Characterization and subcellular localization of the Clostridium thermocellum scaffoldin dockerin binding protein SdbA.

This article reports the characterization of the Clostridium thermocellum SdbA protein thought to anchor the cellulosome to the bacterial cell surface. The NH2-terminal region of SdbA consists of a cohesin domain which specifically binds the dockerin domain of the cellulosomal scaffolding protein CipA. The COOH-terminal region consists of a triplicated segment, termed SLH repeats, which is present in the sequence of many bacterial cell surface polypeptides. The binding parameters of the interaction between the dockerin domain of CipA and the cohesin domain of SdbA were studied by using, as a probe, the chimeric polypeptide CelC-DSCipA, which carries the dockerin domain of CipA fused to endoglucanase CelC. In the presence of Ca2+, CelC-DSCipA bound to SdbA with an affinity constant of 1.26 x 10(7) M(-1). Binding of CelC-DSCipA to SdbA as a function of Ca2+ concentration was sigmoidal, corresponding to a Hill coefficient of 2 and an affinity constant for Ca2+ of 4 x 10(6) M(-2). This suggested the presence of two cooperatively bound Ca2+ ions in the cohesin-dockerin complex. Immunoblotting of C. thermocellum subcellular fractions and electron microscopy of immunocytochemically labeled cells indicated that SdbA is located on the cell surface and is a component of the cellulosome. Together, the data confirm that SdbA could mediate anchoring of the cellulosome to the surface of C. thermocellum cells by interacting with the dockerin domain of CipA.     

A new type of cohesin domain that specifically binds the dockerin domain of the Clostridium thermocellum cellulosome-integrating protein CipA.

The cellulosome-integrating protein CipA, which serves as a scaffolding protein for the cellulolytic complex produced by Clostridium thermocellum, comprises a COOH-terminal duplicated segment termed the dockerin domain. This paper reports the cloning and sequencing of a gene, termed sdbA (for scaffoldin dockerin binding), encoding a protein which specifically binds the dockerin domain of CipA. The sequenced fragment comprises an open reading frame of 1,893 nucleotides encoding a 631-amino-acid polypeptide, termed SdbA, with a calculated molecular mass of 68,577 kDa. SAA comprises an NH2-terminal leader peptide followed by three distinct regions. The NH2-terminal region is similar to the NH2-terminal repeats of C. thermocellum OlpB and ORF2p. The central region is rich in lysine and harbors a motif present in Streptococcus M proteins. The COOH-terminal region consists of a triplicated sequence present in several bacterial cell surface proteins. The NH2-terminal region of SdbA and a fusion protein carrying the first NH2-terminal repeat of OlpB were shown to bind the dockerin domain of CipA. Thus, a new type of cohesin domain, which is present in one, two, and four copies in SdbA, ORF2p, and OlpB, respectively, can be defined. Since OlpB and most likely SdbA and ORF2p are located in the cell envelope, the three proteins probably participate in anchoring CipA (and the cellulosome) to the cell surface.     

Interaction between a type-II dockerin domain and a type-II cohesin domain from Clostridium thermocellum cellulosome

The interaction between the type-II dockerin domain of the scaffoldin protein CipA and the type-II cohesin domain of the outer layer protein SdbA is the fundamental mechanism for anchoring the cellulosome to the cell surface of Clostridium thermocellum. We constructed and purified a dockerin polypeptide and a cohesin polypeptide, and determined affinity constants of the interaction between them by the surface plasmon resonance method. The dissociation constant (K(D)) value was 1.8 x 10(-9) M, which is a little larger than that for the combination of a type-I dockerin and a type-I cohesin.     

