Uptake of protoplasts from the filamentous fungiAspergillus nidulans andFusarium oxysporum into protoplasts from celery (Apium graveolens L.)

Summary Protoplasts isolated from celery cell suspension cultures, were mixed with fungal protoplasts, from either the saprophytic speciesAspergillus nidulans or the pathogenic speciesFusarium oxysporum. The incubation of protoplast mixtures with PEG caused close adhesion between plant and fungal protoplasts. Subsequent dilution of PEG resulted in the uptake of protoplasts from either fungal species into the plant protoplast cytoplasm. A range of PEG concentrations, incubation times and dilution rates were tested to maximise adhesion and uptake frequencies. Identification of uptake was achieved either by fluorescent staining of nuclei or by electron-microscopy. A maximum of 10% celery protoplasts had taken upA. nidulans protoplasts after PEG treatment. Fungal protoplasts were taken up into celery protoplast cytoplasm by endocytosis, and were maintained within vesicles; two bounding membranes were observed by electron microscopy. Plant protoplast viability was determined during prolonged incubation following fungal protoplast uptake. The presence ofA. nidulans protoplasts tended to maintain celery protoplast viability and although some morphological disintegration occurred intact celery protoplasts remained for at least 92 h after uptake. The uptake ofF. oxysporum protoplasts markedly depressed celery protoplast viability after 24 h incubation and greater celery protoplast disintegration occurred.Abbreviations PEG Polyethylene glycol - DAPI 4,6-diaminido-2-phenylindole - 2,4-D 2,4-dichlorophenoxyacetic acid     

Comparative effects of fusion facilitators on electrofusion attributes of N. tabacum mesophyll protoplasts

Mesophyll protoplasts isolated from in vitro-grown Nicotiana tabacum L. shoots were subjected to electrofusion.Dielectrophoresis was induced by an AC field of 50 V cm^-1 inter-electrode distance and 0.5 MHz oscillation frequency. Fusion was effected by two 0.7 kV cm^-1 DC pulses, each of 50 s duration, applied within one second of each other. Various chemical treatments were tested for their effects on dielectrophoresis efficiencies (percentages of protoplasts that made contact with at least one other protoplast under the AC field), fusion efficiencies (percentages of protoplasts participating in fusion events), cell lysis (percentages of protoplasts bursting during the electrofusion processes), overall viabilities of fusion products 24 h post-fusion and overall plating efficiencies 7 d post-fusion (percentages of fusion-derived cells that had undergone division). The various attributes assessed on the electrofusion of protoplasts in the control treatment, 10% mannitol, differed considerably for experiments carried out on different days. Relative to the control treatment, only the Ca²⁺ treatments, and to a lesser extent lipase treatment reduced dielectrophoresis efficiencies. Polyamines, cytochalasins and Ca²⁺ treatments significantly reduced cell lysis percentages. All electrofusion facilitators tested (except for spermine at 150 mg l^-1, the cytochalasins B and D, and Ca²⁺ treatments) increased fusion efficiencies to more than 1.5 times those obtained with the standard 10% mannitol electrofusion medium. Ca²⁺ treatments increased overall viabilities of fusion products by more than 1.5 times. With the exception of the prostaglandins, lecithin and CaCl₂ treatments, overall plating efficiencies were reduced by treatment of protoplasts with fusion facilitators. Substantial increases in overall plating efficiencies over those observed in the control treatment were obtained using prostaglandin F_2a, lecithin and CaCl₂.2H₂O treatments. The implications of the results are discussed.Abbreviations AC alternating current, approx.-approximately - BA benzylaminopurine, cv.-cultivar - DC direct current, diam.-diameter - FDA fluorescein diacetate - MS Murashige & Skoog (1962) - NAA napthaleneacetic acid - PCM protoplast culture medium - PIM protoplast isolation medium - PPM protoplast purification medium - rpm revolutions per minute - SD(n) standard deviation of a variate - SEM standard error of the mean     

