Construction of broad-host-range plasmids for the expression of heterologous genes in Acetobacter methanolicus B58

The construction of different plasmids reported here on the basis of a broad-host-range RSF1010 replicon allows an efficient expression of heterologous genes in the acidophilic methanol-assimilating bacterium Acetobacter methanolicus B58. The promoter-probe vector pRS201 was used for the identification and isolation of the promoter containing sequences derived from the DNA of the Acetobacter phage Acm1. Further, this plasmid was coupled with the Escherichia coli promoters tac and p_r creating the expression vectors pRS201tac and pRS201p_r, respectively. After the insertion of the chloramphenicol acetyltransferase (cat) gene of the cloned promoters downstream, the chloramphenicol acetyltransferase (CAT) was determined in a cell-free extract of both E. coli and A. methanolicus. Using E. coli promoters as well as promoters of the Acetobacter phage Acm1 arranged in tandem with the promoters of the heterologous genes to be expressed, the pectat lyase gene (ptlB) of Erwinia carotovora and the threonine A gene (thrA) of E. coli were successfully expressed in A. methanolicus. The stability of recombinant plasmids under various conditions in A. methanolicus strains was tested using antibiotic-free media.     

Overcoming difficulties on synthesis of cardiac troponin-I

Human cardiac troponin-I (cTnI) is one of the most sensitive and specific indicators, used in the diagnosis of myocardial infarction. To produce the protein efficiently, Escherichia coli and Pichia pastoris systems were used. Initial trials for the expression in E. coli were not successful, although different expression vectors with different promoters were tested. This led us to use P. pastoris for the expression. After several trials with two different expression strains of P. pastoris, it was concluded that P. pastoris was also not an optimal expression host for cTnI. Comprehensive analysis of the expression systems indicated that an efficient expression is only possible when the gene is optimized for expression in E. coli. For this purpose, the gene was optimized in-silico, but edited manually afterwards. It was synthesized and cloned into pQE-2 vector. Expression was performed using routine experimental conditions. Thus, cTnI could be efficiently expressed from the optimized gene in E. coli. The expression and purification were practical and may be used for commercial purposes since a total yield of 25µg highly pure protein per milliliter of culture could be obtained. The protein was in its ready-to-use form for many biological applications, including as a standard in diagnostic tests and an antigen for antibody production.     

Development of a Plasmid Vector for Easy Selection of Strong Promoters

A promoter vector pACPR33 for Escherichia coli based on the promotorless ampicillin-resistance gene from pBR322 has been constructed. The promoter of the ampicillin-resistance gene was deleted and replaced by a suitable multiple cloning site. Molecular cloning of promoters into the polylinker resulted in activation of the ampicillin resistance in E. coli. The plasmid contains a functional origin of DNA replication and a tetracycline resistance gene for E. coli, and a chloramphenicol resistance gene for S. aureus. The vector permitted direct detection of promoter activity, especially strong promoters, by easy iodometric determination of β-lactamase activity in liquid or solid media. Received: 26 July 1999 / Accepted: 22 November 1999     

Construction of a novel promoter-probe vector and its application for screening strong promoter for Brevibacterium flavum metabolic engineering

Brevibacterium flavum is an important microorganism for the production of amino acids in industrial fermentation. Knowledge of promoters in B. flavum is essential for efficient modulation of gene expression in metabolic engineering. Here we have constructed a novel E. coli-B. flavum promoter-probe vector pDXW-11. The pDXW-11 habors an oriE for replication in E. coli, genes dso and sso for replication in B. flavum, a kan gene used as selected marker, a multiple cloning sites preceded by a rrnBT1T2 terminator and sequentially followed by stop codons, an SD sequence and a cat reporter gene. Using pDXW-11, activities of several promoters were evaluated in B. flavum. A strong promoter, the tac-M promoter, was designed. The tac-M promoter would be very useful for metabolic engineering research in B. flavum.     

Construction of a promoter-probe vector for the methanol-utilizing bacterium acetobacter methanolicus MB 58

We report here the construction of a promoter-probe vector, pRS2, which can be utilized in either Acetobacter methanolicus MB 58 or Escherichia coli due to the presence of broad-host-range replicon RSF 1010. The vector provides several unique restriction sites for promoter cloning as well as resistance markers for the selection of transformants. The promoter-probe vector was constructed by inserting an EcoRI-SalI-polylinker fragment of pUC 19 into EcoRI/SalI digested pMK 16. The resulting plasmid, pRS1, was cloned into the unique EcoRI site of the broad-host-range plasmid RSF 1010. The vector was used to clone promoter-containing sequences derived from the A. methanolicus MB 58 chromosome as well as the E. coli lac-promoter.     