Self-assembled amyloid-like oligomeric-cohesin Scaffoldin for augmented protein display on the saccharomyces cerevisiae cell surface

In this study, a molecular self-assembly strategy to develop a novel protein scaffold for amplifying the extent and variety of proteins displayed on the surface of Saccharomyces cerevisiae is presented. The cellulosomal scaffolding protein cohesin and its upstream hydrophilic domain (HD) were genetically fused with the yeast Ure2p N-terminal fibrillogenic domain consisting of residues 1 to 80 (Ure2p(1-80)). The resulting Ure2p(1-80)-HD-cohesin fusion protein was successfully expressed in Escherichia coli to produce self-assembled supramolecular nanofibrils that serve as a novel protein scaffold displaying multiple copies of functional cohesin domains. The amyloid-like property of the nanofibrils was confirmed via thioflavin T staining and atomic force microscopy. These cohesin nanofibrils attached themselves, via a green fluorescent protein (GFP)-dockerin fusion protein, to the cell surface of S. cerevisiae engineered to display a GFP-nanobody. The excess cohesin units on the nanofibrils provide ample sites for binding to dockerin fusion proteins, as exemplified using an mCherry-dockerin fusion protein as well as the Clostridium cellulolyticum CelA endoglucanase. More than a 24-fold increase in mCherry fluorescence and an 8-fold increase in CelA activity were noted when the cohesin nanofibril scaffold-mediated yeast display was used, compared to using yeast display with GFP-cohesin that contains only a single copy of cohesin. Self-assembled supramolecular cohesin nanofibrils created by fusion with the yeast Ure2p fibrillogenic domain provide a versatile protein scaffold that expands the utility of yeast cell surface display.     

Unusual binding properties of the dockerin module of Clostridium thermocellum endoglucanase CelJ (Cel9D-Cel44A)

Cellulosomes are cellulolytic complexes produced by anaerobic bacteria, and are composed of a scaffolding protein and several catalytic components. The complexes are formed by highly specific interactions of one of the reiterated cohesin modules of the scaffolding protein with a dockerin module of the catalytic components. The affinities of a dockerin module of Clostridium thermocellum CelJ (Cel9D-Cel44A) for several cohesin modules from C. thermocellum and Clostridium josui scaffolding proteins were quantitatively measured by surface plasmon resonance analysis. The recombinant CelJ dockerin-containing protein interacted with three recombinant C. josui cohesin proteins as well as recombinant C. thermocellum cohesin proteins beyond the so-called 'species specificity' of the dockerin and cohesin interactions. However, this protein did not recognize a second cohesin module from the C. josui scaffolding protein, suggesting that the catalytic components are not necessarily arranged randomly on a scaffolding protein in native cellulosomes.     

Cohesin-dockerin interactions within and between Clostridium josui and Clostridium thermocellum: binding selectivity between cognate dockerin and cohesin domains and species specificity

The cellulosome components are assembled into the cellulosome complex by the interaction between one of the repeated cohesin domains of a scaffolding protein and the dockerin domain of an enzyme component. We prepared five recombinant cohesin polypeptides of the Clostridium thermocellum scaffolding protein CipA, two dockerin polypeptides of C. thermocellum Xyn11A and Xyn10C, four cohesin polypeptides of Clostridium josui CipA, and two dockerin polypeptides of C. josui Aga27A and Cel8A, and qualitatively and quantitatively examined the cohesin-dockerin interactions within C. thermocellum and C. josui, respectively, and the species specificity of the cohesin-dockerin interactions between these two bacteria. Surface plasmon resonance (SPR) analysis indicated that there was a certain selectivity, with a maximal 34-fold difference in the K(D) values, in the cohesin-dockerin interactions within a combination of C. josui, although this was not detected by qualitative analysis. Affinity blotting analysis suggested that there was at least one exception to the species specificity in the cohesin-dockerin interactions, although species specificity was generally conserved among the cohesin and dockerin polypeptides from C. thermocellum and C. josui, i.e. the dockerin polypeptides of C. thermocellum Xyn11A exceptionally bound to the cohesin polypeptides from C. josui CipA. SPR analysis confirmed this exceptional binding. We discuss the relationship between the species specificity of the cohesin-dockerin binding and the conserved amino acid residues in the dockerin domains.     

