Reaction of [MCl2(CH3CN)2] (M = Pd(II), Pt(II)) compounds with N1-alkylpyridylpyrazole-derived ligands

Palladium(II) and platinum(II) complexes with N-alkylpyridylpyrazole-derived ligands, 2-(1-ethyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L¹) and 2-(1-octyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L²), cis-[MCl₂(L)] (M = Pd(II), Pt(II)), have been synthesised. Treatment of [PdCl₂(L)] (L = L¹, L²) with excess of ligand (L¹, L²), pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ and NaBPh₄ produced the following complexes: [Pd(L)₂](BPh₄)₂, [Pd(L)(py)₂](BPh₄)₂ and [Pd(L)(PPh₃)₂](BPh₄)₂. All complexes have been characterised by elemental analyses, conductivity, IR and NMR spectroscopies. The crystal structures of cis-[PdCl₂(L²)] (2) and cis-[PtCl₂(L¹)] (3) were determined by a single crystal X-ray diffraction method. In both complexes, the metal atom is coordinated by one pyrazole nitrogen, one pyridine nitrogen and two chlorine atoms in a distorted square-planar geometry. In complex 3, π-π stacking between pairs of molecules is observed.     

Synthesis and characterization of isopropylamine complexes of lanthanide(II) diiodides: Molecular structure of TmI2(PrNH2)4 and EuI2(PrNH2)4

It was found that the lanthanide diiodides LnI₂ (1) (Ln = Nd, Sm, Eu, Dy, Tm, Yb) are dissolved in isopropylamine (IPA) without redox transformations. Stability of the formed solutions decreases in a row Eu ≈ Yb > Sm > Tm > Dy > Nd. Removing of a solvent in vacuum leaves complexes LnI₂(IPA)_x (2) (Nd, x = 5; Sm, Eu, Dy, Tm, Yb, x = 4) as crystalline colored solids. Stability of 2-Nd,Dy,Tm is higher than that of known THF or DME coordinated salts. Divalent state of metal in the products is confirmed by data of UV-Vis spectroscopy, magnetic measurements and their chemical behavior. Structure of 2-Eu and 2-Tm was established by X-ray diffraction analysis. Oxidation of 2-Nd,Dy in IPA affords amine-amides (PrⁱNH)Ln(IPA)_y (3) (Nd, y = 4; Dy, x = 3). n-Propylamine also dissolves the iodides 1-Sm,Eu,Dy,Tm,Yb but stability of the solutions is significantly lower. 1-Nd vigorously reacts with PrⁿNH₂ even at −30 °C which hampers the formation of the solution.     

Half-sandwich ruthenium thiocarbonate complexes: Structures of CpRu(PPh3)2SCO2Bu, CpRu(dppe)SCO2Bu and CpRu(PPh3)(CO)SCO2Bu

Thiocarbonate ruthenium complexes of the form CpRu(L)(L′)SCO₂R (L = L′ = PPh₃ (1), 1/2 dppe (2), L = PPh₃, L′ = CO (3); R = Et (a), Buⁿ (b), C₆H₅ (c), 4-C₆H₄NO₂ (d)) have been synthesized by the reaction of the corresponding sulfhydryl complexes, CpRu(L)(L′)SH, with chloroformates, ROCOCl, at low temperature. The bis(triphenylphosphine) complexes 1 can be converted to 3 under CO atmosphere. The crystal structures of CpRu(PPh₃)₂SCO₂Buⁿ (1b), CpRu(dppe)SCO₂Buⁿ (2b), and CpRu(PPh₃)(CO)SCO₂Buⁿ (3b) are reported.     

O-Alkylthio- and O-alkylselenooxalate iron complexes: Structures of CpFe(CO)2ECOCO2Me and [CpFe(CO)2ECO]2

When the iron sulfide complexes (μ-S_x)[CpFe(CO)₂]₂ (x = 2, 3) are treated with O-alkyl oxalyl chlorides ROCOCOCl the complexes CpFe(CO)₂SCOCO₂R (1) [R = Me (a), Et (b)] are obtained. Similarly, the complexes CpFe(CO)₂SeCOCO₂R (2) are obtained from the analogous iron selenide (μ-Se)[CpFe(CO)₂]₂ reaction with the same reagents. Treatment of the iron selenide with half equivalent of oxalyl chloride produces the dimeric complex [CpFe(CO)₂SeCO]₂ (3). The new complexes, 1, 2 and 3, have been characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of 1a, 2a, 3 and [CpFe(CO)₂SCO]₂ (4) were determined by an X-ray crystal structure analysis.     

