The Influence of Natural Surface Microtopographies on Fouling

Multiple antifouling strategies of marine organisms may consist of combinations of physical, chemical and mechanical mechanisms. In this study, the role of surface microtopography (?<?500?μm) of different marine organisms, such as Cancer pagurus, Mytilus edulis, Ophiura texturata and the eggcase of Scyliorhinus canicula, has been investigated as a possible component of their defence systems. High resolution resin replicates of these natural surface structures were exposed to natural fouling in field experiments. Abundances of recruits were determined and compared to those on untextured, but otherwise identical, control surfaces to quantify the influence of the different microtopographies on fouling rates. Antifouling effects of microtopographies varied with type of microtopography and coloniser species. The surface microtopography of C. pagurus significantly rejected macrofoulers. The surface structures of the eggcase and O. texturata had repellent effects on microfoulers. Barnacle settlement was temporarily reduced on surface microtopographies of M. edulis and the eggcase. These results emphasise the promising non-toxic antifouling properties of microtextured surfaces.     

Chemical defence in mussels: antifouling effect of crude extracts of the periostracum of the blue mussel Mytilus edulis

Shells of the blue mussel Mytilus edulis remain free of fouling organisms as long as they possess an intact periostracum, and a multiple antifouling defence that comprises a ripple-like microtopography and the production of chemical antifouling compounds has been suggested previously. This study investigates the chemical defence strategy of blue mussels for the first time. Six crude extracts of the periostracum of intact shells were made using solvents of increasing polarity. These extracts were tested against common fouling organisms in laboratory based bioassays. Non-polar and moderately polar fractions showed the highest activities: the diethyl ether fraction strongly inhibited attachment of Balanus amphitrite cyprids and the marine bacteria Cobetia marina and Marinobacter hydrocarbonoclasticus. Attachment of the benthic diatom Amphora coffeaeformis was significantly reduced by the dichloromethane extract, whereas both ethyl acetate and diethyl ether fractions slowed diatom growth. These results provide the first evidence of surface bound compounds that may moderate surface colonisation.     

Surface microtopographies of tropical sea stars: lack of an efficient physical defence mechanism against fouling

The role of surface topography as a defence against fouling in tropical sea stars was investigated. The sea stars Linckia laevigata, Fromia indica, Cryptasterina pentagona and Archaster typicus are not fouled and have paxillae (modified ossicles with a median vertical pillar) on their aboral surfaces, which varied in diameter, height and distance depending on species and position on the aboral surface, providing unique and complex surface microtopographies for each species. The surfaces of the sea stars L. laevigata, F. indica and A. typicus were moderately wettable, with their mean seawater contact angles, calculated from captive bubble measurements, being 60.1 degrees, 70.3 degrees and 57.3 degrees, respectively. The seawater contact angle of C. pentagona could not be measured. To evaluate the effectiveness of the surface microtopographies in deterring the settlement of fouling organisms, field experiments with resin replicas of the four sea star species were conducted at three sites around Townsville, Australia, for 8 weeks during the dry and wet seasons. The fouling community and total fouling cover did not differ significantly between replicas of L. laevigata, F. indica, C. pentagona, A. typicus and control surfaces at any site during the dry season. Significant differences between fouling communities on the replicas of the sea stars and control surfaces were detected at two sites during the wet season. However, these differences were transitory, and the total fouling cover did not differ significantly between replicas of sea stars and control surfaces at two of the three sites. In contrast to recent literature on the effects of biofouling control by natural surfaces in the marine environment, the surface microtopographies of tropical sea stars alone were not effective in deterring the settlement and growth of fouling organisms.     