Direct conversion of xylan to ethanol by recombinant Saccharomyces cerevisiae strains displaying an engineered minihemicellulosome

Arabinoxylan is a heteropolymeric chain of a β-1,4-linked xylose backbone substituted with arabinose residues, representing a principal component of plant cell walls. Here we developed recombinant Saccharomyces cerevisiae strains as whole-cell biocatalysts capable of combining hemicellulase production, xylan hydrolysis, and hydrolysate fermentation into a single step. These strains displayed a series of uni-, bi-, and trifunctional minihemicellulosomes that consisted of a miniscaffoldin (CipA3/CipA1) and up to three chimeric enzymes. The miniscaffoldin derived from Clostridium thermocellum contained one or three cohesin modules and was tethered to the cell surface through the S. cerevisiae a-agglutinin adhesion receptor. Up to three types of hemicellulases, an endoxylanase (XynII), an arabinofuranosidase (AbfB), and a β-xylosidase (XlnD), each bearing a C-terminal dockerin, were assembled onto the miniscaffoldin by high-affinity cohesin-dockerin interactions. Compared to uni- and bifunctional minihemicellulosomes, the resulting quaternary trifunctional complexes exhibited an enhanced rate of hydrolysis of arabinoxylan. Furthermore, with an integrated d-xylose-utilizing pathway, the recombinant yeast displaying the bifunctional minihemicellulosome CipA3-XynII-XlnD could simultaneously hydrolyze and ferment birchwood xylan to ethanol with a yield of 0.31 g per g of sugar consumed.     

The Clostridium cellulolyticum dockerin displays a dual binding mode for its cohesin partner

The plant cell wall degrading apparatus of anaerobic bacteria includes a large multienzyme complex termed the "cellulosome." The complex assembles through the interaction of enzyme-derived dockerin modules with the multiple cohesin modules of the noncatalytic scaffolding protein. Here we report the crystal structure of the Clostridium cellulolyticum cohesin-dockerin complex in two distinct orientations. The data show that the dockerin displays structural symmetry reflected by the presence of two essentially identical cohesin binding surfaces. In one binding mode, visualized through the A16S/L17T dockerin mutant, the C-terminal helix makes extensive interactions with its cohesin partner. In the other binding mode observed through the A47S/F48T dockerin variant, the dockerin is reoriented by 180 degrees and interacts with the cohesin primarily through the N-terminal helix. Apolar interactions dominate cohesin-dockerin recognition that is centered around a hydrophobic pocket on the surface of the cohesin, formed by Leu-87 and Leu-89, which is occupied, in the two binding modes, by the dockerin residues Phe-19 and Leu-50, respectively. Despite the structural similarity between the C. cellulolyticum and Clostridium thermocellum cohesins and dockerins, there is no cross-specificity between the protein partners from the two organisms. The crystal structure of the C. cellulolyticum complex shows that organism-specific recognition between the protomers is dictated by apolar interactions primarily between only two residues, Leu-17 in the dockerin and the cohesin amino acid Ala-129. The biological significance of the plasticity in dockerin-cohesin recognition, observed here in C. cellulolyticum and reported previously in C. thermocellum, is discussed.     

Sequence of the Clostridium thermocellum mannanase gene man26B and characterization of the translated product

The man26B gene of Clostridium thermocellum strain F1 was found in pKS305, which had been selected as a recombinant plasmid conferring endoglucanase activity on Escherichia coli. The open reading frame of man26B consists of 1,773 nucleotides encoding a protein of 591 amino acids with a predicted molecular weight of 67,047. Man26B is a modular enzyme composed of an N-terminal signal peptide and three domains in the following order: a mannan-binding domain, a family 26 mannanase domain, and a dockerin domain responsible for cellulosome assembly. We found that this gene was a homologue of the man26A gene of C. thermocellum strain YS but that there were insertion or deletion mutations that caused a frame-shift mutation affecting a stretch of 26 amino acids in the catalytic domain. Man26B devoid of the dockerin domain was constructed and purified from a recombinant E. coli, and its enzyme properties were examined. Immunological analysis indicated that Man26B was a catalytic component of the C. thermocellum F1 cellulosome.     

