A novel cold-adapted lipase from <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. XMZ-26: gene cloning and characterisation

Acinetobacter sp. XMZ-26 (ACCC 05422) was isolated from soil samples obtained from glaciers in Xinjiang Province, China. The partial nucleotide sequence of a lipase gene was obtained by touchdown PCR using degenerate primers designed based on the conserved domains of cold-adapted lipases. Subsequently, a complete gene sequence encoding a 317 amino acid polypeptide was identified. Our novel lipase gene, lipA, was overexpressed in Escherichia coli. The recombinant protein (LipA) was purified by Ni-affinity chromatography, and then deeply characterised. The LipA resulted to hydrolyse pNP esters of fatty acids with acyl chain length from C2 to C16, and the preferred substrate was pNP octanoate showing a k _cat = 560.52 ± 28.32 s⁻¹, K _m = 0.075 ± 0.008 mM, and a k _cat/K _m = 7,377.29 ± 118.88 s⁻¹ mM⁻¹. Maximal LipA activity was observed at a temperature of 15°C and pH 10.0 using pNP decanoate as substrate. That LipA peaked at such a low temperature and remained most activity between 5°C and 35°C indicated that it was a cold-adapted enzyme. Remarkably, this lipase retained much of its activity in the presence of commercial detergents and organic solvents, including Ninol, Triton X-100, methanol, PEG-600, and DMSO. This cold-adapted lipase may find applications in the detergent industry and organic synthesis.     

Characterization of a cold-active lipase from Psychrobacter cryohalolentis K5T and its deletion mutants

A gene coding for cold-active lipase from the psychrotrophic Gram-negative bacterium Psychrobacter cryohalolentis K5^T isolated from a Siberian cryopeg has been cloned and expressed in Escherichia coli. The recombinant protein Lip1Pc with a 6× histidine tag at its C-terminus was purified by nickel affinity chromatography. With p-nitrophenyl dodecanoate (C12) as a substrate, the purified recombinant protein displayed maximum lipolytic activity at 25°C and pH 8.0. Increasing the temperature above 40°C and addition of various metal ions and organic solvents inhibited the enzymatic activity of Lip1Pc. Most nonionic detergents, such as Triton X-100 and Tween 20, slightly increased the lipase activity, while SDS completely inhibited it. To investigate the functional significance of the Lip1Pc N-terminal domain, we constructed five deletion mutants of this protein. The ND1 and ND2 mutants displayed specific activity reduced by 30–35%, while other truncated proteins were completely inactive. Both mutants demonstrated increased activity towards p-nitrophenyl decanoate (C10) and impaired utilization of C16 substrate. Although optimum reaction temperature of ND2 lowered to 20°C, it displayed enhanced stability by 44% after incubation at 40°C. The results prove that the N-terminal domain of Lip1Pc has a fundamental impact on the activity and stability of the protein.     

Cloning and expression of gene, and activation of an organic solvent-stable lipase from Pseudomonas aeruginosa LST-03

Organic solvent-tolerant Pseudomonas aeruginosa LST-03 secretes an organic solvent-stable lipase, LST-03 lipase. The gene of the LST-03 lipase (Lip9) and the gene of the lipase-specific foldase (Lif9) were cloned and expressed in Escherichia coli. In the cloned 2.6 kbps DNA fragment, two open reading frames, Lip9 consisting of 933 nucleotides which encoded 311 amino acids and Lif9 consisting of 1,020 nucleotides which encoded 340 amino acids, were found. The overexpression of the lipase gene (lip9) was achieved when T7 promoter was used and the signal peptide of the lipase was deleted. The expressed amount of the lipase was greatly increased and overexpressed lipase formed inclusion body in E. coli cell. The collected inclusion body of the lipase from the cell was easily solubilized by urea and activated by using lipase-specific foldase of which 52 or 58 amino acids of N-terminal were deleted. Especially, the N-terminal methionine of the lipase of which the signal peptide was deleted was released in E. coli and the amino acid sequence was in agreement with that of the originally-produced lipase by P. aeruginosa LST-03. Furthermore, the overexpressed and solubilized lipase of which the signal peptide was deleted was more effectively activated by lipase-specific foldase.     

