Structure and properties of regenerated Antheraea pernyi silk fibroin in aqueous solution

Antheraea pernyi silk fibroin fibers were dissolved by aqueous lithium thiocyanate to obtain regenerated A. pernyi silk fibroin solution. By means of circular dichroism, ¹³C NMR and Raman spectroscopy, the molecular conformation of regenerated A. pernyi silk fibroin in aqueous solution was investigated. The relationship of environmental factors and sol–gel transformation behavior of regenerated A. pernyi silk fibroin was also studied. The molecular conformations of regenerated A. pernyi silk fibroin mainly were -helix and random coil in solution. There also existed a little β-sheet conformation. It was obviously different with Bombyx mori silk fibroin, whose molecular conformation in solution was only random coil but no -helix existence. With the increase of temperature and solution concentration and with the decrease of solution pH value, the gelation velocity of regenerated A. pernyi silk fibroin solution increased. Especially, it showed that A. pernyi silk fibroin was more sensitive to temperature than B. mori silk fibroin during the sol–gel transformation. The velocity increased obviously when the temperature was above 30 °C. During the sol–gel transformation, the molecular conformation of regenerated A. pernyi silk fibroin changed from random coil to β-sheet structure. The results of these studies provided important insight into the preparation of new biomaterials by silk fibroin protein.     

Conformational transition and liquid crystalline state of regenerated silk fibroin in water

The conformational transition of molecular chains of regenerated silk fibroin (SF) aqueous solution is systematically investigated by circular dichroism, Raman, IR, and UV-vis spectroscopies. It is found that an initial random coil conformation of the SF can be readily changed into an ordered beta-sheet structure by optimizing the solution conditions, such as the SF concentration, pH, temperature, or metal-ion content. Circular dichroic spectra quantitatively confirm a steadily decreased content of the random coil conformation but a significantly increased beta-sheet content after an ultrasonic or extruding treatment. Furthermore, the extrusion is more powerful to achieve high beta-sheet content than the ultrasonic. It is interesting that the polarized optical micrographs of the SF aqueous solution extruded by injection illustrate the formation and existence of liquid crystalline state. A study of extrusion in vitro could be used as a model system to understand the natural silk spinning process in silkworm.     

Biodegradable materials based on silk fibroin and keratin

Wool and silk were dissolved and used for the preparation of blended films. Two systems are proposed: (1) blend films of silk fibroin and keratin aqueous solutions and (2) silk fibroin and keratin dissolved in formic acid. The FTIR spectra of pure films cast from aqueous solutions indicated that the keratin secondary structure mainly consists of alpha-helix and random coil conformations. The IR spectrum of pure SF is characteristic of films with prevalently amorphous structure (random coil conformation). Pure keratin film cast from formic acid shows an increase in the amount of beta-sheet and disordered keratin structures. The FTIR pattern of SF dissolved in formic acid is characteristic of films with prevalently beta-sheet conformations with beta-sheet crystallites embedded in an amorphous matrix. The thermal behavior of the blends confirmed the FTIR results. DSC curve of pure SF is typical of amorphous SF and the curve of pure keratin show the characteristic melting peak of alpha-helices for the aqueous system. These patterns are no longer observed in the films cast from formic acid due to the ability of formic acid to induce crystallization of SF and to increase the amount of beta-sheet structures on keratin. The nonlinear trend of the different parameters obtained from FTIR analysis and DSC curves of both SF/keratin systems indicate that when proteins are mixed they do not follow additives rules but are able to establish intermolecular interactions. Degradable polymeric biomaterials are preferred candidates for medical applications. It was investigated the degradation behavior of both SF/keratin systems by in vitro enzymatic incubation with trypsin. The SF/keratin films cast from water underwent a slower biological degradation than the films cast from formic acid. The weight loss obtained is a function of the amount of keratin in the blend. This study encourages the further investigation of the type of matrices presented here to be applied whether in scaffolds for tissue engineering or as controlled release drug delivery vehicles.     

