Characterization of diacetylenic liposomes as carriers for oral vaccines

In order to evaluate liposomes as vehicle for oral vaccines the characterization and stability of polymerized and non-polymerized liposomes were examined. Mixtures of 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3 phosphocholine) (DC8,9PC) with saturated 1,2-dimiristoyl-sn-glycero-3-phosphocholine in molar ratio 1:1 were used. Saturated and non-saturated lipids were combined to give a chemically modified membrane by UV polymerization derived from DC8,9PC. Characterization was carried out by electronic microscopy, differential scanning calorimetry (DSC) and by hydrophobicity factor (HF). The stability towards the digestive tract (including saliva): acidic solutions, bile and pancreatin are compared to buffer pH 7.4, measuring the release of Glucose-6-phosphate or bovine plasma albumin entrapment. The polymerized liposomes showed further augmentation of the HF and the size. DSC showed phase separation and lower Tt if compared to data obtained for DC8,9PC. The HF, as main factor is discussed in relation to in vitro stability, suggesting that polymerized and non-polymerized liposomes would serve effectively as an oral delivery vehicle.     

Structure of polymerizable lipid bilayers: water profile of a diacetylenic lipid bilayer using elastic neutron scattering

Elastic neutron scattering experiments have been used to study the hydration of multibilayers of 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DC8,9PC). Previously published FTIR spectroscopic data had suggested, based on shifts in the carbonyl (C = O) stretch frequencies, that the phosphocholine headgroup in these polymerizable lipid bilayers was much less hydrated than that of saturated phosphatidylcholines. Our results demonstrate that the DC8,9PC headgroup is at least as well hydrated as that of dipalmitoylphosphatidylcholine (DPPC), a saturated lipid, under the same conditions.     

Insertion of bacteriorhodopsin into polymerized diacetylenic phosphatidylcholine bilayers

We have developed a method to incorporate the membrane protein bacteriorhodopsin into polymerized bilayers composed of a diacetylenic phosphatidylcholine, 1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine (DC8,9PC) and a non-polymerizable phospholipid, dinonanoylphosphatidylcholine (DNPC). The extent of DC8,9PC polymerization in the bilayer was significantly improved when 2:1 mole ratio DNPC-DC8,9PC was used. Octyl glucopyranoside-solubilized bacteriorhodopsin was inserted into the polymerized DNPC-DC8,9PC bilayers by overnight incubation at 4 degrees C followed by dialysis to remove the detergent. The protein was inserted into the membranes after photo-polymerization to avoid inactivation of the protein due to the UV irradiation. The insertion of bacteriorhodopsin into the polymerized DNPC-DC8,9PC membranes was confirmed by density gradient centrifugation, UV/visible spectroscopy, and freeze fracture electron microscopy. The polymerized DNPC-DC8,9PC membranes containing bacteriorhodopsin were about 10% protein by weight. These results suggest that mixed lipid systems such as the DNPC-DC8,9PC can be used to improve both the extent of polymerization and the efficiency of membrane protein incorporation in the polymerized bilayer.     

Liposome/DNA systems: correlation between association, hydrophobicity and cell viability

Small unilamellar vesicles associated with plasmid DNA showed maximum association efficiency for a cationic mixture of egg phosphatidylcholine (EPC):1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE):di-1,2-dioleoyl-3-trimethyl ammonium propane (DOTAP) (16:8:1 molar ratio) [65%], followed by neutral lipids EPC:1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE):cholesterol (Chol) (2:2:1 molar ratio) [30%], and a polymerized formulation 1,2-bis(10,12-tricosadiynoyl)sn-glycero-3-phosphocholine (DC8,9PC):DMPE:Chol (2:2:1 molar ratio) [11%]. The hydrophobicity factor (HF) for these formulations followed the trend DC8,9PC:DMPE:CHOL < EPC:DMPE:Chol < EPC:DOPE DOTAP, and DNA association did not alter this trend. Results suggest that the higher the HF value, the more fluid the membrane and the higher the efficiency of DNA association. On the other hand, no differences were observed in cell toxicity with lipids up to 1 mg/ml in VERO cells.     