Characterization of the cellulolytic complex (cellulosome) from Ruminococcus albus

The cellulolytic complex was isolated from the culture supernatant of Ruminococcus albus strain F-40 grown on cellulose by a Sephacryl S-300HR column chromatography. The molecular mass of the cellulolytic complex was found to be larger than 1.5 x 10(6) Da. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis indicated that the cellulolytic complex contained at least 15 proteins with molecular weights from 40kDa to 250 kDa. Among them, 11 proteins showed endoglucanase and/or xylanase activities on the zymograms. Immunological analysis using an antiserum raised against the dockerin domain of endoglucanase VII of R. albus (DocVII) suggested that at least 7 proteins in the cellulolytic complex contained a dockerin domain immunoreactive with the anti-Doc-VII antiserum. Furthermore, DocVII was shown to specifically interact with a 40-kDa protein of the cellulolytic complex by Far-Western blot analysis. These results strongly suggest that the cellulolytic complex produced by R. albus resembles the cellulosome specified for the cellulolytic complex of several clostridia such as Clostridium thermocellum and respective components are assembled into the cellulosome by the mechanism common in all of the cellulolytic clostridia, i.e., the cellulosome is formed by the interaction between a dockerin domain of catalytic components and a cohesin domain of a scaffolding protein.     

Characterization of a dockerin-based affinity tag: application for purification of a broad variety of target proteins

Cellulose, a major component of plant matter, is degraded by a cell surface multiprotein complex called the cellulosome produced by several anaerobic bacteria. This complex coordinates the assembly of different glycoside hydrolases, via a high-affinity Ca(2+)-dependent interaction between the enzyme-borne dockerin and the scaffoldin-borne cohesin modules. In this study, we characterized a new protein affinity tag, ΔDoc, a truncated version (48 residues) of the Clostridium thermocellum Cel48S dockerin. The truncated dockerin tag has a binding affinity (K(A)) of 7.7 × 10(8)M(-1), calculated by a competitive enzyme-linked assay system. In order to examine whether the tag can be used for general application in affinity chromatography, it was fused to a range of target proteins, including Aequorea victoria green fluorescent protein (GFP), C. thermocellum β-glucosidase, Escherichia coli thioesterase/protease I (TEP1), and the antibody-binding ZZ-domain from Staphylococcus aureus protein A. The results of this study significantly extend initial studies performed using the Geobacillus stearothermophilus xylanase T-6 as a model system. In addition, the enzymatic activity of a C. thermocellum β-glucosidase, purified using this approach, was tested and found to be similar to that of a β-glucosidase preparation (without the ΔDoc tag) purified using the standard His-tag. The truncated dockerin derivative functioned as an effective affinity tag through specific interaction with a cognate cohesin, and highly purified target proteins were obtained in a single step directly from crude cell extracts. The relatively inexpensive beaded cellulose-based affinity column was reusable and maintained high capacity after each cycle. This study demonstrates that deletion into the first Ca(2+)-binding loop of the dockerin module results in an efficient and robust affinity tag that can be generally applied for protein purification.     

Engineered proteins containing the cohesin and dockerin domains from Clostridium thermocellum provides a reversible, high affinity interaction for biotechnology applications

The cohesin-dockerin interaction, which is responsible for the formation of the cellulosome complex of cellulolytic bacteria, is a calcium-dependent, high affinity interaction. In this study, the cohesin (Cip7) and dockerin (Doc) domains of Clostridium thermocellum were fused to the cellulose-binding domain (CBD) of C. cellulovorans and the antibody-binding domain, protein LG, respectively, to form CBD-Cip7 and LG-Doc. Immobilised CBD-Cip7 was able to bind LG-Doc and subsequently antibody as determined using surface plasmon resonance. Binding was reversed by the removal of Ca2+ with EDTA. The dockerin containing fusion protein was affinity purified using an immobilised cohesin domain. Elution of the LG-Doc from the cohesin column was with EDTA. This affinity chromatography was repeated using an LG-dockerin column for the purification of cohesin fusion protein. The fusion proteins created in this report have shown that the properties of the cohesin and dockerin domains can be transferred to other protein domains and that the interaction between the cohesin and dockerin is specific, Ca2+ -dependent and reversible. We have shown that the cohesin-dockerin interaction has several properties making it suitable for use in recombinant fusion protein production and purification.     

