Time-resolved fluorometry: a sensitive method to quantify DNA-hybrids.

Europium and other lanthanides can be excitated with UV-radiation, whereafter the energy is released as fluorescence, delayed in time up to 1 ms after the excitation. Eu can be used as a sensitive label in biological assays. Here we report on the application of time-resolved fluorometry to detect nucleic acid hybrids. The probe DNA was tagged with a hapten, either a fluorene or a sulfone group. After hybridization the probe DNA was detected by a two-step immunological assay with the second antibody labelled with Eu. The method is quantitative with a detection limit of 0.3 pg of actual target regions of immobilized adenovirus genomic DNA. The label was also used in sandwich hybridization, which allowed analyzing nasopharyngeal mucus for the presence of adenovirus.     

Solution hybridization assay for detecting genetically engineered microorganisms in environmental samples

A solution hybridization method was developed for detecting genetically engineered microorganisms in environmental samples. The detection method involves recovery of DNA from the microbial community of an environmental sample followed by hybridization in solution with a radiolabeled RNA gene probe. After nuclease digestion of non-hybridized probe RNA, the DNA-RNA hybrids formed in the solution hybridization reaction are separated by sephadex or hydroxyapatite column chromatography and detected by liquid scintillation counting. Using solution hybridization-gene probe detection, as few as 100-1000 target cells per gram sediment sample of a 2,4,5-T-degrading genetically engineered microorganisms could be detected.     

Quantification of DNA sequences obtained by polymerase chain reaction using a bioluminescent adsorbent.

We studied various parameters affecting the sensitivity of assays that use nucleic acid hybridization in solution followed by capture of the hybrid on a solid phase. Sensitivity is limited not only by nonspecific binding of the detection components but also by reannealing of the target or probe to itself. To perform sensitive assays, the probe concentration must be low enough to reduce high nonspecific binding. Under these conditions, however, the strand displacement reaction or the reannealing of the target to itself drastically decreases the hybridization yield, particularly when the target and the probes are different sizes. To improve DNA detection, we propose a sandwich method based on hybridization of oligonucleotides with a single-strand DNA obtained by polymerase chain reaction under asymmetric conditions. The assay can be performed in one step using a bioluminescent detection procedure which does not require any separation step. The specificity of the method is sufficient to perform a rapid detection and quantification of papillomavirus in biological samples.     

Nucleic acid hybridization: from research tool to routine diagnostic method

The nucleic acid hybridization reaction is extremely specific and thus a valuable tool for the identification of genes or organism of interest. The increasing use of nucleic acid hybridization in applied fields like diagnostic medicine has led to the development of more convenient hybridization assays than those originally used in basic research. In conventional nucleic acid hybridization methods immobilized nucleic acids are detected on a filter by a radiolabelled probe. Sandwich hybridization is a simple test format for the analysis of unpurified biological material, but has the disadvantage of a slow reaction rate. Solution hybridization methods are fast and easy to perform provided that a method to separate the formed hybrids from the reaction mixture is available. In non-isotopic detection the nucleic acid probe is modified with a chemical group, which is identified with a labelled detector molecule after hybridization. The low sensitivity of detection is the main problem in nucleic acid hybridization methods. Procedures to amplify the detectable signal or the amount of detectable nucleic acid sequences are potential solutions to this problem. The new hybridization methods have successfully been used for some applications, but still need to be combined into well performing tests to be applicable to any desired purpose.     

Nonisotopic detection of RNA in an enzyme immunoassay using a monoclonal antibody against DNA-RNA hybrids

A sensitive nonisotopic solution hybridization assay for detection of RNA is described and characterized using a pSP65 plasmid model system. The assay procedure is based on a hybridization reaction in solution between a biotinylated DNA probe and a target RNA. The biotin-labeled hybrids are captured on a microtiter plate coated with an antibody to biotin. Bound DNA-RNA hybrids are detected by an immunoreaction with an enzyme-labeled monoclonal antibody specifically directed against DNA-RNA heteropolymers and the hybrids are quantitatively measured with the addition of a fluorogenic substrate. Optimal conditions under which to perform the assay were hybridization time, 1000 min; temperature, 75 degrees C; probe concentration, 0.2 microgram/ml; extent of probe biotinylation, 6.7%; buffer stringency, 2x SSC. A bisulfite-modified DNA probe was compared to nick-translated probes synthesized with reporter groups of different lengths (bio-11-dUTP or bio-19-dUTP). All probes could detect 10 pg/ml of target RNA. The presence of nonhomologous DNA or RNA sequences reduced the sensitivity of RNA detection by one half-log to 32 pg/ml (1.6 pg/assay).     

