Fatty Acid Specificity in Lipase-Catalyzed Synthesis of Glucoside Esters

The fatty acid specificity of the B-lipase derived from Candida antarctica was investigated in the synthesis of esters of ethyl D-glucopyranoside. The specificity was almost identical with respect to straight-chain fatty acids with 10 to 18 carbon atoms. However, lower fatty acids such as hexanoic and octanoic acid and the unsaturated 9-cis-octadecenoic acid were found to be poor substrates of the enzyme. As a consequence of this selectivity, these fatty acids were accumulated in the unconverted fraction when ethyl D-glucopyranoside was esterified with an excess of a mixture of fatty acids. This accumulation can reduce the overall effectiveness of the process as the activity of the lipase was found to be reduced when exposed to high concentrations of short-chain fatty acids. Finally, using a simplified experimental set-up, the specificity of the C. antarctica B-lipase was compared to the specificity of lipases derived from C. rugosa, Mucor miehei, Humicola, and Pseudomonas. Apart from the C. rugosa lipase, which exhibited a very poor performance, all the enzymes showed a very similar specificity with respect to fatty acids longer than octanoic acid while only the C. antarctica B-lipase showed activity towards sort-chain fatty acids.     

Enrichment of pinolenic acid from pine nut oil via lipase-catalyzed ethanolysis with an immobilized Candida antarctica lipase

Abstract

Pinolenic acid (PLA) enrichment as an ethyl ester from pine nut oil was successfully accomplished in a batch reactor by lipase-catalyzed ethanolysis using Novozym 435 lipase from Candida antarctica as a biocatalyst. PLA is predominantly an sn-3 substituent of the pine nut oil triacylglycerol (TAG), where it accounts for about 39 mol% of the fatty acids esterified at that position. In the presence of ethanol, Novozym 435 exhibited sn-3 regiospecificity with respect to the TAG of pine nut oil. The effect of the molar ratio of reactants on PLA enrichment by ethanolysis was investigated. The molar ratios of pine nut oil to ethanol were varied from 1:20 to 1:100. A fatty acid ethyl ester (FAEE) fraction with higher PLA content was obtained in the early stage of the reaction, although the yield of PLA was small. However, the PLA content of the FAEEs decreased with increasing reaction time, while the yield of PLA increased. The molar ratio of pine nut oil to ethanol that produced the optimum content and yield of PLA in FAEEs was 1:80.     

Enhancement of activity and selectivity of Candida rugosa lipase and Candida antarctica lipase A by bioimprinting and/or immobilization for application in the selective ethanolysis of fish oil

Candida rugosa lipase (CRL) and Candida antarctica lipase A (CALA) with improved activity and selectivity were prepared for use in organic solvent media. CRL bioimprinted with fatty acids exhibited eightfold enhanced transesterification activity in hexane. Combination of bioimprinting and coating with lecithin or with immobilization did not improve the activity further. CALA was immobilized with and without bioimprinting, none of which improved the activity. All modified lipases were tested for selective ethanolysis of fish oil to concentrate omega-3 polyunsaturated fatty acids (PUFA). None of the preparations, except the immobilized ones catalysed ethanolysis. Immobilized CRL-catalyzed ethanolysis giving 27% (v/v) ethyl esters (EE) in 48 h, of which 43 mol% was oleic acid but no PUFA was detected in the EE fraction. Fatty acid selectivity of CALA was significantly improved by immobilization combined with bioimprinting, resulting in 5.5-fold lower omega-3 PUFA in EE.     

Preparation of a whole-cell biocatalyst of mutated <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase B (mCALB) by a yeast molecular display system and its practical properties

To prepare a whole-cell biocatalyst of a stable lipase at a low price, mutated Candida antarctica lipase B (mCALB) constructed on the basis of the primary sequences of CALBs from C. antarctica CBS 6678 strain and from C. antarctica LF 058 strain was displayed on a yeast cell surface by α-agglutinin as the anchor protein for easy handling and stability of the enzyme. When mCALB was displayed on the yeast cell surface, it showed a preference for short chain fatty acids, an advantage for producing flavors; although when Rhizopus oryzae lipase (ROL) was displayed, the substrate specificity was for middle chain lengths. When the thermal stability of mCALB on the cell surface was compared with that of ROL on a cell surface, T _1/2, the temperature required to give a residual activity of 50% for heat treatment of 30 min, was 60°C for mCALB and 44°C for ROL indicating that mCALB displayed on cell surface has a higher thermal stability. Furthermore, the activity of the displayed mCALB against p-nitrophenyl butyrate was 25-fold higher than that of soluble CALB, as reported previously. These findings suggest that mCALB-displaying yeast is more practical for industrial use as the whole-cell biocatalyst.     