lip2, a novel lipase gene cloned from Aspergillus niger exhibits enzymatic characteristics distinct from its previously identified family member

We have cloned a novel lipase gene, lip2, from Aspergillus niger and expressed it in Escherichia coli. Upon purification of the recombinant Lip2 protein, its properties were characterized. In comparison with a previously identified lipase Lip1, both enzymes are acid lipases (optimal pH <6.5), Ca²⁺-dependent and PMSF-sensitive, but have different molecular weights (35 and 43 kDa), optimal substrate spectra (C10 and C8), optimal reaction temperatures (45 and 50°C) and thermal stability. Circular dichroism spectroscopy revealed that Lip2 contains a typical Ca²⁺-active site. This first report on the cloning of the Lip2 gene and its enzymatic characteristics may greatly facilitate its potential industrial application.     

Expression and characterization of Ca2+-independent lipase from Bacillus pumilus B26

A lipase-producing Bacillus pumilus strain (B26) was isolated from a soil sample collected in Korea. The cloned gene showed that the lipase B26 composed of a 34-amino-acid signal sequence and a 181-amino-acid mature part corresponding to a molecular mass (M_r) of 19,225. Based on the M_r and the protein sequence, the lipase B26 belongs to the lipase family I.4. The optimum temperature and pH of the purified enzyme were 35 °C and 8.5, respectively. The lipase B26 showed a ‘Ca²⁺-independent thermostability and catalytic activity’. These are novel properties observed for the first time in lipase B26 among all bacterial lipases and correspond with the suggestion that this enzyme had no Ca²⁺-binding motif around the catalytic His156 residue. This enzyme seems to be a true lipase based on the experimental results that it could hydrolyze various long-chain triglycerides (C₁₄–C₁₈) and triolein (C_18:1) and that it showed a typical interfacial activation mechanism toward both tripropionin and p-nitrophenyl butyrate.     

Characterization of an extracellular lipase from the biocontrol fungus, Nomuraea rileyi MJ, and its toxicity toward Spodoptera litura

An extracellular lipase from Nomuraea rileyi MJ was purified 23.9-fold with 1.69% yield by ammonium sulfate precipitation followed by Sephacryl S-100 HR column chromatography. By mass spectrometry and SDS-polyacrylamide gel electrophoresis, the molecular weight of the homogenous lipase was 81 kDa. The N-terminal sequence was determined as LeuSerValGluGlnThrLysLeuSerLysLeuAlaTyrAsnAsp and it showed no homology to sequences of known lipases. The optimum pH and temperature for activity were 8.0 and 35 °C, respectively. The enzyme was stable in the pH range 7.0-9.0 and at 15-35 °C for 1 h. Higher activity was observed in the presence of surfactants, Na⁺, NH₄⁺ ions, NaN₃ and ethylenediaminetetraacetic acid (EDTA), while Co²⁺ and Cu²⁺ ions, cysteine and dithiothreitol (DTT) strongly inhibited activity. The purified lipase hydrolyzed both synthetic and natural triglycerides with maximum activity for trilaurin and coconut oil, respectively. It also hydrolyzed esters of p-nitrophenol (pNP) with highest activity for p-nitrophenyl caprate (pNPCA). The purified lipase was found to promote N. rileyi spore germination in vitro in that germination reached 98% in conidial suspensions containing purified lipase at 2.75 U. Moreover, it enhanced toxicity of N. rileyi toward Spodoptera litura larvae with mortality via topical application reaching 63.3% at 4-10 days post-treatment which calculated to be 2.7 times higher than the mortality obtained using conidial suspensions alone.     

