Transgenic tomato lines containing Ds elements at defined genomic positions as tools for targeted transposon tagging

We have introduced a genetically marked Dissociation transposable element (Ds ^HPT ) into tomato (Lycopersicon esculentum) by Agrobacterium tumefaciens-mediated transformation. Probes for the flanking regions of the T-DNA and transposed Ds ^HPT elements were obtained with the inverse polymerase chain reaction (IPCR) technique and used in RFLP linkage analyses. The RFLP map location of 11 T-DNAs carrying Ds ^HPT was determined. The T-DNAs are distributed on 7 of the 12 tomato chromosomes. To explore the feasibility of gene tagging strategies in tomato using Ds ^HPT , we examined the genomic distribution of Ds ^HPT receptor sites relative to the location of two different, but very closely linked, T-DNA insertion sites. After crosses with plants expressing Ac transposase, the hygromycin phosphotransferase (HPT) marker on the Ds element and the excision markers -glucuronidase (GUS) and Basta resistance (BAR) facilitated the identification of plants bearing germinally transposed Ds ^HPT elements. RFLP mapping of 21 transposed Ds ^HPT elements originating from the two different T-DNA insertions revealed distinct patterns of reintegration sites.     

Ac transposition in transgenic tomato plants

Summary As an initial step towards developing a transposon mutagenesis system in tomato, the maize transposable element Ac was transformed into tomato plants via Agrobacterium tumefaciens. Southern analysis of leaf tissue indicated that in nine out of eleven transgenic plants, Ac excised from the T-DNA and reintegrated into new chromosomal locations. The comparison of Ac banding pattern in different leaves of the same primary transformant provided evidnece for transposition during later stages of transgenic plant development. There was no evidence of Ds mobilization in tomato transformants.     

α-Domain of human metallothionein IA can bind to metals in transgenic tobacco plants

We have introduced a genetically marked Dissociation transposable element (Ds ^HPT ) into tomato (Lycopersicon esculentum) by Agrobacterium tumefaciens-mediated transformation. Probes for the flanking regions of the T-DNA and transposed Ds ^HPT elements were obtained with the inverse polymerase chain reaction (IPCR) technique and used in RFLP linkage analyses. The RFLP map location of 11 T-DNAs carrying Ds ^HPT was determined. The T-DNAs are distributed on 7 of the 12 tomato chromosomes. To explore the feasibility of gene tagging strategies in tomato using Ds ^HPT , we examined the genomic distribution of Ds ^HPT receptor sites relative to the location of two different, but very closely linked, T-DNA insertion sites. After crosses with plants expressing Ac transposase, the hygromycin phosphotransferase (HPT) marker on the Ds element and the excision markers β-glucuronidase (GUS) and Basta resistance (BAR) facilitated the identification of plants bearing germinally transposed Ds ^HPT elements. RFLP mapping of 21 transposed Ds ^HPT elements originating from the two different T-DNA insertions revealed distinct patterns of reintegration sites.     

Strategies for targeted transposon tagging of ABA biosynthetic mutants in tomato

The ABA biosynthetic pathway has been studied in detail and the steps impaired in some ABA-deficient mutants are known. However, little is known of the molecular control mechanisms regulating ABA production in planta. A direct route for improving our understanding of these mechanisms is to transposon tag and clone the wild-type counterparts of the ABA mutant alleles. On the basis of the observation that maize transposons move preferentially to linked sites in both homologous and heterologous systems and in doing so disrupt gene function, a targeted transposon mutagenesis strategy is being developed towards cloning ABA biosynthetic genes from tomato. The possibility of using marker genes to identify T-DNA insertion sites in selected parts of the genome has been examined and compared with an inverse PCR/RFLP approach to mapping T-DNAs.     