Enrichment of very-long-chain mono-unsaturated fatty acids by lipase-catalysed hydrolysis and transesterification

Partial hydrolysis of triacylglycerols of high-erucic-acid seed oils from white mustard (Sinapis alba), oriental mustard (Brassica juncea) and honesty (Lunaria annua), catalysed by lipases from Candida cylindracea and Geotrichum candidum, leads to enrichment of erucic acid and other very-long-chain mono-unsaturated fatty acids (VLCMFA) in the acylglycerols (mono-, di- and triacylglycerol) while the C₁₈ fatty acids (oleic, linoleic and linolenic) are enriched in the fatty acid fraction. Partial hydrolysis of the high-erucic-acid triacylglycerols, catalysed by lipases from porcine pancreas, Chromobacterium viscosum, Rhizopus arrhizus and Rhizomucor miehei yields fatty acids with substantially higher levels of VLCMFA, as compared to the starting material, while the C₁₈ fatty acids are enriched in the acylglycerol fraction. Lipases from Penicillium sp. and Candida antarctica are ineffective for the fractionation of either group of fatty acids. Transesterification of the high-erucic-acid triacylglycerols with ethyl, propyl or butyl acetate or with n-butanol, catalysed by the lipase from R. miehei, leads to enrichment of VLCMFA in the alkyl (ethyl, propyl or butyl) esters, whereas the C₁₈ fatty acids are enriched in the acetylacylglycerols and acylglycerols.     

Lipase catalyzed acylation of glucose

Summary Octanoylglucose was synthesized from insoluble glucose and octanoic acid in acetonitrile, using lipase fromCandida antarctica as catalyst. The initial concentration of octanoic acid was optimized to give complete conversion of glucose to monoester and avoid diester formation. The acylation occurred exclusively at the primary hydroxyl group on the glucose ring.     

Biocatalytic acylation of carbohydrates with fatty acids from palm fatty acid distillates

Palm fatty acid distillates (PFAD) are by-products of the palm oil refining process. Their use as the source of fatty acids, mainly palmitate, for the biocatalytic synthesis of carbohydrate fatty acid esters was investigated. Esters could be prepared in high yields from unmodified acyl donors and non-activated free fatty acids obtained from PFAD with an immobilized Candida antarctica lipase preparation. Acetone was found as a compatible non-toxic solvent, which gave the highest conversion yields in a heterogeneous reaction system without the complete solubilization of the sugars. Glucose, fructose, and other acyl acceptors could be employed for an ester synthesis with PFAD. The synthesis of glucose palmitate was optimized with regard to the water activity of the reaction mixture, the reaction temperature, and the enzyme concentration. The ester was obtained with 76% yield from glucose and PFAD after reaction for 74 h with 150 U ml⁻¹ immobilized lipase at 40°C in acetone.     

Purification and characterization of the extracellular and cell-bound lipases from a Penicillium cyclopium variety

Summary A new strain of Penicillium cyclopium was found on mouldy Grenoble walnuts. From the culture filtrate, two new extracellular lipases (A- and B-lipase) were isolated and characterized. The mycelium contained one of the two forms of lipase (B-lipase). The specificity of the cell-bound lipase linked to the mycelium was then studied. The enzyme was specific to shortchain homogeneous triacylglycerols; it preferred to attack the o-position rather than the p-position, and showed stereospecificity on the sn-1 position. Correspondence to: L.-C. Comeau     

Fatty Acid Transport Through the Blood-Brain Barrier

Across the cerebral capillaries, the anatomical locus of the blood-brain barrier, the unidirectional influxes of the saturated fatty acids, octanoic and myristic acids, and the unsaturated essential fatty acid, linoleic acid, were measured. Employing an in situ rat brain perfusion technique that allows control of perfusate composition and accurate measurement of perfusate-to-brain fatty acid transport, we found that both [¹⁴C]octanoic and [¹⁴C]myristic acids were transported through the blood-brain barrier in vivo, in large part, by a specific, probenecid-sensitive transport system. However, the transport of [¹⁴C]linoleic acid was not probenecid sensitive. With 0.5 μM fatty acid but no plasma proteins in the perfusate, the permeability-surface area constant was higher for myristic acid (4.8 × 10^--²× s^-1) than for octanoic and linoleic acids (1.5 and 1.2 × 10^--²× s^-1, respectively). Approximately 70, 30, and 25% of the [¹⁴C]myristic, [¹⁴C]octanoic, or [¹⁴C]linoleic acids, respectively, were extracted from the perfusate.     