A new idea for simple and rapid monitoring of gene expression: requirement of nucleotide sequences encoding an N-terminal HA tag in the T7 promoter-driven expression in E. coli

Mammalian expression vectors are used to overexpress genes of interest in mammalian cells. High temperature requirement protein A1 (HtrA1), used as a specific target, was expressed from the pHA-M-HtrA1 plasmid in HEK293T cells, inducing cell death. Expression of HtrA1 was driven by the pHA-M-HtrA1 mammalian expression vector in E. coli resulting in growth suppression of E. coli in an HtrA1 serine protease-dependent manner. By using various combinations of promoters, target genes and N-terminal tags, the T7 promoter and N-terminal HA tag in the mammalian expression vector were shown to be responsible for expression of target genes in E. coli. Thus the pHA-M-HtrA1 plasmid can be used as a novel, rapid pre-test system for expression and cytotoxicity of the specific target gene in E. coli before assessing its functions in mammalian cells.     

Expression of Marker RNAs in Pseudomonas putida

A broad-host-range vector that expresses a unique artificial RNA in Pseudomonas putida has been developed. This vector was derived from the plasmid pBBR1MCS and incorporates regulatory regions from the Escherichia coli ribosomal operon, rrnB. These include the promoters P1 and P2, and the terminators T1 and T2. The gene for the artificial RNA was derived from Vibrio proteolyticus 5S rRNA. The artificial RNA product accumulates to a level that is 10–20% of the total 5S rRNA in P. putida. The RNA product is not incorporated into ribosomes and has a minimal effect on cell growth rate. In contrast, when wild-type V. proteolyticus 5S rRNA was expressed from the vector, it was incorporated into ribosomes. It is expected that this new vector system will allow artificial RNA expression systems to be readily developed for a large variety of species. Received: 16 June 1999 / Accepted: 11 August 1999     

Functional expression of anti-hepatitis B virus (HBV) preS2 antigen scFv by <Emphasis Type="Italic">cspA</Emphasis> promoter system in <Emphasis Type="Italic">Escherichia coli</Emphasis> and application as a recognition molecule for single-walled carbon nanotube (SWNT) field effect transistor (FET)

The preS2 antigens of hepatitis B virus (HBV), which causes a serious health problem in the world, have been implicated in hepatocyte cell binding and viral penetration. Therefore, the importance of antibody production against preS2 antigen for early diagnosis of HBV has been well established. In this study, the recombinant HBV preS2 single chain variable fragment (scFv) antibody was successfully expressed in E. coli with the novel cold shock vector (pCold) under the cspA promoter, and its expression level was compared with the pET vector under the T7 promoter. Additionally, a host with an oxidizing cytoplasm, E. coli trxB/gor double mutant, was used to improve the soluble expression. The anti-HBV preS2 scFv using pCold vector was successfully expressed in a soluble and functional form in both wild type and double mutant E. coli, while the scFv using the pET vector was expressed in an insoluble form in spite of using a double mutant providing an oxidizing environment. The induction with 0.05 mM IPTG showed a 2-fold higher functional expression compared to induction with 1 mM IPTG, and the functional expression at the induction temperature (15°C), which is optimal temperature for pCold vector, was improved 2-fold and 3- fold at 4 and 25°C, respectively. The efficacy of anti-HBV preS2 scFv for detecting HBV preS2 antigen was tested and verified by using Ni-decorated single-walled carbon nanotube (SWNT) field effect transistors.     