Site-selected insertional mutagenesis of tomato with maizeAc andDs elements

Site-selected insertion (SSI) is a PCR-based technique which uses primers located within the transposon and a target gene for detection of transposon insertions into cloned genes. We screened tomato plants bearing single or multiple copies of maizeAc orDs transposable elements for somatic insertions at one close-range target and two long-range targets. Eight close-rangeDs insertions near the right border of the T-DNA were recovered. Sequence analysis showed a precise junction between the transposon and the target for all insertions. Two insertions in separate plants occurred at the same site, but others appeared dispersed in the region of the right T-DNA border with no target specificity. However, insertions showed a preference for one orientation of the transposon. Use of plants with multipleAc (HiAc) orDs (HiDs) elements allowed detection of somatic insertions at two single-copy genes,PG (polygalacturonase) andDFR (dihydroflavonol 4-reductase). Certain HiDs plants showed much higher rates of insertion intoPG than others. Insertions inPG andDFR were found throughout the gene regions monitored and, with the exception of one insertion inPG, the junctions between transposon and target were exact. SSI analysis of progeny from the HiDs parents revealed that in some cases the tendency to incur high levels of somatic insertions inPG was inherited. Inheritance of this character is an indication that SSI could be used to direct a search for germinalPG insertions in tomato.     

Developing a transposon tagging system to isolate rust-resistance genes from flax

Summary A line of flax, homozygous for four genes controlling resistance to flax rust, was transformed with T-DNA vectors carrying the maize transposable elements Ac and Ds to assess whether transposition frequency would be high enough to allow transposon tagging of the resistance genes. Transposition was much less frequent in flax than in Solanaceous hosts such as tobacco, tomato and potato. Transposition frequency in callus tissue, but not in plants, was increased by modifications to the transposase gene of Ac. Transactivation of the excision of a Ds element was achieved by expressing a cDNA copy of the Ac transposase gene from the Agrobacterium T-DNA 2 promoter. Progeny of three plants transformed with Ac and 15 plants transformed with Ds and the transposase gene, were examined for transposition occurring in the absence of selection. Transposition was observed in the descendants of only one plant which contained at least nine copies of Ac. Newly transposed Ac elements were observed in 25–30% of the progeny of some members of this family and one active Ac element was located 28.8 (SE=6.3) map units from the L ⁶ rust-resistance gene. This family will be potentially useful in our resistance gene tagging program.     

Use of the maize transposonsActivator andDissociation to show that phosphinothricin and spectinomycin resistance genes act non-cell-autonomously in tobacco and tomato seedlings

Cell-autonomous genes have been used to monitor the excision of both endogenous transposons in maize andAntirrhinum, and transposons introduced into transgenic plants. In tobacco andArabidopsis, the streptomycin phosphotransferase (SPT) gene reveals somatic excision of the maize transposonActivator (Ac) as green sectors on a white background in cotyledons of seedlings germinated in the presence of streptomycin. Cotyledons of tomato seedlings germinated on streptomycin-containing medium do not bleach, suggesting that a different assay for transposon excision in tomato is desirable. We have tested the use of the spectinomycin resistance (SPEC) gene (aadA) and a Basta resistance (BAR) gene (phosphinothricin acetyltransferase, or PAT) for monitoring somatic excision ofAc in tobacco and tomato. Both genetic and molecular studies demonstrate that genotypically variegated individuals that carry clones of cells from whichAc orDs have excised from either SPEC or BAR genes, can be phenotypically completely resistant to the corresponding antibiotic. This demonstrates that these genes act non-cell-autonomously, in contrast to the SPT gene in tobacco. Possible reasons for this difference are discussed.     

Characterization of theAc/Ds behaviour in transgenic tomato plants using plasmid rescue

We describe the use of plasmid rescue to facilitate studies on the behaviour ofDs andAc elements in transgenic tomato plants. The rescue ofDs elements relies on the presence of a plasmid origin of replication and a marker gene selective inEscherichia coli within the element. The position within the genome of modifiedDs elements, rescued both before and after transposition, is assigned to the RFLP map of tomato. Alternatively to the rescue ofDs elements equipped with plasmid sequences,Ac elements are rescued by virtue of plasmid sequences flanking the element. In this way, the consequences of the presence of an (active)Ac element on the DNA structure at the original site can be studied in detail. Analysis of a library ofAc elements, rescued from the genome of a primary transformant, shows thatAc elements are, infrequently, involved in the formation of deletions. In one case the deletion refers to a 174 bp genomic DNA sequence immediately flankingAc. In another case, a 1878 bp internalAc sequence is deleted.     