Simultaneous conversion of free fatty acids and triglycerides to biodiesel by immobilized Aspergillus oryzae expressing Fusarium heterosporum lipase

The presence of high levels of free fatty acids (FFA) in oil is a barrier to one‐step biodiesel production. Undesirable soaps are formed during conventional chemical methods, and enzyme deactivation occurs when enzymatic methods are used. This work investigates an efficient technique to simultaneously convert a mixture of free fatty acids and triglycerides (TAG). A partial soybean hydrolysate containing 73.04% free fatty acids and 24.81% triglycerides was used as a substrate for the enzymatic production of fatty acid methyl ester (FAME). Whole‐cell Candida antarctica lipase B‐expressing Aspergillus oryzae, and Novozym 435 produced only 75.2 and 73.5% FAME, respectively. Fusarium heterosporum lipase‐expressing A. oryzae produced more than 93% FAME in 72 h using three molar equivalents of methanol. FFA and TAG were converted simultaneously in the presence of increasing water content that resulted from esterification. Therefore, F. heterosporum lipase with a noted high level of tolerance of water could be useful in the industrial production of biodiesel from feedstock that has high proportion of free fatty acids.     

Lipase-catalyzed preparation of mono- and diesters of ferulic acid

Lipophilic and stable derivatives of ferulic acid are required to improve its efficacy in fatty foods and to optimize its use in cosmetic and pharmaceutical preparations. We report an improved synthesis of ferulic acid monoesters (ethyl ferulate and lauryl ferulate) using immobilized lipase from Candida antarctica B (CALB) in diisopropyl ether (DIPE). Maximum yields were 89% and 85% in 200 h for ethyl and lauryl ferulate, respectively. Ethyl ferulate was further acylated with vinyl esters to form ferulate diesters. 4-Acetoxy-ethyl ferulate was obtained with the immobilized lipase from Alcaligenes sp. (QLG) with 59% yield in 72 h, whereas 4-dodecanoyloxy-ethyl ferulate (a new compound) was synthesized with 52% yield in 72 h using CALB. DIPE was the best solvent for the transesterifications. Finally, the anti-inflammatory activity of the synthesized derivatives was evaluated in vitro; the compounds bearing a dodecyl chain showed improved anti-inflammatory activity compared with short-chain esters.     

Enzymic alcoholysis of blackcurrant oil

Alcoholysis of blackcurrant oil mediated by Pseudomonas fluorescens lipase performed at 30°C in ethanol (96%, v/v) used both as a solvent and as a reactant. After 16 h, 95% of triacylglycerols present in the oil was converted into a mixture consisting of fatty acid ethyl esters, free fatty acids, monoacylglycerols and diacylglycerols. The highest amount of fatty acid ethyl esters (52%) was achieved after 8 h.     

Synthesis of flavor and fragrance esters using <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase

Candida antarctica lipase fraction B (CAL-B) showed substrate specificity in the synthesis of esters in hexane involving reactions of short-chain acids having linear (acetic and butyric acids) and branched chain (isovaleric acid) structures, an unsaturated (tiglic acid) fatty acid, and phenylacetic acid with n-butanol and geraniol. The variation in the conversion to the esters was ca. 10%. Similar results were observed in a study of the alcohol specificity of the enzyme for esterification of acetic and butyric acids with four alcohols: n-butyl, isopentyl, 2-phenylethyl, and geraniol. Enantioselectivity of CAL-B in hexane with a range of chiral -substituted or -substituted carboxylic acids and n-butyl alcohol was analyzed. The results show that CAL-B can be employed as a robust biocatalyst in esterification reactions due to the high conversions obtained in the synthesis of short-chain flavor esters in an organic solvent, although this enzyme exhibited modest enantioselectivity with chiral short-chain carboxylic acids.     

Inhibitory effect of medium-chain-length fatty acids on synthesis of polyhydroxyalkanoates from volatile fatty acids by Ralstonia eutropha

Medium-chain-length fatty acids, such as nonanoic (9:0) and octanoic (8:0) acids, are more toxic to Ralstonia eutropha than volatile fatty acids such as acetic, propionic and butyric acids. Nonanoic acid was degraded to acetic and propionic acids via -oxidation by Ralstonia eutropha for cell growth and synthesis of polyhydroxyalkanoates (PHAs). In a mixture of the fatty acids, utilization of nonanoic acid was depressed by acetic and propionic acids, and vice versa. The PHA accumulation from the volatile fatty acids was decreased from 53% (w/w) of dry cell mass to 23% due to the nonanoic acid. Similar phenomena were also observed with octanoic acid and its metabolic intermediates, acetic and butyric acids.     

