Glucose biosensor based on the room-temperature phosphorescence of TiO2/SiO2 nanocomposite

The direct immobilization of glucose oxidase (GOD) on TiO₂/SiO₂ nanocomposite and its application as glucose biosensor were investigated. The room-temperature phosphorescence of TiO₂/SiO₂ nanocomposite can be quenched by hydrogen peroxide (H₂O₂). The detection of glucose may be accomplished by monitoring the formation of hydrogen peroxide which generated in the oxidation process of glucose with the catalysis of GOD. To our surprise, by using a 96-hole polyporous plate accessory of fluorescence spectrophotometer, the biosensor exhibits excellent linear response to glucose concentrations ranging from 1.0 × 10⁻⁹ to 1.0 × 10⁻² M with a detection limit of 1.2 × 10⁻¹⁰ M. The TiO₂/SiO₂ nanocomposite can be used as both supporting material and signal transducer. The phosphorescence intensity and color of the biosensor change obviously and even could be observed with naked eyes by continuous addition of glucose. Based on the room-temperature phosphorescence of TiO₂/SiO₂ nanocomposite, a new method of solid substrate-room-temperature phosphorimetry (SS-RTP) for glucose determination is proposed. A glucose biosensor was fabricated with wide determination concentration range, low detection limit, high sensitivity, and fast response time. And the biosensor has been successfully applied to the determination of glucose in human blood serum. The coacervation of GOD enzyme and its interaction with TiO₂/SiO₂ nanocomposite enlarge the surface area and enhance the chemical stability of GOD. The nice biocompatibility, large surface area, good chemical stability and nontoxicity of the TiO₂/SiO₂ nanocomposite have made this material suitable for functioning as biosensor.     

A nanocomposite/crude extract enzyme-based xanthine biosensor

A novel amperometric biosensor for xanthine was developed based on covalent immobilization of crude xanthine oxidase (XOD) extracted from bovine milk onto a hybrid nanocomposite film via glutaraldehyde. Toward the preparation of the film, a stable colloids solution of core–shell Fe₃O₄/polyaniline nanoparticles (PANI/Fe₃O₄ NPs) was dispersed in solution containing chitosan (CHT) and H₂PtCl₆ and electrodeposited over the surface of a carbon paste electrode (CPE) in one step. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectrophotometry, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) were used for characterization of the electrode surface. The developed biosensor (XOD/CHT/Pt NPs/PANI/Fe₃O₄/CPE) was employed for determination of xanthine based on amperometric detection of hydrogen peroxide (H₂O₂) reduction at –0.35 V (vs. Ag/AgCl). The biosensor exhibited a fast response time to xanthine within 8 s and a linear working concentration range from 0.2 to 36.0 μM (R² = 0.997) with a detection limit of 0.1 μM (signal/noise [S/N] = 3). The sensitivity of the biosensor was 13.58 μA μM⁻¹ cm⁻². The apparent Michaelis–Menten (K_m) value for xanthine was found to be 4.7 μM. The fabricated biosensor was successfully applied for measurement of fish and chicken meat freshness, which was in agreement with the standard method at the 95% confidence level.     

Development of tyrosinase biosensor based on quantum dots/chitosan nanocomposite for detection of phenolic compounds

A sensitive and simple amperometric biosensor for phenols was developed based on the immobilization of tyrosinase into CdS quantum dots/chitosan nanocomposite matrix. The nanocomposite film with porous nanostructure, excellent hydrophilicity and biocompatibility resulted in high enzyme loading, and the tyrosinase (Tyr) immobilized in this novel matrix retained its activity to a large extent. The CdS quantum dots/chitosan nanocomposite film was characterized by scanning electron microscopy and electrochemical impedance spectroscopy, and the parameters of the various experimental variables for the biosensor were optimized. Under the optimal conditions, the designed biosensor displayed a wide linear response to catechol over a concentration range of 1.0 × 10⁻⁹ to 2.0 × 10⁻⁵ M with a high sensitivity of 561 ± 9.7 mA M⁻¹ and a low detection limit down to 0.3 nM at a signal-to-noise ratio of 3. The CdS quantum dots/chitosan nanocomposites could provide a novel matrix for enzyme immobilization to promote the development of biosensing and biocatalysis.     