Organopalladium(IV) and platinum(IV) complexes containing the bis(pyrazol-1-yl)borate ligand. Structures of PtMe3{(pz)2BH2}(py) (py=pyridine) and Pt(mq)Me2{(pz)2BH2} (mq=8-methylquinolinyl) and detection of a neutral organopalladium(IV) phosphine complex

Neutral palladium(IV) complexes containing the bis(pyrazol-1-yl)borate ligand, PdMe₃{(pz)₂BH₂}(L) [L=py-d₅ (4), PMe₂Ph (6)], are generated in solution by oxidative addition of iodomethane to [PdMe₂{(pz)₂BH₂}]⁻ at −70 °C followed by addition of L; the Pd(IV) complexes reductively eliminate ethane above 0 °C. Stable Pt(IV) analogues of 4 and 6 have been isolated, and comparison of NMR spectra for Pd(IV) and Pt(IV) species support structural assignments for the unstable Pd(IV) complexes. The complex PtMe₃{(pz)₂BH₂}(py) (1a) has been characterised by X-ray diffraction, together with Pt(mq)Me₂{(pz)₂BH₂} (2) (mq=8-methylquinolinyl); both complexes show a fac-PtC₃ configuration for Pt(IV), and for 2 the PtN distances are ∼0.03 Å shorter than in the isostructural Pd(IV) complex.     

DNA cleavage activity of VO(acac)2 and derivatives

The DNA cleavage activity of several β-diketonate vanadyl complexes is examined. Vanadyl acetylacetonate, V^IVO(acac)₂, 1, shows a remarkable activity in degrading plasmid DNA in the absence of any activating agents, air and photoirradiation. The cleaving activity of several related complexes V^IVO(hd)₂ (2, Hhd = 3,5-heptanedione), V^IVO(acac-NH₂)₂ (3, Hacac-NH₂ = acetoacetamide) and V^IVO(acac-NMe₂)₂ (4, Hacac-NMe₂ = N,N-dimethylacetoacetamide) is also evaluated. It is shown that 2 exhibits an activity similar to 1, while 3 and 4 are much less efficient cleaving agents. The different activity of the complexes is related to their stability towards hydrolysis in aqueous solution, which follows the order 1∼2 ? 3∼4. The nature of the pH buffer was also found to be determinant in the nuclease activity of 1 and 2. In a phosphate buffered medium DNA cleavage by these agents is much more efficient than in tris, hepes, mes or mops buffers. The reaction seems to take place through a mixed mechanism, involving the formation of reactive oxygen species (ROS), namely OH radicals, and possibly also direct cleavage at phosphodiester linkages induced by the vanadium complexes.     

Rhenium(IV) cyanate complexes: Synthesis, crystal structures and magnetic properties of NBu4[ReBr4(OCN)(DMF)] and (NBu4)2[ReBr(OCN)2(NCO)3]

Two new rhenium(IV) mononuclear compounds of formula NBu₄[ReBr₄(OCN)(DMF)] (1) and (NBu₄)₂[ReBr(OCN)₂(NCO)₃] (2) (NBu₄ = tetrabutylammonium cation, OCN = O-bonded cyanate anion, NCO = N-bonded cyanate anion and DMF = N,N-dimethylformamide) have been synthesized and their crystal structures determined by single-crystal X-ray diffraction. 1 crystallizes in the monoclinic system with the space group P2₁/n, whereas 2 crystallizes in the triclinic one with as space group. In both complexes the rhenium atom is six-coordinated, in 1 by four Br atoms in the equatorial plane, and two trans-oxygen atoms, one of a DMF molecule and another one from a cyanato group, while in 2 by one bromide anion and five cyanate ligands, two of which are O-bonded and three N-bonded, forming a somewhat distorted octahedral surrounding. Magnetic susceptibility measurements on polycrystalline samples of 1 and 2 in the temperature range 1.9-300 K are interpreted in terms of magnetically isolated spin quartets with large values of the zero-field splitting (|2D| is ca. 41.6 and 39.2 cm⁻¹ for 1 and 2, respectively).     

