Matrix interferences in the analysis of digested biological tissues with inductively coupled plasma-mass spectrometry

To investigate the physiological roles or toxicity of trace or toxic elements, multielement analysis of limited quantities of samples in the biological tissues is required. Inductively coupled plasma mass spectrometry (ICP-MS) suits this requirement, but spectral and nonspectral interferences are inevitable. We examined correction methods for the nonspectral interferences by analyzing signals of 21 elements in various concentrations of HNO₃ as well as five major elements (Na, K, P, Ca, and Cl). Using internal standards, the interferences caused by the major elements were corrected, but the interferences caused by HNO₃ were impossible to correct for elements with high ionization potentials. The analytical results using the standard addition method on 14 elements in standard reference materials and fresh brain tissues confirmed the accuracy of this method. Thus, we concluded that the standard addition method is useful to correct for the nonspectral interferences.     

TRACE ELEMENT ANALYSIS OF PROTEINS DIRECTLY FROM 2D-PAGE: AN EFFICIENT STRATEGY FOR METALLOPROTEOMICS

Inductively coupled plasma–mass spectrometry (ICP-MS) is a sensitive analytical method to detect the total concentrations of elements in biological samples, but it is unable to identify molecules that can bind to metals, and for this reason it is vital to combine this method's use with other biochemical techniques. Therefore, in order to identify elements complexed to specific proteins, a very relevant combination of bidimensional electrophoresis followed by ICP-MS was used. Protein spots from gels were excised and submitted directly to element detection, a method not reported before. This report focused on the use of plasma from people with laryngeal carcinoma. Most elements were below detection level, with only Cr and Pb being observed in all samples. Although the relationship between metals and laryngeal cancer was not conclusive, it is possible to affirm that the methodology utilized here is successful and has the advantage of determining to which proteins the elements bind.     

Trace element analysis of proteins directly from 2d-page: an efficient strategy for metalloproteomics

Inductively coupled plasma-mass spectrometry (ICP-MS) is a sensitive analytical method to detect the total concentrations of elements in biological samples, but it is unable to identify molecules that can bind to metals, and for this reason it is vital to combine this method's use with other biochemical techniques. Therefore, in order to identify elements complexed to specific proteins, a very relevant combination of bidimensional electrophoresis followed by ICP-MS was used. Protein spots from gels were excised and submitted directly to element detection, a method not reported before. This report focused on the use of plasma from people with laryngeal carcinoma. Most elements were below detection level, with only Cr and Pb being observed in all samples. Although the relationship between metals and laryngeal cancer was not conclusive, it is possible to affirm that the methodology utilized here is successful and has the advantage of determining to which proteins the elements bind.     

RNAA as compared to ICP-MS for the analysis of normal human serum

The merits of radiochemical neutron activation analysis (RNAA) and inductively coupled plasma mass spectrometry (ICP-MS) are critically discussed for the determination of trace and ultratrace elements in normal human serum. For RNAA, two semiautomated procedures, allowing the determination of up to 18 elements, are briefly described. ICP-MS has a series of interesting features for the determination of trace elements. Matrix and spectral interferences can mostly be avoided or corrected for. After a simple 5- or 10-fold dilution and addition of an internal standard, more than 20 elements can be measured precisely and accurately.     

Trace elemental content of biological materials

The advantages and disadvantages of neutron activation analysis (NAA) and inductively coupled plasma-source mass spectrometry (ICP-MS) for the analysis of biological materials is reviewed. Comparison is made between NAA (instrumental) and ICP-MS (conventional pneumatic solution nebulization and laser ablation) analysis of the biological reference material National Bureau of Standards (NBS) SRM 1577 Bovine Liver. Relatively good agreement is achieved between the results for the 18 elements analyzed by both techniques and those either certified or reported in the literature. Elemental concentrations for Li, Mg, Al, Ca, Cr, Mn, Fe, Cu, Zn, Br, Rb, and Cs are also reported for IAEA Mixed Human Diet (H9), NBS SRM 909 Human Serum, and NBS SRM 1577a Bovine Liver, analyzed by solution nebulization ICP-MS.     