Microwave irradiation-stimulated in situ hybridization procedure with biotinylated DNA probe.

A microwave-stimulated in situ hybridization technique using biotin-labeled DNA probe is described. Both hybridization reaction and the detection of the biotin label (with a alkaline phosphatase or immunofluorescence method) has been performed in the microwave oven. All procedures are completed within one hour. The described method was applied for identification of nucleic acid sequences of human immunodeficiency virus in human cell lines. The resolution and the intensity of the signal are as good as from a standard technique with overnight incubation of the probe. Because of the simplicity and speed of the technique, this procedure can be used in a number of other applications.     

Quantitative detection of messenger RNA by solution hybridization and enzyme immunoassay

A novel nucleic acid detection technique is described for the quantitative measurement of eukaryotic mRNA in biological samples. The procedure involves two steps: a hybridization reaction in solution with a biotinylated cDNA probe, and a conventional enzyme immunoassay that uses a monoclonal antibody for DNA.RNA hybrids to detect the specific mRNA.cDNA complexes. The method has comparable sensitivity to 32P-based methods and yields results that are quantitative and highly reproducible. Furthermore, the test can be performed using unfractionated cytoplasm without the need for extraction with organic solvents. This technique provides a rapid and quantitative method for studying changes in cellular mRNA levels, and it is suitable for testing large numbers of samples.     

Rapid identification of microorganisms by nucleic acid hybridization after labeling the test sample

A novel method for rapidly identifying microorganisms has been developed. This method employs a monoadduct-forming furocoumarin derivative, which can photochemically label nucleic acids. The labeled nucleic acid can, in turn, be hybridized simultaneously to a panel of immobilized probe DNAs arrayed as dots on a solid support such as nitrocellulose. This procedure offers several advantages over more conventional hybridization techniques in that sample nucleic acids can be photolabeled without substantial sample preparation and that identification can be achieved by a single, rapid hybridization reaction.     

Electrochemical biosensor for the detection of cauliflower mosaic virus 35 S gene sequences using lead sulfide nanoparticles as oligonucleotide labels

Lead sulfide (PbS) nanoparticles were synthesized in aqueous solution and used as oligonucleotide labels for electrochemical detection of the 35 S promoter from cauliflower mosaic virus (CaMV) sequence. The PbS nanoparticles were modified with mercaptoacetic acid and could easily be linked with CaMV 35 S oligonucleotide probe. Target DNA sequences were covalently linked on a mercaptoacetic acid self-assembled gold electrode, and DNA hybridization of target DNA with probe DNA was completed on the electrode surface. PbS nanoparticles anchored on the hybrids were dissolved in the solution by oxidation of HNO₃ and detected using a sensitive differential pulse anodic stripping voltammetric method. The detection results can be used to monitor the hybridization reaction. The CaMV 35 S target sequence was satisfactorily detected with the detection limit as 4.38 × 10⁻¹² mol/L (3σ). The established method extends nanoparticle-labeled electrochemical DNA analysis to specific sequences from genetically modified organisms with higher sensitivity and selectivity.     