Enhanced electrochemiluminescence from luminol at carboxyl graphene for detection of α-fetoprotein

In this study, a novel sensitive electrochemiluminescence (ECL) immunosensor was constructed by carboxyl graphene (GR) for enhancing luminol–O₂ system emission. Here, carboxyl GR was used to enhance the ECL intensity of luminol that had excellent electron transfer ability and good solubility. The sensing platform was constructed by depositing carboxyl GR on electrodes and immobilizing antibodies on the surface of carboxyl GR through amidation. The specific immunoreaction between α-fetoprotein (AFP) and antibodies resulted in a decrease of ECL intensity, and the intensity decreased linearly with AFP concentrations in the range of 5 pg ml⁻¹ to 14 ng ml⁻¹ with a detection limit of 2.0 pg ml⁻¹. The proposed immunosensor exhibits high specificity, good reproducibility, and longtime stability. It may become a promising technique for protein detection.     

Biosensor based on the biocatalysis of microperoxidase-11 in nanocomposite material of multiwalled carbon nanotubes/room temperature ionic liquid for amperometric determination of hydrogen peroxide

A novel nanocomposite material of multiwalled carbon nanotubes (MWCNTs) and room temperature ionic liquid (RTIL) N-butylpyridinium hexafluorophosphate (BPPF₆) was explored and used to construct a novel microperoxidase-11 (MP-11) biosensor for the determination of hydrogen peroxide (H₂O₂). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to characterize the performance of the biosensor. Under the optimized experimental conditions, H₂O₂ could be detected in a linear calibration range of 0.5 to 7.0 × 10⁻⁷ mol L⁻¹ with a correlation coefficient of 0.9949 (n = 9) and a detection limit of 3.8 × 10⁻⁹ mol L⁻¹ at 3σ. The modified electrodes displayed excellent electrochemical response, high sensitivity, long-term stability, and good bioactivity and selectivity.     

Electrochemiluminescent biosensing of carbohydrate-functionalized CdS nanocomposites for in situ label-free analysis of cell surface carbohydrate

A facile electrochemiluminescent (ECL) strategy for in situ label-free monitoring of carbohydrate expression on living cells was designed by integrating the specific recognition of lectin to carbohydrate with a carbohydrate-functionalized CdS nanocomposite. The mercaptopropionic acid-capped CdS quantum dots were firstly immobilized on carbon nanotubes modified electrode and then functionalized with carbohydrate using mannan as a model on the surface. The carbohydrate-functionalized CdS nanocomposite showed high ECL sensitivity and good stability, and could be used for competitive recognition to concanavalin A with the target cells in solution, which led to a change of ECL intensity due to the resistance of concanavalin A. The change depended on both the cell number and the expression level of cell surface carbohydrate. A wide linear response to cells ranging from 2×10(3) to 1×10(7) cells mL(-1) with a detection limit of 1.2×10(3) cells mL(-1) was obtained. The proposed biosensor could be used to in situ evaluate cell surface glycan, and the average number of mannose moieties on single living BGC cell was detected to be 8.7×10(7). This sensitive strategy was further used for facile monitoring of dynamic carbohydrate expression on living cells in response to drugs. The proposed method could be further expanded to high-throughput detection with the addition of more specific glycan-lectin pairs to the repertoire.     