Structure of polymerizable lipid bilayers IV. Mixtures of long chain diacetylenic and short chain saturated phosphatidylcholines and analogous asymmetric isomers.

Polymerization of 1,2-bis(tricosa-10,12-diynoyl)-sn-glycero-3-phosphocholine (DC8,9PC) is enhanced by addition of short-chain saturated phosphatidylcholines such as 1,2-dinonanoyl-sn-glycero-3- phosphocholine (DNPC). Because of well established constraints on the topochemical polymerisation process, we undertook structure-based experiments to determine the nature of this effect. Two hypotheses were tested: (a) that the DNPC crystalized the proximal (m) and disordered the distal (n) methylene segments of DC8,9PC, thus providing flexibility to accommodate the conformational change upon polymer formation, or (b) that the DNPC forced lateral displacement of DC8,9PC, which would then allow interdigitation of these segments with those of the opposing monolayer and potentially more crystalline alignment of the diacetylene. Low angle X-ray diffraction studies do not support the interdigiated chain model. However, these measurements also indicate that the two lipid species may be phase separated under many conditions. An analogous structure, 1-(tricosa-10,12-diynoyl)2-nonanoyl-sn-glycero-3- phosphocholine (C8,9NPC) did not polymerize, and low angle X-ray diffraction studies indicate that bilayers of this lipid were interdigitated such that the terminal methyl group of the tricosadiynoyl chain on each lipid in the bilayer was adjacent to the diacetylenic moiety of a lipid on the opposing monolayer. Implications of these findings pertinent to identifying significant factors in polymerization of diacetylenic phospholipid bilayers are discussed.     

2H and 31P NMR study of pentalysine interaction with headgroup deuterated phosphatidylcholine and phosphatidylserine

The interaction of cationic pentalysine with phospholipid membranes was studied by using phosphorus and deuterium Nuclear Magnetic Resonance (NMR) of headgroup deuterated dimyristoyl phosphatidylcholine (DMPC) and dimyristoyl phosphatidylserine (DMPS). In the absence of pentalysine, some of the deuterium and phosphorus spectra of DMPC/DMPS 5:1 (m:m) membranes gave lineshapes similar to those of partially-oriented bilayers with the planes of the bilayers being parallel to the magnetic field. The deuterium NMR data show that the quadrupolar splittings of the deuterated methylenes of the DMPC headgroup are not affected by adsorption of pentalysine on the PC/PS membranes. By contrast, the pentalysine produces significant changes in the quadrupolar splittings of the negatively charged DMPS headgroup. The results are discussed in relation to previous ²H NMR investigations of phospholipid headgroup perturbations arising from bilayer interaction with cationic molecules.Abbreviations NMR nuclear magnetic resonance - DMPC 1,2-dimyristoyl-sn-glycero-3-phosphocholine - DMPS 1,2-dimyristoyl-sn-glycero-3-phosphoserine - POPC 1-palmitoyl, 2-oleyl-sn-glycero-3-phosphocholine - POPG 1-palmitoyl-2-oleyl-sn-glycero-3-phosphoglycerol - PC phosphatidylcholine - PS phosphatidyl serine - PG phosphatidylglycerol - HEPES N-(2-hydroxy-ethyl)piperazine-N-2-ethanesulfonic acid - TRIS tris-(hydroxymethyl)aminoethane - EDTA ethylenediamine-tetra-acetic acid     

Structure of polymerizable lipid bilayers. I--1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine, a tubule-forming phosphatidylcholine