Gene cloning,expression and characterization of a cold-adapted lipase from a psychrophilic deep-sea bacterium Psychrobacter sp. C18

A psychrophilic bacterium Psychrobacter sp. C18 previously isolated from the Southern Okinawa Trough deep-sea sediments showed extracellular lipolytic activity towards tributyrin. A genomic DNA library was constructed and screened to obtain the corresponding lipase gene. The sequenced DNA fragment contains an open reading frame of 945 bp, which was denoted as the lipX gene, from which a protein sequence LipX was deduced of 315 amino acid residues with a molecular mass of 35,028 Da. This protein contained the bacterial lipase GNSMG (GxSxG, x represents any amino acid residue) and HG consensus motifs. The recombinant pET28a(+)/lipX gene was overexpressed in heterologous host Escherichia coli BL21 (DE3) cells to overproduce the lipase protein LipX_His with a 6× histidine tag at its C-terminus. Nickel affinity chromatography was used for purification of the expressed recombinant lipase. The maximum lipolytic activity of the purified recombinant lipase was obtained at temperature of 30°C and pH 8.0 with p-nitrophenyl myristate (C14) as a substrate. Thermostability assay indicated that the recombinant LipX_His is a cold-adapted lipase, which was active in 10% methanol, ethanol, acetone and 30% glycol, and inhibited partially by Zn²⁺, Co²⁺, Mn²⁺, Fe³⁺ and EDTA. Most non-ionic detergents, such as DMSO, Triton X-100, Tween 60 and Tween 80 enhanced the lipase activity but 1% SDS completely inhibited the enzyme activity. Additionally, the highest lipolytic rate of the recombinant LipX_His lipase was achieved when p-nitrophenyl myristate was used as a substrate, among all the p-nitrophenyl esters tested.     

Novel Strategy of Using Methyl Esters as Slow Release Methanol Source during Lipase Expression by mut+ Pichia pastoris X33

One of the major issues with heterologous production of proteins in Pichia pastoris X33 under AOX1 promoter is repeated methanol induction. To obviate repeated methanol induction, methyl esters were used as a slow release source of methanol in lipase expressing mut⁺ recombinant. Experimental design was based on the strategy that in presence of lipase, methyl esters can be hydrolysed to release their products as methanol and fatty acid. Hence, upon break down of methyl esters by lipase, first methanol will be used as a carbon source and inducer. Then P. pastoris can switch over to fatty acid as a carbon source for multiplication and biomass maintenance till further induction by methyl esters. We validated this strategy using recombinant P. pastoris expressing Lip A, Lip C from Trichosporon asahii and Lip11 from Yarrowia lipolytica. We found that the optimum lipase yield under repeated methanol induction after 120 h was 32866 U/L, 28271 U/L and 21978 U/L for Lip C, Lip A and Lip 11 respectively. In addition, we found that a single dose of methyl ester supported higher production than repeated methanol induction. Among various methyl esters tested, methyl oleate (0.5%) caused 1.2 fold higher yield for LipA and LipC and 1.4 fold for Lip11 after 120 h of induction. Sequential utilization of methanol and oleic acid by P. pastoris was observed and was supported by differential peroxisome proliferation studies by transmission electron microscopy. Our study identifies a novel strategy of using methyl esters as slow release methanol source during lipase expression.     