Indicator ability of biosubstances in monitoring the moderate occupational exposure to toxic metals

In order to improve the monitoring system, watching influence of toxic metals on human health in industrial plants, indicator properties of different biosubstances were compared. Four types of samples (whole blood, plasma, urine, and hair) from 263 workers of the “Khimprom” chemical plant (Novocheboksarsk, Russia) were subjected to multielement analysis by ICP-AES/ICP-MS. 19–25 chemical elements, including main toxic metals (Cd, Hg, Pb, etc.) were determined. The results were calculated with regard to workers’ individual data on occupational exposure to chemical elements. Hair was found to be the most sensitive to toxic and conditionally toxic trace metals: Pb, Mn, Cr, Be, Ni, while occupational contact with macro elements (Na, P), trace metalloids (Si, B) and some other metals (Zn) was not reflected in hair. Whole blood relatively weakly indicated a moderate occupational level of metals except Pb and Mn, but effectively reflected deficiencies of essential elements: I, Cr, and shifts in K/Na ratio, which are likely to be secondary effects of harmful occupational factors. Blood plasma reflected only contact with Be, P; urine – only with Ni. In both whole blood and plasma the changes for the absolute majority of elements were similar. Thus, hair analysis is useful for monitoring the occupational exposure to toxic and conditionally toxic chemical elements, while a general estimation of occupational harmful influence on mineral metabolism requires simultaneous investigation of two biosubstances: hair and whole blood, or hair and blood plasma, with whole blood being more preferable. Analysis of urine is appropriate for monitoring particular chemical elements, e.g. nickel.     

The potential of inductively coupled plasma mass spectrometry (ICP-MS) for the simultaneous determination of trace elements in whole blood, plasma and serum.

The advantages accruing to biochemical and clinical investigations from a method that allows the simultaneous quantification (RSD < or = 10%) of many elements in blood, plasma, and serum at concentrations equal to one-hundredth of the lower limits of the normal ranges are undeniable. The suitability of inductively coupled argon plasma low-resolution quadrupole mass spectrometry (ICP-MS), a simultaneous method with low detection limits, is evaluated for the quantification of inorganic constituents in whole blood, plasma, and serum with consideration of the dilution associated with the mineralization of the samples, of isobaric and polyatomic interferences and of normal ranges. Of the 3 bulk elements, the 3 major electrolytes, the 15 essential elements, the 8 toxic elements, the 4 therapeutic elements, and the 14 elements of potential interest (total of 47 elements) only 7 elements (Ca, Cu, K, Mg, Rb, Sr, Zn) can be simultaneously quantified under these rigorous conditions in serum and only 8 elements (additional element Pb) in whole blood. Quantification of elements in the Seronorm Standards "Whole Blood" and "Serum" showed, that this list of simultaneously determinable elements in these matrices is reasonable. Although this list is disappointingly short, the number of elements determinable simultaneously by ICP-MS is still larger than that by ICP-AES or GFAAS. Improved detectors, more efficient nebulizers, avoidance of interferences, better instrument design, and high-resolution mass spectrometers promise to increase the number of elements that can be determined simultaneously.     

基于电感耦合等离子体质谱的蛋白质定量技术研究进展

综述了ICP-MS法应用于蛋白质定量技术方面的研究进展.蛋白质定量研究已成为蛋白质组学研究领域的热点,它是解析生物体蛋白质功能的重要途径.基于同位素标记和生物质谱分析技术是蛋白质定量最常用的方法之一,近年来,随着质谱技术的发展,电感耦合等离子体质谱(ICP-MS)技术成为元素测量的重要手段,这使其在蛋白质定量中具一定的应用前景.     

化学元素用于识别褐飞虱不同地理种群的可行性研究

研究褐飞虱Nilaparvata lugens (Stal)不同地理种群成虫体内化学元素组成特点, 筛选出可用于褐飞虱不同地理种群识别的化学元素种类。应用电感耦合等离子体质谱（ICP-MS）半定量分析检测存在于褐飞虱体内的化学元素, 对各元素进行巢式设计方差分析, 初步筛选出地理种群间具有显著差异的元素; 然后对这些元素采用ICP-MS全定量分析, 进一步筛选、 验证地区间差异显著而年份间差异不显著的元素。结果表明, 褐飞虱体内存在57种化学元素, 巢式设计方差分析筛选出了地区间具有显著性差异的27种元素。随后的ICP-MS全定量分析及统计检验, 筛选出各地理种群都存在而含量不同的Ce, Nd, Pr, Sm, Gd, Th, V, Tl, Mo, Cs, Fe和Mn 12种元素。不同地理种群褐飞虱成虫体内的一些化学元素含量存在着显著差异, 有助于褐飞虱远距离迁入虫源地的识别研究, 可为追溯褐飞虱地理来源提供新的方法。     