Relevance of mytilid shell microtopographies for fouling defence – a global comparison

Prevention of epibiosis is of vital importance for most aquatic organisms, which can have consequences for their ability to invade new areas. Surface microtopography of the shell periostracum has been shown to have antifouling properties for mytilid mussels, and the topography shows regional differences. This article examines whether an optimal shell design exists and evaluates the degree to which shell microstructure is matched with the properties of the local fouling community. Biomimics of four mytilid species from different regional provenances were exposed at eight different sites in both northern and southern hemispheres. Tendencies of the microtopography to both inhibit and facilitate fouling were detected after 3 and 6 weeks of immersion. However, on a global scale, all microtopographies failed to prevent fouling in a consistent manner when exposed to various fouling communities and when decoupled from other shell properties. It is therefore suggested that the recently discovered chemical anti-microfouling properties of the periostracum complement the anti-macrofouling defence offered by shell microtopography.     

Surface microtopographies of tropical sea stars: lack of an efficient physical defence mechanism against fouling

Abstract

The role of surface topography as a defence against fouling in tropical sea stars was investigated. The sea stars Linckia laevigata, Fromia indica, Cryptasterina pentagona and Archaster typicus are not fouled and have paxillae (modified ossicles with a median vertical pillar) on their aboral surfaces, which varied in diameter, height and distance depending on species and position on the aboral surface, providing unique and complex surface microtopographies for each species. The surfaces of the sea stars L. laevigata, F. indica and A. typicus were moderately wettable, with their mean seawater contact angles, calculated from captive bubble measurements, being 60.1°, 70.3° and 57.3°, respectively. The seawater contact angle of C. pentagona could not be measured. To evaluate the effectiveness of the surface microtopographies in deterring the settlement of fouling organisms, field experiments with resin replicas of the four sea star species were conducted at three sites around Townsville, Australia, for 8 weeks during the dry and wet seasons. The fouling community and total fouling cover did not differ significantly between replicas of L. laevigata, F. indica, C. pentagona, A. typicus and control surfaces at any site during the dry season. Significant differences between fouling communities on the replicas of the sea stars and control surfaces were detected at two sites during the wet season. However, these differences were transitory, and the total fouling cover did not differ significantly between replicas of sea stars and control surfaces at two of the three sites. In contrast to recent literature on the effects of biofouling control by natural surfaces in the marine environment, the surface microtopographies of tropical sea stars alone were not effective in deterring the settlement and growth of fouling organisms.     

Marine microbial natural products in antifouling coatings

Ecological problems associated with current antifouling technologies have increased interest in the natural strategies that marine organisms use to keep their surfaces clean and free from fouling. Bacteria isolated from living surfaces in the marine environment have been shown to produce chemicals that are potential antifoulants. Active compounds from the cells and culture supernatant of two bacterial strains, FS‐55 and NudMB50–11, isolated from surface of the seaweed, Fucus serratus, and the nudibranch, Archidoris pseudoargus, respectively, were extracted using solid phase extraction. The extracts were combined with acrylic base paint resin and assayed for antifouling activity by measuring their ability to inhibit the growth of fouling bacteria. These formulations were found to be active against fouling bacteria isolated from marine surfaces. The formulation of antifouling paints that incorporate marine microbial natural products is reported here for the first time. This is a significant advance towards the production of an environmentally friendly antifouling paint that utilises a sustainable supply of natural biodegradable compounds.     

The characterization, replication and testing of dermal denticles of Scyliorhinus canicula for physical mechanisms of biofouling prevention

There is a current need to develop novel non-toxic antifouling materials. The mechanisms utilized by marine organisms to prevent fouling of external surfaces are of interest in this regard. Biomimicry of these mechanisms and the ability to transfer the antifouling characteristics of these surfaces to artificial surfaces are a highly attractive prospect to those developing antifouling technologies. In order to achieve this, the mechanisms responsible for any antifouling ability must be elucidated from the study of the natural organism and the critical surface parameters responsible for fouling reduction. Dermal denticles of members of the shark family have been speculated to possess some natural, as yet unidentified antifouling mechanism related to the physical presence of denticles. In this study, the dermal denticles of one particular member of the slow-swimming sharks, Scyliorhinus canicula were characterized and it was found that a significant natural variation in denticle dimensions exists in this species. The degree of denticle surface contamination was quantified on denticles at various locations and it was determined that the degree of contamination of the dorsal surface of denticles varies with the position on the shark body. In addition, we successfully produced synthetic sharkskin samples using the real skin as a template. Testing of the produced synthetic skin in field conditions resulted in significant differences in material attachment on surfaces exhibiting denticles of different dimensions.     