This report presents the first X-ray diffraction data on diacetylenic phospholipids. The tubule-forming polymerizable lipid, 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DC8,9PC), was studied by low angle X-ray diffraction from partially dehydrated oriented multibilayers in both polymerized and unpolymerized form. Bilayers of this material were found to be highly ordered, yielding as many as 16 orders of lamellar diffraction, in both the polymerized and unpolymerized states. The unit cell dimension was very small for a lipid of this size. In addition to the features usually observed in the electron density profile structure of phospholipid bilayers, the electron-dense diacetylenic portions of the fatty acyl chain produced electron density maxima at two well-defined levels on each side of the bilayer approximately 15 A and 9 A from the bilayer midplane. A model molecular conformation deduced from the one-dimensional electron density map features all-trans acyl chains tilted at approximately 28 degrees from the bilayer normal that are interdigitated with chains of the opposing monolayer by approximately two carbons at the bilayer center. The linear diacetylene moieties on beta- and gamma-chains appear at different positions along the bilayer normal axis and are roughly parallel to the bilayer surface. This model is discussed in terms of a polymerization mechanism.     

Effect of Membrane Composition on Antimicrobial Peptides Aurein 2.2 and 2.3 From Australian Southern Bell Frogs

The effects of hydrophobic thickness and the molar phosphatidylglycerol (PG) content of lipid bilayers on the structure and membrane interaction of three cationic antimicrobial peptides were examined: aurein 2.2, aurein 2.3 (almost identical to aurein 2.2, except for a point mutation at residue 13), and a carboxy C-terminal analog of aurein 2.3. Circular dichroism results indicated that all three peptides adopt an α-helical structure in the presence of a 3:1 molar mixture of 1,2-dimyristoyl-sn-glycero-3-phosphocholine/1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DMPC/DMPG), and 1:1 and 3:1 molar mixtures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPC/POPG). Oriented circular dichroism data for three different lipid compositions showed that all three peptides were surface-adsorbed at low peptide concentrations, but were inserted into the membrane at higher peptide concentrations. The ³¹P solid-state NMR data of the three peptides in the DMPC/DMPG and POPC/POPG bilayers showed that all three peptides significantly perturbed lipid headgroups, in a peptide or lipid composition-dependent manner. Differential scanning calorimetry results demonstrated that both amidated aurein peptides perturbed the overall phase structure of DMPC/DMPG bilayers, but perturbed the POPC/POPG chains less. The nature of the perturbation of DMPC/DMPG bilayers was most likely micellization, and for the POPC/POPG bilayers, distorted toroidal pores or localized membrane aggregate formation. Calcein release assay results showed that aurein peptide-induced membrane leakage was more severe in DMPC/DMPG liposomes than in POPC/POPG liposomes, and that aurein 2.2 induced higher calcein release than aurein 2.3 and aurein 2.3-COOH from 1:1 and 3:1 POPC/POPG liposomes. Finally, DiSC₃5 assay data further delineated aurein 2.2 from the others by showing that it perturbed the lipid membranes of intact S. aureus C622 most efficiently, whereas aurein 2.3 had the same efficiency as gramicidin S, and aurein 2.3-COOH was the least efficient. Taken together, these data show that the membrane interactions of aurein peptides are affected by the hydrophobic thickness of the lipid bilayers and the PG content.     

Visible light-induced destabilization of endocytosed liposomes

The potential biomedical utility of the photoinduced destabilization of liposomes depends in part on the use of green to near infrared light with its inherent therapeutic advantages. The polymerization of bilayers can be sensitized to green light by associating selected amphiphilic cyanine dyes, i.e. the cationic 1,1'-dioctadecyl-3,3,3', 3'-tetramethylindocarbocyanine (DiI), or the corresponding anionic disulfonated DiI (DiI-DS), with the lipid bilayer. The DiI sensitization of the polymerization of 1, 2-dioleoyl-sn-glycero-3-phosphoethanolamine/1,2-bis[10-(2', 4'-hexadienoyloxy)-decanoyl]-sn-glycero-3-phosphocholine liposomes caused liposome destabilization with release of encapsulated aqueous markers. In separate experiments, similar photosensitive liposomes were endocytosed by cultured HeLa cells. Exposure of the cells and liposomes to 550 nm light caused a net movement of the liposome-encapsulated 8-hydroxypyrene-1,3,6-trisulfonic acid (HPTS) from low pH compartment(s) to higher pH compartment(s). This suggests that photolysis of DiI-labelled liposomes results in delivery of the contents of the endocytosed liposomes to the cytoplasm. The release of HPTS into the cytoplasm appears to require the photoactivated fusion of the labelled liposomes with the endosomal membrane. These studies aid in the design of visible light sensitive liposomes for the delivery of liposome-encapsulated reagents to the cytoplasm.     