1-D coordination chains of Cu(hfac)2 and Mn(hfac)2 bridged by phenyl-nitronylnitroxide derivatives

Two alternating 1-D metal-radical linear [L:Cu(hfac)₂]_n and zig-zag [L:Mn(hfac)₂]_n chains (where L = 4-trimethylsilylethynyl-1-(4,4,5,5-tetramethyl-3-oxylimidazoline-1-oxide)benzene) and hfac = hexafluoroacetylacetonate) are described and characterized by X-ray diffraction of their crystals. Bulk magnetic measurements of L:Cu(hfac)₂ indicated a ferromagnetic interaction with J = 6 cm⁻¹ and L:Mn(hfac)₂ yielded ferrimagnetic interactions with J = −95 cm⁻¹. For the latter, a strong increase of their magnetic moment at lowest temperatures was observed only at very low static magnetic field, while for H_dc > 0.05 T saturation effect led to a downward slope after reaching a maximum.     

Heterobimetallic Fe-Pd and Fe-Pt NCN pincer complexes (NCN = [C6H2(CH2NMe2)2-2,6])

The meta-diaminoaryl ferrocenes Fc-NCN-H (3) and Fc-CC-NCN-H (5) (Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe, NCN-H = C₆H₃(CH₂NMe₂)₂-3,5) can be used as precursors in the preparation of heterobimetallic transition metal complexes of structural type Fc-NCN-MX (NCN = [C₆H₂(CH₂NMe₂)₂-2,6]⁻; MX = PdCl (7), PtCl (8), PtI (9)) and Fc-CC-NCN-MX (MX = PdCl (11), PdI (12), PtCl (13)), respectively. They are accessible by applying different synthesis procedures, including oxidative addition and metallation-transmetallation processes.Cyclovoltammetric studies show that the ferrocene moieties in 3, 5, 7-9 and 11-13 can reversibly be oxidised. The potential of the Fe(II)/Fe(III) redox couple decreases with increasing electron density at the NCN pincer unit. The use of 8 as a possible (electro)chemical sensor in the detection of SO₂ is discussed as well.The solid-state structures of 8 and 13 are reported. The crystals of 8 contain two molecules of 8 in the asymmetric unit. The plane of the C₆H₂ moiety is with 27.2(3)° and 38.2(3)° tilted towards the C₅H₄ entity, while in 13 an angle of 45.9(3)° can be found. The d⁸-electron configured platinum atoms possess a somewhat distorted square-planar surrounding, setup by two Me₂NCH₂ortho-substituents, the NCN C_ipso carbon atom and the chloride ligand.     

Analysis of the main structural trends for biscyclometalated dinuclear rhodium compounds of general formula Rh2(O2CR)2(PC)2 · 2H2O

A new series of biscyclometalated dinuclear rhodium (II) compounds with the general formula Rh₂(O₂CR)₂(PC)₂ · 2H₂O, being PC = (C₆H₄)P(C₆H₅)₂, R = CH₃ (1 · 2H₂O), PC = [(p-CH₃ OC₆H₃)P(p-CH₃ OC₆H₄)₂], R = CF₃ (2 · 2H₂O), PC = (C₆H₄)P[CH(CH₃)₂]₂, R = CH₃ (3 · 2H₂O) and PC = (C₆H₄)P(C₆H₅)₂, R = C₆F₅ (4 · 2H₂O) has been obtained. The crystal structures for these compounds have been determined by X-ray diffraction and the main structural trends, bond lengths, bond angles and torsion angles have been analyzed, and have also been compared with the structural parameters for different analogous complexes described previously in the literature.     

Spectral properties and bio-activity of copper(II) clofibriates, part III: crystal structure of Cu(clofibriate)2(2-pyridylmethanol)2, Cu(clofibriate)2(4-pyridylmethanol)2(H2O) dihydrate, and Cu2(clofibriate)4(N,N-diethylnicotinamide)2

New copper(II) clofibriates (clof, {2-(4-chlorophenoxy)-2-methylpropionic or 2-(4-chlorophenoxy)isobutyric acid}) of composition Cu(clof)₂L₂ (where L=2-pyridylmethanol (2-pymeth) (1), N-methylnicotinamide (Menia) (4), N,N-diethylnicotinamide (Et₂nia) (5), isonicotinamide (isonia) (7) or methyl-3-pyridylcarbamate (mpc) (8)), [Cu(clof)₂(4-pymeth)₂(H₂O)] · 2H₂O (4-pymeth=4-pyridylmethanol) (2 · 2H₂O) and Cu(clof)₂L (where L=4-pymeth (3) or Et₂nia (6)) have been prepared and spectroscopically characterized. All the Cu(clof)₂L₂ compounds seem to possess distorted octahedral copper(II) stereochemistry with differing tetragonal distortions. An X-ray analysis of 1 was carried out and it featured a tetragonal-bipyramidal geometry around the copper(II) atom. X-ray analysis of 2 · 2H₂O featured a square-pyramidal geometry around copper(II) atom. Both the Cu(clof)₂L compounds seem to consist of a binuclear unit of tetracarboxylate type bridging. An X-ray analysis of 6 revealed typical binuclear paddle-wheel type structure, consisting of two copper(II) atoms in square-pyramidal geometry bridged by four carboxylate anions in the xy-plane. All complexes under study were characterized by EPR and electronic spectroscopy. The antimicrobial effects have been tested on various strains of bacteria, yeasts and filamentous fungi.     