Single-cell ICP-MS to address the role of trace elements at a cellular level

The heterogeneity properties shown by cells or unicellular organisms have led to the development of analytical methods at the single-cell level. In this sense, considering the importance of trace elements in these biological systems, the inductively coupled plasma mass spectrometer (ICP-MS) configured for analyzing single cell has presented a high potential to assess the evaluation of elements in cells. Moreover, advances in instrumentation, such as coupling laser ablation to the tandem configuration (ICP-MS/MS), or alternative mass analyzers (ICP-SFMS and ICP-TOFMS), brought significant benefits, including sensitivity improvement, high-resolution imaging, and the cell fingerprint. From this perspective, the single-cell ICP-MS has been widely reported in studies involving many fields, from oncology to environmental research. Hence, it has contributed to finding important results, such as elucidating nanoparticle toxicity at the cellular level and vaccine development. Therefore, in this review, the theory of single-cell ICP-MS analysis is explored, and the applications in this field are pointed out. In addition, the instrumentation advances for single-cell ICP-MS are addressed.     

Human biomonitoring of 73 elements in blood,serum, erythrocytes and urine

BackgroundHuman biomonitoring studies of trace elements in biological fluids are mostly limited to a certain number of elements or biological materials. In this study, we describe the significant extension of a biomonitoring to 73 elements being present in concentration ranges from ng/L to g/L in clinically relevant specimens such as blood, serum, erythrocytes and urine.MethodsThe samples were collected from 102 occupationally non-exposed inhabitants of northern Germany. The elements were determined either by inductively coupled plasma tandem mass spectrometry (ICP-MS/MS) in the low concentration range or by inductively coupled plasma optical emission spectrometry (ICP-OES) for essential trace elements and electrolytes.ResultsMean values and selected percentiles of element concentrations are presented for all sample materials. From the results, we calculated the distribution of elements between plasma and blood cells. Application of ICP-MS/MS improves selectivity and accuracy in the determination of elements that are strongly spectrally interfered, such as Cr, Ge, Pd or Ti in blood samples.ConclusionsThis publication provides very valuable information for occupational or environmental hygienists, toxicologists and clinical chemists due to the particularly high number of determined elements and presented concentration ranges.     

Determination of trace elements in biological materials by inductively coupled plasma spectroscopy with novel chelating resins

Although substantial progress has been achieved in inductovely coupled plasma (ICP) spectroscopy, placing it among the principal spectroscopic tools in analytical chemistry research and applications laboratories, some limitations exist especially for the analysis of ultratrace concentration levels in biological materials. The application of chemical and instrumental techniques to increase the concentration levels of analytes is practical, but complicated by the requirements of maintaining the multielement nature of ICP spectroscopy. Two novel chelating resins [poly(dithiocarbamate) and poly(acrylamidoxime)] have been synthesized and applied with ICP spectrometry to enhance the practical sensitivity for ultratrace concentration determinations in biological and other materials. The determination of a number of trace elements in bone, dialysis solutions, serum, and urine is improved using the resin ICP approach. In addition, speciation of inorganic forms of As, Cr, Se, and Te is possible with the poly(dithiocarbamate) resin, and determination of the chemical forms of these elements in urine was performed.     

Studies on some trace and minor elements in blood

Blood is one of the widely used specimens for biological trace element research because of its biological significance and ease of sampling. We have conducted a study of the blood of the Kalpakkam township population for trace and minor elements. For this purpose, analytical methods have been developed and standardized in our laboratory for the elemental analysis of blood plasma and red cells. Inductively coupled plasma-mass spectrometry (ICP-MS), a relatively new technique, has been applied for the analysis of trace elements. Details regarding spectral interference and matrix interference encountered in the analysis of blood and the methods of correcting them have been discussed. Flame atomic absorption spectrometry (AAS)/atomic emission spectrometry (AES) has been applied for the determination of minor elements. Precision and accuracy of these methods have also been discussed.     