Regulated expression of heterologous genes inBacillus subtilis using the Tn10 encodedtet regulatory elements

Summary TheEscherichia coli-derivedtet regulatory elements from Tn10 have been used to construct vectors allowing the regulated, inducible, high-level expression of foreign genes inBacillus subtilis. While the wild-typetet promoters are inactive inB. subtilis, a synthetic mutanttet sequence with improved promoter consensus sequences and upstream poly A blocks shows activity inB. subtilis. The expression of an indicatorcat gene is inducible by sublethal amounts of tetracycline, indicating that the Tet repressor protein and thetet operator sequences are functional. However, the inducibility and maximal expression are not sufficient in this construct. To improve these properties atet operator sequence was placed between the —35 and —10 boxes of theB. subtilis-derived very strongxyl promoter. In the presence of atetR gene this construct is about 100-fold inducible and has high promoter strength, but some basal expression. This is avoided by placing a secondtet operator downstream resulting in no detectable basal expression at the expense of reduced inducibility. Using the system with a singletet operator inducible expression of glucose dehydrogenase fromB. megaterium was obtained at a very high level, and inducible expression of human single-chain urokinase-like plasminogen activator was achieved at the same level as inE. coli. Unlike inE. coli, the product was not degraded up to 4 h after induction inB. subtilis. These results demonstrate that the regulated expression vector described here should be very useful for production of foreign gene products fromB. subtilis cultures.     

Factors that influence the extracellular expression of streptavidin in <Emphasis Type="Italic">Escherichia coli</Emphasis> using a bacteriocin release protein

Aiming to increase production of recombinant streptavidin in Escherichia coli, the effect of different leader sequences, different promoter strengths of the bacteriocin release protein (kil), host strain and medium composition on the expression and secretion into the medium was investigated. Expression vectors containing an expression or secretion unit were constructed with different combinations of leader sequence for the streptavidin gene and promoters for the kil gene and streptavidin gene. Results showed that a high-level extracellular production of streptavidin could be accomplished with E. coli BL21(DE3) by using the leader sequence of the phoA gene, a strong stationary-phase promoter for the kil gene and supplementation of the medium by glycine. Using a stationary-phase promoter for the expression of streptavidin had a negative effect.     

Requirements for the high-level expression of murine interleukin-3 cDNA inEscherichia coli

Summary Murine interleukin-3 (Mu IL-3) cDNA was previously expressed inEscherichia coli using atac promoter and a constitutive high copy number plasmid vector. We found that significant increases in expression levels could be realized by using thetac promoter for the expression of Mu IL-3 in a plasmid vector possessing a temperature-inducible runaway-replicon. In contrast, use of anlpp promoter under similar conditions did not result in an increase in the Mu IL-3 expression level. Significant differences were observed when the expression levels of IL-3 were monitored in variousE. coli hosts having different genetic backgrounds. A mutant ofE. coli which lacks the protease La was found to increase the level of IL-3 produced. This report describes the effect of a specific protease-deficientE. coli host strain, as well as the effect of different promoters and plasmid replicons on the expression levels and stability of a heterologous gene product.     

Development of a Cold-Adapted Pseudoalteromonas Expression System for the Pseudoalteromonas Proteins Intractable for the Escherichia coli System

Although the Escherichia coli expression system is the most commonly used expression system, some proteins are still difficult to be expressed by this system, such as proteins with high thermolability and enzymes that cannot mature by autoprocessing. Therefore, it is necessary to develop alternative expression systems. In this study, a cold-adapted Pseudoalteromonas expression system was developed. A shuttle vector was constructed, and a conjugational transfer system between E. coli and psychrophilic strain Pseudoalteromonas sp. SM20429 was established. Based on the shuttle vector, three reporter vectors were constructed to compare the strength of the cloned promoters at low temperature. The promoter of xylanase gene from Pseudoalteromonas sp. BSi20429 was chosen due to its high activity at 10–15°C. An expression vector pEV containing the chosen promoter, multiple cloning sites and a His tag was constructed for protein expression and purification. With pEV as expression vector and SM20429 as the host, a cold-adapted protease, pseudoalterin, which cannot be maturely expressed in E. coli, was successfully expressed as an active extracellular enzyme when induced by 2% oat spelt xylan at 15°C for 48 h. Recombinant pseudoalterin purified from the culture by Ni affinity chromatography had identical N-terminal sequence, similar molecular mass and substrate specificity as the native pseudoalterin. In addition, another two cold-adapted enzymes were also successfully expressed by this system. Our results indicate that this cold-adapted Pseudoalteromonas expression system will provide an alternative choice for protein expression, especially for the Pseudoalteromonas proteins intractable for the E. coli system.     