Investigation of rheological properties and conformation of silk fibroin in the solution of AmimCl

The conformation and eventual morphology of silk fibroin (SF) chains are crucial for the mechanical properties of SF materials, and are strongly related to the solvation step as a key stage in their processing conditions. In this work, a novel SF/AmimCl (1-allyl-3-methylimidazolium chloride) solution with unique properties is reported and compared with conventional regenerated SF aqueous solutions, based on an investigation of its rheological properties. The steady shearing behavior suggested that AmimCl is a good solvent for SF molecules, and shear thinning of semidiluted SF/AmimCl solution at high shear rates showed behavior similar to that in native spinning, which is due to the rearrangement and orientation of SF molecular chains. Fitting of experimental dynamic viscoelastic data to the Rouse model provided an effective method to estimate the molecular weight of SF. We believe that this work not only provides a better understanding of the relationship between properties of silk protein and aggregation states of their molecular chains, but also provides tools to fabricate high-performance SF-based materials.     

Molecular weight distribution and solution properties of silk fibroins with different dissolution conditions

Four regenerated silk fibroin (SF) samples were prepared under different dissolution conditions and their molecular weight (MW) distributions and solution properties in water and formic acid were examined. SFL, produced by dissolving in LiBr aqueous solution for 6h, showed the highest MW level. In the three SFC samples, produced by dissolving SF in CaCl(2)/H(2)O/EtOH solution for dissolution times ranging from 3 to 180 min, the MW of the SFs decreased with increasing dissolution time and a new band appeared at low MW. Interestingly, SFL presented as a relatively transparent aqueous solution with 10-30 nm particle size, whereas the three SFC samples exhibited a turbid solution with 100-300 nm particle size. SF formic acid solutions showed a higher viscosity than SF aqueous solutions and exhibited almost Newtonian fluid behavior, whereas SF aqueous solutions displayed abrupt shear thinning in the low shear rate region (0.1-3 s(-1)).     

Nanofibrous nonmulberry silk/PVA scaffold for osteoinduction and osseointegration

Poly‐vinyl alcohol and nonmulberry tasar silk fibroin of Antheraea mylitta are blended to fabricate nanofibrous scaffolds for bone regeneration. Nanofibrous matrices are prepared by electrospinning the equal volume ratio blends of silk fibroin (2 and 4 wt%) with poly‐vinyl alcohol solution (10 wt%) and designated as 2SF/PVA and 4SF/PVA, respectively with average nanofiber diameters of 177 ± 13 nm (2SF/PVA) and 193 ± 17 nm (4SF/PVA). Fourier transform infrared spectroscopy confirms retention of the secondary structure of fibroin in blends indicating the structural stability of neo‐matrix. Both thermal stability and contact angle of the blends decrease with increasing fibroin percentage. Conversely, fibroin imparts mechanical stability to the blends; greater tensile strength is observed with increasing fibroin concentration. Blended scaffolds are biodegradable and support well the neo‐bone matrix synthesis by human osteoblast like cells. The findings indicate the potentiality of nanofibrous scaffolds of nonmulberry fibroin as bone scaffolding material. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 271–284, 2015.     

Solubility and rheological behavior of silk fibroin (Bombyx mori) in N-methyl morpholine N-oxide

As an important direct solvent for cellulose, N-methyl morpholine N-oxide (NMMO) is environmentally friendly, and potentially very economical. Silk fibroin (SF) (Bombyx mori) can also be dissolved directly in NMMO.H2O. However, it is unexpectedly difficult to obtain a silk fibroin solution with a concentration higher than 10wt.% in this way, and extensive degradation of silk fibroin occurs if the dissolution temperature is higher than 110 degrees C. On the other hand, it is found that regenerated silk fibroin (RSF) film is much easier to dissolve in NMMO.H2O than ordinary SF. The RSF in NMMO.H2O can be easily concentrated to a range from 10 to 25wt.%. The structural differences between the degummed silk fiber and the RSF film lead to this different solubility in NMMO.H2O. The rheological behavior of concentrated RSF/NMMO.H2O solutions were also investigated. Regenerated silk fiber was spun from this type of solution, and its strength can reach up to 3.07 cN/dtex.     