化学生态学在海洋污损生物防除中的应用

在海洋环境中,许多海洋生物都能产生对环境无危害的、具有防污活性的次生代谢产物以保护自身的洁净,利于自身的生存.用化学生态学的方法从海洋生物中提取天然防除物质成为近年来解决海洋污损生物问题的新思路,其目标是寻找高效无毒的防污材料取代原有的对海洋环境有严重危害的化学合成防污材料.虽然目前对提取生物的次生代谢产物的防污机理还所知甚少,但不少从海洋生物中获得的天然产物已显示出良好的防污活性.要解决污损生物防污问题,还需对天然产物的作用机制、生态学效应、天然产物与涂料的结合、控制和释放及野外实验进行更加深入的研究与探讨.     

Fouling deterrence on the bivalve shell Mytilus galloprovincialis: a physical phenomenon?

The physical nature of fouling deterrence by the mussel Mytilus galloprovincialis was investigated using high-resolution biomimics of the bivalve surface. The homogeneous microtextured surface of M. galloprovincialis (1.94 +/- 0.03 microm), the smooth surface of the bivalve Amusium balloti (0 microm), and moulds of these surfaces (biomimics) were compared with controls of smooth (0 microm) and sanded moulds, (55.4 +/- 2.7 microm) and PVC strips (0 microm) in a 12-week field trial. The shell and mould of M. galloprovincialis were fouled by significantly fewer species and had significantly less total fouling cover than the shell and mould of A. balloti over a 12-week period. However, the major effects were between surfaces with and without microtopography. Surface microtopography, be it structured as in the case of M. galloprovincialis shell and mould, or random as in the case of the sanded mould, had a lower cover of fouling organisms than treatments without microtopography after 6 weeks. There was also no difference between the effect of the M. galloprovincialis mould and the sanded mould. The strong fouling deterrent effects of both these surfaces diminished rapidly after 6 to 8 weeks while that of M. galloprovincialis shell remained intact for the duration of the experiment suggesting factors in addition to surface microtopography contribute to fouling deterrence.     

A comparative study of the anti-settlement properties of mytilid shells

Marine organisms have evolved defence mechanisms to prevent epibiosis. This study investigated the anti-settlement properties of natural periostracal microtopographies of two mytilid species, Mytilus edulis (from North, Baltic and White Seas) and Perna perna (from the SW Atlantic). Resin replicas of shells were exposed to cyprids of the barnacle Semibalanus balanoides. Replicas with intact isotropic microtopographies and smooth controls were much less fouled than roughened anisotropic surfaces. This indicates that in both M. edulis and P. perna the periostracum possesses a generic anti-settlement property, at least against S. balanoides cyprids, which is not regionally adapted. Such a potential globally effective anti-settlement mechanism possibly contributes to the invasive success of Mytilidae.     

Engineered antifouling microtopographies: kinetic analysis of the attachment of zoospores of the green alga Ulva to silicone elastomers

Microtopography has been demonstrated as an effective deterrent to biofouling. The majority of published studies are fixed-time assays that raise questions regarding the kinetics of the attachment process. This study investigated the time-dependent attachment density of zoospores of Ulva, in a laboratory assay, on a micropatterned and smooth silicone elastomer. The attachment density of zoospores was reduced on average 70-80% by the microtopography relative to smooth surfaces over a 4 h exposure. Mapping the zoospore locations on the topography revealed that they settled preferentially in specific, recessed areas of the pattern. The kinetic data fit, with high correlation (r(2) > 0.9), models commonly used to describe the adhesion of bacteria to surfaces. The grouping of spores on the microtopography indicated that the pattern inhibited the ability of attached spores to recruit neighbors. This study demonstrates that the antifouling mechanism of topographies may involve disruption of the cooperative effects exhibited by fouling organisms such as Ulva.     