Single nucleotide polymorphism genotyping using short,fluorescently labeled locked nucleic acid (LNA) probes and fluorescence polarization detection

Locked nucleic acids (LNAs) are synthetic nucleic acid analogs that bind to complementary target molecules (DNA, RNA or LNA) with very high affinity. At the same time, this binding affinity is decreased substantially when the hybrids thus formed contain even a single mismatched base pair. We have exploited these properties of LNA probes to develop a new method for single nucleotide polymorphism genotyping. In this method, very short (hexamer or heptamer) LNA probes are labeled with either rhodamine or hexachlorofluorescein (HEX), and their hybridization to target DNAs is followed by measuring the fluorescence polarization (FP) of the dyes. The formation of perfectly complementary double-stranded hybrids gives rise to significant FP increases, whereas the presence of single mismatches results in very small or no changes of this parameter. Multiplexing of the assay can be achieved by using differentially labeled wild-type and mutant specific probes in the same solution. The method is homogeneous, and because of the use of extremely short LNA probes, the generation of a universal set of genotyping reagents is possible.     

Peptide nucleic acid-assisted topological labeling of duplex dna

Peptide nucleic acids (PNAs) are a family of synthetic polyamide mimics of nucleic acids that offer a variety of applications. Pyrimidine bis-PNAs can be used for rational design of novel interlocked DNA nanostructures, earring labels, representing locked pseudorotaxanes or locked catenanes. These structures are created through DNA ligase-mediated catenation of duplex DNA with a circularized oligonucleotide tag at a designated DNA site. The assembly is performed via formation of the PD-loop consisting of a pair of bis-PNA openers and the probe oligonucleotide. The openers locally expose one of the two strands of duplex DNA for hybridizing the probe, whose termini are complementary to the displaced DNA strand. After hybridization, they are in juxtaposition and can subsequently be linked by DNA ligase. As a result, a true topological link forms at a precise position on the DNA double helix yielding locked, earring-like label. DNA topological labeling can be done both in solution and, for longer templates, within the agarose gel plug. Accordingly, highly localized DNA detection with rolling circle amplification of hybridization signal and effective micromanipulations with DNA duplexes become possible through precise spatial positioning of various ligands on the DNA scaffold.     

The biophysics of DNA hybridization with immobilized oligonucleotide probes.

A mathematical model based on receptor-ligand interactions at a cell surface has been modified and further developed to represent heterogeneous DNA-DNA hybridization on a solid surface. The immobilized DNA molecules with known sequences are called probes, and the DNA molecules in solution with unknown sequences are called targets in this model. Capture of the perfectly complementary target is modeled as a combined reaction-diffusion limited irreversible reaction. In the model, there are two different mechanisms by which targets can hybridize with the complementary probes: direct hybridization from the solution and hybridization by molecules that adsorb nonspecifically and then surface diffuse to the probe. The results indicate that nonspecific adsorption of single-stranded DNA on the surface and subsequent two-dimensional diffusion can significantly enhance the overall reaction rate. Heterogeneous hybridization depends strongly on the rate constants for DNA adsorption/desorption in the non-probe-covered regions of the surface, the two-dimensional (2D) diffusion coefficient, and the size of probes and targets. The model shows that the overall kinetics of DNA hybridization to DNA on a solid support may be an extremely efficient process for physically realistic 2D diffusion coefficients, target concentrations, and surface probe densities. The implication for design and operation of a DNA hybridization surface is that there is an optimal surface probe density when 2D diffusion occurs; values above that optimum do not increase the capture rate. Our model predicts capture rates in agreement with those from recent experimental literature. The results of our analysis predict that several things can be done to improve heterogeneous hybridization: 1) the solution phase target molecules should be about 100 bases or less in size to speed solution-phase and surface diffusion; 2) conditions should be created such that reversible adsorption and two-dimensional diffusion occur in the surface regions between DNA probe molecules; 3) provided that 2) is satisfied, one can achieve results with a sparse probe coverage that are equal to or better than those obtained with a surface totally covered with DNA probes.     

Quantification of polymerase chain reaction products by affinity-based hybrid collection.

We have used oligonucleotides modified with biotin in the 5'-end as primers in the polymerase chain reaction (PCR)-amplification. This results in the synthesis of 5'-biotinylated DNA molecules, which are detected by hybridization to a labelled probe in solution. The formed hybrids are collected on an avidin-matrix by mediation of the biotin residue of the target molecules. The affinity-based hybrid collection method is quantitative and makes it possible to measure the amount of DNA produced in the PCR-amplification. At low concentrations of template the efficiency of the process is close to 100%, making it possible to detect the presence of a few molecules of target DNA in 25 cycles. With high template concentrations the efficiency of the process is low.     