Refolding,purification and characterization of an organic solvent-tolerant lipase from Serratia marcescens ECU1010

Expression of recombinant proteins as inclusion bodies in bacteria is one of the most efficient ways to produce cloned proteins, as long as the inclusion bodies can be successfully refolded. In this study, the different parameters were investigated and optimized on the refolding of denatured lipase. The maximum lipase activity of 5000 U/L was obtained after incubation of denatured enzyme in a refolding buffer containing 20 mM Tris–HCl (pH 7.0), 1 mM Ca²⁺ at 20 °C. Then, the refolded lipase was purified to homogeneity by anion exchange chromatography. The purified refolded lipase was stable in broad ranges of temperatures and pH values, as well as in a series of water-miscible organic solvents. In addition, some water-immiscible organic solvents, such as petroleum ether and isopropyl ether, could reduce the polarity and increase the nonpolarity of the refolding system. The results of Fourier transform infrared (FT-IR) microspectroscopy were the first to confirm that lipase refolding could be further improved in the presence of organic solvents. The purified refolded lipase could enantioselectively hydrolyze trans-3-(4-methoxyphenyl) glycidic acid methyl ester [(±)-MPGM]. These features render the lipase attraction for biotechnological applications in the field of organic synthesis and pharmaceutical industry.     

Cloning,expression, and characterization of Aureobasidium melanogenum lipase in Pichia pastoris

cDNA of Aureobasidium melanogenum lipase comprises 1254 bp encoding 417 amino acids, whereas genomic DNA of lipase comprises 1311 bp with one intron (57 bp). The lipase gene contains a putative signal peptide encoding 26 amino acids. The A. melanogenum lipase gene was successfully expressed in Pichia pastoris. Recombinant lipase in an inducible expression system showed the highest lipase activity of 3.8 U/mL after six days of 2% v/v methanol induction. The molecular mass of purified recombinant lipase was estimated as 39 kDa using SDS-PAGE. Optimal lipase activity was observed at 35–37 °C and pH 7.0 using p-nitrophenyl laurate as the substrate. Lipase activity was enhanced by Mg²⁺, Mn²⁺, Li⁺, Ca²⁺, Ni²⁺, CHAPS, DTT, and EDTA and inhibited by Hg²⁺, Ag⁺, SDS, Tween 20, and Triton X-100. The addition of 10% v/v acetone, DMSO, p-xylene, and octanol increased lipase activity, whereas that of propanol and butanol strongly inhibited it.     

Characterization of a spore surface lipase from the biocontrol agent Metarhizium anisopliae

A Metarhizium anisopliae spore surface lipase (MASSL) strongly bound to the fungal spore surface has been purified by ion exchange chromatography on DEAE sepharose followed by ultrafiltration and hydrophobic interaction chromatography on phenyl sepharose. Electrophoretic analyses showed that the molecular weight of this lipase is ～66 kDa and pI is 5.6. Protein sequencing revealed that identified peptides in MASSL shared identity with several lipases or lipase-related sequences. The enzyme was able to hydrolyze triolein, the animal lipid cholesteryl stearate and all ρNP ester substrates tested with some preference for esters with a short acyl chain. The values of K_m and V_max for the substrates ρNP palmitate and ρNP laurate were respectively 0.474 mM and 1.093 mMol min^?1 mg^?1 and 0.712 mM and 5.696 mMol min^?1 mg^?1. The optimum temperature of the purified lipase was 30 °C and the enzyme was most stable within the most acid pH range (pH 3–6). Triton X-100 increased and SDS reduced enzyme lipolytic activity. MASSL activity was stimulated by Ca²⁺, Mg²⁺ and Co²⁺ and inhibited by Mn²⁺. The inhibitory effect on activity exerted by EDTA and EGTA was limited, while the lipase inhibitor Ebelactone B completely inhibited MASSL activity as well as PMSF. Methanol 0.5% apparently did not affect MASSL activity while β-mercaptoethanol activated the enzyme.     

