Evaluation of Small Intestine Grafts Decellularization Methods for Corneal Tissue Engineering

Advances in the development of cornea substitutes by tissue engineering techniques have focused on the use of decellularized tissue scaffolds. In this work, we evaluated different chemical and physical decellularization methods on small intestine tissues to determine the most appropriate decellularization protocols for corneal applications. Our results revealed that the most efficient decellularization agents were the SDS and triton X-100 detergents, which were able to efficiently remove most cell nuclei and residual DNA. Histological and histochemical analyses revealed that collagen fibers were preserved upon decellularization with triton X-100, NaCl and sonication, whereas reticular fibers were properly preserved by decellularization with UV exposure. Extracellular matrix glycoproteins were preserved after decellularization with SDS, triton X-100 and sonication, whereas proteoglycans were not affected by any of the decellularization protocols. Tissue transparency was significantly higher than control non-decellularized tissues for all protocols, although the best light transmittance results were found in tissues decellularized with SDS and triton X-100. In conclusion, our results suggest that decellularized intestinal grafts could be used as biological scaffolds for cornea tissue engineering. Decellularization with triton X-100 was able to efficiently remove all cells from the tissues while preserving tissue structure and most fibrillar and non-fibrillar extracellular matrix components, suggesting that this specific decellularization agent could be safely used for efficient decellularization of SI tissues for cornea TE applications.     

冻融联合灌注法优化大鼠肾脏脱细胞支架的制备

本研究旨在探索优化肾脏脱细胞支架的制备方法,为肾脏组织工程及肾脏体外病理、毒理研究提供实验基础。取大鼠肾脏灌注PBS作为对照组 (Control组),在不同流速下分别以十二烷基磺酸钠 (Sodium dodecyl sulfate,SDS) 灌注 (S组),Triton X-100联合SDS灌注 (TS组),反复冻融后Triton X-100联合SDS灌注(FTS组),制备肾脏脱细胞支架,并测定其流体分布及脉管阻力。HE染色、DAPI染色、DNA定量检测脱细胞支架脱细胞程度,Masson染色、PAS染色、免疫组织化学染色检测脱细胞支架主要成分的保留和结构的完整,扫描电镜检测支架的超微结构,MTT法检测支架的细胞毒性,ELISA检测支架中生长因子的含量。结果显示,FTS组脱细胞用时较S组、TS组少,10 mL/min组支架脉管阻力较低,S组、TS组、FTS组流体分布与Control组存在差异。HE染色和DAPI染色显示各组支架未见细胞成分残留,DNA含量＜50 ng/mg。Masson染色和PAS染色可见细胞外网状胶原及多糖,免疫组织化学染色见Ⅰ型胶原 (CollagenⅠ)、Ⅳ型胶原蛋白 (Collagen Ⅳ)、纤维连接蛋白 (Fibronectin)、层粘连蛋白 (Laminin) 表达。扫描电镜见支架呈蜂窝状结构。MTT法检测支架细胞毒性分级在0–1级之间。ELISA检测提示FTS组VEGF、EGF、IGF-1、PDGF含量明显高于S组和TS组。综上,联合冻融和灌注法能够制备更为理想且有效的大鼠肾脏整器官脱细胞支架,为肾脏组织工程及肾脏体外病理、毒理学研究奠定基础。     

Characterization and assessment of hyperelastic and elastic properties of decellularized human adipose tissues

Decellularized adipose tissue (DAT) has shown potential as a regenerative scaffold for plastic and reconstructive surgery to augment or replace damaged or missing adipose tissue (e.g. following lumpectomy or mastectomy). The mechanical properties of soft tissue substitutes are of paramount importance in restoring the natural shape and appearance of the affected tissues, and mechanical mismatching can lead to unpredictable scar tissue formation and poor implant integration. The goal of this work was to assess the linear elastic and hyperelastic properties of decellularized human adipose tissue and compare them to those of normal breast adipose tissue. To assess the influence of the adipose depot source on the mechanical properties of the resultant decellularized scaffolds, we performed indentation tests on DAT samples sourced from adipose tissue isolated from the breast, subcutaneous abdominal region, omentum, pericardial depot and thymic remnant, and their corresponding force–displacement data were acquired. Elastic and hyperelastic parameters were estimated using inverse finite element algorithms. Subsequently, a simulation was conducted in which the estimated hyperelastic parameters were tested in a real human breast model under gravity loading in order to assess the suitability of the scaffolds for implantation. Results of these tests showed that in the human breast, the DAT would show similar deformability to that of native normal tissue. Using the measured hyperelastic parameters, we were able to assess whether DAT derived from different depots exhibited different intrinsic nonlinearities. Results showed that DAT sourced from varying regions of the body exhibited little intrinsic nonlinearity, with no statistically significant differences between the groups.     