The natural silk spinning process. A nucleation-dependent aggregation mechanism?

The spinning mechanism of natural silk has been an open issue. In this study, both the conformation transition from random coil to beta sheet and the beta sheet aggregation growth of silk fibroin are identified in the B. mori regenerated silk fibroin aqueous solution by circular dichroism (CD) spectroscopy. A nucleation-dependent aggregation mechanism, similar to that found in prion protein, amyloid beta (Abeta) protein, and alpha-synuclein protein with the conformation transition from a soluble protein to a neurotoxic, insoluble beta sheet containing aggregate, is a novel suggestion for the silk spinning process. We present evidence that two steps are involved in this mechanism: (a) nucleation, a rate-limiting step involving the conversion of the soluble random coil to insoluble beta sheet and subsequently a series of thermodynamically unfavorable association of beta sheet unit, i.e. the formation of a nucleus or seed; (b) once the nucleus forms, further growth of the beta sheet unit becomes thermodynamically favorable, resulting a rapid extension of beta sheet aggregation. The aggregation growth follows a first order kinetic process with respect to the random coil fibroin concentration. The increase of temperature accelerates the beta sheet aggregation growth if the beta sheet seed is introduced into the random coil fibroin solution. This work enhances our understanding of the natural silk spinning process in vivo.     

Formation of silk fibroin matrices with different texture and its cellular response to normal human keratinocytes

Three forms of silk fibroin (SF) matrices, woven (microfiber), non-woven (nanofiber), and film form, were used to perform a conformational analysis and cell culture using normal human oral keratinocytes (NHOK). To obtain the SF microfiber (SF-M) matrix, natural grey silk was degummed, while the SF film (SF-F) and nanofiber (SF-N) matrices were prepared by casting and electrospinning the formic acid solutions of the regenerated SF, respectively. For insolubilization, as-prepared SF-F and SF-N matrices were chemically treated with an aqueous methanol solution of 50%. The conformational structures of as-prepared and chemically treated SF matrices were investigated using attenuated total reflectance infrared spectroscopy (ATR-IR) and solid-state ¹³C CP/MAS nuclear magnetic resonance (NMR) spectroscopy. The as-cast SF-F matrix formed a mainly β-sheet structure that was similar to the SF-M matrix, whereas the as-spun SF-N matrix had a random coil conformation as the predominant secondary structure. Conformational transitions from random coil to β-sheet of the as-spun SF-N occurred rapidly within 10 min following aqueous methanol treatment, and were confirmed by solid-state ¹³C NMR analysis. To assess the cytocompatibility and cells behavior on the different textures of SF, we examined the cell attachment and spreading of NHOK that was seeded onto the SF matrices, as well as the interaction between the cells and SF matrices. Our results indicate that the SF nanofiber matrix may be more preferable than SF film and SF microfiber matrices for biomedical applications, such as wound dressings and scaffolds for tissue engineering.     

Hydrothermal production and characterization of protein and amino acids from silk waste

Non-catalytic hydrothermal decomposition of sericin and fibroin from silk waste into useful protein and amino acids was examined in a closed batch reactor at various temperatures, reaction times, and silk to water ratios to examine their effects on protein and amino acid yields. For the decomposition of sericin, the highest protein yield was found to be 0.466 mg protein/mg raw silk, obtained after 10 min hydrothermal reaction of silk waste at 1:100 silk to water ratio at 120 degrees C. The highest amino acid yield was found to be 0.203 mg amino acids/mg raw silk, obtained after 60 min of hydrothermal reaction of silk waste at 1:20 silk to water ratio at 160 degrees C. For the hydrothermal decomposition of fibroin, the highest protein yield was 0.455 mg protein/mg silk fibroin (1:100, 220 degrees C, 10 min) and that of amino acids was 0.755 mg amino acids/mg silk fibroin (1:50, 220 degrees C, 60 min). The rate of silk fibroin decomposition could be described by surface reaction kinetics. The soluble reaction products were freeze-dried to obtain sericin and fibroin particles, whose conformation and crystal structure of the particles were shown to differ from the original silk materials, particularly in the case of fibroin, in which the change from beta-sheet conformation to alpha-helix/random coil was observed.     

