Cyanine dyes for the detection of double stranded DNA

Twenty three novel cyanine dyes have been applied as fluorescent stains for the detection of nucleic acids in agarose gel electrophoresis. Significant fluorescence enhancement of these dyes in the presence of double stranded DNA was observed. Five dyes offered superior sensitivity in the detection and quantification of DNA, over Ethidium Bromide, the most commonly used nucleic acid stain.     

Interaction of cyanine dyes with nucleic acids. Part 19: new method for the covalent labeling of oligonucleotides with pyrylium cyanine dyes

New chemistry for the fluorescent labeling of oligonucleotides with cyanine dyes is proposed. It is based on the use of pyrylium salts as amine-specific reagents. Monomethyne pyrylium cyanine dye 1 was covalently linked to 5'-aminoalkyl modified oligonucleotide, with simultaneous conversion of the non-fluorescent dye 1 into fluorescent pyridinium cyanine structure 2.     

Symmetric cyanine dyes for detecting nucleic acids

A novel approach to the design of sensitive fluorescent probes for nucleic acids detection is proposed. Suitable modifications of tri- and pentamethine cyanine dyes in the polymethine chain and/or in the heterocyclic residues can result in a significant decrease in unbound dye fluorescence intensity and an increase in dye emission intensity in the presence of DNA compared to the unsubstituted dye. The sharp enhancement in the fluorescence intensity upon dye interaction with double-stranded DNA permits the application of the modified tri- and pentamethine dyes as fluorescent probes in double-stranded DNA detection in homogeneous assays.     

Cyanine dye-protein interactions: looking for fluorescent probes for amyloid structures

We ascertained the ability to detect fibrillar beta-lactoglobulin (BLG) of a series of mono-, tri-, penta-, and heptamethinecyanines based on benzothiazole and benzimidazole heterocycles, and of benzothiazole squaraine. Fluorescence properties of these cyanine dyes were measured in the unbound state and in the presence of monomeric and fibrillar BLG and compared with those for the commercially available benzothiazole dye Thioflavin T. The correlation between the chemical nature of the dye molecules and the ability of dyes to bind aggregated proteins was established. We found that meso-substituted cyanines with amino substituents in heterocycle in contrast to the corresponding unsubstituted dyes have a binding preference to fibrillar BLG and a noticeable fluorescence response in the presence of the aggregated protein. For the squaraines and benzimidazole penthamethinecyanines studied, fluorescence emission increased both in the presence of native and fibrillar protein. The trimethinecyanines T-49 and SH-516 exhibit specifically increased fluorescence in the presence of fibrillar BLG. These dyes demonstrated the same or higher emission intensity and selectivity to aggregated BLG as Thioflavin T, and are proposed for application in selective fluorescent detection of aggregated proteins.     

Specific fluorescent detection of fibrillar alpha-synuclein using mono- and trimethine cyanine dyes

With the aim of searching of novel amyloid-specific fluorescent probes the ability of series of mono- and trimethine cyanines based on benzothiazole, pyridine and quinoline heterocycle end groups to recognize fibrillar formations of alpha-synuclein (ASN) was studied. For the first time it was revealed that monomethine cyanines can specifically increase their fluorescence in aggregated ASN presence. Dialkylamino-substituted monomethine cyanine T-284 and meso-ethyl-substituted trimethine cyanine SH-516 demonstrated the higher emission intensity and selectivity to aggregated ASN than classic amyloid stain Thioflavin T, and could be proposed as novel efficient fluorescent probes for fibrillar ASN detection. Studies of structure-function dependences have shown that incorporation of amino- or diethylamino- substituents into the 6-position of the benzothiazole heterocycle yields in a appearance of a selective fluorescent response to fibrillar alpha-synuclein presence. Performed calculations of molecular dimensions of studied cyanine dyes gave us the possibility to presume, that dyes bind with their long axes parallel to the fibril axis via insertion into the neat rows (so called 'channels') running along fibril.     

