A novel method to prepare size-regulated spheroids composed of human dermal fibroblasts

A simple method to prepare size-regulated spheroids has been successfully developed by combining a temperature responsive polymer, poly-N-isopropyl-acrylamide (PNIPAAm), conjugated with collagen and ultraviolet (UV) irradiation with photomasks. The coating layer composed of PNIPAAm conjugated with collagen functions as a cell substratum at 37 degrees C, then when lowering the temperature of culture medium the cells attached to it detach as a self-supporting sheet. This is because PNIPAAm dissolves into the culture medium below the lower critical solution temperature LCST; about 30 degrees C, but it is insoluble above the LCST. The detached cell sheet forms a multicellular spheroid. On the other hand, UV effectively immobilized collagen in the coating layer because UV generates crosslinkages in collagen molecules. Crosslinkages were quantitatively introduced by controlling the energy of UV-irradiation thus the ability of human dermal fibroblasts to attach to and detach from the surface was tightly controlled. When the collagen content in the coating layer was 9 mug/cm(2) (collagen ratio, 4.5%), UV-irradiation energy of 2000 J/m(2) was suitable to obtain 100% of the attachability and detachability. However, the cells did not attach to the nonirradiated surface at this collagen content because insufficient collagen was immobilized. Using photomakes to apply UV-irradiation, it was possible to obtain cell-adhesive areas(irradiated areas) and nonadhesive areas (nonirradiated areas) on the same surface. Consequently, spheroids of any size and in any number from one dish were prepared. The viability of cells in spheroids 350 mum in diameter was maintained at a high level for 28 days; however, viability of spheroids 800 mum in diameter rapidly decreased for 2 days. The size was very important to maintain the viability. This novel method is useful to develop size-regulated spheroids for different applications; for example, in toxicology tests. (c) 1994 John Wiley & Sons, Inc.     

Stepwise assembly of micropatterned co‐cultures using photoresponsive culture surfaces and its application to hepatic tissue arrays

Cell micropatterning, a method to place cells at arbitrary regions, is becoming an essential tool to conduct cell biology and tissue engineering. Conventional cell patterning techniques usually allow only single patterning with single cell type on the same culture surface. However, biomedical research today requires even sophisticated fabrication methods that require spatiotemporal control of multiple cell arrangements. Here we introduce in situ cell micropatterning system which enables stepwise cell patterning using a photoresponsive cell culture surface (PRCS) whose cell adhesiveness could be altered by the UV irradiation. To demonstrate an application to tissue engineering, a liver‐mimic tissue array was fabricated and liver‐specific gene expressions were quantified with real time PCR. Patterned co‐culture systems composed of HepG2 spheroids with Balb/3T3 were fabricated, and the optimum spheroid diameter, which yielded the highest cellular functions, was determined to be 150 µm. After 20 days of patterned co‐culture of HepG2 spheroids and Balb/3T3, CYP3A4 expression increased 50‐fold higher than conventionally cultured HepG2; CYP3A4 expression was 20% higher than randomly co‐cultured HepG2 and Balb/3T3. Thus the combination of PRCS and the photomask‐free irradiation apparatus showed the versatility of experimental setups and proved to be a powerful tool for biomedical studies. Biotechnol. Bioeng. 2009;103: 552–561. © 2009 Wiley Periodicals, Inc.     

In situ harvesting of adhered target cells using thermoresponsive substrate under a microscope: principle and instrumentation

A novel technique and instrumented device were developed to harvest target cells from multicellular mixture of different cell types under a microscope. The principle of the technique is that cells cultured on a thermoresponsive-substance-coated dish were detached by a region-specific cooling device and simultaneously harvested using a micropipette, both of which were assembled in an inverted microscope. Thermoresponsive coating consists of the mixture of poly(N-isopropylacrylamide) (PNIPAAm) and PNIPAAm-grafted gelatin. The former non-cell-adhesive polymer dissolves below at 32.1 degrees C in water and precipitates over that temperature (called lower critical solution temperature, LCST), and the latter cell-adhesive polymer has LCST of 34.1 degrees C. The appropriate mixing ratio of these thermoresponsive polymers exhibited high cell adhesion at physiological temperature and complete cell detachment at room temperature. A device developed as to cool at only a tiny area of the bottom of the dish, beneath which a cell that was targeted under a microscope, was assembled in a microscope. It was demonstrated that single cell or two cells that adhered to each other was detached from the surface and harvested by a micropipette within approximately 30s.     