Preparation of adriamycin gelatin microsphere-loaded decellularized periosteum that is cytotoxic to human osteosarcoma cells

The purpose of this study was to develop a novel approach to treat bone osteosarcoma using a multipurpose scaffold aiming for local drug delivery. The slowly releasing microspheres was designed to deliver the chemotherapy drug adriamycin (ADM) and a decellularized (D) periosteum scaffold (which is known to be able to promote bone regeneration) was used to carry these microspheres. D-periosteum was obtained by physical and chemical decellularization. Histological results showed that the cellular components were effectively removed. The D-periosteum showed an excellent cytocompatibility and the ability to promote adhesion and growth of fibroblasts. Two kinds of slowly releasing microspheres, adriamycin gelatin microspheres (ADM-GMS) and adriamycin poly (dl-lactide-co-glycolide) gelatin microspheres (ADM-PLGA-GMS), were prepared and anchored to D-periosteum, resulting in two types of drug-releasing regenerative scaffolds. The effectiveness of these two scaffolds in killing human osteosarcoma cells was tested by evaluating cell viability overtime of the cancer cells cultured with the scaffolds. In summary, a gelatin/decellularized periosteum-based biologic scaffold material was designed aiming for local delivery of chemotherapy drugs for osteosarcoma, with the results showing ability of the scaffolds in sustaining release of the cancer drug and in suppressing growth of the cancer cells in vitro.     

Optimized decellularization protocol including α-Gal epitope reduction for fabrication of an acellular porcine annulus fibrosus scaffold

Recent advances in tissue engineering have led to potential new strategies, especially decellularization protocols from natural tissues, for the repair, replacement, and regeneration of intervertebral discs. This study aimed to validate our previously reported method for the decellularization of annulus fibrosus (AF) tissue and to quantify potentially antigenic α-Gal epitopes in the decellularized tissue. Porcine AF tissue was decellularized using different freeze–thaw temperatures, chemical detergents, and incubation times in order to determine the optimal method for cell removal. The integrity of the decellularized material was determined using biochemical and mechanical tests. The α-Gal epitope was quantified before and after decellularization. Decellularization with freeze–thaw in liquid nitrogen, an ionic detergent (0.1% SDS), and a 24 h incubation period yielded the greatest retention of GAG and collagen relative to DNA reduction when tested as single variables. Combined, these optimal decellularization conditions preserved more GAG while removing the same amount of DNA as the conditions used in our previous study. Components and biomechanical properties of the AF matrix were retained. The decellularized AF scaffold exhibited suitable immune-compatibility, as evidenced by successful in vivo remodeling and a decrease in the α-Gal epitope. Our study defined the optimal conditions for decellularization of porcine AF tissues while preserving the biological composition and mechanical properties of the scaffold. Under these conditions, immunocompatibility was evidenced by successful in vivo remodeling and reduction of the α-Gal epitope in the decellularized material. Decellularized AF scaffolds are potential candidates for clinical applications in spinal surgery.     

去细胞方法及其在组织工程中的应用

去细胞基质在组织工程及再生医学的大量应用为解决组织器官的修复和重建等难题带来了希望。去细胞方法大致可以分为三类:化学处理法、物理处理法及酶学处理法,且已经应用于组织工程及再生医学的各个方面。本文总结并分类目前常用的去细胞方法及其在组织工程各方面的应用,对目前国内外常用的去细胞方法及其在组织工程及再生医学中的应用进行回顾总结与分析。     