Factors affecting the electrofusion efficiency ofPorphyra protoplasts

The effects of various factors on the electrofusion efficiencies ofPorphyra protoplasts were investigated. These factors were protoplast stabilizing reagents, divalent cations, membrane digestive enzymes and cold storage of the protoplasts. Fusion efficiencies were dependent on the concentrations of reagents used to adjust the osmotic pressure of the medium. With mannitol or sorbitol the maximum fusion efficiency (approximately 16%) was observed at concentrations of 0.6 to 0.7 M; glucose was less effective. Brief treatment of the protoplasts with pronase stimulated electrofusion, whereas treatment with proteinase K, trypsin, phospholipase C or lipase repressed fusion. The addition of Ca²⁺ at 10^-5 to 10^-4 M in the protoplast medium enhanced the fusion efficiency to approximately four times that of the non-treated control. Sr²⁺ and Co²⁺ also stimulated electrofusion, but less effectively than Ca²⁺. The fusion capacity of the protoplasts remained stable for about 3 h when kept on ice, but decreased gradually when left at room temperate.     

Microcallus formation from maize protoplasts prepared from embryogenic callus

Conditions have been developed that induce maize (Zea mays L.) protoplasts to re-synthesize cell walls and to initiate cell divisions. Two types of embryogenic maize callus were used as a source of protoplasts: a heterogeneous callus (Type I) derived from immature embryos after three weeks in culture, and a friable, rapidly growing callus (Type II) selected from portions of the Type I callus. Many variables in the growth conditions of the donor tissue (type of medium, transfer schedule, age of callus), protoplast isolation solutions (pH, osmolarity, type and concentration of cell wall hydrolyzing enzymes, addition of polyamines) and conditions (amount of time in enzyme, amount of tissue per volume of enzyme incubation medium, agitation, preplasmolysis of source tissue, type of callus), and purification procedures (filtration and-or flotation), were found to affect both yield and viability of protoplasts (based upon fluorescein-diacetate staining). Our isolation procedure yielded high numbers of viable, uninucleated maize callus protoplasts which were densely cytoplasmic and varied in size from 20 to 50 m in diameter. Protoplasts plated in solid medium formed walls and divided several times. Of several gelling agents tested for protoplast propagation, only agarose resulted in protoplasts capable of sustained divisions leading to the formation of microcalli. Plating efficiency was established over a wide range of protoplast densities (10³–10⁷ protoplasts/ml). Highest plating efficiency (25%) was obtained at 1·10⁶ protoplasts/ml). The resulting microcalli grew to be dense clusters of about 0.1–0.5 mm in diameter and then stopped growing. Nurse cultures of maize and carrot (Daucus carota L.), were used to establish that individual protoplasts (not contaminating cells or cell clusters) formed walls and divided. Nurse cultures also increased the efficiency of microcallus formation from protoplasts.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - MS Murashige and Skoog (1962) salts - MS 1D Murashige and Skoog salts with 1 mg/l 2,4-D - MS 2D Murashige and Skoog salts with 2 mg/l 2,4-D - N₆ medium of Chu et al. (1975) - NN67-mod medium of Nitsch and Nitsch (1967) as modified in the present paper - FDA fluorescein diacetate - LMP low melting point     

Abscisic-acid contents and concentrations in protoplasts from guard cells and mesophyll cells ofVicia faba L.

The abscisic-acid (ABA) contents of isolated guard-cell protoplasts and mesophyll-cell protoplasts fromVicia faba were determined by high-pressure liquid chromatography followed by gas chromatography. The amounts of ABA found immediately after preparation of the protoplasts varied from 90 to 570 amol per guard-cell protoplast, and from 75 to 100 amol per mesophyll-cell protoplast. These contents correspond to concentrations between 36 and 230 mol per liter in guard-cell protoplasts and between 2.7 and 3.3 mol per liter in mesophyll-cell protoplasts. During exposure of protoplasts to betaine concentrations of 0.3, 0.5, and 0.8 mol·l^-1 at 0° and 20°C for 30 min, ABA contents as well as the fractions of ABA that leaked into the medium remained constant for both protoplast types. There was no evidence for net production of ABA in isolated protoplasts subjected to osmotic stress.Abbreviation ABA abscisic acid     