The development of an electrochemical immunosensor using a thiol aromatic aldehyde and PAMAM-functionalized Fe3O4@Au nanoparticles

In this work, a novel thiol aromatic aldehyde was synthesized. It can be used as a substrate to directly immobilize antibodies on a gold electrode, for which no additional chemical cross-linker is required. It was also applied as a linker to prepare Fe₃O₄@Au/PAMAM/Ab₂–horseradish peroxidase bioconjugates, which introduced multiple enzymes onto a sensing interface owing to the high surface-to-volume ratio of Fe₃O₄@Au nanoparticles and many functional groups of the poly(amidoamine) dendrimer (PAMAM). The introduced multiple enzymes greatly improved the detection signal. Under optimal conditions, the proposed electrochemical immunosensor exhibited desirable performance for detection of IgG in the range 0.005–50 ng ml⁻¹ with a detection limit of 3 pg ml⁻¹ based on a signal-to-noise ratio of 3. It has great potential application in the area of clinical analysis.     

Deposition of iron titanate/titania ceramic composite thin films from a single molecular precursor

A heterobimetallic single molecular precursor, [Fe₂Ti₄(μ-O)₆(TFA)₈(THF)₆] (1) [TFA = trifluoroacetate, THF = tetrahydrofuran], was synthesized by the simple reaction of [Fe₃O(OAc)₆(H₂O)₃]NO₃·4H₂O [OAc = acetato] with tetrakis(2-ethoxyethanalato)titanium(IV) in the presence of trifluoroacetic acid in THF. The synthesized precursor was analyzed by melting point, CHN analysis, FTIR, single crystal X-ray diffraction and thermogravimetric analysis. Complex (1) crystallizes in the orthorhombic space group Pca2₁ with cell dimensions a = 19.2114(14), b = 20.4804(15) and c = 17.2504(12) Å, and the complex undergoes thermal decomposition at 490 °C to give a residual mass corresponding to an Fe₂TiO₅-TiO₂ composite mixture. The synthesized precursor was utilized for deposition of Fe₂TiO₅-TiO₂ composite thin films by aerosol-assisted chemical vapor deposition (AACVD) on glass substrates at 500 °C using argon as the carrier gas. Scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and X-ray powder diffraction (XRD) analyses of the thin films suggest the formation of good quality crystalline thin films of an Fe₂TiO₅-TiO₂ composite with an average grain size of 0.105-0.120 μm.     

An ultrasensitive electrochemiluminescent sensor based on a pencil graphite electrode modified with CdS nanorods for detection of chlorogenic acid in honeysuckle

In this paper, a novel and ultrasensitive electrochemiluminescent sensor employing a solvothermal‐synthesized CdS nanorod‐modified pencil graphite electrode (CdS/PGE) for the determination of chlorogenic acid (CA) is fabricated. In the first step, the PGE surface is modified using CdS nanorods. In the next step, the developed electrode is used to detect CA using a electrochemiluminescent (ECL) technique, in which potassium persulfate (K₂S₂O₈) served as a co‐reactant. The possible ECL mechanism is investigated, and the influences of pH and cyclic voltammetric scanning rate on the signal response are studied. The ECL intensity decreases quantitatively in relation to the concentration of the target molecule. Under optimized conditions, the linear correlation between the quenched ECL intensity and the logarithm of CA concentration is observed in the range from 2 × 10^?9 to 8 × 10^?7 mol L^?1 with a limit of detection of 1 × 10^?9 mol L^?1. This proposed method is applied to the analysis of CA in honeysuckle flower, giving recoveries of 99‐107%. The experimental results demonstrate that this ECL sensor shows good stability and reproducibility.     