A novel,two consecutive enzyme synthesis of feruloylated monoacyl- and diacyl-glycerols in a solvent-free system

Feruloylated mono- and di-acylglycerols were synthesized in a two step reaction: ethyl ferulate was first transesterified with glycerol and then this was esterified with oleic acid. The yield of the combined feruloylated mono- and di-acylglycerols in the second reaction reached 96% when esterification of 0.3 g transesterification products with 2.22 g oleic acid was catalyzed with 0.25 g Candida antarctica lipase at 60°C under a vaccum of 10 mmHg for 1.33 h.     

Release of short chain fatty acids from cream lipids by commercial lipases and esterases

Lipases and esterases are frequently used in dairy production processes to enhance the buttery flavour of the end product. Short chain fatty acids, and especially butanoic acid, play a key role in this and different enzymes with specificity towards short chain fatty acids are commercially available as potent flavouring tools. We have compared six lipases/esterases associated with buttery flavour production. Although specificity to short chain fatty acids was ascribed to each enzyme, clear differences in free fatty acid profiles were found when these enzymes were applied on cream. Candida cylindraceae lipase was the most useful enzyme for buttery flavour production in cream with the highest yield of free fatty acids (57 g oleic acid 100 g⁻¹ fat), no release of long chain fatty acids and specificity towards butanoic acid.     

Glycerol acyl-transfer kinetics of a circular permutated Candida antarctica lipase B

Triacylglycerols containing a high abundance of unusual fatty acids, such as γ-linolenic acid, or novel arylaliphatic acids, such as ferulic acid, are useful in pharmaceutical and cosmeceutical applications. Candida antarctica lipase B (CALB) is quite often used for non-aqueous synthesis, although the wild-type enzyme can be rather slow with bulky and sterically hindered acyl donor substrates. The catalytic performance of a circularly permutated variant of CALB, cp283, with various acyl donors and glycerol was examined. In comparison to wild-type CALB, butyl oleate and ethyl γ-linolenate glycerolysis rates were 2.2- and 4.0-fold greater, respectively. Cp283 showed substrate inhibition by glycerol, which was not the case with the wild-type version. With either ethyl ferulate or vinyl ferulate acyl donors, cp283 matched the performance of wild-type CALB. Changes in active site accessibility resulting from circular permutation led to increased catalytic rates for bulky fatty acid esters but did not overcome the steric hindrance or energetic limitations experienced by arylaliphatic esters.     

Kinetic study on the inhibition of xanthine oxidase by acylated derivatives of flavonoids synthesised enzymatically

Studies have reported that flavonoids inhibit xanthine oxidase (XO) activity; however, poor solubility and stability in lipophilic media limit their bioavailability and applications. This study evaluated the kinetic parameters of XO inhibition and partition coefficients of flavonoid esters biosynthesised from hesperidin, naringin, and rutin via enzymatic acylation with hexanoic, octanoic, decanoic, lauric, and oleic acids catalysed by Candida antarctica lipase B (CALB). Quantitative determination by ultra-high performance liquid chromatography–mass spectrometry (UHPLC–MS) showed higher conversion yields (%) for naringin and rutin esters using acyl donors with 8C and 10C. Rutin decanoate had higher partition coefficients (0.95), and naringin octanoate and naringin decanoate showed greater inhibitory effects on XO (IC₅₀ of 110.35 and 117.51?μM, respectively). Kinetic analysis showed significant differences (p?K_m values, whereas the values for V_max were the same, implying the competitive nature of XO inhibition.     

Clean synthesis of biolubricants for low temperature applications using heterogeneous catalysts

Biolubricants derived from vegetable oils are environmentally compatible products due to their low toxicity and good biodegradability. Synthetic esters based on polyols and fatty acids possess suitable properties for lubricant applications, even at extreme temperatures. In this work, synthesis of esters from trimethylolpropane (TMP) and carboxylic acids from C5 to C18 has been studied and compared using different heterogeneous catalysts (silica–sulphuric acid, Amberlyst-15, and immobilised lipase B from Candida antarctica). Silica–sulphuric acid was found to be the most efficient catalyst followed by Amberlyst-15, especially when using short chain carboxylic acids. The reaction efficiency decreased with increasing alkyl chain length. On the other hand, the immobilised lipase (Novozym^®435) did not exhibit any activity with C5 acid and the activity increased with increase in length of the fatty acid chain. For synthesis of C18-ester, the biocatalytic production turned out to be comparable to silica–sulphuric acid, and moreover led to a better quality of the final product. The products showed suitable cold-flow properties for application at low temperature. A general trend of increasing pour point (−75 °C to −42 °C) and viscosity index (80–208) with increase in alkyl chain of the carboxylic acid from C5 to C18 was observed. The synthesis of TMP-trioleate using the solid acid catalysts and the biocatalyst was compared using the freeware package EATOS (environmental assessment tool for organic synthesis) and showed the enzymatic route to have the least environmental impact.     

Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.