Structural and functional comparisons of pH-sensitive liposomes composed of phosphatidylethanolamine and three different diacylsuccinylglycerols

The titratable, double-chain amphiphiles 1,2-dipalmitoyl-sn-3-succinylglycerol (1,2-DPSG), 1,2-dioleoyl-sn-3-succinylglycerol (1,2-DOSG) and 1,3-dipalmitoylsuccinylglycerol (1,3-DPSG) have been used in combination with phosphatidylethanolamine (PE) to form pH-sensitive liposomes. The effect of the compounds on dielaidoyl PE bilayer stabilization was examined by differential scanning calorimetry. Only 1,2-DPSG showed bilayer stabilization activity; whereas the other two are destabilizers at pH 7.4. All three amphiphiles became strong destabilizers at pH 5.0. The ability of the amphiphiles to stabilize DOPE liposomes was examined by light scattering and calcein entrapment. In general, 1,2-DPSG is the most potent stabilizer of PE bilayers while 1,3-DPSG is the weakest liposome stabilizer. All three compounds can be combined with DOPE to generate liposomes which are stable at neutral and basic pH. At weakly acidic pH, the liposomes are leaky and exhibit extensive lipid mixing, with protons and calcium showing synergistic effects on lipid mixing. DOPE/1,2-DPSG liposomes are stable in human plasma and remain acid-sensitive even after prolonged plasma incubation. Immunoliposomes prepared from either DOPE/1,2-DPSG or DOPE/1,2-DOSG can deliver diphtheria toxin A fragment to the cytoplasm of cultured cells in a process which involves endocytosis of the liposomes. Immunoliposomes prepared with 1,2-DPSG are more effective drug carriers than those prepared with 1,2-DOSG. These results indicate that the bilayer- and, hence the liposome-stabilization activity of the diacylsuccinylglycerol depends on the structure of the compounds. The potential drug delivery activity of the pH-sensitive liposomes composed of these lipids is discussed.     

Using micropatterned lipid bilayer arrays to measure the effect of membrane composition on merocyanine 540 binding

The lipophilic dye merocyanine 540 (MC540) was used to model small molecule-membrane interactions using micropatterned lipid bilayer arrays (MLBAs) prepared using a 3D Continuous Flow Microspotter (CFM). Fluorescence microscopy was used to monitor MC540 binding to fifteen different bilayer compositions simultaneously. MC540 fluorescence was two times greater for bilayers composed of liquid-crystalline (l.c.) phase lipids (1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC),1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine (SOPC), and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)) compared to bilayers in the gel phase (1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC)). The effect cholesterol (CHO) had on MC540 binding to the membrane was found to be dependent on the lipid component; cholesterol decreased MC540 binding in DMPC, DPPC and DSPC bilayers while having little to no effect on the remaining l.c. phase lipids. MC540 fluorescence was also lowered when 1,2-dioleoyl-sn-glycero-3-phospho-L-serine (sodium salt) (DOPS) was incorporated into DOPC bilayers. The increase in the surface charge density appears to decrease the occurrence of highly fluorescent monomers and increase the formation of weakly fluorescent dimers via electrostatic repulsion. This paper demonstrates that MLBAs are a useful tool for preparing high density reproducible bilayer arrays to study small molecule-membrane interactions in a high-throughput manner.     