Electrical fusion for optimal formation of protoplast heterokaryons in Nicotiana

The electrical fusion of protoplasts has been studied in order to maximize the formation of heterokaryons for culture. Heterokaryons of Nicotiana tabacum L. mesophyll protoplasts and N. plumbaginifolia Viviani supension-cell protoplasts were identified in fixed and stained as well as living material; a quantitative fusion index was thereby developed. With this index the efficiencies of various electric fields and fusion-chamber designs have been determined. Optimal fusion was obtained with an alternating-current (AC) field of 150 V/cm and direct-current (DC) square-wave pulses of 1000 V/cm. A new, simple-to-use, largescale fusion chamber is described in which batches of up to 5·10⁵ protoplasts (0.5 ml of cells at 10⁶/ml) can be fused in 5–7 min with efficiencies approaching 40%. Half of the fusion products are heterokaryons, thus fusion is random. Of the fusion products, 60% are bi- or trinucleate. Using fusion procedures similar to those described here Bates and C. Hasenkampf (1985, Theor. Appl. Genet., in press) have recovered viable somatic hybrids which have been regenerated.Abbreviations AC alternating current - DC direct current - PEG polyethylene glycol     

Fusion characteristics of plant protoplasts in electric fields

The electrical parameters important in the fusion of plant protoplasts aligned dielectrophoretically in high-frequency alternating electric fields have been established. Protoplasts were aligned in an alternating electric field between two relatively distant (1 mm) electrodes, by dielectrophoresis induced by field inhomogeneities caused by the protoplasts themselves. This arrangement allowed ease of manipulations, large throughput and low loss of protoplasts. In analytical experiments, sufficiently large samples could be used to study pulse duration-fusion response relations at different pulse voltages for protoplasts of different species, tissues and size (mesophyll protoplasts of Solanum brevidens, Triticum aestivum, Hordeum vulgare; suspension-culture protoplasts of Nicotiana sylvestris, N. rustica, Datura innoxia and S. brevidens; root-tip protoplasts of Vicia faba, hypocotyl protoplasts of Brassica napus). The percentage of aligned protoplasts that fused increased with increasing pulse parameters (pulse duration; voltage) above a threshold that was dependant on pulse voltage. The maximum fusion values obtained depended on a number of factors including protoplast origin, size and chain length. Leaf mesophyll protoplasts fused much more readily than suspension-culture protoplasts. For both types, there was a correlation of size with fusion yield: large protoplasts tended to fuse more readily than small protoplasts. In short chains (five protoplasts), fusion frequency was lower, but the proportion of one-to-one products was greater than in long chains (ten protoplasts). In formation by electrofusion of heterokaryons between mesophyll and suspension-culture protoplasts, the fusion-frequency response curves reflected those of homofusion of mesophyll protoplasts rather than suspension-culture protoplasts. There was no apparent limitation to the fusion of the smallest mesophyll protoplast with the largest suspension-culture protoplasts. Based on these observations, it is possible to direct fusion towards a higher frequency of one-to-one (mesophyll/suspension) products by incorporating low densities of mesophyll protoplasts in high densities of suspensionculture protoplasts and by using a short fusion pulse. The viability of fusion products, assessed by staining with fluorescein diacetate, was not impaired by standard fusion conditions. On a preparative scale, heterokaryons (S. brevidens mesophyll-N. sylvestris or D. innoxia suspension-culture) were produced by electrofusion and cultured in liquid or embedded in agar, and were capable of wall formation, division and growth. It is concluded that the electrode arrangement described is more suitable for carrying out directed fusions of plant protoplasts than that employing closer electrodes.     

Behavior and viability of tobacco protoplasts in response to electrofusion parameters

This investigation examines responses of protoplasts in a systematic and quantitative way to the various electrical treatments used to achieve electrofusion and their individual and cumulative effect on protoplast viability. Mesophyll and cell suspension protoplasts from two species of the same genera, Nicotiana tabacum and N. rustica var brasilia were used in these experiments. Optimal frequencies for alignment of tobacco protoplasts were between 500 kilohertz and 2 megahertz at 100 volts per centimeter. Variations in frequency and voltage of the alternating current (AC) field caused predictable movements of protoplasts within an electrofusion chamber. AC frequencies below 10 hertz or above 5 megahertz significantly decreased the viability of protoplasts in the fusion chamber as estimated by fluorescein diacetate staining 1 hour after treatment. Although the direct current (DC) pulse appeared to have a slight detrimental effect on protoplast viability, this effect was not significantly different from untreated control preparations.