The fluorescent dyes TO-PRO-3 and TOTO-3 iodide allow detection of microbial cells in soil samples without interference from background fluorescence

Visualization of microorganisms in soils and sediments using fluorescent dyes is a common method in microbial ecology studies, but is often hampered by strong nonspecific background fluorescence that can mask genuine cellular signals. The cyanine nucleic acid binding dyes TO-PRO-3 and TOTO-3 iodide enabled a clear detection of microbial cells in a mineral soil, while nonspecific background was greatly reduced compared with commonly used dyes. When used as counterstains for fluorescence in situ hybridization (FISH), both cyanine dyes allowed identification of microbial cells despite strong background from nonspecifically bound probes. TO-PRO-3 and TOTO-3 are easy to use and represent superior alternatives for detecting microorganisms in soil environments.     

Trimethine cyanine dyes as fluorescent probes for amyloid fibrils: The effect of N,N′-substituents

The effect of various N,N′-substituents in the molecule of benzothiazole trimethine cyanine dye on its ability to sense the amyloid aggregates of protein was studied. The dyes are low fluorescent when free and in the presence of monomeric proteins, but their emission intensity sharply increases in complexes with aggregated insulin and lysozyme, with the fluorescence quantum yield reaching up to 0.42.     

Postcolumn nucleic acid intercalation for the fluorescent detection of nucleic acids using ion pair reverse phase high-performance liquid chromatography

Here we report a simple and effective procedure enabling the fluorescent detection of nucleic acids following the rapid, high-resolution separation using ion pair reverse phase chromatography. This approach uses postcolumn nucleic acid intercalation of fluorescent dyes with subsequent fluorescent detection, demonstrating more than a 1000-fold increase in sensitivity in the detection of nucleic acids when compared with traditional UV detection. Moreover, a wide range of intercalating dyes can be incorporated, including those known to disrupt the structure of the nucleic acids, thereby enabling the sensitive detection of DNA and RNA with no adverse effect on resolution of the nucleic acids during ion pair reverse phase chromatography. In addition, such approaches allow one to readily distinguish single-stranded DNA from double-stranded DNA following their separation using ion pair reverse phase high-performance liquid chromatography.     

Comparison of the Sequence-Dependent Fluorescence of the Cyanine Dyes Cy3, Cy5, DyLight DY547 and DyLight DY647 on Single-Stranded DNA

Cyanine dyes are commonly used for fluorescent labeling of DNA and RNA oligonucleotides in applications including qPCR, sequencing, fluorescence in situ hybridization, Förster resonance energy transfer, and labeling for microarray hybridization. Previous research has shown that the fluorescence efficiency of Cy3 and Cy5, covalently attached to the 5′ end of single-stranded DNA, is strongly sequence dependent. Here, we show that DY547 and DY647, two alternative cyanine dyes that are becoming widely used for nucleic acid labeling, have a similar pattern of sequence-dependence, with adjacent purines resulting in higher intensity and adjacent cytosines resulting in lower intensity. Investigated over the range of all 1024 possible DNA 5mers, the intensities of Cy3 and Cy5 drop by ∼50% and ∼65% with respect to their maxima, respectively, whereas the intensities of DY547 and DY647 fall by ∼45% and ∼40%, respectively. The reduced magnitude of change of the fluorescence intensity of the DyLight dyes, particularly of DY647 in comparison with Cy5, suggests that these dyes are less likely to introduce sequence-dependent bias into experiments based on fluorescent labeling of nucleic acids.     

A helicase assay based on the displacement of fluorescent, nucleic acid-binding ligands.

We have developed a new helicase assay that overcomes many limitations of other assays used to measure this activity. This continuous, kinetic assay is based on the displacement of fluorescent dyes from dsDNA upon DNA unwinding. These ligands exhibit significant fluorescence enhancement when bound to duplex nucleic acids and serve as the reporter molecules of DNA unwinding. We evaluated the potential of several dyes [acridine orange, ethidium bromide, ethidium homodimer, bis-benzimide (DAPI), Hoechst 33258 and thiazole orange] to function as suitable reporter molecules and demonstrate that the latter three dyes can be used to monitor the helicase activity of Escherichia coli RecBCD enzyme. Both the binding stoichiometry of RecBCD enzyme for the ends of duplex DNA and the apparent rate of unwinding are not significantly perturbed by two of these dyes. The effects of temperature and salt concentration on the rate of unwinding were also examined. We propose that this dye displacement assay can be readily adapted for use with other DNA helicases, with RNA helicases, and with other enzymes that act on nucleic acids.     