Phosphatidylinositol induces fluid phase formation and packing defects in phosphatidylcholine model membranes

Liposomes consisted of phosphatidylinositol (PI) and phosphatidylcholine (PC) have been utilized as delivery vehicle for drugs and proteins. In the present work, we studied the effect of soy PI on physical properties of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) liposomes such as phase state of lipid bilayer, lipid packing and phase properties using multiple orthogonal biophysical techniques. The 6-dodecanoyl-2-dimethylamino naphthalene (Laurdan) fluorescence studies showed that presence of PI induces the formation of fluid phases in DMPC. Differential scanning calorimetry (DSC), temperature dependent fluorescence anisotropy measurements, and generalized polarization values for Laurdan showed that the presence of as low as 10mol% of PI induces substantial broadening and shift to lower temperature of phase transition of DMPC. The fluorescence emission intensity of DPH labeled, PI containing DMPC lipid bilayer decreased possibly due to deeper penetration of water molecules in lipid bilayer. In order to further delineate the effect of PI on the physico chemical properties of DMPC is due to either significant hydrophobic mismatch between the acyl chains of the DMPC and that of soy PI or due to the inositol head group, we systematically replaced soy PI with PC species of similar acyl chain composition (DPPC and 18:2 (Cis) PC) or with diacylglycerol (DAG), respectively. The anisotropy of PC membrane containing soy PI showed largest fluidity change compared to other compositions. The data suggests that addition of PI alters structure and dynamics of DMPC bilayer in that it promotes deeper water penetration in the bilayer, induces fluid phase characteristics and causes lipid packing defects that involve its inositol head group.     

Structure of Lipid Tubules Formed from a Polymerizable Lecithin

We have studied tubules formed from a polymerizable lipid in aqueous dispersion using freeze-fracture replication and transmission electron microscopy. The polymerizable diacetylenic lecithin 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine converts from liposomes to hollow cylinders, which we call tubules, on cooling through its chain melting phase transition temperature. These tubules differ substantially from cochleate cylinders formed by phosphatidylserines on binding of calcium. The tubules have diameters that range from 0.3 to 1 μm and lengths of up to hundreds of micrometers depending on conditions of formation. The thickness of the walls varies from as few as two bilayers to tens of bilayers in some longer tubules. Their surfaces may be either smooth, gently rippled, or with spiral steps depending on sample preparation conditions, including whether the lipids have been polymerized. The spiral steps may reflect the growth of the tubules by rolling up of flattened liposomes.     

Electric charge effects on phospholipid headgroups. Phosphatidylcholine in mixtures with cationic and anionic amphiphiles

The influence of electric surface charges on the polar headgroups and the hydrocarbon region of phospholipid membranes was studied by mixing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) with charged amphiphiles. A positive surface charge was generated with dialkyldimethylammonium salts and a negative surface charge with dialkyl phosphates. The POPC:amphiphile ratio and hence the surface charge density could be varied over a large range since stable liquid-crystalline bilayers were obtained even for the pure amphiphiles in water. POPC was selectively deuterated at both methylene segments of the choline moiety and at the cis double bond of the oleic acyl chain. Additional experiments were carried out with 1,2-dipalmitoyl-rac-glycero-3-phosphocholine labeled at the C-2 position of the glycerol backbone. Deuterium, phosphorus, and nitrogen-14 nuclear magnetic resonance (NMR) spectra were recorded for liquid-crystalline bilayers with varying concentrations of amphiphiles. Although the hydrocarbon region and the glycerol backbone were not significantly influenced by the addition of amphiphiles, very large perturbations of the phosphocholine headgroup were observed. Qualitatively, these results were similar to those observed previously with other cationic and anionic molecules and suggest that the electric surface charge is the essential driving force in changing the phospholipid headgroup orientation and conformation. While the P-N dipole is approximately parallel to the membrane surface in the pure phospholipid membrane, the addition of a positively charged amphiphile or the binding of cationic molecules moves the N+ end of the dipole toward the water phase, changing the orientation of the phosphate segment by more than 30 degrees at the highest amphiphile concentration.(ABSTRACT TRUNCATED AT 250 WORDS)     

Carboxylated phytosterol derivative-introduced liposomes for skin environment-responsive transdermal drug delivery system