Liposomes containing alkylated methotrexate analogues for phospholipase A2 mediated tumor targeted drug delivery

Two lipophilic methotrexate analogues have been synthesized and evaluated for cytotoxicity against KATO III and HT-29 human colon cancer cells. Both analogues contained a C₁₆-alkyl chain attached to the γ-carboxylic acid and one of the analogues had an additional benzyl group attached to the α-carboxylic acid. The cytotoxicity of the γ-alkylated compound towards KATO III (IC₅₀ = 55 nM) and HT-29 (IC₅₀ = 400 nM) cell lines, was unaffected by the alkylation, whereas the additional benzyl group on the α-carboxyl group made the compound nontoxic. The γ-derivative with promising cytotoxicity was incorporated into liposomes that were designed to be particularly susceptible to a liposome degrading enzyme, secretory phospholipase A₂ (sPLA₂), which is found in high concentrations in tumors of several different cancer types. Liposome incorporation was investigated by differential scanning calorimetry (DSC), and sPLA₂ hydrolysis was examined by fluorescence spectroscopy and high performance liquid chromatography (HPLC). The results showed that the methotrexate (MTX)-analogue could be incorporated into liposomes that were degradable by sPLA₂. However, the in vitro cytotoxicity of the MTX-liposomes against KATO III and HT-29 cancer cells was found to be independent of sPLA₂ hydrolysis, indicating that the alkylated MTX-analogue was available for cancer cell uptake even in the absence of liposome hydrolysis. Using a DSC based method for assessing the anchoring stability of alkylated compounds in liposomes, it was demonstrated that the MTX-analogue partitioned into the water phase and thereby became available for cell uptake. It was concluded that liposomes containing alkylated MTX-analogues show promise as a drug delivery system, although the MTX-analogue needs to be more tightly anchored to the liposomal carrier. Also, the developed DSC-assay for studying the anchoring stability of alkylated drugs will be a useful tool in the development of liposomal drug delivery systems.     

Electrocatalytic activity of core/shell magnetic nanocomposite

Electrically active magnetic nanocomposites (EAMNCs), Au nanoparticles/self-doped polyaniline@Fe₃O₄ (AuNPs/SPAN@Fe₃O₄) with well-defined core/shell structure, were first synthesized by a simple method. The morphology and composition of the as-synthesized AuNPs/SPAN@Fe₃O₄ nanocomposite have been characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FT–IR), ultraviolet–visible (UV–Vis), X-ray powder diffraction (XRD), and thermogravimetric analysis (TGA). Horseradish peroxidase (HRP)–AuNPs/SPAN@Fe₃O₄ biocomposites were immobilized onto the surface of indium tin oxide (ITO) electrode to construct an amperometric hydrogen peroxide (H₂O₂) biosensor. The effects of HRP dosage, solution pH, and the working potential on the current response toward H₂O₂ reduction were optimized to obtain the maximal sensitivity. Under the optimal conditions, the proposed biosensor exhibited a linear calibration response in the range of 0.05 to 0.35 mM and 0.35 to 1.85 mM, with a detection limit of 0.01 mM (signal-to-noise ratio = 3). The modified electrode could virtually eliminate the interference of ascorbic acid (AA) and uric acid (UA) during the detection of H₂O₂. Furthermore, the biosensor was applied to detect H₂O₂ concentration in real samples, which showed acceptable accuracy with the traditional potassium permanganate titration.     

Sirtuin 1 evaluation with a novel immunoassay approach based on TiO2–Au label and hyperbranched polymer hybrid

Accurate and highly sensitive evaluation of the sirtuin 1 (SirT1) level is becoming increasingly important for understanding the contribution of SirT1 in metabolism pathways. Here, a novel electrochemical immunoassay of SirT1 based on crosslinked hyperbranched azo-polymer decorated with gold colloids (Au–HAP) as sensing platform and titanium dioxide (TiO₂)–Au nanocomposites to immobilize secondary antibody–horseradish peroxidase (Ab₂–HRP) as electrochemical labels has been designed. Greatly enhanced sensitivity was achieved by exploiting the excellent conductivity of Au nanoparticle, the amplification effect of Au–HAP and TiO₂–Au, and the favorable catalytic ability of HRP. The nanocomposites of Au–HAP and TiO₂–Au could attach numerous capture antibodies on the surface for significant immune recognition efficiency. Meanwhile, the TiO₂–Au-labeled Ab₂–HRP using an HRP–thionine–H₂O₂ (hydrogen peroxide) detection system could further induce signal readout. Under optimal conditions, the signal intensity was linearly related to the concentration of SirT1 in the range of 1–500 ng ml⁻¹, and the limit of detection was 0.28 ng ml⁻¹. The developed biosensor exhibits attractive performance for the analysis of SirT1, with rapid response, high sensitivity, and high accuracy, and could become a promising technique for protein detection.     