Non-bioengineered silk gland fibroin protein: characterization and evaluation of matrices for potential tissue engineering applications

The possibility of using wild non-mulberry silk protein as a biopolymer remains unexplored compared to domesticated mulberry silk protein. One of the main reasons for this was for not having any suitable method of extraction of silk protein fibroin from cocoons and silk glands. In this study non-bioengineered non-mulberry silk gland fibroin protein from tropical tasar silkworm Antheraea mylitta, is regenerated and characterized using 1% (w/v) sodium dodecyl sulfate (SDS). The new technique is important and unique because it uses a mild surfactant for fibroin dissolution and is advantageous over other previous reported techniques using chaotropic salts. Fabricated fibroin films are smooth as confirmed by atomic force microscopy. Circular dichroism spectrometry along with Fourier transformed infrared spectroscopy and X-ray diffraction reveal random coil/alpha-helix conformations in regenerated fibroin which transform to beta-sheets, resulting in crystalline structure and protein insolubility through ethanol treatment. Differential scanning calorimetry shows an increase in glass transition (Tg) temperature and enhanced degradation temperature on alcohol treatment. Enhanced cell attachment and viability of AH927 feline fibroblasts were observed on fibroin matrices. Higher mechanical strength along with controllable water stability of regenerated gland fibroin films make non-mulberry Indian tropical tasar silk gland fibroin protein a promising biomaterial for tissue engineering applications.     

Dynamic light scattering of native silk fibroin solution extracted from different parts of the middle division of the silk gland of the Bombyx mori silkworm

Dynamic light scattering (DLS) measurements were performed on aqueous solutions of native silk fibroin extracted from three parts, the posterior (MP), the middle (MM), and the anterior parts (MA), of the middle division (M) of the silk gland of the Bombyx mori silkworm to study the dynamics and aggregation properties of silk fibroin. In the MP part, fibroin molecules are present as aggregates (or clusters) being composed of several large protein complexes or elementary unit (EU), which are further associated to make a large assembly connected via divalent metallic ions. In the MM part, such clusters of EU take more compact structure, and finally in the MA part, clusters disappear, but EUs are more or less aligned to keep the assembly, and the EU takes the conformation of wormlike cylinder capped with hemispheres at both ends. The overall conformational change in solution structure was interpreted as being due to the change in ionic environment in the solution. DLS study was also performed on regenerated silk fibroin solutions, which revealed that fibroin is present as a single molecule dominantly and their association behavior seems completely different from that of native samples and does not depend on types and concentration of added metallic ions.     

Mixed protein blends composed of gelatin and Bombyx mori silk fibroin: effects of solvent-induced crystallization and composition

Novel protein blends have been prepared by mixing gelatin (G) with Bombyx mori silk fibroin (SF) and using aqueous methanol (MeOH) to post-induce SF crystallization. When co-cast from solution, amorphous blends of these polymers appear homogeneous, as discerned from visual observation, microscopy, and Fourier-transform infrared (FTIR) spectroscopy. Upon subsequent exposure to aqueous MeOH, SF undergoes a conformational change from random coil to beta sheet. This transformation occurs in pure SF, as well as in each of the G/SF blends, according to X-ray diffractometry and thermal calorimetry. The influence of MeOH-induced SF crystallization on structure and property development has been ascertained in terms of preparation history and blend composition. Thermal gravimetric analysis reveals that the presence of beta sheets in SF and G/SF blends improves thermal stability, while extensional rheometry confirms that SF crystallization enhances the tensile properties of the blends. By preserving a support scaffold above the G helix-to-coil transition temperature, the formation of crystalline SF networks in G/SF blends can be used to stabilize G-based hydrogels for biomaterial and pharmaceutical purposes. The present study not only examines the properties of G/SF blends before and after SF crystallization, but also establishes the foundation for future research into thermally responsive G/SF bioconjugates.     