Protoplasts from both leaf mesophyll cells and suspension cells were induced to fuse with one or more 10 to 30 microseconds DC square wave pulses of approximately 1 kilovolt per centimeter after the protoplasts had been closely appressed with an AC field.

     

Heterokaryon formation in the basidiomycete Schizophyllum commune by electrofusion of protoplasts

Summary Conditions for high frequency electrofusion of protoplasts from the basidiomycete Schizophyllum commune are described. Visual inspection revealed up to 30% of the protoplasts engaged in fusion. Using complementing nutritional mutations, nearly 7% of the regenerated protoplasts could be recovered as heterokaryotic mycelia. The method is probably equally applicable to other basidiomycetes such as Agaricus bisporus, permitting the recovery of fusion products in the absence of selection markers.     

Liposome-Mediated transfer of bacterial RNA into carrot protoplasts

The uptake of liposome-encapsulated E. coli [³H]RNA by carrot (Daucus carota L.) protoplasts was examined. [³H]RNA extracted from protoplasts that had been incubated with [³H]RNA-containing, large, unilamellar lipid vesicles (liposomes) obtained by ether infusion, and examined by sucrose gradient centrifugation and formamide-polyacrylamide gel electrophoresis, appeared substantially degraded, with a total elimination of 23S RNA and a partial loss of 16S RNA. In contrast, no breakdown of the [³H]RNA was apparent in the liposomes after sequestration, even in the presence of externally added ribonuclease, or in the unfused liposomes remaining after incubation of protoplasts with liposomes. Thus, the degradation of the [³H]RNA extracted from the protoplasts must have occurred within the protoplasts and represents evidence for liposome-mediated RNA uptake. Naked RNA added to the protoplast culture was found to be totally degraded after incubation with the protoplasts. The uptake of liposome-sequestered RNA by protoplasts was demonstrated to be a function both of the lipid composition of the liposomal membrane and of the temperature of incubation of the liposomeprotoplast mixture. Furthermore, the mode of this uptake (fusion versus endocytosis) could be manipulated by adjusting the cholesterol content of the liposomal membrane. The implications of the ability to insert RNA into protoplasts without degradation by extracellular nucleases are discussed.     

Electrofusion of giant protoplasts of Pleurotus cornucopiae

Summary Giant protoplasts of Pleurotus cornucopiae were fused, using the glass microelectrode electrofusion technque; the percentage fusion achieved was 70%. To induce fusion, Ca²⁺ was necessary, a 10 mM concentration giving the best result. Polyethylene glycol 4000 (PEG) promoted fusion but also increased the adhesion of protoplasts, which caused them to be irreversibly attached to the electrodes. Fusion was always completed within 1 min after a single electrical pulse had been applied. The fused protoplast was isolated with a glass micropipette and was found to regenerate into a colony.     

Transfer of defined numbers of chloroplasts into albino protoplasts using an improved subprotoplast/protoplast microfusion procedure: Transfer of only two chloroplasts leads to variegated progeny

Summary A procedure is described by which it is possible to perform controlled microfusion of microscopically selected protoplast fusion partners with high efficiencies. The procedure is applied to fusion of Nicotiana tabacum (line 92V37, N. undulata cytoplasm) plastid albino protoplasts as a recipient and spontaneously formed subprotoplasts of green N. tabacum (line SRI) as donor. Products of individual electrofusion events are cloned via single cell nurse culture and the derived cell lines are analysed for the occurrence of variegated or green regenerating shoots, which are indicative of the establishment of the transferred organelles in the cell progeny. The plastid population in green regenerants recovered after the transfer of only two chloroplasts was demonstrated to have originated from the donor subprotoplast organelles by restriction analysis of total DNA using a plastome-specific probe.Some of the results described in this paper have been presented as posters at scientific meetings (Eigel and Koop 1989b; Eigel and Koop 1990)     