Altered Ca signaling in cancer cells: Proto-oncogenes and tumor suppressors targeting IP3 receptors

Proto-oncogenes and tumor suppressors critically control cell-fate decisions like cell survival, adaptation and death. These processes are regulated by Ca^2 + signals arising from the endoplasmic reticulum, which at distinct sites is in close proximity to the mitochondria. These organelles are linked by different mechanisms, including Ca^2 +-transport mechanisms involving the inositol 1,4,5-trisphosphate receptor (IP₃R) and the voltage-dependent anion channel (VDAC). The amount of Ca^2 + transfer from the endoplasmic reticulum to mitochondria determines the susceptibility of cells to apoptotic stimuli. Suppressing the transfer of Ca^2 + from the endoplasmic reticulum to the mitochondria increases the apoptotic resistance of cells and may decrease the cellular responsiveness to apoptotic signaling in response to cellular damage or alterations. This can result in the survival, growth and proliferation of cells with oncogenic features. Clearly, proper maintenance of endoplasmic reticulum Ca^2 + homeostasis and dynamics including its links with the mitochondrial network is essential to detect and eliminate altered cells with oncogenic features through the apoptotic pathway. Proto-oncogenes and tumor suppressors exploit the central role of Ca^2 + signaling by targeting the IP₃R. There are an increasing number of reports showing that activation of proto-oncogenes or inactivation of tumor suppressors directly affects IP₃R function and endoplasmic reticulum Ca^2 + homeostasis, thereby decreasing mitochondrial Ca^2 + uptake and mitochondrial outer membrane permeabilization. In this review, we provide an overview of the current knowledge on the proto-oncogenes and tumor suppressors identified as IP₃R-regulatory proteins and how they affect endoplasmic reticulum Ca^2 + homeostasis and dynamics.     

Protective role of S-adenosyl-l-methionine against hydrochloric acid stress in Saccharomyces cerevisiae

S-adenosyl-l-methionine (AdoMet, 1 mM) protects the stationary phase cells of Saccharomyces cerevisiae against the killing effect of acid (10 mM HCl, pH ∼ 2). Both the acid and the acid plus AdoMet treatment for 2 h increased the plasma membrane H⁺-ATPase activity; thereafter it decreased to the basal level. AdoMet partially recovered the intracellular pH (pH_in) that dropped in presence of acid. AdoMet treatment facilitated acid induced phospholipid biosynthesis as well as membrane proliferation, which was reflected in the cellular lipid composition.     

Electrochemiluminescent pH sensor measured by the emission potential of TiO2 nanocrystals and its biosensing application

This work reports for the first time a potential‐based nano‐electrochemiluminescent (ECL) pH sensor, using anatase TiO₂ nanocrystals (NCs) as the ECL probe. The first ECL peak potential of the TiO₂ NCs shifted negatively with increasing pH, showing a linear range from −0.47 V (vs Ag/AgCl) at pH 3 to −1.06 V at pH 10. This phenomenon was attributed to the absorption of ‘potential‐determining ions’ of OH⁻ on the surface of TiO₂ NCs, leading to larger impedance of the electron injection. Other common ‘potential‐determining ions’, such as phosphate, induced a slight potential shift of 0.03 V at a concentration of 0.1 M. Using urease as an enzyme model, a urea biosensor was developed by the simultaneous modification of urease and TiO₂ NCs on indium–tin oxide (ITO) electrodes. The biosensor, measured on the basis of the pH increase caused by the enzyme catalysis reaction, had a linear range of 0.01–2.0 mM, with a potential shift of 0.175 V. The as‐prepared pH sensor, which has simple construction procedures and acceptable sensitivity and selectivity, may provide new avenues for the construction of ECL bioanalytical methodologies. Copyright © 2014 John Wiley & Sons, Ltd.     