Retrieval of rat aortic smooth muscle cells as intact cell sheet for regenerative medicine: a cost effective approach using photo polymerization

Cell-based therapeutics are promising routes for the regeneration of damaged cells and organs. The recovery of cells cultured in vitro for such applications requires the use of proteolytic enzymes which deteriorate its property by disruption of cell–cell and cell–matrix interactions. Intact cell sheets can be retrieved with the use of thermo responsive polymer grafted on to the culture plates. Our study presents the use of photo-polymerization as a simple and inexpensive way to create thermo-responsive culture surfaces for the detachment of intact cell sheet. Poly (N-isopropyl acrylamide) (PNIPAAm) was synthesized by photo-polymerization and characterized by NMR spectroscopy, differential scanning calorimetry and gel permeation chromatography. Thermo-responsive culture dishes were prepared by the coating method and characterized for its thermo-responsive efficacy using FTIR spectroscopy and water contact angle measurements. Atomic force microscopy depicted the thin coating achieved with this method is similar to the conventional grafting method. Suitability for cell culture and cell sheet retrieval was assessed by culturing rat aortic smooth muscle cells in the PNIPAAm coated tissue culture plates. The cells remained viable as evident from the live dead assay and the cell sheet was detached by low temperature treatment. The results demonstrate a versatile method for creating thermo responsive culture surfaces while eliminating the use of expensive radiation sources for the conventional grafting method.     

Cell behavior observation and gene expression analysis of melanoma associated with stromal fibroblasts in a three‐dimensional magnetic cell culture array

A three‐dimensional (3D) multicellular tumor spheroid culture array has been fabricated using a magnetic force‐based cell patterning method, analyzing the effect of stromal fibroblast on the invasive capacity of melanoma. Formation of spheroids was observed when array‐like multicellular patterns of melanoma were developed using a pin‐holder device made of magnetic soft iron and an external magnet, which enables the assembly of the magnetically labeled cells on the collagen gel‐coated surface as array‐like cell patterns. The interaction of fibroblast on the invasion of melanoma was investigated using three types of cell interaction models: (i) fibroblasts were magnetically labeled and patterned together in array with melanoma spheroids (direct‐interaction model), (ii) fibroblasts coexisting in the upper collagen gel (indirect‐interaction model) of melanoma spheroids, and (iii) fibroblast‐sheets coexisting under melanoma spheroids (fibroblast‐sheet model). The fibroblast‐sheet model has largely increased the invasive capacity of melanoma, and the promotion of adhesion, migration, and invasion were also observed. In the fibroblast‐sheet model, the expression of IL‐8 and MMP‐2 increased by 24‐fold and 2‐fold, respectively, in real time RT‐PCR compared to the absence of fibroblasts. The results presented in this study demonstrate the importance of fibroblast interaction to invasive capacity of melanoma in the 3D in vitro bioengineered tumor microenvironment. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2013     

Method for the determination of oxygen consumption rates and diffusion coefficients in multicellular spheroids

A method has been developed for the quantitative evaluation of oxygen tension (PO2) distributions in multicellular spheroids measured with O2-sensitive microelectrodes. The experimental data showed that multicellular tumor spheroids in stirred growth media were characterized by a diffusion-depleted zone surrounding the spheroids. This zone was elicited by an unstirred layer of medium next to the spheroid leading to a continuous decrease in the PO2 values from the bulk medium towards the spheroid surface. Theoretical considerations demonstrate that the volume-related O2 consumption rate, Q, in the spheroids can be assessed by measuring the PO2 gradient in the diffusion-depleted zone outside the spheroids. Accordingly, Krogh's diffusion constant, KS, in the spheroids can be determined through measuring the PO2 gradient within the spheroids. The results obtained suggest that multicellular spheroids represent useful in vitro tumor models for the experimental and theoretical analysis of the interrelationship among O2 supply to tumor cells, O2 metabolism in tumors tissue, and the responsiveness of cancer cells to treatment.     