Electric chips for rapid detection and quantification of nucleic acids

A silicon chip-based electric detector coupled to bead-based sandwich hybridization (BBSH) is presented as an approach to perform rapid analysis of specific nucleic acids. A microfluidic platform incorporating paramagnetic beads with immobilized capture probes is used for the bio-recognition steps. The protocol involves simultaneous sandwich hybridization of a single-stranded nucleic acid target with the capture probe on the beads and with a detection probe in the reaction solution, followed by enzyme labeling of the detection probe, enzymatic reaction, and finally, potentiometric measurement of the enzyme product at the chip surface. Anti-DIG-alkaline phosphatase conjugate was used for the enzyme labeling of the DIG-labeled detection probe. p-Aminophenol phosphate (pAPP) was used as a substrate. The enzyme reaction product, p-aminophenol (pAP), is oxidized at the anode of the chip to quinoneimine that is reduced back to pAP at the cathode. The cycling oxidation and reduction of these compounds result in a current producing a characteristic signal that can be related to the concentration of the analyte. The performance of the different steps in the assay was characterized using in vitro synthesized RNA oligonucleotides and then the instrument was used for analysis of 16S rRNA in Escherichia coli extract. The assay time depends on the sensitivity required. Artificial RNA target and 16S rRNA, in amounts ranging from 10(11) to 10(10) molecules, were assayed within 25 min and 4 h, respectively.     

Detection of Plasmodium falciparum DNA in a microtitration plate-based hybridization test

A rapid DNA-test, depending on the affinity based hybrid collection principle, was developed for the detection of Plasmodium falciparum DNA from clinical specimens. In this method, hybridization takes place in solution and the hybrids are collected onto a solid phase for measurement. Two probes are used, one labelled with an affinity tag (biotin) and the other with a detectable label (32P). In the present test a single oligonucleotide complementary to a 21-base pair sequence which is highly repeated in the parasite genome served both as capture and detector probe. The test is a 2-h hybridization performed in streptavidin coated microtitration plate wells, onto which the labelled hybrids simultaneously bind. The sensitivity of the assay with a crude erythrocyte lysate specimen was 1.6 x 10(9) repeat units corresponding to about 160 parasites in one microliter blood. The results allowed quantification of the repeat sequences and thus estimation of the degree of parasitemia in clinical specimens.     

Detection of hybrid formation between peptide nucleic acids and DNA by fluorescence polarization in the presence of polylysine.

A new method for the detection of PNA/DNA hybrids is presented. In this method, short PNA probes (9-13 mer) are labeled with a fluorescent dye and allowed to hybridize to target DNA molecules. A cationic polyamino acid, such as polylysine, is then added to the reaction mixture, whereupon the DNA molecules bind electrostatically to this polycation. The PNA probes, which are uncharged or may carry only a small charge due to the fluorescent dye, do not bind to polylysine unless hybridized to the negatively charged DNA target. The binding of the labeled PNA/DNA hybrid to the high-molecular-weight polymer leads to a significant change in the rotational correlation time of the fluorophore attached to the PNA. This can be conveniently detected by measuring the fluorescence polarization of the latter. The method is completely homogeneous because no separation of free from bound PNA probe is required. The hybridization and dehybridization reactions can be followed in real time. The method has been applied to the typing of single-nucleotide polymorphisms in PCR products.     

Preparation and characterization of spin-labeled oligonucleotides for DNA hybridization.