Determination of total arsenic concentrations in nails by inductively coupled plasma mass spectrometry

The analysis of trace elements in biological samples will extend our understanding of the impact that environmental exposure to these elements has on human health. Measuring arsenic content in nails has proven useful in studies evaluating the chronic body burden of arsenic. In this study, we developed methodology with inductively coupled plasma-mass spectrometry (ICP-MS) for the determination of total arsenic in nails. We assessed the utility of the washing procedures for removing surface contamination. Four types of preanalysis treatments (water bath, sonication, water bath plus sonication, and control) after sample decomposition by nitric acid were compared to evaluate the digestion efficiencies. In addition, we studied the stability of the solution over 1 wk and the effect of acidity on the arsenic signal. Arsenic content in the digested solution was analyzed by using Ar-N₂ plasma with Te as the internal standard. The results suggest that washing once with 1% Triton Χ-100 for 20 min for cleaning nail samples prior to ICP-MS analysis is satisfactory. Repeated measurement analysis of variance revealed that there was no significant difference among the various sample preparation techniques. Moreover, the measurements were reproducible within 1 wk, and acidity seemed to have no substantial influence on the arsenic signal. A limit of detection (on the basis of three times the standard deviation of the blank measurement) of 7 ng As/g toenail was achieved with this system, and arsenic recoveries from reference materials (human hair and nails) were in good agreement (95–106% recovery) with the certified/reference values of the standard reference materials. ICP-MS offers high accuracy and precision, as well as highthroughput capacity in the analysis of total arsenic in nail samples.     

Metalloprotein separation and analysis by directly coupled size exclusion high-performance liquid chromatography inductively coupled plasma mass spectroscopy

The feasibility of using directly coupled size exclusion high-performance liquid chromatography inductively coupled plasma mass spectroscopy (HPLC/ICP-MS) for the separation and subsequent elemental analysis of metalloproteins in biological samples has been studied. Data, on up to eight elements, was acquired simultaneously and the reconstructed elemental profiles from the chromatographed samples were quantified by flow injection analysis. Absolute and relative detection limits, reproducibility, operational dynamic range, and linearity of response were initially evaluated by analyzing standards of metallothionein protein of known elemental composition for Cd, Zn, and Cu. There was evidence of displacement of Zn from the protein during chromatography and the substitution of Cu sequestered from the mobile phase. Cd associated with the protein was fully recovered during chromatography. Memory effects, due to protein adsorption to the glassware in the torch box, were minimal and there was no degradation of the resolution of the chromatographed peak during extended transport through the HPLC/ICP-MS interface. The versatility of the technique has been demonstrated by the quantitative multi-element analysis of cytosolic metal-binding proteins separated from the polychaete worm Neanthes arenaceodentata. Fidelity of analysis has been demonstrated by two independent procedures: first, by comparing the elemental profiles obtained by directly aspirating the HPLC eluant into the ICP-MS to those obtained by collecting fractions and quantifying the metal content of the proteins in the conventional analytical mode; second, by comparing the stable isotopic profiles for 114Cd obtained by simultaneous ICP-MS analysis with radiometric profiles of 109Cd obtained by counting radioactivity associated with collected fractions.(ABSTRACT TRUNCATED AT 250 WORDS)     

Optimization of ICP-MS internal standardization for 26 elements by factorial design experiment

IntroductionInternal standardization is a common tool used in inductively coupled plasma – mass spectrometry (ICP-MS) analysis in order to reduce matrix effects, and thus improve the reliability and the robustness of results. However, its efficacy relies on the choice of a proper internal standard (IS) which, ideally, undergoes the same signal variations as the analyte. Thus far, IS selection has mainly relied on the proximity of atomic mass between the analyte and the internal standard.However, while it may be a satisfactory rule of thumb, more recent works suggest that this criterium might not be suitable in several conditions, among which the presence of high amounts of carbon atoms in the sample. This may thus be of particular interest in the case of trace elements determination in biological samples.Materials and methodsIn this study, we propose an empirical and global approach to IS selection in ICP-MS through the use of a factorial design of experiments (DoE), with a focus on biological matrices of interest in clinical analysis: human blood and urine. The suitability of 13 potential IS was evaluated for 26 clinically-relevant analytes, including a polyatomic ion obtained through reaction with oxygen, across 324 experimental conditions.Results and discussionThe results underline several exceptions to the rule of IS selection based on mass proximity, notably when considering heavy or polyatomic analytes. As a consequence, measurements of said analytes in several extreme experimental conditions using IS selected by mass proximity could yield vastly erroneous results (up to 30 times the theoretical concentrations). By contrast, the use of empirically selected IS yielded much more acceptable results.     