Abstract

Transdermal drug delivery systems are a key technology for skin-related diseases and for cosmetics development. The delivery of active ingredients to an appropriate site or target cells can greatly improve the efficacy of medical and cosmetic agents. For this study, liposome-based transdermal delivery systems were developed using pH-responsive phytosterol derivatives as liposome components. Succinylated phytosterol (Suc-PS) and 2-carboxy-cyclohexane-1-carboxylated phytosterol (CHex-PS) were synthesized by esterification of hydroxy groups of phytosterol. Modification of phytosterol derivatives on 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) liposomes was confirmed by negatively zeta potentials at alkaline pH and the change of zeta potentials with decreasing pH. In response to acidic pH and temperatures higher than body temperature, Suc-PS-containing and CHex-PS-containing liposomes exhibited content release at intracellular acidic compartments of the melanocytes at the basement membrane of the skin. Phytosterol-derivative-containing liposomes were taken up by murine melanoma-derived B16-F10 cells. These liposomes delivered their contents into endosomes and cytosol of B16-F10 cells. Furthermore, phytosterol-derivative-containing liposomes penetrated the 3?D skin models and reached the basement membrane. Results show that pH-responsive phytosterol-derivative-containing DMPC liposomes are promising for use in transdermal medical or cosmetic agent delivery to melanocytes.     

Asymmetric lipid bilayer formation stabilized by DNA at the air/water interface

The lipid bis(guanidinium)-tren-cholesterol (BGTC) is a cationic cholesterol derivative bearing guanidinium polar headgroups used for gene transfection either alone or formulated as liposomes with the zwitterionic lipid 1,2-di-[cis-9-octadecenoyl]-sn-glycero-3-phosphoethanolamine (DOPE). Previous investigations have shown its ability to strongly interact with DNA and form asymmetric lipid bilayers at the air/water interface when mixed with DOPE. Here, with a view to further investigate its physicochemical behavior, we studied the interactions of mixtures of BGTC with another zwitterionic lipid, 1,2-Dimyristoyl-sn-Glycero-3-Phosphocholine, (DMPC), with DNA at the air/water interface by using the Langmuir monolayer technique coupled with Brewster Angle Microscopy (BAM) and Polarization Modulation Infra Red Reflexion Absorption (PMIRRAS) spectroscopy and we investigate DNA–BGTC/DMPC interactions. We demonstrate that when DNA is injected into the subphase in excess compared to the positive charges of BGTC, it adsorbs to BGTC/DMPC monolayers at 20 mN/m whatever the lipid monolayer composition (1/5, 2/3 or 3/2 BGTC/DMPC molar ratio) and forms an incomplete monolayer of either isotropic or anisotropic double strands depending on the BGTC content in the monolayer. Compression beyond the collapse of some mixed DNA–BGTC/DMPC (2/3 and 3/2 molar ratio) systems leads to the formation of DNA monolayers underneath asymmetric lipid bilayers characterized by a bottom layer of BGTC in contact with DNA and a top layer mainly constituted of DMPC.     

Cationic amphiphiles and the solubilization of cholesterol crystallites in membrane bilayers

Cationic amphiphiles used for transfection can be incorporated into biological membranes. By differential scanning calorimetry (DSC), cholesterol solubilization in phospholipid membranes, in the absence and presence of cationic amphiphiles, was determined. Two different systems were studied: 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)+cholesterol (1:3, POPC:Chol, molar ratio) and 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-l-serine] (POPS)+cholesterol (3:2, POPS:Chol, molar ratio), which contain cholesterol in crystallite form. For the zwitterionic lipid POPC, cationic amphiphiles were tested, up to 7 mol%, while for anionic POPS bilayers, which possibly incorporate more positive amphiphiles, the fractions used were higher, up to 23 mol%. 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and DOTAP in methyl sulfate salt form (DOTAPmss) were found to cause a small decrease on the enthalpy of the cholesterol transition of pure cholesterol aggregates, possibly indicating a slight increase on the cholesterol solubilization in POPC vesicles. With the anionic system POPS:Chol, the cationic amphiphiles dramatically change the cholesterol crystal thermal transition, indicating significant changes in the cholesterol aggregates. For structural studies, phospholipids spin labeled at the 5th or 16th carbon atoms were incorporated. In POPC, at the bilayer core, the cationic amphiphiles significantly increase the bilayer packing, decreasing the membrane polarity, with the cholesterol derivative 3 beta-[N-(N',N'-dimethylaminoethane)-carbamoyl]-cholesterol (DC-chol) displaying a stronger effect. In POPS and POPS:Chol, DC-chol was also found to considerably increase the bilayer packing. Hence, exogenous cationic amphiphiles used to deliver nucleic acids to cells can change the bilayer packing of biological membranes and alter the structure of cholesterol crystals, which are believed to be the precursors to atherosclerotic lesions.     