Both the <Emphasis Type="Italic">AOX1</Emphasis> promoter and the <Emphasis Type="Italic">FLD1</Emphasis> promoter work together in a <Emphasis Type="Italic">Pichia pastoris</Emphasis> expression vector

We constructed a Pichia pastoris expression vector with two strongly inducible promoters (an alcohol oxidase 1 promoter and a formaldehyde dehydrogenase 1 promoter) based on pPIC9 k. To test the function of these promoters, the vector was used to co-express two genes that encode for green fluorescent protein (GFP) and a portion of a gelatin gene (an intra- and extracellular protein). The gelatin gene was placed under the control of PAOX1, while the GFP was under the control of PFLD1. The two proteins were simultaneously expressed upon induction with 0.5% (v/v) methanol. The two promoters functioned effectively and their coexistence on one vector did not affect their efficiency in protein expression. Thus, it was possible to simultaneously induce the expression of at least two proteins from one vector, using two different promoters.     

木糖异构酶基因xylA表达载体构建

以大肠埃希菌MG1655的基因组为模板,通过PCR扩增获得木糖异构酶基因xylA。利用敲除编码对基因转录起负调控作用的lacIq基因的大肠埃希菌/谷氨酸棒杆菌穿梭质粒pEC-XK99E,酶连后转化大肠埃希菌BL21和谷氨酸棒杆菌ATCC 13032。成功构建出了具有大肠埃希菌BL21表达活性的木糖异构酶表达载体pEC(lacI-)-xylA。     

Development of nitrilase promoter-derived inducible vectors for Streptomyces

An inducible expression vector, pSH19, which harbors regulatory expression system P_nitA-NitR, for streptomycetes was constructed previously. Here, we have modified pSH19 to obtain shuttle vectors for Streptomyces-E. coli by introducing the replication origin of a plasmid for E. coli (ColE1) and an antibiotic-resistant gene. Six inducible shuttle vectors, pESH19cF, pESH19cR, pESH19kF, pESH19kR, pESH19aF, and pESH19aR, for Streptomyces-E. coli, were successfully developed. The stability of these vectors was examined in five different E. coli strains and Streptomyces lividans TK24. The stability test showed that the pSH19-derived shuttle vectors were stable in E. coli Stbl2 and S. lividans TK24. Heterologous expression experiments involving each of the catechol 2,3-dioxygenase, nitrilase, and N-substituted formamide deformylase genes as a reporter gene showed that pESH19cF, pESH19kF, and pESH19aF possess inducible expression ability in S. lividans TK24. Thus, these vectors were found to be useful expression tools for experiments on both Gram-negative and Gram-positive bacterial genes.     

Methanol-based cadaverine production by genetically engineered Bacillus methanolicus strains

Methanol is regarded as an attractive substrate for biotechnological production of value-added bulk products, such as amino acids and polyamines. In the present study, the methylotrophic and thermophilic bacterium Bacillus methanolicus was engineered into a microbial cell factory for the production of the platform chemical 1,5-diaminopentane (cadaverine) from methanol. This was achieved by the heterologous expression of the Escherichia coli genes cadA and ldcC encoding two different lysine decarboxylase enzymes, and by increasing the overall L-lysine production levels in this host. Both CadA and LdcC were functional in B. methanolicus cultivated at 50°C and expression of cadA resulted in cadaverine production levels up to 500 mg l⁻¹ during shake flask conditions. A volume-corrected concentration of 11.3 g l⁻¹ of cadaverine was obtained by high-cell density fed-batch methanol fermentation. Our results demonstrated that efficient conversion of L-lysine into cadaverine presumably has severe effects on feedback regulation of the L-lysine biosynthetic pathway in B. methanolicus. By also investigating the cadaverine tolerance level, B. methanolicus proved to be an exciting alternative host and comparable to the well-known bacterial hosts E. coli and Corynebacterium glutamicum. This study represents the first demonstration of microbial production of cadaverine from methanol.     