Synthesis and structure of iron (III) and iron (II) complexes in S4P2 environment created by diethyldithiocarbamate and 1,2-bis(diphenylphosphino)ethane chelation: Investigation of the electronic structure of the complexes by Mössbauer and magnetic studies

Iron (II) and iron (III) complexes, [Fe^II(DEDTC)₂(dppe)] · CH₂Cl₂ (1), [Fe^II(ETXANT)₂(dppe)] (2) (DEDTC = diethyldithiocarbamate, ETXANT = ethyl xanthate, dppe = 1,2-bis (diphenylphosphino) ethane), and [Fe^III(DEDTC)₂(dppe)] [Fe^IIICl₄] (3) have been synthesized and characterized. Since 3 contains two magnetic centers, an anion metathesis reaction has been conducted to replace the tetrahedral FeCl₄⁻ by a non-magnetic BPh₄⁻ ion producing [Fe^III(DEDTC)₂(dppe)]BPh₄ (4) for the sake of unequivocal understanding of the magnetic behavior of the cation of 3. With the similar end in view, the well-known FeCl₄⁻ ion, the counter anion of 3, is trapped as PPh₄[Fe^IIICl₄] (5) and its magnetic property from 298 to 2 K has been studied. Besides the spectroscopic (IR, UV-Vis, NMR, EPR, Mass and XPS) characterization of the appropriate compounds, especially 2, others viz. 1, 3 and 4 have been structurally characterized by X-ray crystallography. While Fe^II complexes, 1 and 2, are diamagnetic, the Fe^III systems, namely the cations of 3, and 4 behave as low-spin (S = 1/2) paramagnetic species from 298 to 50 K. Below 50 K 3 shows gradual increase of χ_MT up to 2 K suggesting ferromagnetic behavior while 4 exhibits gradual decrease of magnetic moment from 60 to 2 K, indicating the occurrence of weak antiferromagnetic interaction. These conclusions are supported by the Mössbauer studies of 3 and 4. The Mössbauer pattern of 1 exhibits a doublet site for diamagnetic (2-400 K) Fe^II. The compounds 1, 2 and 4 encompass interesting cyclic voltammetric responses involving Fe^II, Fe^III and Fe^IV.     

Synthetic and mechanistic studies on ruthenium dicarbonyl complexes containing PhP(CH2CH2CH2PCy2)2 (Cyttp) ligand

A synthetic and mechanistic study is reported on ligand substitution and other reactions of six-coordinate ruthenium(II) carbonyl complexes containing tridentate PhP(CH₂CH₂CH₂PCy₂)₂ (Cyttp). Carbonylation of cis-mer-Ru(OSO₂CF₃)₂(CO)(Cyttp) (1) affords [cis-mer-Ru(OSO₂CF₃)(CO)₂(Cyttp)]O₃SCF₃ (2(O₃SCF₃)) and, on longer reaction times, [cis-mer-Ru(solvent)(CO)₂(Cyttp)](O₃SCF₃)₂ (solvent = acetone, THF, methanol). 2(O₃SCF₃) reacts with each of NaF, LiCl, LiBr, NaI, and LiHBEt₃ to yield [cis-mer-RuX(CO)₂(Cyttp)]⁺ (X = F (3), Cl (4), Br (5), I (6), H (7)), isolated as 3-7(BPh₄). These conversions proceed with high stereospecificity to afford only a single isomer of the product that is assigned a structure in which the Ph group of Cyttp points toward the CO trans to X (anti when X = F, Cl, Br, or I; syn when X = H). Treatment of 2(O₃SCF₃) with NaOMe and CO generates the methoxycarbonyl complex [cis-mer-Ru(CO₂Me)(CO)₂(Cyttp)]⁺ (8), whereas addition of excess n-BuLi to 2(O₃SCF₃) in THF under CO affords mer-Ru(CO)₂(Cyttp) (9). The two ¹³C isotopomers [cis-mer-Ru(OSO₂CF₃)(CO)(¹³CO)(Cyttp)]O₃SCF₃ (2′(O₃SCF₃): ¹³CO trans to P_C; 2″(O₃SCF₃): ¹³CO cis to all P donors) were synthesized by appropriate adaptations of known transformations and used in mechanistic studies of reactions with each of LiHBEt₃, NaOMe/CO, and n-BuLi. Whereas LiHBEt₃ reacts with 2′(O₃SCF₃) and 2″(O₃SCF₃) to replace triflate by hydride without any scrambling of the carbonyl ligands, the corresponding reactions of NaOMe-CO are more complex. The methoxide combines with the CO cis to triflate in 2, and the resultant methoxycarbonyl ligand ends up positioned trans to the incoming CO in 8. A mechanism is proposed for this transformation. Finally, treatment of either 2′(O₃SCF₃) or 2″(O₃SCF₃) with an excess of n-BuLi leads to the formation of the same two ruthenium(0) isomers of mer-Ru(CO)(¹³CO)(Cyttp). These products represent, to our knowledge, the first example of a syn-anti pair of isomers of a five-coordinate metal complex.     