Fosmidomycin analogues as inhibitors of monoterpenoid indole alkaloid production in Catharanthus roseus cells

Substituted 3-[2-(diethoxyphosphoryl)propyl]oxazolo[4,5-b]pyridine-2(3H)-ones were obtained by functionalization at 6-position with various substituents (aryl, vinyl, carbonyl chains) via reactions catalysed with palladium. We found that these new fosmidomycin analogues inhibited the accumulation of ajmalicine, a marker of monoterpenoid indole alkaloids production in plant cells. Some of them have greater inhibitory effect than fosmidomycin and fully inhibit alkaloid accumulation at the concentration of 100 microM.     

Structure elucidation of a senescence cross-link from human extracellular matrix. Implication of pentoses in the aging process

Isolation and structure elucidation of an acid-resistant fluorescent molecule from human extracellular matrix revealed the presence of an imidazo[4,5-b]pyridinium molecule comprising a lysine and an arginine residue cross-linked by a pentose. Structure confirmation was achieved in vitro by the nonenzymatic reaction of ribose with lysine and arginine residues. The cross-link, named pentosidine, could also be synthesized with isomers of ribose, arabinose, xylose, and lyxose as well as by incubating young human collagen with these sugars at 37 degrees C. Pentosidine was found in a variety of human tissues including plasma proteins and red blood cells. Its presence in cells grown in culture strongly suggests ribose or ribonucleotide metabolites as precursors. The unexpected discovery of pentose-mediated protein cross-linking raises new questions concerning the aging process.     

Cyanine dye–protein interactions: Looking for fluorescent probes for amyloid structures

We ascertained the ability to detect fibrillar β-lactoglobulin (BLG) of a series of mono-, tri-, penta-, and heptamethinecyanines based on benzothiazole and benzimidazole heterocycles, and of benzothiazole squaraine. Fluorescence properties of these cyanine dyes were measured in the unbound state and in the presence of monomeric and fibrillar BLG and compared with those for the commercially available benzothiazole dye Thioflavin T. The correlation between the chemical nature of the dye molecules and the ability of dyes to bind aggregated proteins was established. We found that meso-substituted cyanines with amino substituents in heterocycle in contrast to the corresponding unsubstituted dyes have a binding preference to fibrillar BLG and a noticeable fluorescence response in the presence of the aggregated protein. For the squaraines and benzimidazole penthamethinecyanines studied, fluorescence emission increased both in the presence of native and fibrillar protein. The trimethinecyanines T-49 and SH-516 exhibit specifically increased fluorescence in the presence of fibrillar BLG. These dyes demonstrated the same or higher emission intensity and selectivity to aggregated BLG as Thioflavin T, and are proposed for application in selective fluorescent detection of aggregated proteins.     

A novel series of parenteral cephalosporins exhibiting potent activities against both Pseudomonas aeruginosa and other gram-negative pathogens. Part 2: Synthesis and structure-activity relationships

A novel series of 7beta-[2-(2-amino-5-chloro-thiazol-4-yl)-2(Z)-((S)-1-carboxyethoxyimino)acetamido]cephalosporins bearing various pyridinium groups at the C-3' position were synthesized and their in vitro antibacterial activities against gram-negative pathogens including Pseudomonas aeruginosa and several gram-positive pathogens were evaluated. Among the cephalosporins prepared, we found that a cephalosporin bearing the 2-amino-1-(3-methylamino-propyl)-1H-imidazo[4,5-b]pyridinium group at the C-3' position (8a) showed potent and well-balanced antibacterial activities against P. aeruginosa and other gram-negative pathogens including the strains which produce class C beta-lactamase and extended spectrum beta-lactamase (ESBL). Compound 8a also showed efficacious in vivo activity and high stability against AmpC beta-lactamase. These findings indicate that 2-aminoimidazopyridinium having an aminoalkyl group at the 1-position as a C-3' side chain is suitable for cephalosporins bearing an aminochlorothiazolyl moiety and a carboxyethoxyimino moiety on the C-7 side chain.     