Analysis of cohesin-dockerin interactions using mutant dockerin proteins

Clostridial cellulosomes are cellulolytic complexes that are formed by highly specific interactions between one of the repeated cohesin modules present in the scaffolding protein and a dockerin module of the catalytic components. Although Clostridium thermocellum Xyn11A dockerin has a typical C. thermocellum dockerin sequence, in which two amino acid residues are species specifically conserved within the two segments of the dockerin modules, it can recognize Clostridium josui cohesin modules in a non-species-specific manner. The importance of these two conserved amino acids, which are part of the recognition site of the cohesin and dockerin interaction, was investigated by introducing mutations into the first and/or the second segments of the Xyn11A dockerin. Mutations in the first segment did not affect the interactions between dockerin and C. thermocellum and C. josui cohesins. However, mutations in the second segment prevented binding to cohesin proteins. A second round of mutations within the first segment re-established the affinity for both the C. thermocellum and the C. josui cohesins. However, this was not observed for a 'conventional' dockerin, Xyn10C. These results suggest that the combination of the first and second dockerin segments is important for the target recognition.     

Crystal structure of a cohesin module from Clostridium cellulolyticum: implications for dockerin recognition

In the assembly of the Clostridium cellulolyticum cellulosome, the multiple cohesin modules of the scaffolding protein CipC serve as receptors for cellulolytic enzymes which bear a dockerin module. The X-ray structure of a type I C. cellulolyticum cohesin module (Cc-cohesin) has been solved using molecular replacement, and refined at 2.0 A resolution. Despite a rather low sequence identity of 32 %, this module has a fold close to those of the two Clostridium thermocellum cohesin (Ct-cohesin) modules whose 3D structures have been determined previously. Cc-cohesin forms a dimer in the crystal, as do the two Ct-cohesins. We show here that the dimer exists in solution and that addition of dockerin-containing proteins dissociates the dimer. This suggests that the dimerization interface and the cohesin/dockerin interface may overlap. The nature of the overall surface and of the dimer interface of Cc-cohesin differ notably from those of the Ct-cohesin modules, being much less polar, and this may explain the species specificity observed in the cohesin/dockerin interaction of C. cellulolyticum and C. thermocellum. We have produced a topology model of a C. cellulolyticum dockerin and of a Cc-cohesin/dockerin complex using homology modeling and available biochemical data. Our model suggests that a special residue pair, already identified in dockerin sequences, is located at the center of the cohesin surface putatively interacting with the dockerin.     

Solution structure of a type I dockerin domain, a novel prokaryotic, extracellular calcium-binding domain

The type I dockerin domain is responsible for incorporating its associated glycosyl hydrolase into the bacterial cellulosome, a multienzyme cellulolytic complex, via its interaction with a receptor domain (cohesin domain) of the cellulosomal scaffolding subunit. The highly conserved dockerin domain is characterized by two Ca(2+)-binding sites with sequence similarity to the EF-hand motif. Here, we present the three-dimensional solution structure of the 69 residue dockerin domain of Clostridium thermocellum cellobiohydrolase CelS. Torsion angle dynamics calculations utilizing a total of 728 NOE-derived distance constraints and 79 torsion angle restraints yielded an ensemble of 20 structures with an average backbone r.m.s.d. for residues 5 to 29 and 32 to 66 of 0.54 A from the mean structure. The structure consists of two Ca(2+)-binding loop-helix motifs connected by a linker; the E helices entering each loop of the classical EF-hand motif are absent from the dockerin domain. Each dockerin Ca(2+)-binding subdomain is stabilized by a cluster of buried hydrophobic side-chains. Structural comparisons reveal that, in its non-complexed state, the dockerin fold displays a dramatic departure from that of Ca(2+)-bound EF-hand domains. A putative cohesin-binding surface, comprised of conserved hydrophobic and basic residues, is proposed, providing new insight into cellulosome assembly.     