“Off-On”switching electrochemiluminescence biosensor for mercury(II) detection based on molecular recognition technology

A novel “off-On” electrogenerated chemiluminescence (ECL) biosensor has been developed for the detection of mercury(II) based on molecular recognition technology. The ECL mercury(II) biosensor comprises two main parts: an ECL substrate and an ECL intensity switch. The ECL substrate was made by modifying the complex of Ruthenium(II) tris-(bipyridine)(Ru(bpy)₃²⁺)/Cyclodextrins-Au nanoparticles(CD-AuNps)/Nafion on the surface of glass carbon electrode (GCE), and the ECL intensity switch is the single hairpin DNA probe designed according to the “molecular recognition” strategy which was functionalized with ferrocene tag at one end and attached to Cyclodextrins (CD) on modified GCE through supramolecular noncovalent interaction. We demonstrated that, in the absence of Hg(II) ion, the probe keeps single hairpin structure and resulted in a quenching of ECL of Ru(bpy)₃²⁺. Whereas, in the presence of Hg(II) ion, the probe prefers to form the T-Hg(II)-T complex and lead to an obvious recovery of ECL of Ru(bpy)₃²⁺, which provided a sensing platform for the detection of Hg(II) ion. Using this sensing platform, a simple, rapid and selective “off-On” ECL biosensor for the detection of mercury(II) with a detection limit of 0.1 nM has been developed.     

Low-temperature electron transfer suggests two types of QA in intact photosystem II

The correlation between the reduction of Q_A and the oxidation of Tyr_Z or Car/Chl_Z/Cyt_b559 in spinach PSII enriched membranes induced by visible light at 10 K is studied by using electron paramagnetic resonance spectroscopy. Similar g = 1.95-1.86 Q_A^-•EPR signals are observed in both Mn-depleted and intact samples, and both signals are long lived at low temperatures. The presence of PPBQ significantly diminished the light induced EPR signals from Q_A^-•, Car^+•/Chl^+• and oxidized Cyt_b559, while enhancing the amplitude of the S₁Tyr_Z• EPR signal in the intact PSII sample. The quantification and stability of the g = 1.95-1.86 EPR signal and signals arising from the oxidized Tyr_Z and the side-path electron donors, respectively, indicate that the EPR-detectable g = 1.95-1.86 Q_A^-• signal is only correlated to reaction centers undergoing oxidation of the side-path electron donors (Car/Chl_Z/Cyt_b559), but not of Tyr_Z. These results imply that two types of Q_A^-• probably exist in the intact PSII sample. The structural difference and possible function of the two types of Q_A are discussed.     

Dye-sensitized photocurrents and adsorption properties of merocyanine dye at atomically flat rutile (1 1 0) and (1 0 0) TiO2 surfaces

The crystal-face dependence of the dye-sensitized photocurrents and the adsorption properties of benzothiazole merocyanine (Mc[18,1]) dye molecules were investigated, using atomically flat (1 0 0) and (1 1 0) TiO₂ single crystal surfaces. From the estimation of the amount of the transferred charge from the TiO₂ surface to CO groups of dye molecules based on NEXAFS data, it was revealed that the interaction of the adsorbed molecules and the (1 1 0) surface was much stronger than that for the (1 0 0) surface. On the other hand, the absorbed photon to current conversion efficiency (APCE) value was almost the same for both surfaces. We suggested a possible explanation as follows: the energy difference between the LUMO of Mc[18,1] and the conduction band of TiO₂ was large enough to give a nearly 100% quantum efficiency of electron transfer from photoexcited dye to TiO₂, which made the difference in the interaction between dye molecules and TiO₂ not apparent. The incident photon to current conversion efficiency (IPCE) for the (1 0 0) surface was much larger than that for the (1 1 0) surface, which was explained by the fact that the amount of the adsorbed dye molecules on the (1 0 0) surface was larger than on the (1 1 0) surface, probably due to the larger surface density of five-coordinated Ti sites in the former surface.     