The effect of combined heat and ultrasound on multicellular tumour spheroids

The effect of combined ultrasound and heat treatments on Chinese hamster multicellular spheroids of varying size was investigated using growth rate, single cell survival and ultrastructural damage as endpoints. Ultrasonic irradiation at 37 degrees C had no effect on the growth rate of 200-730 microns spheroids. Similarly there was no effect on the growth rate of 350 microns spheroids when irradiated during a 60 min exposure to 41.5 degrees C. However, spheroids of 200-700 mm diameter showed growth delay when held at 43 degrees C for 1 h. The effect was enhanced with concomitant ultrasound irradiation but was not dependent on spheroid size. When 200 and 400 microns spheroids held at 43 degrees C for 60 min were irradiated with different ultrasonic intensities a dose-dependent decrease in surviving fraction and a dose-dependent increase in growth delay was obtained. When surviving fraction was plotted as a function of growth delay a good correlation was obtained, suggesting that the combination of heat and ultrasound irradiation does not produce cytostasis in the surviving cells of either 200 or 400 microns spheroids. At the ultrastructural level increased cytoplasmic vacuolation was the only result of ultrasonic irradiation at 37 degrees C. Exposure to 43 degrees C for 60 min was required to elicit thermal damage. This took the form of membrane evagination at the spheroid surface, vacuolation of the cytoplasm, grouping of organelles around the periphery of the nucleus, and fragmentation of the nucleolus. These effects were enhanced with concomitant ultrasonic irradiation but other features were also noted, viz. disaggregation of polyribosomes, dilation of the rough endoplasmic reticulum and blebbing of the nuclear membrane. Damage was independent of spheroid size. These results are in agreement with previous data obtained from single-cell studies. Indicating that there is a non-thermal, non-cavitational component to the cell killing in multicellular spheroids resulting from combined heat and ultrasound treatment.     

Proliferation-associated oxygen consumption and morphology of tumor cells in monolayer and spheroid culture.

The oxygen consumption rate, proliferative activity, and morphology of EMT6/Ro mouse mammary sarcoma cells in monolayer and multicellular spheroid culture have been investigated in a comparative study. During the transition of monolayer cells from the exponential into the plateau growth phase, there is a distinct decrease in the cellular volume that is associated with a corresponding decrease in the proliferative and respiratory activity of the cells. The decline in cell volume is mainly due to a decrease in the content of cytoplasm, whereas the size of the nucleus is only slightly reduced. A concomitant decrease in the number of mitochondria per cell obviously accounts for the reduction in cellular oxygen uptake. Despite a continuous decrease of cell proliferation from the surface to interior regions of EMT6 spheroids reflected by a gradient in tritiated thymidine labeling, volume-related oxygen consumption is rather uniform in viable regions of these aggregates. The finding can be explained by the results of the morphometric evaluation showing a uniform volume density of mitochondria, i.e., of oxygen-consuming sites within these spheroids.     

Phenotypic diversification of a cultured tumor line as a function of substratum

We have found that a murine hepatoma displays a considerable phenotypic diversification in culture, which depends upon the substratum utilized, and is manifested by the formation of multicellular structures of differing geometry: Monolayer on glass and plastic, thick multilayer pads on Gelfilm, and spheroids on agar and agarose. These multicellular morphological phenotypes were assayed without disruption to ascertain their antigenicity in vitro and their tumorigenicity in vivo and to obtain quantitative information on the effect of the spatial arrangement of the hepatoma cells upon the ability of each multicellular structure to interact, as a whole, with molecules and cells in its surroundings. The antigenicity of the multicellular structures was determined with calibrated probes and a methodology that measures the total antigenicity, as well as antigenicity per unit of surface area. Antigenicity was found to differ in the following decreasing order: Monolayer on plastic > spheroids on agarose > spheroids on agar > multilayer on Gelfilm. At least part of these antigenic variants arise from different degrees of masking of the structures' surface determinants by a trypsin-sensitive material. The multicellular phenotypes also differed in tumorigenicity. When assayed in syngeneic hosts under comparable conditions, agar-grown spheroids produced the fewest tumors, whereas Gelfilm-grown multilayers produced the most. These two independent sets of data show that the various geometries that a tumor tissue is induced to acquire by the culture substratum are accompanied by a distinctive combination of surface and biological properties.     