Clostridium thermocellum cellulase CelT,a family 9 endoglucanase without an Ig-like domain or family 3c carbohydrate-binding module

The celT gene of Clostridium thermocellum strain F1 was found downstream of the mannanase gene man26B [Kurokawa J et al. (2001) Biosci Biotechnol Biochem 65:548–554] in pKS305. The open reading frame of celT consists of 1,833 nucleotides encoding a protein of 611 amino acids with a predicted molecular weight of 68,510. The mature form of CelT consists of a family 9 cellulase domain and a dockerin domain responsible for cellulosome assembly, but lacks a family 3c carbohydrate-binding module (CBM) and an immunoglobulin (Ig)-like domain, which are often found with family 9 catalytic domains. CelT devoid of the dockerin domain (CelTΔdoc) was constructed and purified from a recombinant Escherichia coli, and its enzyme properties were examined. CelTΔdoc showed strong activity toward carboxymethylcellulose (CMC) and barley β-glucan, and low activity toward xylan. The V _max and K _m values were 137 μmol min^–1 mg^–1 and 16.7 mg/ml, respectively, for CMC. Immunological analysis indicated that CelT is a catalytic component of the C. thermocellum F1 cellulosome. This is the first report describing the characterization of a family 9 cellulase without an Ig-like domain or family 3c CBM. Electronic Publication     

Subcellular localization of Clostridium thermocellum ORF3p, a protein carrying a receptor for the docking sequence borne by the catalytic components of the cellulosome.

The ORF3 gene of Clostridium thermocellum encodes a polypeptide (ORF3p) which contains a receptor domain for the docking sequence borne by the catalytic subunits of the cellulosome and a triplicated domain related to some bacterial cell surface proteins. It was thus surmised that ORF3p is a surface protein. In this study, this hypothesis was confirmed. Subcellular fractionation, Western blotting (immunoblotting), and electron microscopy of immunocytochemically labeled cells indicated that ORF3p produced by C. thermocellum was located in the outer surface layer of the bacterium. This layer appeared to consist of a soft matrix shedding off particulate fragments. Nonsedimenting ORF3p derived from sonicated cells was associated with high-molecular-mass fractions (> 20 MDa), probably corresponding to fragments of the outer cell layer. The same high-molecular-mass fractions also contained the cellulosomal marker CipA. Contrary to CipA, however, ORF3p was not associated with 2- to 4-MDa fractions corresponding to individual cellulosomes, and a significant fraction of ORF3p failed to bind to cellulose. It is proposed that ORF3 and ORF3p be renamed olpA and OlpA, respectively (for outer layer protein).     

Production of heterologous and chimeric scaffoldins by Clostridium acetobutylicum ATCC 824

Clostridium acetobutylicum ATCC 824 converts sugars and various polysaccharides into acids and solvents. This bacterium, however, is unable to utilize cellulosic substrates, since it is able to secrete very small amounts of cellulosomes. To promote the utilization of crystalline cellulose, the strategy we chose aims at producing heterologous minicellulosomes, containing two different cellulases bound to a miniscaffoldin, in C. acetobutylicum. A first step toward this goal describes the production of miniCipC1, a truncated form of CipC from Clostridium cellulolyticum, and the hybrid scaffoldin Scaf 3, which bears an additional cohesin domain derived from CipA from Clostridium thermocellum. Both proteins were correctly matured and secreted in the medium, and their various domains were found to be functional.     

Insights into the structural determinants of cohesin-dockerin specificity revealed by the crystal structure of the type II cohesin from Clostridium thermocellum SdbA

The plant cell wall degrading enzymes expressed by anaerobic microorganisms form large multienzyme complexes (cellulosomes). Cellulosomes assemble by the Type I dockerins on the catalytic subunits binding to the reiterated Type I cohesins in the molecular scaffold, while Type II dockerin-cohesin interactions anchor the complex onto the bacterial cell surface. Type I and Type II cohesin, dockerin pairs show no cross-specificity. Here we report the crystal structure of the Type II cohesin (CohII) from the Clostridium thermocellum cell surface anchoring protein SdbA. The protein domain contains nine beta-strands and a small alpha-helix. The beta-strands assemble into two elongated beta-sheets that display a typical jelly roll fold. The structure of CohII is very similar to Type I cohesins, and the dockerin binding site, which is centred at beta-strands 3, 5 and 6, is likely to be conserved in the two proteins. Subtle differences in the topology of the binding sites and a lack of sequence identity in the beta-strands that comprise the core of the dockerin binding site explain why Type I and Type II cohesins display such distinct specificities for their target dockerins.