Sequence-specific spin-labeled oligodeoxynucleotides with conformation-sensitive electron paramagnetic resonance (EPR) signals are synthesized and examined as solution-phase nucleic acid hybridization probes. Either a proxyl or tempo ring linked to the C(5) position of deoxyuridine (dU) by a nonrigid two-atom methylamino tether is incorporated within 15-mers by phosphotriester chemistry yielding stable spin-labeled probes with distinctive EPR specific activity (AEPR) values. The AEPR is greater for a proxyl-labeled than for a tempo-labeled probe and is consistent with EPR data of enzymatically labeled 26-mers [Bobst, A. M., Pauly, G. T., Keyes, R. S., and Bobst, E. V. (1988) FEBS Lett. 228, 33-36], after normalizing for percent labeling. The spectral characteristics of the free probes and the probe/target complexes are similar to those of enzymatically spin-labeled nucleic acids containing a different nonrigid two-atom-tethered spin label [Bobst, A. M., Kao, S.-C., Toppin, R. C., Ireland, J. C., and Thomas, I. E. (1984) J. Mol. Biol. 173, 63-70]. The presence of target DNA is detected in solution by EPR spectroscopy and the assay is based on the characteristic line-shape change associated with hybridization. The EPR spectra of free and bound probe reflect little interference from changes in global dynamics of the probe, and the line-shape change upon complexation results primarily from a change in local base dynamics. The presence or absence of hybridization can be detected in a loop-gap resonator with about 1 pmol of spin-labeled 15-mer within minutes.     

Strategies for optimizing DNA hybridization on surfaces

Specific and predictable hybridization of the polynucleotide sequences to their complementary counterparts plays a fundamental role in the rational design of new nucleic acid nanodevices. Generally, nucleic acid hybridization can be performed using two major strategies, namely hybridization of DNA or RNA targets to surface-tethered oligonucleotide probes (solid-phase hybridization) and hybridization of the target nucleic acids to randomly distributed probes in solution (solution-phase hybridization). Investigations into thermodynamic and kinetic parameters of these two strategies showed that hybridization on surfaces is less favorable than that of the same sequence in solution. Indeed, the efficiency of DNA hybridization on surfaces suffers from three constraints: (1) electrostatic repulsion between DNA strands on the surface, (2) steric hindrance between tethered DNA probes, and (3) nonspecific adsorption of the attached oligonucleotides to the solid surface. During recent years, several strategies have been developed to overcome the problems associated with DNA hybridization on surfaces. Optimizing the probe surface density, application of a linker between the solid surface and the DNA-recognizing sequence, optimizing the pH of DNA hybridization solutions, application of thiol reagents, and incorporation of a polyadenine block into the terminal end of the recognizing sequence are among the most important strategies for enhancing DNA hybridization on surfaces.     

A multiple-staining procedure for the detection of different DNA fragments on a single blot.

We have developed a method that implies the use of a particular type of substrate which can be used in combination with alkaline phosphatase in detecting nucleic acid on filters. The method allows the detection of several different nucleic acid sequences on a single filter. In consecutive steps, the target DNA molecules are hybridized with different digoxigenin-labeled DNA probes. After each hybridization step, digoxigenin is detected with an antibody-alkaline phosphatase conjugate. This enzyme is subsequently visualized by a color reaction using different 2-hydroxy-3-naphthoic acid anilide (naphthol AS) phosphates as substrates in combination with varying diazonium salts. The multiple-staining procedure is based on the fact that the probe DNA-antibody complex can be removed while the color precipitate remains stably bound at its place on the filter. This allows several repeated hybridizations with other digoxigenin-labeled probes followed by antibody detection and color reaction with other naphthol AS phosphate-diazonium salt combinations. Aside from the ability to simultaneously visualize different target DNAs on a single filter, this new method provides several important features that are more powerful than the conventional 5-bromo-4-chloro-3-indolyl phosphate-nitro blue tetrazolium (BCIP-NBT) color reaction for alkaline phosphatase. The colors are more stable and brilliant than BCIP-NBT; their development is faster, the resolution of closely spaced bands is greater, and the background is much lower. The detection limit for alkaline phosphates is as good as with BCIP-NBT (0.1 pg of DNA). One major advantage is the simplicity of removing the colors by ethanol incubation. In this paper, the method is described using the example of Southern blotted DNA fragments.(ABSTRACT TRUNCATED AT 250 WORDS)