Structural characteristics and properties of the regenerated silk fibroin prepared from formic acid

Structural characteristics and thermal and solution properties of the regenerated silk fibroin (SF) prepared from formic acid (FU) were compared with those of SF from water (AU). According to the turbidity and shear viscosity measurement, SF formic acid solution was stable and transparent, no molecular aggregations occurred. The sample FU exhibited the beta-sheet structure, while AU random coil conformation using Fourier transform infrared (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry. The effects of methanol treatment on samples were also examined. According to the measurement of crystallinity (XRD) and crystallinity index (FTIR), the concept of long/short-range ordered structure formation was proposed. Long-range ordered crystallites are predominantly formed for methanol treated SF film while SF film cast from formic acid favors the formation of short-range ordered structure. The relaxation temperatures of SF films measured by dynamic thermomechanical analysis supported the above mechanism due to the sensitivity of relaxation temperature on the short-range order.     

Characterization by Raman microspectroscopy of the strain-induced conformational transition in fibroin fibers from the silkworm Samia cynthia ricini

Raman microspectroscopy has been used to quantitatively study the effect of a mechanical deformation on the conformation and orientation of Samia cynthia ricini (S. c. ricini) silk fibroin. Samples were obtained from the aqueous solution stored in the silk gland and stretched at draw ratios (lambda) ranging from 0 to 11. Using an appropriate band decomposition procedure, polarized and orientation-insensitive spectra have been analyzed to determine order parameters and the content of secondary structures, respectively. The data unambiguously show that, in response to mechanical deformation, S. c. ricini fibroin undergoes a cooperative alpha-helix to beta-sheet conformational transition above a critical draw ratio of 4. The alpha-helix content decreases from 33 to 13% when lambda increases from 0 to 11, while the amount of beta-sheets increases from 15 to 37%. In comparison, cocoon silk is devoid of alpha-helical structure and always contains a larger amount of beta-sheets. Although the presence of isosbestic points in different spectral regions reveals that the conformational change induced by mechanical deformation is a two-state process, our results suggest that part of the glycine residues might be incorporated into beta-poly(alanine) structures. The beta-sheets are initially isotropically distributed and orient along the fiber axis as lambda increases, but do not reach the high level of orientation found in the cocoon fiber. The increase in the orientation level of the beta-sheets is found to be concomitant with the alpha --> beta conformational conversion, whereas alpha-helices do not orient under the applied strain but are rather readily converted into beta-sheets. The components assigned to turns exhibit a small orientation perpendicular to the fiber axis in stretched samples, showing that, overall, the polypeptide chains are aligned along the stretching direction. Our results suggest that, in nature, factors other than stretching contribute to the optimization of the amount of beta-sheets and the high degree of orientation found in natural cocoon silk.     

Swelling and dissolution of silk fibroin (Bombyx mori) in N-methyl morpholine N-oxide.