Comparative biochemical characterization and in silico analysis of novel lipases Lip11 and Lip12 with Lip2 from Yarrowia lipolytica

Novel lipases lip11 and lip12 from Yarrowia lipolytica MSR80 were cloned and expressed in E. coli HB101 pEZZ18 system along with lip2. These enzymes were constitutively expressed as extracellular proteins with IgG tag. The enzymes were purified by affinity chromatography and analyzed by SDS-PAGE with specific activity of 314, 352 and 198?U/mg for Lip2, Lip11 and Lip12, respectively on olive oil. Biochemical characterization showed that all were active over broad range of pH 4.0?C9.0 and temperature 20?C80?°C with optima at pH 7 and 40?°C. All the three lipases were thermostable up to 80?°C with varying t_1/2. Activity on various substrates revealed that they were most active on oils?>?triacylglycerides?>?p-np-esters. Relatively Lip2 and Lip11 showed specificity for mid to long chain fatty acids, while Lip12 was mid chain specific. GC analysis of triolein hydrolysis by these lipases revealed that Lip2 and Lip11 are regioselective, while Lip12 is not. Effect of metal ions showed that Lip2 and Lip12 were activated by Ca²⁺ whereas Lip11 by Mg²⁺. All were thiol activated and inhibited by PMSF and N-bromosuccinimide. All were activated by non polar solvents and inhibited by polar solvents. Detailed sequence analysis and structural predictions revealed Lip11 and Lip12 shared 61 and 62?% homology with Lip2 (3O0D) and three dimensional superimposition revealed Lip2 was closer to Lip11 than to Lip12 as was observed during biochemical characterization. Finally, thermostability and substrate specificity has been explained on the basis of detailed amino acid analysis.     

Overexpression of Candida rugosa lipase Lip1 via combined strategies in Pichia pastoris

In this study, combined strategies were employed to heterologously overexpress Candida rugosa lipase Lip1 (CRL1) in a Pichia pastoris system. The LIP1 gene was systematically codon-optimized and synthesized in vitro. The Lip1 activity of a recombinant strain harboring three copies of the codon-optimized LIP1 gene reached 1200 U/mL in a shake flask culture. Higher lipase activity, 1450 U/mL, was obtained using a five copy number construct. Co-expressing one copy of the ERO1p and BiP chaperones with Lip1p, the CRL1 lipase yield further reached 1758 U/mL, which was significantly higher than that achieved by expressing Lip1p alone or only co-expressing one molecular chaperone. When cultivated in a 3 L fermenter under optimal conditions, the recombinant strain GS115/87-ZA-ERO1p-BiP #7, expressing the molecular chaperones Ero1p and BiP, produced 13,490 U/mL of lipase activity at 130 h, which was greater than the 11,400 U/mL of activity for the recombinant strain GS115/pAO815-α-mCRL1 #87, which did not express a molecular chaperone. This study indicates that a strategy of combining codon optimization with co-expression of molecular chaperones has great potential for the industrial-scale production of pure CRL1.     

A d-glucose- and d-xylose-tolerant GH1 β-glucosidase from Cellulosimicrobium funkei HY-13, a fibrolytic gut bacterium of Eisenia fetida

The GluM gene (1491-bp) coding for a β-glucosidase comprising a single catalytic glycoside hydrolase family 1 domain from an earthworm (Eisenia fetida)-symbiotic bacterium, Cellulosimicrobium funkei HY-13, was cloned and over-expressed in Escherichia coli BL21. The recombinant histidine-tagged enzyme (rGluM: 56 kDa) displayed the highest cleavage activity toward p-nitrophenyl (pNP)-β-d-glucopyranoside at pH 5.0 and 40 °C. The β-glucosidase activity of rGluM was enhanced over 1.8-fold of its original activity in the presence of 1 mM Ca²⁺, Ni²⁺, Mn²⁺, and Co²⁺ ions, respectively, while it was highly sensitive to 5 mM N-bromosuccinimide and 1 mM Hg²⁺. The susceptibility of some pNP-sugar derivatives and d-cellobiose to rGluM was evaluated to be in the order of pNP-β-d-glucopyranoside > pNP-β-d-galactopyranoside > d-cellobiose > pNP-β-d-cellobioside > pNP-β-d-mannopyranoside. The k_cat/K_m values of rGluM toward pNP-β-d-glucopyranoside, pNP-β-d-galactopyranoside, and d-cellobiose were 302.28, 179.73, and 6.40 mM^-1 s^-1, respectively. At a concentration below 1.0 M, d-galactose was a potent activator of rGluM with β-glucosidase activity enhanced by approximately 160% in a dose-dependent manner. Moreover, the d-glucose (< 400 mM) and d-xylose (≤ 700 mM) stimulation of rGluM suggests that it can be exploited as a potential biocatalyst to generate d-glucose molecules in d-cellobiose degradation.     