Infrequent transposition of Ac in lettuce,Lactuca sativa

The maize transposable element Activator (Ac) is being used to develop a transposon mutagenesis system in lettuce, Lactuca sativa. Two constructs containing the complete Ac from the waxy-m7 locus of maize were introduced into lettuce and monitored for activity using Southern analysis and PCR amplification of the excision site. No transposition of Ac was detected in over 32 transgenic R₁ plants, although these constructs were known to provide frequent transposition in other species. Also, no transposition was observed in later generations. In subsequent experiments, transposition was detected in lettuce calli using constructs that allowed selection for excision events. In these constructs, the neomycin phosphotransferase II gene was interrupted by either Ac or Ds. Excision was detected as the ability of callus to grow on kanamycin. Synthesis of the transposase from the cDNA of Ac expressed from the T-DNA 2 promoter resulted in more frequent excision of Ds than was observed with the wild-type Ac. No excision was observed with Ds in the absence of the transposase. The excision events were confirmed by amplification of the excision site by PCR followed by DNA sequencing. Excision and reintegration were also confirmed by Southern analysis. Ac/Ds is therefore capable of transposition in at least calli of lettuce.     

Frequency and distance of transposition of a modifiedDissociation element in transgenic tobacco

Effective transposon tagging with theAc/Ds system in heterologous plant species relies on the accomplishment of a potentially high transposon-induced mutation frequency. The primary parameters that determine the mutation frequency include the transposition frequency and the transposition distance. In addition, the development of a generally applicable transposon tagging strategy requires predictable transposition behaviour. We systematically analysedDs transposition frequencies andDs transposition distances in tobacco. An artificialDs element was engineered with reporter genes that allowed transposon excision and integration to be monitored visually. To analyse the variability ofDs transposition between different tobacco lines, eight single copy T-DNA transformants were selected. Fortrans-activation of theDs elements, differentAc lines were used carrying an unmodifiedAc ⁺ element, an immobilizedsAc element and a stableAc element under the control of a heterologous chalcone synthas (chsA) promoter. With allAc elements, eachDs line showed characteristic and heritable variegation patterns at the seedling level. SimilarDs line-specificity was observed for the frequency by whichDs transpositions were germinally transmitted, as well as for the distances of theDs transpositions. ThesAc element induced transposition ofDs late in plant development, resulting in low germinal transposition frequencies (0.37%) and high incidences of independent transposition (83%). The majority of theseDs elements (58%) transposed to genetically closed linked sites (10 cM).     

Development of Ac and Ds transposon tagging lines for gene isolation in diploid potato

For the development of an efficient transposon tagging strategy it is important to generate populations of plants containing unique independent transposon insertions that will mutate genes of interest. To develop such a transposon system in diploid potato the behavior of the autonomous maize transposable element Ac and the mobile Ds element was studied. A GBSS (Waxy) excision assay developed for Ac was used to monitor excision in somatic starch-forming tissue like tubers and pollen. Excision of Ac results in production of amylose starch that stains blue with iodine. The frequency and patterns of blue staining starch granules on tuber slices enabled the identification of transformants with different Ac activity. After excision the GBSS complementation was usually not complete, probably due to the segment of DNA flanking Ac that is left behind in the GBSS gene. Molecular and phenotypic analyses of 40 primary transformants classified into 4 phenotypic classes revealed reproducible patterns. A very high percentage (32.5%) of the primary transformants clearly showed early excision in the first transformed cell as displayed both by the analysis of the GBSS excision marker gene as well as DNA blot analyses. Genotypes useful for tagging strategies were used for crosses and the frequency of independent germinal transpositions was assessed. In crosses to Ds genotypes, excision of Ds was revealed that correlated to the activity of the Ac genotype. A line displaying Ac amplification to multiple copies conferred a high frequency of independent Ds transpositions. The genotypes described here are useful in somatic insertion mutagenesis aimed at the isolation of tagged mutations in diploid potato.     