Bombyx mori silk fibers were dissolved in N-methyl morpholine N-oxide (MMNO), an organic cyclic amine oxide used for the solvent spinning of regenerated cellulosic fibers. The commercial MMNO monohydrate used in this study as a solvent for silk is a hygroscopic compound crystalline at room temperature, which becomes an active solvent after melting at 76 degrees C. The degree of hydration of MMNO was checked by DSC measurements. The solvation power of MMNO towards silk fibroin drastically decreased at a water content > or = 20-21% w/w. Dissolution of silk required both thermal and mechanical energy. The optimum temperature was 100 degrees C. At lower temperatures dissolution proceeded very slowly. At higher temperatures, rapid depolymerization of silk fibroin occurred. The value of the Flory-Huggins interaction parameter chi for the MMNO-H2O-silk fibroin system was -8.5, suggesting that dissolution is a thermodynamically favored process. The extent of degradation of silk fibroin was assessed by measuring the intrinsic viscosity and determining the amino acid composition of silk after regeneration with an aqueous methanol solution, which was effective in removing the solvent and coagulating silk. Regenerated silk fibroin membranes were characterized by infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. The prevailing molecular conformation of silk fibroin chains was the beta-sheet structure, as shown by the intense amide I-III bands at 1704, 1627, 1515, 1260, and 1230 cm(-1). The value of the I1260/I1230 intensity ratio (crystallinity index) was 0.68, comparable to that of the fibers. The DSC thermogram was characteristic of a silk fibroin material with unoriented beta-sheet crystalline structure, with an intense decomposition endotherm at 294 degrees C. The SEM examination of fractured surfaces showed the presence of a dense microstructure with a very fine texture formed by densely packed roundish particles of about 100-200 nm diameter.     

小鼠胚胎干细胞结合丝素材料向神经细胞分化的实验研究

以小鼠胚胎干细胞（ES）为种子细胞,使用改良的4-/4+ RA方案,诱导小鼠ES细胞在丝素材料上向神经细胞分化,探讨丝素材料对其生长、黏附、分化等情况的影响。将小鼠ES细胞悬浮培养4 d得到的拟胚体（EBs）分别接种到经丝素膜和明胶包被的培养皿上进行诱导,比较不同材料上EBs的贴壁率及向神经元分化的比率。结果表明EBs在明胶和柞蚕丝素蛋白膜（TSF）上贴壁较快,平均贴壁率为90.3%和84.4%,在桑蚕丝素蛋白膜（SF）上贴壁较慢,贴壁率低,仅为38.5%,同时三者神经元的分化比率均能达到40%以上,无明显差异。通过以上实验,我们得出,TSF有望成为小鼠ES细胞向神经细胞分化的支架材料。     

Effect of shearing on formation of silk fibers from regenerated Bombyx mori silk fibroin aqueous solution

In this paper, the spinnable regenerated silk fibroin aqueous solution with high concentration was prepared and the regenerated silk fibers were obtained from the aqueous solution by two different spinning processes at ambient temperature. The orientation of these fibers was characterized by polarizing microscope. Their secondary structure was investigated by Raman spectroscopy and related mechanical properties were also measured. These data showed that shearing is an important step for increasing orientation and silk II (β-sheet) structure, and the mechanical properties of the regenerated silk fibers can also be improved by shearing.     

The preparation and applications of functional fibres from crab shell chitin

Novel chitin–silk fibroin fibres and chitin fibres were prepared by an environmental friendly wet-spinning method. Each aqueous solution of sodium chitin (N-acetylchitosan) salt and its blends of silk fibroin in aqueous 14% sodium hydroxide was spun through a viscose-type spinneret into an aqueous 10% sulfuric acid solution saturated with ammonium sulfate (about 43%), and the corresponding white filament was obtained. The tenacity and elongation values of the chitin–silk fibroin filament decreased with an increase of fibroin content up to 33% by weight. A scanning electron microscopy analysis revealed that both the chitin filament and the chitin–silk fibroin (67:33, w/w) filament had vertical strips with faint scale structures on their surfaces. Some applications of these staple fibres were also reported.     

固定化过氧化物酶丝素膜的制备及其性质

家蚕丝素经高浓度的中性盐氯化钙溶解后,制成了固定化过氧化物酶丝素膜,对这种酶膜的活性和理化特性作了分析,结果表明这种酶膜的活性高,酶促反应温度范围宽,最适pH5.0-7.0,热稳定性也较游离酶好,这与用溴化锂溶解丝素后制成的固定化过氧化物酶膜相仿.因此,用这种方法制成的丝素膜同样是一种良好的固定化酶的生物材料.