Interfacial electron transfer on TiO2 sensitized with an axially anchored trans tetradentate Ru(II) compound

The ruthenium complexes, trans-[Ru(phen-NH-phen)(eina)₂](PF₆)₂ and trans-[Ru(phen-NH-phen)(ina)₂](PF₆)₂ where phen-NH-phen = N,N-bis(1,10-phenanthroline-2-yl)amine, ina = isonicotinic acid and eina = ethyl isonicotinate, have been synthesized and characterized by ¹H NMR, elemental analysis, and IR spectroscopy. The compounds were non-emissive at room temperature, but displayed intense photoluminescence in 4:1 ethanol/methanol glasses at 77 K with corrected emission maximum at 570-580 nm. A quasi-reversible wave observed in cyclic voltammetry experiments was assigned to the Ru^III/II couple, E° (trans-[Ru(phen-NH-phen)(eina)₂)^3+/2+ = +1.22 V versus Ag/AgCl. The trans-[Ru(phen-NH-phen)(ina)₂](PF₆)₂ compound was found to bind to nanocrystalline TiO₂ thin films from acetonitrile solution. Pulsed 532 nm excitation of trans-[Ru(phen-NH-phen)(ina)₂](PF₆)₂ anchored to mesoporous nanocrystalline TiO₂ thin films resulted in an absorption difference spectra consistent with the formation of an interfacial charge separated state trans-[Ru^III (phen-NH-phen)(ina)₂]⁺/TiO₂ (e⁻). The formation of this state could not be time resolved, consistent with rapid excited state injection into the TiO₂, k_inj > 10⁸ s⁻¹. Comparative measurements with a thin film actinometer yielded an injection quantum yield (?_inj) of 0.8. Charge recombination required milliseconds for completion and followed a bi-second-order equal concentration kinetic model with k₁ = 1.0 × 10⁸ s⁻¹, and k₂ = 3.0 × 10⁵ s⁻¹. In regenerative solar cells with 0.5 M LiI and 0.005 M I₂ in acetonitrile, incident photon-to-current efficiencies were typically less than 10%.     

Evaluation of whole lysosomal enzymes directly immobilized on titanium (IV) oxide used in the development of antimicrobial agents

Lysosomal enzymes isolated from egg white were directly immobilized on titanium (IV) oxide (TiO₂) particles using shaking methods (150 rpm, room temperature, 10 min), and the immobilization efficiency, activity, and stability of lysosomal enzymes immobilized on TiO₂ were evaluated. Of the various mass ratios (w/w) of lysosomal enzymes to TiO₂ tested, we found that 100% immobilization efficiency was observed at a ratio of 1:20 (enzymes:TiO₂; w/w). Furthermore, the antimicrobial activities of the immobilized lysosomal enzymes were confirmed using viable cell counts against Escherichia coli. Our results showed that the antimicrobial activity of immobilized lysosomal enzymes is stable and can be maintained up to one month, but the antimicrobial activity of free enzymes without immobilization completely disappeared after five days in storage. In addition, enhanced immobilization efficiency was shown in TiO₂ pretreated with a divalent, positively charged ion, Ca²⁺, and the antimicrobial activity for E. coli increased as a function of increasing ratio of immobilized enzymes. However, K⁺, a monovalent, positively charged ion, did not have any positive effect on immobilization or antimicrobial activity. Finally, we suggest that activity and stability of immobilized lysosomal enzymes can be maintained for a longer time than those properties of free lysosomal enzymes.