Molecular approaches to nontoxic antifouling

Summary

A consequence of environmental and human health concerns arising from the use of toxic metals in marine antifouling coatings has been to recognise the need for a nontoxic alternative to fouling control. Recent research has focused on two approaches to this problem: the development of (a) foul-release coatings that work on the principle of either low surface free energy or coating ablation, and (b) coatings that incorporate a compound(s) that is nontoxic, or at least environmentally benign, that will deter fouling. Here we discuss the nature of the fouling problem and a new technology that is emerging to address it. The use of natural marine products and of analogues to these compounds holds considerable promise and is an area of intense research. It is recognized, however, that a melding of the technologies of foul-release and foul-deterrence may be required to develop broad spectrum, nontoxic antifouling coatings. This approach may more closely reflect antifouling strategies adopted by marine organisms that maintain a foul-free surface.     

Fouling Deterrence on the Bivalve Shell Mytilus galloprovincialis: A Physical Phenomenon?

The physical nature of fouling deterrence by the mussel Mytilus galloprovincialis was investigated using high-resolution biomimics of the bivalve surface. The homogeneous microtextured surface of M. galloprovincialis (1.94 ± 0.03 μm), the smooth surface of the bivalve Amusium balloti (0 μm), and moulds of these surfaces (biomimics) were compared with controls of smooth (0 μm) and sanded moulds, (55.4 ± 2.7 μm) and PVC strips (0 μm) in a 12-week field trial. The shell and mould of M. galloprovincialis were fouled by significantly fewer species and had significantly less total fouling cover than the shell and mould of A. balloti over a 12-week period. However, the major effects were between surfaces with and without microtopography. Surface microtopography, be it structured as in the case of M. galloprovincialis shell and mould, or random as in the case of the sanded mould, had a lower cover of fouling organisms than treatments without microtopography after 6 weeks. There was also no difference between the effect of the M. galloprovincialis mould and the sanded mould. The strong fouling deterrent effects of both these surfaces diminished rapidly after 6 to 8 weeks while that of M. galloprovincialis shell remained intact for the duration of the experiment suggesting factors in addition to surface microtopography contribute to fouling deterrence.     

天然产物防除海洋污损生物的研究进展

天然防污剂是当前海洋污损生物防除的研究热点,本文综述了天然防污剂的种类和来源,以及天然防污剂的防除机理,并着重叙述了天然防污涂料配制时应关注的问题。     

Screening of Marine Algal Extracts for Anti-settlement Activities against Microalgae and Macroalgae

The ban on the use of TBT-based antifouling paints for boats under 25 m in length has lead to a search for new non-toxic antifoulants. One of the most promising alternative technologies to heavy metal based antifouling paint is the development of antifouling coatings whose active ingredients are naturally occurring compounds from marine organisms. This is based on the principle that marine organisms also face the problem of the presence of epibionts on their own surfaces. In this study, the antifouling activity of a series of aqueous, ethanolic and dichloromethane extracts from thirty algae from the North East Atlantic coast was investigated. The extracts were tested in laboratory assays against species representative of two major groups of fouling organisms, viz . macroalgae and microalgae. The activity of several extracts was comparable to that of heavy metals and biocides (such as TBTO and CuSO 4 ) currently used in antifouling paints and their lack of toxicity with respect to the larvae of oysters and sea urchins suggests a potential for novel active ingredients.     

The biology of biofouling diatoms and their role in the development of microbial slimes

Diatoms are a major component of microbial slimes that develop on man-made surfaces placed in the marine environment. Toxic antifouling paints, as well as environmentally friendly, fouling-release coatings, tend to be effective against most fouling organisms, yet fail badly to diatom slimes. Biofouling diatoms have been found to tenaciously adhere to and colonise even the most resistant of artificial surfaces. This review covers the basic biology of fouling marine diatoms, their mechanisms of adhesion and the nature of their adhesives, as well as documenting the various approaches that have been utilised to understand the formation and maintenance of diatom biofouling layers.     