去细胞方法及其在组织工程中的应用

去细胞基质在组织工程及再生医学的大量应用为解决组织器官的修复和重建等难题带来了希望。去细胞方法大致可以分为三类：化学处理法、物理处理法及酶学处理法,且已经应用于组织工程及再生医学的各个方面。本文总结并分类目前常用的去细胞方法及其在组织工程各方面的应用,对目前国内外常用的去细胞方法及其在组织工程及再生医学中的应用进行回顾总结与分析。     

Impact of decellularization of xenogeneic tissue on extracellular matrix integrity for tissue engineering of heart valves

The multidisciplinary research of tissue engineering utilizes biodegradable or decellularized scaffolds with autologous cell seeding. Objective of this study was to investigate the impact of different decellularization protocols on extracellular matrix integrity of xenogeneic tissue by means of multiphoton femtosecond laser scanning microscopy, biochemical and histological analysis. Pulmonary valves were dissected from porcine hearts and placed in a solution of trypsin-EDTA and incubated at 37 degrees C for either 5, 8, or 24 h, followed by a 24 h PBS washing. Native and decellularized valves were processed for histology, DNA, cell proliferation, matrix proteins and biomechanical testing. Multiphoton NIR laser microscopy has been applied for high-resolution 3D imaging of collagen and elastin. Distinct differences in several ECM components following decellularization time were observed. Total GAG contents decreased in a time-dependent manner, with o-sulfated GAGs being more susceptible to degradation than n-sulfated GAGs. Efficiency of insoluble collagen extraction increased proportionally with decellularization time, suggesting ECM-integrity may be compromised with prolonged incubation. Biomechanical testing revealed a gradual weakening of mechanical strength with increased decellularization time. The enzymatic decellularization process of heart valves revealed a time-dependent loss of cells, ECM components and biomechanical strength. In order to avoid any immune response a thorough decellularization of 24 h remains mandatory.     

Hearts beating through decellularized scaffolds: whole-organ engineering for cardiac regeneration and transplantation

Whole-organ decellularization and tissue engineering approaches have made significant inroads during recent years. If proven to be successful and clinically viable, it is highly likely that this field would be poised to revolutionize organ transplantation surgery. In particular, whole-heart decellularization has captured the attention and imagination of the scientific community. This technique allows for the generation of a complex three-dimensional (3D) extracellular matrix scaffold, with the preservation of the intrinsic 3D basket-weave macroarchitecture of the heart itself. The decellularized scaffold can then be recellularized by seeding it with cells and incubating it in perfusion bioreactors in order to create functional organ constructs for transplantation. Indeed, research into this strategy of whole-heart tissue engineering has consequently emerged from the pages of science fiction into a proof-of-concept laboratory undertaking. This review presents current trends and advances, and critically appraises the concepts involved in various approaches to whole-heart decellularization and tissue engineering.     

Biomechanical properties of decellularized porcine common carotid arteries

To analyze the effects of decellularization on the biomechanical properties of porcine common carotid arteries, decellularization was performed by a detergent-enzymatic procedure that preserves extracellular matrix scaffold. Internal diameter, external diameter, and wall thickness were measured by optical microscopy on neighboring histological sections before and after decellularization. Rupture tests were conducted. Inner diameter and wall thickness were measured by echo tracking during pressure inflation from 10 to 145 mmHg. Distensibility and incremental elastic modulus were computed. At 10 mmHg, mean diameter of decellularized arteries was 5.38 mm, substantially higher than controls (4.1 mm), whereas decellularized and control arteries reached the same internal diameter (6.7 mm) at 145 mmHg. Wall thickness decreased 16% for decellularized and 32% for normal arteries after pressure was increased from 10 to 145 mmHg. Decellularized arteries withstood pressure >2,200 mmHg before rupture. At 145 mmHg, decellularization reduced compliance by 66% and increased incremental elastic modulus by 54%. Removal of cellular elements from media led to changes in arterial dimensions. Collagen fibers engaged more rapidly during inflation, yielding a stiffer vessel. Distensibility was therefore significantly lower (by a factor of 3) in decellularized than in normal vessels: reduced in the physiological range of pressures. In conclusion, decellularization yields vessels that can withstand high inflation pressures with, however, markedly different geometrical and biomechanical properties. This may mean that the potential use of a decellularized artery as a scaffold for the creation of xenografts may be compromised because of geometrical and compliance mismatch.     