Bis(O2S2 macrocycle) complexes of palladium(II)

Two isomeric dibenzo-O₂S₂ macrocycles L¹ and L² have been synthesised and their coordination chemistry towards palladium(II) has been investigated. Two-step approaches via reactions of 1:1-type complexes, [cis-Cl₂LPd] (1a: L = L¹, 1b: L = L²), with different O₂S₂ macrocycle systems (L¹ and L²) have led to the isolation of the following bis(O₂S₂ macrocycle) palladium(II) complexes in the solid state: [Pd(L¹)₂](ClO₄)₂ (2a) and a mixture of [Pd(L¹)₂](ClO₄)₂ (2a) + [Pd(L²)₂](ClO₄)₂ (2b).     

Synthesis, structure and properties of TTF-carboxylate bridged paddlewheel dirhodium complexes, Rh2(BuCO2)3(TTFCO2) and Rh2(BuCO2)2(TTFCO2)2

Reaction of tetrathiafulvalene carboxylic acid (TTFCO₂H) with paddlewheel dirhodium complex Rh₂(Bu^tCO₂)₄ yielded TTFCO₂-bridged complexes Rh₂(Bu^tCO₂)₃(TTFCO₂) (1) and cis- and trans-Rh₂(Bu^tCO₂)₂(TTFCO₂)₂ (cis- and trans-2). Their triethylamine adducts [1(NEt₃)₂] and cis-[2(NEt₃)₂] were purified and isolated with chromatographic separation, and characterized with single crystal X-ray analysis. Trans-[2(NEt₃)₂] is not completely separated from a mixture of cis- and trans-[2(NEt₃)₂], but its single crystals were obtained from a solution of the mixture. A three-step quasi-reversible oxidation process was observed for 1 in MeCN. The first two steps correspond to the oxidation of the TTFCO₂ moiety and the last one is the oxidation of the Rh₂ core. The oxidation of cis-2 is observed as a two-step process with very similar E_1/2 values to those of the first two processes for 1. Both 1⁺ and cis-2²⁺ in MeCN at room temperature show isotropic ESR spectra with a g value of 2.008 and a_H = 0.135 mT for two equivalent H atoms and a_H = 0.068 mT for one H atom. The redox and ESR data of cis-2 suggest that the intramolecular interaction between the TTF moieties is very small.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.     

Transition metal complexes of 2-amino-3,5-dihalopyridines: Synthesis, structures and magnetic properties of Cu(3,5-diCAP)2X2 and Cu(3,5-diBAP)2X2

A family of bis(2-amino-3,5-dihalopyridine)dihalocopper(II) compounds has been synthesized, including (3,5-diCAP)₂CuCl₂ (1), (3,5-diCAP)₂CuBr₂ (2), (3,5-diBAP)₂CuCl₂ (3), and (3,5-diBAP)₂CuBr₂ (4) [3,5-diCAP = 2-amino-3,5-dichloropyridine; 3,5-diBAP = 2-amino-3,5-dibromopyridine]. These complexes have been analyzed through single crystal X-ray diffraction and temperature dependant magnetic susceptibility. The compounds are all isostructural, forming bi-bridged chains with long Cu-X?Cu bridges in the crystal lattice. The two copper chloride compounds (1 and 3) exhibit weak antiferromagnetic interactions along these chains.     