Enzymatic Characterization of Refolded Human Rhinovirus Type 14 2A Protease Expressed in Escherichia coli

Reported here is the production of recombinant human rhinovirus 14 (HRV14) 2A protease from bacterial cells transformed with a heat-inducible plasmid containing the HRV14 2A cDNA sequence. Overexpressed 2A protein partitioned into the inclusion bodies was solubilized in urea and then refolded in the presence of Zn²⁺. Transition metals were required for the restoration of 2A protease activity as a structural component, but appeared to be inhibitory if added exogenously once the enzyme was refolded. Based on the cleavage specificity studies, a colorimetric assay was developed for the highly purified HRV14 2A protease. A peptide with the sequence RKGDIKSY–p-nitroanilide was found to be cleaved by the 2A protease with a k_cat/K_m ratio of ~335 M⁻¹s⁻¹, which allows its activity to be measured continuously with a spectrophotometer or a microplate reader.     

Engineering of Yarrowia lipolytica lipase Lip8p by circular permutation to alter substrate and temperature characteristics

Applications of lipases are mainly based on their catalytic efficiency and substrate specificity. In this study, circular permutation (CP), an unconventional protein engineering technique, was employed to acquire active mutants of Yarrowia lipolytica lipase Lip8p. A total of 21 mutant lipases exhibited significant shifts in substrate specificity. Cp128, the most active enzyme mutant, showed higher catalytic activity (14.5-fold) and higher affinity (4.6-fold) (decreased K _m) to p-nitrophenyl-myristate (pNP-C₁₄) than wild type (WT). Based on the three-dimensional (3D) structure model of the Lip8p, we found that most of the functional mutation occurred in the surface-exposed loop region in close proximity to the lid domain (S112–F122), which implies the steric effect of the lid on lipase activity and substrate specificity. The temperature properties of Cp128 were also investigated. In contrast to the optimal temperature of 45 °C for the WT enzyme, Cp128 exhibited the maximal activity at 37 °C. But it is noteworthy that there is no change in thermostability.     

Cloning,expression and characterization of a lipase gene (<Emphasis Type="Italic">lip3</Emphasis>) from<Emphasis Type="Italic"> Pseudomonas aeruginosa</Emphasis> LST-03

A lipase gene (lip3) was cloned from the Pseudomonas aeruginosa strain LST-03 (which tolerates organic solvents) and expressed in Escherichia coli. The cloned sequence includes an ORF consisting of 945 nucleotides, encoding a protein of 315 amino acids (Lip3 lipase, 34.8 kDa). The predicted Lip3 lipase belongs to the class of serine hydrolases; the catalytic triad consists of the residues Ser-137, Asp-258, and His-286. The gene cloned in the present study does not encode the LST-03 lipase, a previously isolated solvent-stable lipase secreted by P. aeruginosa LST-03, because the N-terminal amino acid sequence of the Lip3 lipase differs from that of the LST-03 lipase. Although the effects of pH on the activity and stability of the Lip3 lipase, and the temperature optimum of the enzyme, were similar to those of the LST-03 lipase, the relative activity of the Lip3 lipase at lower temperatures (0–35°C) was higher than that of the LST-03 lipase. In the absence of organic solvents, the half-life of the Lip3 lipase was similar to that of the LST-03 lipase. However, in the presence of most of the organic solvents tested in this study (the exceptions were ethylene glycol and glycerol), the stability of the Lip3 lipase was lower than that of the LST-03 lipase.Communicated by H. Ikeda     