In-vivo organ engineering: Perfusion of hepatocytes in a single liver lobe scaffold of living rats

Organ decellularization is emerging as a promising regenerative medicine approach as it is able to provide an acellular, three-dimensional biological scaffold material that can be seeded with living cells for organ reengineering. However this application is currently limited to donor-derived decellularized organs for reengineering in vitro and no study has been conducted for re-engineering the decellularized organ in vivo. We developed a novel technique of a single liver lobe decellularization in vivo in live animals. Using a surgical method to generate a by-pass circulation through the portal vein and infra-hepatic vena cava with a perfusion chamber system, we decellularized the single liver lobe and recellularized it with allogenic primary hepatocytes. Our results showed that the decellularization process in vivo can preserve the vascular structural network and functional characteristics of the native liver lobe. It allows for efficient recellularization of the decellularized liver lobe matrix with allogenic primary hepatocytes. Upon the re-establishment of blood circulation, the recellularized liver lobe is able to gain the function and the allogenic hepatocytes are able to secret albumin. Our findings provide a proof of principle for the in vivo reengineering of liver.     

组织器官脱细胞支架的制备及研究进展北大核心CSCD

脱细胞基质(decellularized extracellular matrix, dECM)旨在去除引起免疫排斥的细胞,保留原组织结构和成分。由于其具有与原组织器官相似的结构和成分,在组织工程和生物医学的应用上受到广泛关注,已成为一种很有前景的生物医学材料。通过适当的脱细胞方法,dECM很容易能够从组织器官中获得。文中总结了脱细胞的方法及最新研究进展,同时对脱细胞后支架灭菌、交联和保存的方式进行综述,概括了不同组织器官获得的脱细胞支架的最新应用及进展。最后对脱细胞支架目前面临的问题和挑战进行分析,并展望了未来的发展趋势。     

A tissue-engineered human dermal construct utilizing fibroblasts and transforming growth factor β1 to promote elastogenesis

Numerous studies have shown that extracellular matrix (ECM)-based scaffolds are suitable for dermal constructs for the differentiation of various cell types in vitro and for constructive tissue remodeling after implantation in vivo. However, a shortcoming of these ECM materials is its limited elastogenesis. Elastic fibers constitute an essential component of mammalian connective tissue and the presence of elastic fibers is crucial for the proper function of the cardiovascular, pulmonary, and intestinal systems. Since it is still largely unknown how cells coordinate the molecular events of elastic-fiber assembly, understanding the ability to regenerate elastic fibers in tissues remains a significant challenge. For this reason, human neonatal dermal fibroblasts (HDFneo) were analyzed for their potential to serve as a cell culture model for elastic fiber assembly. Using optical technologies such as multiphoton laser-scanning microscopy (MPSLM) we demonstrate that HDFneo stimulated with transforming growth factor β1 (TGF-β1) are able to produce a distinct and complex elastic fiber system in vitro. As shown by the desmosine and isodesmosine content, crosslinked elastic fibers were formed within the 3D ECM-based scaffold. This tissue-engineered dermal construct may prove to be an effective template for the development of medicinal approaches in regenerative soft skin tissue reconstruction through TGF-β1 induction.     

Living bacterial sacrificial porogens to engineer decellularized porous scaffolds

Decellularization and cellularization of organs have emerged as disruptive methods in tissue engineering and regenerative medicine. Porous hydrogel scaffolds have widespread applications in tissue engineering, regenerative medicine and drug discovery as viable tissue mimics. However, the existing hydrogel fabrication techniques suffer from limited control over pore interconnectivity, density and size, which leads to inefficient nutrient and oxygen transport to cells embedded in the scaffolds. Here, we demonstrated an innovative approach to develop a new platform for tissue engineered constructs using live bacteria as sacrificial porogens. E.coli were patterned and cultured in an interconnected three-dimensional (3D) hydrogel network. The growing bacteria created interconnected micropores and microchannels. Then, the scafold was decellularized, and bacteria were eliminated from the scaffold through lysing and washing steps. This 3D porous network method combined with bioprinting has the potential to be broadly applicable and compatible with tissue specific applications allowing seeding of stem cells and other cell types.     