Supramolecular assemblies of new 2-D complexes: Syntheses, crystal structures, spectroscopic and magnetic properties of {[MnAu2(CN)4(NITpPy)2(H2O)2]}n and {[Co(N(CN)2)2(NITpPy)2(H2O)2]}n

Two new complexes, {[MnAu₂(CN)₄(NITpPy)₂(H₂O)₂]}_n (1) and {[Co(N(CN)₂)₂(NITpPy)₂(H₂O)₂]}_n (2), have been synthesized and characterized. The single-crystal X-ray analysis for the complexes 1 and 2 demonstrates that each M(II) (M = Mn or Co) ion assumes a distorted octahedral MN₄O₂ coordination polyhedron. Four nitrogen atoms come from the cyanide groups and the pyridyl rings in a common plane, and two oxygen atoms come from the H₂O molecules in trans-positions. The structures of complexes 1 and 2 illustrate that aurophilicity and/or hydrogen bonding interactions play important roles in increasing dimensionality. Magnetic investigations on complexes 1 and 2 show the presence of weak antiferromagnetic interactions.     

[Mn2(Fpymo)4(H2O)4]: Synthesis, structure, magnetism and thermally induced solid-to-solid polymerisation reactions

The reaction of an aqueous solution of Mn(ClO₄)₂ · 6H₂O with 5-fluoro-2-hydroxypyrimidine (HFpymo) and NaOH in 1:2:1 ratio affords a species analysing as Mn(Fpymo)₂(H₂O)₂ (1) in 70% yield. Single crystal X-ray analysis reveals that 1 consists of [Mn₂(μ-Fpymo-N¹,O²)₂(Fpymo-O²)₂(H₂O)₄] dinuclear units, in which each Mn(II) ion shows a slightly distorted trigonal bipyramidal stereochemistry. Thermal treatment of 1 above 150 °C gives an anhydrous, amorphous material analysing as Mn(Fpymo)₂ (2a). Further heating of this compound above 250 °C results in the formation of the microcrystalline Mn(Fpymo)₂ species (2b). The thermal dependence of the magnetic susceptibility χ has been studied for species 1 and 2b in the 2-300 K temperature range at 100, 300 and 5000 Oe field strengths. The fitting of the χ values of 1 to the Curie-Weiss equation gives values of C = 2.450(2) and θ = 1.0(2) K, which is indicative of an almost negligible magnetic interaction between the Mn(II) centres. At variance, 2b shows a significant antiferromagnetic behaviour, with a decrease of the μ_eff values upon cooling. The fitting of the χ values of 2b to the Curie-Weiss equation gives the respective C and θ values of 4.26(1) and −14.8(3) K, which agrees with an efficient coupling of the magnetic Mn(II) centres, possibly through bridges of the Fpymo-N¹,N³ kind, within a polymeric network. The N₂ and CO₂ gas adsorption measurements at 77 K and 293 K, respectively, show that the 2b phase is not microporous, which is reflected in its low BET surface (19 m² g⁻¹) and its BJH pore size distribution.     

Synthesis, crystal structure, magnetic properties and electrochemical behaviour of the mixed valence compound [Cu(CN)3Cu(C3H10N2)2]

The binuclear mixed valence copper(I/II) compound [Cu^I(CN)₃Cu^II(tn)₂] (1) (tn = propane-1,3-diamine) and its acetonitrile adduct [Cu^I(CN)₃Cu^II(tn)₂] · 2MeCN (2) have been synthesized. Complex 1 crystallizes triclinic, space group , a = 8.117(2) Å, b = 8.389(2) Å, c = 11.920(2) Å, α = 108.728(3)°, β = 100.024(3)°, γ = 104.888(4)°, Z = 2, and compound 2 monoclinic, space group P2₁/m, a = 8.752(2) Å, b = 13.243(3) Å, c = 9.549(2) Å, β = 114.678(4)°, Z = 2. In both crystal structures, the binuclear [Cu^I(CN)₃Cu^II(tn)₂] complex with slightly different bonding geometries is formed. One of the three nitrogen atoms of a Cu^I(CN)₃ moiety is coordinated to Cu(II) at the apex of a square-pyramid with two chelating ligands tn on its base. The shortest intramolecular Cu^II?Cu^II distance in 1 is 5.640(7) Å. The EPR behaviour of 1 has been investigated at room temperature and at 77 K. The magnetic properties were measured in the temperature range 1.8-300 K.