Use of fluorescent DNA-intercalating dyes in the analysis of DNA via ion-pair reversed-phase denaturing high-performance liquid chromatography

SYBR Green 1 is an asymmetrical cyanine DNA-binding dye that provides an opportunity for increasing the sensitivity of nucleic acid detection when used in conjunction with gel electrophoresis. In this paper, we summarize the general properties and specific uses of SYBR green 1 in ion-pair reversed-phase denaturing high-performance liquid chromatography (IP DHPLC). We describe several applications for the WAVE DHPLC platform that illustrate the generic potential of such intercalating dyes in mutation detection and gene expression profiling. We show that SYBR Green 1 obviates the need to use end-labeled oligodeoxynucleotides for the sensitive detection of nucleic acids during chromatography. Moreover the incorporation of SYBR Green 1 into samples and elution buffers does not impair resolution and has no significant effect on the retention times of DNA fragments compared with dye-free DHPLC.     

QSARs of some novel isosteric heterocyclics with antifungal activity

QSAR analysis of a set of previously synthesized 2,5,6-trisubstituted benzoxazole, benzimidazole and 2-substituted oxazolo(4,5-b)pyridine derivatives tested for growth inhibitory activity against Candida albicans, was performed by using the computer-assisted multiple regression procedure. The activity contributions for either heterocyclic ring systems or substituent effects of these compounds were determined from the correlation equation and the predictions for the lead optimization were described. The resulting QSAR revealed that the oxazolo(4,5-b)pyridine ring system with the substitution of a benzyl moiety at position 2 was the most favourable structure among the heterocyclic nuclei. Moreover, the fifth position in the fused ring system is found more significant than the other positions in improving the activity.     

Drug binding by branched DNA: selective interaction of the dye stains-all with an immobile junction

The thiacarbocyanine dye Stains-All (4,5:4',5'-dibenzo-3,3'-diethyl-9-methylthiacarbocyanine bromide) is one of a large number of cyanine dyes introduced as photosensitizers in the photographic industry. Stains-All is used in histology as a stain for nucleic acids, proteins, polysaccharides, and lipids. We report here that the dye colors branched DNA molecules differently from linear duplexes and use footprinting experiments with methidiumpropyl-EDTA-Fe(II) [MPE.Fe(II)] and bis(o-phenanthroline)copper(I) [(O-P)2Cu(I)] to show that Stains-All interacts preferentially at the branch point of a four-arm DNA structure. A titration experiment allows us to estimate that the interaction of the dye with the branch has a dissociation constant below 45 nM, tighter than that of ethidium or methidium by over 2 orders of magnitude. Probing the interaction with the purine-specific reagent diethyl pyrocarbonate (DEPC) implies that the dye induces an asymmetric distortion near the branch in the major grooves of double helix in the junction.     

Synthesis of some novel dimethine,bis-dimethine cyanine dyes and octacosamethine cyanine dyes endowed with promising biological potency against (HepG2), (Hela), (MCF-7), (MIA), (SN12C) and (H358) cell lines

Successfully, one step two component synthesis of dimethine cyanine dyes, bis-dimethine cyanine dyes and icosamethine cyanine dyes 2–10via reaction of pyridinium salt 1 with some different aldehydes hope to obtain these compounds with enhanced biological potency as antitumor agents against spontaneous liver (HepG2), cervical (Hela), breast (MCF-7), pancreas (MIA), kidney (SN12C) and lung (H358). The impact of substituted drugs on the tumor cells was reflected by means of structure activity relationship (SAR). Among these dyes, icosamethine cyanine dye 8 recorded an excellent activity toward all the tested cell lines. The newly destined drugs were identified and emphasized by spectroscopy and elemental analyses.     

Biomolecular computation with molecular beacons for quantitative analysis of target nucleic acids

Molecular beacons are efficient and useful tools for quantitative detection of specific target nucleic acids. Thanks to their simple protocol, molecular beacons have great potential as substrates for biomolecular computing. Here we present a molecular beacon-based biomolecular computing method for quantitative detection and analysis of target nucleic acids. Whereas the conventional quantitative assays using fluorescent dyes have been designed for single target detection or multiplexed detection, the proposed method enables us not only to detect multiple targets but also to compute their quantitative information by weighted-sum of the targets. The detection and computation are performed on a molecular level simultaneously, and the outputs are detected as fluorescence signals. Experimental results show the feasibility and effectiveness of our weighted detection and linear combination method using molecular beacons. Our method can serve as a primitive operation of molecular pattern analysis, and we demonstrate successful binary classifications of molecular patterns made of synthetic oligonucleotide DNA molecules.