Comparison of Decellularization Protocols for Preparing a Decellularized Porcine Annulus Fibrosus Scaffold

Tissue-specific extracellular matrix plays an important role in promoting tissue regeneration and repair. We hypothesized that decellularized annular fibrosus matrix may be an appropriate scaffold for annular fibrosus tissue engineering. We aimed to determine the optimal decellularization method suitable for annular fibrosus. Annular fibrosus tissue was treated with 3 different protocols with Triton X-100, sodium dodecyl sulfate (SDS) and trypsin. After the decellularization process, we examined cell removal and preservation of the matrix components, microstructure and mechanical function with the treatments to determine which method is more efficient. All 3 protocols achieved decellularization; however, SDS or trypsin disturbed the structure of the annular fibrosus. All protocols maintained collagen content, but glycosaminoglycan content was lost to different degrees, with the highest content with TritonX-100 treatment. Furthermore, SDS decreased the tensile mechanical property of annular fibrosus as compared with the other 2 protocols. MTT assay revealed that the decellularized annular fibrosus was not cytotoxic. Annular fibrosus cells seeded into the scaffold showed good viability. The Triton X-100–treated annular fibrosus retained major extracellular matrix components after thorough cell removal and preserved the concentric lamellar structure and tensile mechanical properties. As well, it possessed favorable biocompatibility, so it may be a suitable candidate as a scaffold for annular fibrosus tissue engineering.     

Mesenchymal stromal cell‐derived factors promote the colonization of collagen 3D scaffolds with human skin cells

The development of stem cell technology in combination with advances in biomaterials has opened new ways of producing engineered tissue substitutes. In this study, we investigated whether the therapeutic potential of an acellular porous scaffold made of type I collagen can be improved by the addition of a powerful trophic agent in the form of mesenchymal stromal cells conditioned medium (MSC‐CM) in order to be used as an acellular scaffold for skin wound healing treatment. Our experiments showed that MSC‐CM sustained the adherence of keratinocytes and fibroblasts as well as the proliferation of keratinocytes. Moreover, MSC‐CM had chemoattractant properties for keratinocytes and endothelial cells, attributable to the content of trophic and pro‐angiogenic factors. Also, for the dermal fibroblasts cultured on collagen scaffold in the presence of MSC‐CM versus serum control, the ratio between collagen III and I mRNAs increased by 2‐fold. Furthermore, the gene expression for α‐smooth muscle actin, tissue inhibitor of metalloproteinase‐1 and 2 and matrix metalloproteinase‐14 was significantly increased by approximately 2‐fold. In conclusion, factors existing in MSC‐CM improve the colonization of collagen 3D scaffolds, by sustaining the adherence and proliferation of keratinocytes and by inducing a pro‐healing phenotype in fibroblasts.     

Organ engineering based on decellularized matrix scaffolds

End-organ failure is one of the major healthcare challenges in the Western world. Yet, donor organ shortage and the need for immunosuppression limit the impact of transplantation. The regeneration of whole organs could theoretically overcome these hurdles. Early milestones have been met by combining stem and progenitor cells with increasingly complex scaffold materials and culture conditions. Because the native extracellular matrix (ECM) guides organ development, repair and physiologic regeneration, it provides a promising alternative to synthetic scaffolds and a foundation for regenerative efforts. Perfusion decellularization is a novel technology that generates native ECM scaffolds with intact 3D anatomical architecture and vasculature. This review summarizes achievements to date and discusses the role of native ECM scaffolds in organ regeneration.     