The xylA promoter of Bacillus megaterium mediates constitutive gene expression in Escherichia coli

In the present study, we demonstrate that the Escherichia coli–Bacillus megaterium shuttle vector pHIS1522 can be used as a versatile expression vector. Recombinant genes under the control of the xylA promoter are constitutively expressed at a high level in E. coli strains, whereas their expression is strongly induced by the addition of xylose in B. megaterium. The utilization of D ‐xylose is known to be dependent on the xylAB genes in a number of bacteria. For B. megaterium a XylA‐based expression system was established that allows tightly regulated and highly efficient heterologous gene expression. The open reading frame (ORF) of the fluorescent protein turboRFP was cloned under the control of the xylA promoter of B. megaterium in the shuttle vector pHIS1522. Unexpectedly, tRFP expression was not only observed in B. megaterium, but also in E. coli. Based on fluorescence measurements and Western blot analysis, expression was comparable or slightly higher compared with the commonly used pET vectors. Therefore, pHIS1522 can be used as a versatile expression vector in both, B. megaterium and E. coli.     

The upstream region of the isocitrate lyase gene (UPR-ICL) of Candida tropicalis induces gene expression in both Saccharomyces cerevisiae and Escherichia coli by acetate via two distinct promoters

The upstream region of the isocitrate lyase gene (UPR-ICL, 1530bp) of an n-alkane-utilizable yeast, Candida tropicalis, induced gene expression in another yeast, Saccharomyces cerevisiae, when the yeasts were grown on acetate. Surprisingly, UPR-ICL displayed the same regulatory function in the bacterium Escherichia coli when grown on acetate. We determined the interesting nucleotide sequence of UPR-ICL. The deletion analysis of UPR-ICL in both cells revealed the presence of two distinct promoters: one was localized at-394 to-379 and regulated gene expression in S. cerevisiae; the other was tocated near the initiation codon and regulated gene expression in E. coli. The two promoter sequences were similar, but not identical to regulatory elements that have been previously reported in S. cerevisiae and E. coli, respectively. Accordingly, the possibility of novel regulatory mechanisms could not be excluded. This is an interesting example of the presence of distinct cis-acting regulatory elements responsible for the induction of gene expression in one gene by acetate in both S. cerevisiae and E. coli. Preservation of such promoters through evolution is also discussed.Abbreviations ICL Isocitrate lyase - UPR-ICL Upstream region of the Candida tropicalis isocitrate lyase gene     

Identification and characterization of Clostridium difficile promoter element that is functional in Escherichia coli

The promoter element involved in the expression of a previously characterized cloned clostridial antigen was isolated and characterized. A restriction fragment containing the promoter element of the Clostridium difficile insert was cloned using the promoter probe vector, pGA46. Subclones of the clostridial DNA insert in pGA46 were then analyzed by nucleotide sequencing and by S1 nuclease experiments. The clostridial promoter element exhibits a high degree of homology with typical Escherichia coli promoter elements. This sequence probably represents a unique class of clostridial promoter elements which, given their ability to function in E. coli and C. difficile, can be used in the construction of a shuttle vector capable of gene expression in E. coli and C. difficile.     

A novel bicistronic vector for overexpressing Mycobacterium tuberculosis proteins in Escherichia coli

A putative DNA glycosylase encoded by the Rv3297 gene (MtuNei2) has been identified in Mycobacterium tuberculosis. Our efforts to express this gene in Escherichia coli either by supplementing tRNAs for rare codons or optimizing the gene with preferred codons for E. coli resulted in little or no expression. On the other hand, high-level expression was observed using a bicistronic expression vector in which the target gene was translationally coupled to an upstream leader sequence. Further comparison of the predicted mRNA secondary structures supported the hypothesis that mRNA secondary structure(s) surrounding the translation initiation region (TIR), rather than codon usage, played the dominant role in influencing translation efficiency, although manipulation of codon usage or tRNA supplementation did further enhance expression in the bicistronic vector. Addition of a cleavable N-terminal tag also facilitated gene expression in E. coli, possibly through a similar mechanism. However, since cleavage of N-terminal tags is determined by the amino acid at the P₁′ position downstream of the protease recognition sequence and results in the addition of an extra amino acid in front of the N-terminus of the protein, this strategy is not particularly amenable to Fpg/Nei family DNA glycosylases which carry the catalytic proline residue at the P₁′ position and require a free N-terminus. On the other hand, the bicistronic vector constructed here is potentially valuable particularly when expressing proteins from G/C rich organisms and when the proteins carry proline residues at the N-terminus in their native form. Thus the bicistronic expression system can be used to improve translation efficiency of mRNAs and achieve high-level expression of mycobacterial genes in E. coli.