Essential metals profile of the hair and nails of patients with laryngeal cancer

Trace elements have an impact on numerous physiological processes. The monitoring of their levels in the organism allows you to detect not only their deficiencies, but also several illnesses. The aim of this study was to compare the levels of essential elements (calcium, magnesium, zinc, copper, iron, manganese) in hair, nails and serum of both patients with laryngeal cancer and healthy people. The determination of six metals was performed by an inductively coupled plasma mass spectrometry (ICP-MS) and an inductively coupled plasma optical emission spectrometry (ICP-OES). The concentration of essential elements in hair and nails of the control group was statistically significantly higher than in the group of patients with laryngeal cancer. In the case of serum, differences were found between the patients and controls in respect of the level of three metals. The results of principal component analysis (PCA) revealed the strong and similar clustering behavior of essential elements in hair and nails. The metals did not correlate between two alternative materials. The present study indicated that, using the level of essential elements in hair and nails as a basis, it is possible to distinguish cancer patients from healthy people. The alternative materials are independent of homeostasis and therefore seem to be more useful in the detection of diseases and mineral deficiencies in human than the classical biological materials, such as blood.     

Simultaneous measurement of the trace elements Al, As, B, Be, Cd, Co, Cu, Fe, Li, Mn, Mo, Ni, Rb, Se, Sr, and Zn in human serum and their reference ranges by ICP-MS

The goal of this article was to establish reference ranges of the concentration of trace elements in human serum and to compare these results with those reported by other authors. We describe the sample preparation and measurement conditions that allow the rapid, precise, and accurate determination of Al, As, B, Be, Cd, Co, Cu, Fe, Li, Mn, Mo, Ni, Rb, Se, Sr, and Zn in human serum samples (n=110) by inductively coupled plasma-mass spectrometry (ICP-MS). Accuracy and precision were determined by analyzing three reconstituted reference serum samples by comparison with other methods and by the standard addition procedure. The advantages of the ICP-MS method include short time of analysis of the elements mentioned, low detection limit, high precision, and high accuracy. Disadventages include a high risk of contamination due to the presence of some of the elements of interest in the environment, the relatively delicate sample handling, and the high cost of the equipment.     

Clean Chemistry for Elemental Impurities Analysis of Pharmaceuticals in Compliance with USP 232

United States Pharmacopeia updated its 100 years old metal analysis method with inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES). These sensitive instruments require that sample preparation be at least as sophisticated as the instrumentation used in the analysis. Sample contamination during sample preparation has to be controlled to an acceptable level given the low detection limit of these instruments and the ubiquitous presence of elements. This article focused on sample contamination during sample preparation. Contaminations from environment, reagents, and lab apparatus were investigated for their impact on trace element analysis. Advice on clean lab practice was offered to the pharmaceutical industry in regard to contamination control in elemental analysis labs at a time when the industry is preparing for compliance with elemental impurities in drug products.     

压力罐消解ICP-MS法同时测定全血中5种微量元素

为了建立同时测定全血中微量元素铬、锰、砷、镉、铅的电感耦合等离子体质谱(ICP-MS)分析法,采用压力罐消解技术对全血样品进行消化,使用ICP-MS法对全血中的五种微量元素铬、锰、砷、镉、铅含量进行测定。结果显示,全血样品中所测定的5种微量元素浓度为0~0.20μg·mL-1时,线性关系良好,相关系数r>0.999,各元素相对标准偏差(RSD)均小于5.0%(n=6),加标回收率为88.4%~107.6%,本法对铬、锰、砷、镉、铅的最低检出浓度分别为0.60、1.4、0.70、0.048、0.18μg·L-1。表明运用ICP-MS同时检测全血中微量元素具有良好的准确度和精密度、灵敏度高、检出限低、元素之间的干扰少,方法高效可行。