Use of the transposable element Ac/Ds in conjunction with Spm/dSpm for gene tagging allows extensive genome coverage with a limited number of starter lines: functional analysis of a four-element system in Arabidopsis thaliana

We have developed a novel four-element based gene tagging system in Arabidopsis to minimize the number of starter lines required to generate genome-wide insertions for saturation mutagenesis. In this system, the non-autonomous cassette, Ds(dSpm), comprises of both Ds and dSpm elements cloned one within the other along with appropriate selection markers to allow efficient monitoring of excision and re-integration of the transposons. Trans-activation of the outer borders (Ds) and selection against the negative selection marker (iaaH) linked to the cassette ensures unlinked spread of the Ds(dSpm) cassette from the initial site of integration of the T-DNA. This creates several launch pads within the genome from where the internal element (dSpm) can be subsequently mobilized to generate secondary insertions. In this study, starting from a single T-DNA integration we could spread the Ds(dSpm) cassette to 11 different locations over all the five chromosomes of Arabidopsis. The frequency of unlinked Ds transpositions in the F2 generation varied between 0.05 and 3.35%. Three of these lines were then deployed to trans-activate the internal dSpm element which led to the selection of 29 dSpm insertions. The study conclusively shows the feasibility of deploying Ds and the dSpm elements in a single construct for insertional mutagenesis.     

Multi-functional T-DNA/Ds tomato lines designed for gene cloning and molecular and physical dissection of the tomato genome

In order to make the tomato genome more accessible for molecular analysis and gene cloning, we have produced 405 individual tomato (Lycopersicon esculentum) lines containing a characterized copy of pJasm13, a multifunctional T-DNA/modifiedDs transposon element construct. Both the T-DNA and the Ds element in pJasm13 harbor a set of selectable marker genes to monitor excision and reintegration of Ds and additionally, target sequences for rare cutting restriction enzymes (I-PpoI, SfiI, NotI) and for site-specific recombinases (Cre, FLP, R). Blast analysis of flanking genomic sequences of 174 T-DNA inserts revealed homology to transcribed genes in 69 (40%), of which about half are known or putatively identified as genes and ESTs. The map position of 140 individual inserts was determined on the molecular genetic map of tomato. These inserts are distributed over the 12 chromosomes of tomato, allowing targeted and non-targeted transposon tagging, marking of closely linked genes of interest and induction of chromosomal rearrangements including translocations or creation of saturation-deletions or inversions within defined regions linked to the T-DNA insertion site. The different features of pJasm13 were successfully tested in tomato and Arabidopsis thaliana, thus providing a new tool for molecular/genetic dissection studies, including molecular and physical mapping, mutation analysis and cloning strategies in tomato and potentially, in other plants as well.Equal contributors to this workEqual contributors to this workEqual contributors to this workEqual contributors to this workEqual contributors to this workEqual contributors to this workEqual contributors to this workEqual contributors to this workEqual contributors to this workEqual contributors to this workEqual contributors to this workEqual contributors to this work     