The influence of fibrous elastomer structure and porosity on matrix organization

Fibrous scaffolds are finding wide use in the field of tissue engineering, as they can be designed to mimic many native tissue properties and structures (e.g., cardiac tissue, meniscus). The influence of fiber alignment and scaffold architecture on cellular interactions and matrix organization was the focus of this study. Three scaffolds were fabricated from the photocrosslinkable elastomer poly(glycerol sebacate) (PGS), with changes in fiber alignment (non-aligned (NA) versus aligned (AL)) and the introduction of a PEO sacrificial polymer population to the AL scaffold (composite (CO)). PEO removal led to an increase in scaffold porosity and maintenance of scaffold anisotropy, as evident through visualization, mechanical testing, and mass loss studies. Hydrated scaffolds possessed moduli that ranged between ～3-240 kPa, failing within the range of properties (<300 kPa) appropriate for soft tissue engineering. CO scaffolds were completely degraded as early as 16 days, whereas NA and AL scaffolds had ～90% mass loss after 21 days when monitored in vitro. Neonatal cardiomyocytes, used as a representative cell type, that were seeded onto the scaffolds maintained their viability and aligned along the surface of the AL and CO fibers. When implanted subcutaneously in rats, a model that is commonly used to investigate in vivo tissue responses to biomaterials, CO scaffolds were completely integrated at 2 weeks, whereas ～13% and ～16% of the NA and AL scaffolds, respectively remained acellular. However, all scaffolds were completely populated with cells at 4 weeks post-implantation. Polarized light microscopy was used to evaluate the collagen elaboration and orientation within the scaffold. An increase in the amount of collagen was observed for CO scaffolds and enhanced alignment of the nascent collagen was observed for AL and CO scaffolds compared to NA scaffolds. Thus, these results indicate that the scaffold architecture and porosity are important considerations in controlling tissue formation.     

A novel method for constructing an acellular 3D biomatrix from bovine spinal cord for neural tissue engineering applications

In this study, we aimed at generating 3-dimensional (3D) decellularized bovine spinal cord extracellular matrix-based scaffolds (3D-dCBS) for neural tissue engineering applications. Within this scope, bovine spinal cord tissue pieces were homogenized in 0.1 M NaOH and this viscous mixture was molded to attain 3D bioscaffolds. After resultant bioscaffolds were chemically crosslinked, the decellularization process was conducted with detergent, buffer, and enzyme solutions. Nuclear remnants in the native tissue and 3D-dCBS were determined with DNA content analysis and agarose gel electrophoresis. Afterward, 3D-dCBS were biochemically characterized in depth via glycosaminoglycan (GAG) content, hydroxyproline (HYP) assay, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Cellular survival of human adipose-derived mesenchymal stem cells (hAMSCs) on the 3D-dCBS for 3rd, 7th, and 10th days was assessed via MTT assay. Scaffold and cell/scaffold constructs were also evaluated with scanning electron microscopy and histochemical studies. DNA contents for native and 3D-dCBS were respectively found to be 520.76 ± 18.11 and 28.80 ± 0.20 ng/mg dry weight (n = 3), indicating a successful decellularization process. GAG content, HYP assay, and SDS-PAGE results proved that the extracellular matrix was substantially preserved during the decellularization process. In conclusion, it is believed that the novel decellularization method may allow fabricating 3D bioscaffolds with desired geometry from soft nervous system tissues.     

Immunogenicity of Intensively Decellularized Equine Carotid Arteries Is Conferred by the Extracellular Matrix Protein Collagen Type VI

The limited biocompatibility of decellularized scaffolds is an ongoing challenge in tissue engineering. Here, we demonstrate the residual immunogenicity of an extensively decellularized equine carotid artery (dEAC_intens) and identify the involved immunogenic components. EAC were submitted to an elaborated intensified decellularization protocol with SDS/sodium desoxycholate for 72 h using increased processing volumes (dEAC_intens), and compared to dEAC_ord prepared by an ordinary protocol (40 h, normal volumes). Matrix integrity was checked via correlative volumetric visualization which revealed only minor structural changes in the arterial wall. In dEAC_intens, a substantial depletion of cellular components was obvious for smooth muscle actin (100%), MHC I complexes (97.8%), alphaGal epitops (98.4% and 91.3%) and for DNA (final concentration of 0.34±0.16 ng/mg tissue). However, dEAC_intens still evoked antibody formation in mice after immunization with dEAC_intens extracts, although to a lower extent than dEAC_ord. Mouse plasma antibodies recognized a 140 kDa band which was revealed to contain collagen VI alpha1 and alpha2 chains via mass spectrometry of both 2D electrophoretically separated and immunoprecipitated proteins. Thus, even the complete removal of cellular proteins did not yield non-immunogenic dEAC as the extracellular matrix still conferred immunogenicity by collagen VI. However, as lower antibody levels were achieved by the intensified decellularization protocol, this seems to be a promising basis for further development.