Cell wall regeneration and galactomannan biosynthesis in protoplasts from carob

Protoplast isolation from endosperms of developing carob (Ceratonia siliqua L.) seeds is reported for the first time. These protoplasts regenerated cell walls within 12 h. In order to assess their potential for galactomannan biosynthesis, the incorporation of radioactivity in the regenerated cell wall polysaccharides (CWP) and extracellular polysaccharides (ECP), after feeding these protoplasts with D-[U-¹⁴C]glucose or D-[U-¹⁴C]mannose was studied. The pattern of the radioactive label distribution in the neutral sugars of the trifluoroacetic acid (TFA) hydrolysate of CWP was different from that of the ECP. In the TFA hydrolysis products of the CWP, immediately after protoplast isolation, the greatest level of radioactivity (approximately 90%) was detected in glucose, galactose and mannose. After 2 days protoplast culture, the label in mannose increased. In contrast, immediately after protoplast isolation, approximately 90% of radioactivity of the ECP was detected in galactose and mannose. However, during culture, the radioactivity incorporation in mannose dropped to one third, while that in galactose and arabinose increased significantly. Hydrolysis of the CWP and ECP with -galactosidase and endo--mannanase confirmed that, at least part of mannose and galactose belonged to galactomannan molecules. These results were compared with those obtained upon feeding developing endosperm tissue with D-[U-¹⁴C]mannose. From our results we concluded that protoplasts from endosperm tissues of developing carob seeds, retained the ability of their original explant to synthesize galactomannan, making protoplasts candidates for the study of galactomannan biosynthesis.     

Fusion of plant protoplasts: a study using auxotrophic mutants of Nicotiana plumbaginifolia,Viviani

Summary Protoplast fusion studies between various auxotrophic mutants of Nicotiana plumbaginifolia were performed to optimize conditions for PEG-mediated fusion and to identify factors influencing the plant protoplast fusion process. Numerous parameters in the isolation, culture, and fusion of protoplasts were tested, and established fusion protocols were compared. Fusion rates, calculated on the basis of colony growth on selection medium (genetic complementation), ranged from 10^–4 to 10^–2. Conditions that allow rapid and reproducible fusions at the highest rates were established. Particular emphasis was given to fusion of mesophyll-derived protoplasts, for which the ability to regenerate fertile plants from fusion products was shown to be particularly high. Preliminary experiments using electric-field mediated fusion suggest that electrofusion may offer significant advantages over the traditional chemical fusion.     

Optimization of formation and regeneration of protoplasts from biocontrol agents ofTrichoderma species

The optimal conditions necessary for a large yield and a high frequency of regeneration of protoplasts isolated from the biocontrol agentsTrichoderma koningii andT. harzianum were investigated. Protoplast yields were 1.2×10⁸/ml fromT. koningii and 6×10⁷/ml fromT. harzianum when 20-h mycelial culture was treated with a lytic enzyme solution containing Novozym 234 (15 mg/ml), sucrose (0.6 M) and citrate phosphate buffer (0.02 M), pH 5.6 at 31°C. When the protoplasts were grown in the regeneration medium containing yeast extract (1.5%), 1 I of Mandel's salts, pH 5.6, and glucose (0.8 M), a high frequency of regeneration of the protoplast was obseved: 66% forT. koningii and 45% forT. harzianum. Two patterns of regeneration were observed. First, the hyphae arose directly from the regenerated protoplast mother cell. Second, a chain of bud cells developed from the protoplast and subsequently generating hyphae generally protruded from the terminal bud cells.     

Plant regeneration from protoplasts of Enteromorpha intestinalis (Chlorophyta, Ulvophyceae) as seedstock for macroagal culture

A continuous micropropagation was established from protoplasts of thegreen alga Enteromorpha intestinalis. The effects of two differentcrude enzymes and the osmolarity at different concentrations of the enzymesolution on algal protoplast yields were tested. The optimal enzymecomposition for cell wall digestion and protoplast viability was 2%cellulase R 10 Onozuka and 2% Aplysie with 0.5 m mannitol. Largenumbers of Enteromorpha protoplasts were released (10.0 × 10⁶protoplasts from 1 g fresh thalli) and settled on a rangeof substrata. Regeneration of the protoplasts followed the normal patternfor this species. Conditions for pure cultures and efficient systems offloating supports with nets were determined to optimise the product qualityof plantlets of Enteromorpha. A promising storage process has beendeveloped which involves including protoplasts in beads of alginic acid gel.Plants regenerated from protoplasts may also be used as seedstock tofacilitate propagation for macroalgal culture.     