Membrane permeabilizing activity of amphotericin B is affected by chain length of phosphatidylcholine added as minor constituent

The effect of acyl-chain length of phospholipid on the membrane permeabilizing activity of amphotericin B (AmB) was examined using egg phosphatidylcholine (eggPC) liposomes containing 5% or 20% phosphatidylcholine with various lengths of fatty acyl chains from C(10) to C(18); 1,2-dicapryloyl-sn-glycero-3-phosphocholine (DCPC), 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC). The membrane activity of AmB was evaluated by two methods; the drug was added to a liposome suspension (added-via-aqua), or mixed with lipids prior to liposome preparation (mixed-with-lipid). In both cases, K(+) influx by AmB was measured as pH change inside liposomes by 31P-NMR. The C(10) and C(12) acyl phospholipids markedly enhanced the activity of AmB, the C(14) and C(16) lipids virtually showed no effect, and the C(18) lipid was inhibitory to the AmB's action. Clear distinction between the C(12) and C(14) lipids, which differ only in acyl chains by two carbons, implies that molecular interaction between phospholipid and AmB is partly due to the matching of their hydrophobic length.     

Structure of polymerizable lipid bilayers. V. Synthesis, bilayer structure and properties of diacetylenic ether and ester lipids.

Four diacetylenic phosphatidylcholines (PC's) have been synthesized and the structures of bilayers of these lipids have been determined at low resolution by low-angle X-ray diffraction. The PC's all have 18-carbon chains but differ with respect to the ether/ester linkage at the sn-1 and sn-2 positions and the relative position of the diacetylene moiety: diester-PC (1): 1,2-bis(octadeca-4',6'-diynoyl)-sn-glycero-3-phosphocholine diester-PC (2): 1-(octadeca-4',6'-diynoyl)-2-(octadeca-5',7'-diynoy l)-sn- glycero-3-phosphocholine diester-PC (3): 1,2-bis(octadeca-8',10'-diynoyl)-sn-glycerol-3-phosphocholin e diether-PC (4): 1-O-(octadeca-4',6'-diynyl)-2-O-(octadeca-5",7"-din yl)-sn- glycero-3-phosphocholine Only (1) exhibits the typical bilayer profile, whereas (2), (3) and (4) show evidence of interdigitation and/or significant disorder. Only (1) polymerized effectively upon illumination with 254 nm light, turning deep blue in seconds, indicating the formation of long, well-ordered polydiacetylenic structures. Liposomes of these derivatives were tested for permeability by osmotic swelling. Polymerized liposomes of (1) underwent osmotic swelling with urea, glycerol, and acetamide more rapidly than did liposomes of stearoyl-oleoyl-PC, but the initial rates of osmotic swelling of polymerized liposomes of (1) were 3-10-times lower than those of unpolymerized liposomes of (1). Blue polymerized multilayer samples of (1) exhibited an irreversible thermochromic transition to red at approx. 40 degrees C. Differential scanning calorimetry with liposome suspensions of (1) revealed an endotherm at 28.3 degrees C with a transition enthalpy of 40 J/g. PC (1) is a potentially useful diacetylenic lipid which exhibits facile, complete polymerization and a bilayer thickness comparable to that of biomembrane lipids.