein-coated single-stranded DNA probes, known as RecA nucleoprotein filaments, bind specifically to homologous DNA sequences within double-stranded DNA targets, forming multistranded probe-target DNA hybrids. This DNA hybridization reaction can be used for sequence-specific gene capture, gene modification, and gene regulation. Thus, factors that enhance the efficiency of the hybridization reaction are of significant practical importance. We show here that the hybridization of a peptide nucleic acid (PNA) within or adjacent to the probe-target homology region significantly enhances the yield of hybrid DNA formed in the reaction between linear double-stranded DNA targets and RecA protein-coated complementary single-stranded (css)DNA probes. The possible mechanisms and the advantages of using RecA nucleoprotein filaments in combination with PNA for genomic DNA cloning and mutagenesis are presented.     

Fast quantification of nucleic acid hybrids by affinity-based hybrid collection.

A hybridization technique for the quantification of nucleic acids is described. In the method a probe pair is allowed to form hybrids with the target nucleic acid in solution. One of the probes has been modified with an affinity label, by which the formed hybrids can be isolated after the reaction. Streptavidin-agarose was used to capture hybrids containing biotinylated DNA. The hybrids were measured using radioiodine as label on the second probe. The rate of the hybridization reaction in solution is fast, allowing the whole procedure to be carried out in 3 h. The method is quantitative with a detection limit of 4 X 10(5) molecules (0.67 attomoles) target DNA. The test is insensitive to impurities in biological samples, which are analyzed without purification of the target DNA. Non-isotopic measurement of the hybrids can also be applied. In this case the hybrids are bound to microtitration wells and detected spectrophotometrically by peroxidase-catalyzed colour development.     

Nonradioactive nucleic acid detection by enhanced chemiluminescence using probes directly labeled with horseradish peroxidase

The use of nucleic acid probes directly labeled with horseradish peroxidase for detection of single copy sequences on Southern blots of human genomic DNA by enhanced chemiluminescence is described. Of the target sequences, 6 x 10(5) molecules (1 amol) have been detected on blue sensitive film using exposures of up to 60 min and probes of 0.3-5.1 kb. The chemiluminescent signal quantified using a cooled charge coupled device (CCD) camera is proportional to probe length for DNA probes in the range 50-3571 bases. The enzyme has no significant effect on the stability of a DNA/DNA hybrid formed with a 3571-base probe and target as determined by increasing the stringency of posthybridization washes by decreasing the concentration of a monovalent cation (NaCl) and by a Tm analysis. The kinetics of DNA hybridization have been analyzed by a cooled CCD camera to provide quantitative data. Ten nanograms per milliliter of probe may be used for an overnight hybridization. Southern blots can be reprobed using a DNA probe for the same or a different sequence without the necessity of stripping off the previously bound probe.     

Membrane-based hybridization capture of intracellular peptide nucleic acid

Peptide nucleic acid (PNA) is a chimeric oligonucleotide with nucleotide-derived bases and a peptide backbone. Compared with natural nucleotides, PNA has several advantages, including improved stability and high sequence discrimination during duplex formation. Despite its potential for therapeutic application, analysis technologies have not been generalized, mainly due to ambiguous physiochemical properties resembling those of nucleic acids as well as protein. Here we present a PNA detection method: sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) followed by electrotransfer to a Western blotting membrane and then hybridization with a radiolabeled oligonucleotide probe. This method is useful for evaluating the quality of synthetic PNA and determining its intracellular localization.