Plasminogen activator/plasmin system regulates formation of the hepatocyte spheroids

The isolated rat hepatocytes inoculated onto the surface of positively charged culture dishes are anchored initially and then begin to migrate and aggregate gradually to form multicellular spheroids detached from the dish. We studied the roles of fibrinolytic factors in the spheroid formation. The fibrinolytic factors, tissue-type plasminogen activator (tPA), and urokinase-type plasminogen activator (uPA), were increased in the course of spheroid formation. Then, we introduced fibrinolytic inhibitors into the spheroid cultures to determine functions of fibrinolytic factors. Plasmin inhibitor inhibited markedly the spheroid formation. Interestingly, the anti-plasmin antibody showed different effect depending on the timing of its administration. In summary, we demonstrated for the first time that induction of PAs and ensuing plasmin generation on the cell surface play important roles in hepatocyte spheroid formation, and that plasmin is involved in the different processes such as cell migration and cell detachment in the formation of hepatocyte spheroid.     

Study of the Chemotactic Response of Multicellular Spheroids in a Microfluidic Device

We report the first application of a microfluidic device to observe chemotactic migration in multicellular spheroids. A microfluidic device was designed comprising a central microchamber and two lateral channels through which reagents can be introduced. Multicellular spheroids were embedded in collagen and introduced to the microchamber. A gradient of fetal bovine serum (FBS) was established across the central chamber by addition of growth media containing serum into one of the lateral channels. We observe that spheroids of oral squamous carcinoma cells OSC–19 invade collectively in the direction of the gradient of FBS. This invasion is more directional and aggressive than that observed for individual cells in the same experimental setup. In contrast to spheroids of OSC–19, U87-MG multicellular spheroids migrate as individual cells. A study of the exposure of spheroids to the chemoattractant shows that the rate of diffusion into the spheroid is slow and thus, the chemoattractant wave engulfs the spheroid before diffusing through it.     

Modeling mechanical inhomogeneities in small populations of proliferating monolayers and spheroids

Understanding the mechanical behavior of multicellular monolayers and spheroids is fundamental to tissue culture, organism development, and the early stages of tumor growth. Proliferating cells in monolayers and spheroids experience mechanical forces as they grow and divide and local inhomogeneities in the mechanical microenvironment can cause individual cells within the multicellular system to grow and divide at different rates. This differential growth, combined with cell division and reorganization, leads to residual stress. Multiple different modeling approaches have been taken to understand and predict the residual stresses that arise in growing multicellular systems, particularly tumor spheroids. Here, we show that by using a mechanically robust agent-based model constructed with the peridynamic framework, we gain a better understanding of residual stresses in multicellular systems as they grow from a single cell. In particular, we focus on small populations of cells (1–100 s) where population behavior is highly stochastic and prior investigation has been limited. We compare the average strain energy density of cells in monolayers and spheroids using different growth and division rules and find that, on average, cells in spheroids have a higher strain energy density than cells in monolayers. We also find that cells in the interior of a growing spheroid are, on average, in compression. Finally, we demonstrate the importance of accounting for stochastic fluctuations in the mechanical environment, particularly when the cellular response to mechanical cues is nonlinear. The results presented here serve as a starting point for both further investigation with agent-based models, and for the incorporation of major findings from agent-based models into continuum scale models when explicit representation of individual cells is not computationally feasible.     

Recent advances in three-dimensional multicellular spheroid culture for biomedical research

Many types of mammalian cells can aggregate and differentiate into 3-D multicellular spheroids when cultured in suspension or a nonadhesive environment. Compared to conventional monolayer cultures, multicellular spheroids resemble real tissues better in terms of structural and functional properties. Multicellular spheroids formed by transformed cells are widely used as avascular tumor models for metastasis and invasion research and for therapeutic screening. Many primary or progenitor cells on the other hand, show significantly enhanced viability and functional performance when grown as spheroids. Multicellular spheroids in this aspect are ideal building units for tissue reconstruction. Here we review the current understanding of multicellular spheroid formation mechanisms, their biomedical applications, and recent advances in spheroid culture, manipulation, and analysis techniques.     