Mapping Ds insertions in barley using a sequence-based approach

A transposon tagging system, based upon maize Ac/Ds elements, was developed in barley (Hordeum vulgare subsp. vulgare). The long-term objective of this project is to identify a set of lines with Ds insertions dispersed throughout the genome as a comprehensive tool for gene discovery and reverse genetics. AcTPase and Ds-bar elements were introduced into immature embryos of Golden Promise by biolistic transformation. Subsequent transposition and segregation of Ds away from AcTPase and the original site of integration resulted in new lines, each containing a stabilized Ds element in a new location. The sequence of the genomic DNA flanking the Ds elements was obtained by inverse PCR and TAIL-PCR. Using a sequence-based mapping strategy, we determined the genome locations of the Ds insertions in 19 independent lines using primarily restriction digest-based assays of PCR-amplified single nucleotide polymorphisms and PCR-based assays of insertions or deletions.The proncipal strategy was to identify and map sequence polymorphisms in the regions corresponding to the flanking DNA using the Oregon Wolfe Barley mapping population. The mapping results obtained by the sequence-based approach were confirmed by RFLP analyses in four of the lines. In addition, cloned DNA sequences corresponding to the flanking DNA were used to assign map locations to Morex-derived genomic BAC library inserts, thus integrating genetic and physical maps of barley. BLAST search results indicate that the majority of the transposed Ds elements are found within predicted or known coding sequences. Transposon tagging in barley using Ac/Ds thus promises to provide a useful tool for studies on the functional genomics of the Triticeae.Electronic Supplementary Material Supplementary material is available in the online version of this article at Communicated by M.-A. GrandbastienThe first three authors contributed equally to this work     

Implications for the cis-requirements for Ds transposition based on the sequence of the wxB4 Ds element

Summary The nucleotide sequence of the 1494 by wxB4 Ds element is presented. A comparison with previously characterized Ds elements reveals several novel features. This element has less Ac terminal sequence than other Ac-like Ds elements. The left terminus contains 398 by of Ac sequence interrupted by a transposon-like DNA insertion, leaving only 317 by of contiguous Ac sequence. The right terminus has 259 by of Ac terminal sequence. The interior of the element contains sequences not found in other cloned members of the Ac/Ds family. We suggest that the role of this non-Ac DNA is to separate the Ac termini by a minimum distance and may be a cis requirement for Ds transposition in maize.Abbreviations Ac activator - Adh1 alcohol dehydrogenase 1 - Ds dissociation - RFLP restriction fragment length polymorphism - Spm suppressor mutator - Wx waxy     

Factors affecting the excision frequency of the maize transposable element Ds in Arabidopsis thaliana

A two-element transposon system based on the maize elements Ac and Ds is currently being used for insertional mutagenesis in Arabidopsis. With the aim of making this system as efficient as possible we have continued to analyse several parameters which affect Ds activity in Arabidopsis. The influence of genomic position on Ds excision has been analysed in five lines carrying Ds integrated in different genomic locations. Differences in both somatic and germinal excision were observed between the different lines. The relationship between somatic and germinal excision, the timing of excision events and environmental influences on transposition frequency have been investigated. The effect of varying dosage of the different elements was also analysed. A strong positive dosage effect was observed for the transposase source, but not for the Ds element. Analysis of germinal excision events showed that the majority of them occurred very late in the development of the plant, resulting in the majority of Ds transpositions being independent events.     

Ac Transposition from a T-DNA Can Generate Linked and Unlinked Clusters of Insertions in the Tomato Genome

We have investigated the distribution of transposed Acs in the tomato genome. Our approach has been to clone the regions flanking the T-DNAs and transposed Acs from two transgenic lines of tomato and place these sequences on the tomato restriction fragment length polymorphism (RFLP) map. The distribution of transposed Acs around the T-DNA and at locations unlinked to the T-DNA indicates that Ac transposes to linked and unlinked sites in tomato as it does in maize. The structure and terminal sequence of these cloned elements shows that Ac remains intact after transposition. We discuss these results and their bearing on gene tagging strategies using Ac and Ds.     