The biology of biofouling diatoms and their role in the development of microbial slimes

Diatoms are a major component of microbial slimes that develop on man-made surfaces placed in the marine environment. Toxic antifouling paints, as well as environmentally friendly, fouling-release coatings, tend to be effective against most fouling organisms, yet fail badly to diatom slimes. Biofouling diatoms have been found to tenaciously adhere to and colonise even the most resistant of artificial surfaces. This review covers the basic biology of fouling marine diatoms, their mechanisms of adhesion and the nature of their adhesives, as well as documenting the various approaches that have been utilised to understand the formation and maintenance of diatom biofouling layers.     

Antifouling properties of 10beta-formamidokalihinol-A and kalihinol A isolated from the marine sponge Acanthella cavernosa

Many soft-bodied sessile marine invertebrates such as sponges and soft corals defend themselves against fouling directly through the production of antifouling compounds, or indirectly through regulating the epibiotic microbes that affect larval settlement. In this study, 10beta-formamidokalihinol-A and kalihinol A were isolated and purified from the marine sponge Acanthella cavernosa (Dendy). The results indicated that both compounds inhibited the growth of bacteria isolated from the natural environment whereas kalihinol A suppressed larval settlement of a major fouling polychaete, Hydroides elegans with an EC50 of 0.5 microg ml(-1). Kalihinol A was incorporated in Phytagel that was exposed to the bacterial consortia in natural seawater for biofilm formation. Biofilms that developed on the Phytagel surfaces were analysed for bacterial abundance and bacterial species composition using a DNA fingerprinting technique, terminal restriction fragment length polymorphism (T-RFLP). The results showed that kalihinol A only slightly reduced bacterial abundance (t-test, p = 0.0497), but modified the bacterial species composition of the biofilms. Inhibition of H. elegans larval settlement was observed when biofilms developed under the influence of kalihinol A were exposed to larvae, suggesting that compounds like kalihinol A from the sponge A. cavernosa may change bacterial community composition on the sponge surface, which in turn, modulates larval settlement of fouling organisms.     

Principles of Biofouling Protection in Marine Sponges: A Model for the Design of Novel Biomimetic and Bio-inspired Coatings in the Marine Environment?

The process of biofouling of marine structures and substrates, such as platforms or ship hulls, proceeds in multiple steps. Soon after the formation of an initial conditioning film, formed via the adsorption of organic particles to natural or man-made substrates, a population of different bacterial taxa associates under the formation of a biofilm. These microorganisms communicate through a complex quorum sensing network. Macro-foulers, e.g., barnacles, then settle and form a fouling layer on the marine surfaces, a process that globally has severe impacts both on the economy and on the environment. Since the ban of tributyltin, an efficient replacement of this antifouling compound by next-generation antifouling coatings that are environmentally more acceptable and also showing longer half-lives has not yet been developed. The sponges, as sessile filter-feeder animals, have evolved antifouling strategies to protect themselves against micro- and subsequent macro-biofouling processes. Experimental data are summarized and suggest that coating of the sponge surface with bio-silica contributes to the inhibition of the formation of a conditioning film. A direct adsorption of the surfaces by microorganisms can be impaired through poisoning the organisms with direct-acting secondary metabolites or toxic peptides. In addition, first, compounds from sponges have been identified that interfere with the anti-quorum sensing network. Sponge secondary metabolites acting selectively on diatom colonization have not yet been identified. Finally, it is outlined that direct-acting secondary metabolites inhibiting the growth of macro-fouling animals and those that poison the multidrug resistance pump are available. It is concluded that rational screening programs for inhibitors of the complex and dynamic problem of biofilm production, based on multidisciplinary studies and using sponges as a model, are required in the future.