Differential sensitivity to short-chain ceramide analogues of human intestinal carcinoma cells grown in tumor spheroids versus monolayer culture

The cytotoxic activity of short-chain (C(2)) ceramide was evaluated in human intestinal carcinoma cells grown as multicellular tumor spheroids versus the same cells cultured as monolayers under closely comparable conditions. A decrease in cell number was seen in monolayer cultures of HT-29, Caco-2, and HRT-18 cells, with an EC(50) (concentration for half-maximal toxicity) of between 13 and 23 microM. However, when the same cells were grown in the multicellular spheroid format, C(2) was markedly less potent in reducing cell number, with an EC(50) of between 44 and 63 microM, representing a 1.9- to 4.9-fold decrease in its potency. The chemotherapeutic agents 5-fluorouracil and cisplatin were equally potent against spheroids and monolayer cultures, indicating that although drug access is a problem in conventionally grown tumor spheroids it is not a problem for spheroids grown under the conditions used in this study. Our results suggest that although ceramide is capable of inducing cell death in intestinal carcinoma cells grown in spheroid culture, its cellular toxicity is constrained by influences that are independent of drug access and may be the consequence of the altered cellular relationships. Carcinoma cell populations show an intrinsically decreased responsiveness to the effects of ceramide when they are grown in a three-dimensional culture format.     

Cultured human nasal epithelial multicellular spheroids: polar cyst-like model tissues

We report here a new readily cultured nonadherent hollow spheroidal epithelial tissue model: human nasal epithelial multicellular spheroids, prepared from brushings of human nasal epithelium in vivo. Although cultured cyst-like epithelial models developed from embryonic, transformed, or polypoid tissues have been reported previously, human nasal epithelial multicellular spheroids are derived from normal mature nontransformed human airway epithelial cells. In our studies, spheroids ranged in size from 50 to 700 microns diameter (averaging approximately 250 microns). Cells of the spheroid displayed morphological polarity and formed junctional complexes. Transcellular electrolyte transport may underlie the increase in spheroid size which occurred in culture. The ease and simplicity of the brushing and culture procedures reported here render normal and diseased human cell populations more readily accessible to investigation. We believe human nasal epithelial multicellular spheroids may have important applications in the study of electrolyte and fluid transport processes, ciliary motility, epithelial polarity, cellular metabolism, and drug cytotoxicity in normal and pathophysiological states of the human respiratory tract (e.g., cystic fibrosis).     

The growth and morphology of FRTL-5 thyroid epithelial cells grown as multicellular spheroids in vitro

Summary FRTL-5 cells, a diploid line of differentiated rat thyroid epithelial cells, have been grown as multicellular spheroids in spinner culture. Spheroids were initiated by seeding FRTL-5 cells either into Lab-Tek dishes or culture flasks with a 0.5% agar base. Thyroid stimulating hormone (TSH, >1.0 mU/ml) was required for initial cell aggregation and spheroid growth. After 1 wk cellular aggregates were transferred to suspension culture in spinner flasks. As with FRTL-5 monolayer cultures, continued spheroid growth required the addition of TSH to the culture medium. The most unique characteristic of the FRTL-5 spheroids was the development of central lumina similar to thyroid follicles in vivo. Follicular structures were absent from spheroids not stimulated with TSH. In the presence of TSH epithelial cells seem metabolically active with morphological evidence of biosynthesis of thyroglobulin-like material and basal laminar-like components. In contrast, all evidence of cellular metabolic activity is absent from cells in spheroids maintained in the absence of TSH. Thus, nontransformed FRTL-5 cells grown as three-dimensional multicellular spheroids responded to hormonal manipulation in a manner comparable to follicular epithelial cells in vivo. This spheroid model might therefore prove to be a very effective tool for investigating aspects of thyroid physiology and pathology in vitro. This work was supported by Grant CA-11198 and CA-20329 awarded by the National Institutes of Health, and a Biomedical Research Support Grant awarded to R. T. Mulcahy.     