High-frequency Ds remobilization over multiple generations in barley facilitates gene tagging in large genome cereals

Transposable elements have certain advantages over other approaches for identifying and determining gene function in large genome cereals. Different strategies have been used to exploit the maize Activator/dissociation (Ac/Ds) transposon system for functional genomics in heterologous species. Either large numbers of independent Ds insertion lines or transposants (TNPs) are generated and screened phenotypically, or smaller numbers of TNPs are produced, Ds locations mapped and remobilized for localized gene targeting. It is imperative to characterize key features of the system in order to utilize the latter strategy, which is more feasible in large genome cereals like barley and wheat. In barley, we generated greater than 100 single-copy Ds TNPs and determined remobilization frequencies of primary, secondary, and tertiary TNPs with intact terminal inverted repeats (TIRs); frequencies ranged from 11.8 to 17.1%. In 16% of TNPs that had damaged TIRs no transposition was detected among progeny of crosses using those TNPs as parental lines. In half of the greater than 100 TNP lines, the nature of flanking sequences and status of the 11 bp TIRs and 8-bp direct repeats were determined. BLAST searches using a gene prediction program revealed that 86% of TNP flanking sequences matched either known or putative genes, indicating preferential Ds insertion into genic regions, critical in large genome species. Observed remobilization frequencies of primary, secondary, tertiary, and quaternary TNPs, coupled with the tendency for localized Ds transposition, validates a saturation mutagenesis approach using Ds to tag and characterize genes linked to Ds in large genome cereals like barley and wheat.     

Transactivation of Ds elements in plants of lettuce (Lactuca sativa)

The maize transposable element, Activator (Ac), is being used to develop a transposon mutagenesis system in lettuce, Lactuca sativa. In this paper, we describe somatic and germinal transactivation of Ds by chimeric transposase genes in whole plants. Constructs containing either the Ds element or the Ac transposase open reading frame (ORF) were introduced into lettue. The Ds element was located between either the 35S or the Nos promoter and a chimeric spectinomycin resistance gene (which included a transit peptide), preventing expression of spectinomycin resistance. The genomic coding region of the Ac transposase was expressed from the 35S promoter. Crosses were made between 104 independent R₁ plants containing Ds and three independent R₁ plants expressing transposase. The excision of Ds in F₁ progenies was monitored using a phenotypic assay on spectinomycin-containing medium. Green sectors in one-third of the F₁ families indicated transactivation of Ds by the transposase at different developmental stages and at different frequencies in lettuce plants. Excision was confirmed using PCR and by Southern analysis. The lack of green sectors in the majority of F₁ families suggests that the majority of T-DNA insertion sites are not conducive to excision. In subsequent experiments, the F₁ plants containing both Ds and the transposase were grown to maturity and the F₂ seeds screened on medium containing spectinomycin. Somatic excision was again observed in several F₂ progeny; however, evidence for germinal excision was observed in only one F₂ family.     

A collection of sequenced and mapped Ds transposon insertion sites in Arabidopsis thaliana

Insertional mutagenesis is a powerful tool for generating knockout mutations that facilitate associating biological functions with as yet uncharacterized open reading frames (ORFs) identified by genomic sequencing or represented in EST databases. We have generated a collection of Dissociation(Ds) transposon lines with insertions on all 5 Arabidopsischromosomes. Here we report the insertion sites in 260 independent single-transposon lines, derived from four different Ds donor sites. We amplified and determined the genomic sequence flanking each transposon, then mapped its insertion site by identity of the flanking sequences to the corresponding sequence in the Arabidopsisgenome database. This constitutes the largest collection of sequence-mapped Ds insertion sites unbiased by selection against the donor site. Insertion site clusters have been identified around three of the four donor sites on chromosomes 1 and 5, as well as near the nucleolus organizers on chromosomes 2 and 4. The distribution of insertions between ORFs and intergenic sequences is roughly proportional to the ratio of genic to intergenic sequence. Within ORFs, insertions cluster near the translational start codon, although we have not detected insertion site selectivity at the nucleotide sequence level. A searchable database of insertion site sequences for the 260 transposon insertion sites is available at http://sgio2.biotec.psu.edu/sr. This and other collections of Arabidopsislines with sequence-identified transposon insertion sites are a valuable genetic resource for functional genomics studies because the transposon location is precisely known, the transposon can be remobilized to generate revertants, and the Ds insertion can be used to initiate further local mutagenesis.