Intergeneric fusion of Zygnemataceae protoplasts

In intergeneric fusion fromMougeotia andZygnema protoplasts, the fate of fusion products, as well as nuclei and chloroplasts, could be classified according to the number of protoplasts involved from the two algae. Stable elongation growth occurred only in products of groups involving one protoplast from one alga and several protoplasts from the other alga. The features of the elongating products were those of the alga more numerously represented. The different nuclei combined by fusion failed to co-exist. In the groups involving one protoplast from one alga and several from the other, the nucleus from the former degenerated in an early period and only the nuclei from the latter were maintained. Also, the different chloroplasts combined did not co-exist. The genus of the chloroplasts maintained coincided with that of the nuclei maintained. The chloroplasts from the other genus degenerated gradually. An early morphological change in the degenerating chloroplasts was seen in the quantity of starch grains. Later, the chloroplasts generally became rounded, In degeneratingZygnema chloroplasts, thylakoid stacking was prominent. Without collapse of the thylakoid or accumulation of plastoglobules, the degenerating chlorplasts showed rupture of the chloroplast envelope.     

Improved isolation of dihaploidsolanum tubersoum protoplasts and the production of somatic hybrids between dihaploidS. tuberosum andS. brevidens

Summary A modified protoplast isolation technique, applicable to a range of dihaploidSolanum tuberosum genotypes, has been developed. A combination of high calcium and high pH was used to fuse mesophyl protoplasts of dihaploidS. tuberosum (PDH40) and the diploid wild speciesS. brevidens. Large numbers of colonies were obtained after fusion and putative hybrids selected on the basis of phenotype from regenerated shoots. From these, 11 somatic hybrid plants have been identified by their isoenzyme patterns and morphologic characteristics. Four of these hybrids had the expected chromosome number of 48. The approach of mass culture after fusion followed by selection of hybrids from regenerated shoots and the application of somatic hybridization to potato breeding are discussed.     

Induction of fast-growing and morphologically different strains through intergeneric protoplast fusions of Ulva and Enteromorpha (Ulvales,Chlorophyta)

Isolated protoplasts of Ulva pertusa and Enteromorpha prolifera were electrically fused. Treatment of protoplasts in 1% protease for 15–20 min prior to fusion enhanced fusion ability. Protoplasts from each fusion partner were mixed together in 1:1 ratio in low conductivity electrofusion solution at a density of 1 × 10⁵ cells ml⁻¹ before subjecting them to electrofusion. The protoplasts were aligned in AC field (1MHz, 25 V for 10–15 s) and subsequently fused by a high intensity single DC pulse of 250 V for 25 μs duration. Fusion buffer supplemented with 1 mM calcium and 1 mM magnesium yielded optimum fusion frequencies (about 18–24%). Entrapment of fusion treated cells inside agarose/agar plate facilitated marking and regeneration of fusion products. The regeneration patterns of fused protoplasts were similar to normal (unfused) protoplast development. Most of the regenerated plants from fusion products had a thallus similar to either U. pertusa type or E. prolifera type. Although some of the plants of the former were morphologically similar to U. pertusa, but most had a higher growth rate (1.9 to 1.5 times) than U. pertusa. Furthermore the thallus of some plants had a characteristic irregular and dentate margin, which was never observed in the parental type.     

Plant regeneration from the protoplasts of Solanum tuberosum, S. nigrum and S. bulbocastanum

The mesophyll protoplasts were isolated from the Solanum tuberosum (S. tbr) clones of different ploidy level (4x Bzura cv., 2x H-8105, and 2x ZEL-1136) as well as from the wild species: S. bulbocastanum (S. blb, 2x) and two accessions of S. nigrum (S. ngr, 6x). Additionally, the protoplasts were isolated from the cell suspensions of Bzura cv. and H-8105 clone. The conditions of protoplast isolation as well as the media for their culturing and regeneration, were selected and optimized for the studied genotypes. For mesophyll protoplasts, the shooting calli were produced by all the cultured protoclones except that of S. bulbocastanum. The shoots excised from the protoplast-derived calli developed into whole plants in all the studied potato clones but only in one accession of S. nigrum, i.e. S. ngr var. gigantea. As for suspension-cell-derived protoplasts, only H-8105 clone produced the regenerative type of calli, though normal shoots could not be obtained. The regenerative capacity of the protoplasts isolated from leaves and cell suspensions is compared and discussed. We regret to report the death of M. Sc. Maria Borkowska after the completion of this work.