Optimization of the formation of embedded multicellular spheroids of MCF-7 cells: How to reliably produce a biomimetic 3D model

To obtain a multicellular MCF-7 spheroid model to mimic the three-dimensional (3D) of tumors, the microwell liquid overlay (A) and hanging-drop/agar (B) methods were first compared for their technical parameters. Then a method for embedding spheroids within collagen was optimized. For method A, centrifugation assisted cells form irregular aggregates but not spheroids. For method B, an extended sedimentation period of over 24 h for cell suspensions and increased viscosity of the culture medium using methylcellulose were necessary to harvest a dense and regular cell spheroid. When the number was less than 5000 cells/drop, embedded spheroids showed no tight cores and higher viability than the unembedded. However, above 5000 cells/drop, cellular viability of embedded spheroids was not significantly different from unembedded spheroids and cells invading through the collagen were in a sun-burst pattern with tight cores. Propidium Iodide staining indicated that spheroids had necrotic cores. The doxorubicin cytotoxicity demonstrated that spheroids were less susceptible to DOX than their monolayer cells. A reliable and reproducible method for embedding spheroids using the hanging-drop/agarose method within collagen is described herein. The cell culture model can be used to guide experimental manipulation of 3D cell cultures and to evaluate anticancer drug efficacy.     

Decreased adherence to the substrate in Rous sarcoma virus-transformed chicken embryo fibroblasts.

Cell-substrate adherence in cultures of chicken embryo fibroblasts was examined by determining the number of cells which could be detached from the culture dish by a stream of medium. Transformed cells were significantly less adherent than their normal counterparts. In cultures infected with a mutant of Rous sarcoma virus which is temperature-conditional for transformation, adherence changed promptly following a temperature shift. This change did not require progression through the cell cycle. The transformation-specific decrease in adherence required new protein synthesis, but the restoration of adherence which occurred following a shift to the restrictive temperature could occur in the absence of new protein synthesis. Inhibitor experiments suggested the importance of microfilaments and perhaps microtubules in the changes in detachability. In addition, there was a positive correlation between levels of surface LETS protein and cell substrate adherence following a temperature shift, although it seems probable that the bulk of the surface LETS is neither necessary nor sufficient for maintenance of normal cell substrate adherence.     

Isolation of UV-sensitive variants of CHO-K1 by nylon cloth replica plating.

Techinques are described which permit the identification and isolation of UV-sensitive variants from mutagenized populations of Chinese hamster ovary (CHO) cells. Identification is based on the observation that within two days after receiving a dose of approximately 240 ergs/mm2 of UV irradiation most of the cells in a colony of CHO detach from the surface of a plastic tissue culture dish. At a lower dose of UV, which does not kill or detach a significant number of parental cells, UV-sensitive colonies are killed and become detached. Thus a clear plaque is produced in a lawn of unirradiated parental cells, marking the site occupied by a sensitive colony. Live cells from such sensitive colonies have been recovered from a nylon cloth replica prepared prior to irradiation and characterized. One UV-sensitive variant (CHO-UV-1) is indistinguishable from parental cells in X-ray resistance, chromosome number, generation time, and duration of the phases of the cell cycle. For UV irradiation the hit number (-n), shoulder width (Dq), and mean lethal dose (Do) for the variant are 2.8, 21 ergs/mm2, and 21 ergs/mm2, respectively, as compared to 2.6, 36 ergs/mm2, and 45 ergs/mm2 for CHO-K1 cells. These values have not changed for a period of eight months in culture.     

Efficient assembly of rat hepatocyte spheroids for tissue engineering applications

Freshly harvested primary rat hepatocytes cultivated as multicellular aggregates, or spheroids, have been observed to exhibit enhanced liver-specific function and differentiated morphology compared to cells cultured as monolayers. An efficient method of forming spheroids in spinner vessels is described. Within 24 h after inoculation, greater than 80% of inoculated cells formed spheroids. This efficiency was significantly greater than that reported previously for formation in stationary petri dishes. With a high specific oxygen uptake rate of 2.0 x 10(-9) mmol O(2)/cell/h, the oxygen supply is critical and should be monitored for successful formation. Throughout a 6-day culture period, spheroids assembled in spinner cultures maintained a high viability and produced albumin and urea at constant rates. Transmission electron microscopy indicated extensive cell-cell contacts and tight junctions between cells within spheroids. Microvilli-lined bile canaliculus-like channels were observed in the interior of spheroids and appeared to access the exterior through pores at the outer surface. Spheroids from spinner cultures exhibited at least the level of liver-specific activity as well as similar morphology and ultrastructure compared to spheroids formed in stationary petri dishes. Hepatocytes cultured as spheroids are potentially useful three-dimensional cell systems for application in a bioartificial liver device and for studying xenobiotic drug metabolism. (c) 1996 John Wiley & Sons, Inc.