Disulfide bond in Pseudomonas aeruginosa lipase stabilizes the structure but is not required for interaction with its foldase

Pseudomonas aeruginosa secretes a 29-kDa lipase which is dependent for folding on the presence of the lipase-specific foldase Lif. The lipase contains two cysteine residues which form an intramolecular disulfide bond. Variant lipases with either one or both cysteines replaced by serines showed severely reduced levels of extracellular lipase activity, indicating the importance of the disulfide bond for secretion of lipase through the outer membrane. Wild-type and variant lipase genes fused to the signal sequence of pectate lyase from Erwinia carotovora were expressed in Escherichia coli, denatured by treatment with urea, and subsequently refolded in vitro. Enzymatically active lipase was obtained irrespective of the presence or absence of the disulfide bond, suggesting that the disulfide bond is required neither for correct folding nor for the interaction with the lipase-specific foldase. However, cysteine-to-serine variants were more readily denatured by treatment at elevated temperatures and more susceptible to proteolytic degradation by cell lysates of P. aeruginosa. These results indicate a stabilizing function of the disulfide bond for the active conformation of lipase. This conclusion was supported by the finding that the disulfide bond function could partly be substituted by a salt bridge constructed by changing the two cysteine residues to arginine and aspartate, respectively.     

Cloning, expression and characterization of a novel esterase from Bacillus pumilus

The gene encoding esterase (CE1) from Bacillus pumilus ARA with a calculated molecular weight of 28.4 kDa was cloned, sequenced and efficiently expressed in Escherichia coli. The open reading frame of 747 nucleotides encoded a protein, which was classified as a carboxylesterase with an identity of 87 % to esterase from Bacillus subtilis 168. Recombinant CE1 was purified in a single step to electrophoretic homogeneity by IMAC (Ni²⁺). The enzyme displayed maximum activity toward p-nitrophenyl (pNP) acetate at 37–40 °C and pH?6.5–7.0. It was stable in the pH range from 6.5 to 8.0, and at temperature from 25 to 40 °C. Among four p-nitrophenyl esters tested, the best substrate was pNP acetate with K _m and k _cat values of 0.33 mM and 4.07 s^?1, respectively. Amounts of 2 mM Ca²⁺ and Co²⁺ significantly increased the esterase activity to 190 and 121 %, respectively. These results suggest that CE1 has very attractive applications of increasing feed digestibility in animal nutrition in this moderate temperature range.     

Production and activity of extracellular lipase from Luteibacter sp.

Microbial lipases are widely used in industrial applications due to their versatility, and the characterization of new lipase-producing microorganisms could provide new sources of these enzymes, with different specificities and better activities. In this context, we have improved lipase production by Luteibacter sp. by using basal medium supplemented with 2 % olive oil, a pH of 6 and a growth temperature of 37 °C. The enzyme extraction process with the addition of 0.25 % Tween 80 increased lipase activity. Implementation of these modifications increased lipase activity by approximately 430 %. The lipase activities produced in the culture supernatant (LCS) and extracted with Tween 80 (LCST80) were characterized. Both extracts hydrolyzed ρ-nitrophenyl (ρNP) esters with different acyl chain lengths, with a preference for short acyl lengths, and had optimum activity at 45 °C. The LCS was stable at acidic and alkaline pH, but LCST80 was only stable at alkaline pH. Methanol, SDS, Triton X-100, EDTA, and EGTA did not affect lipase activity, while divalent cations (Ca²⁺, Zn²⁺, Mg²⁺) - with the exception of Co²⁺— increased lipase activity. Both extracts showed transesterification activity on ρNP ester substrates, and both were able to hydrolyze different natural lipids. The characterization of lipase produced by Luteibacter sp. introduces this recently described genus as a new source of lipases with great biotechnological potential.