Enhanced production of raw starch degrading enzyme using agro-industrial waste mixtures by thermotolerant Rhizopus microsporus for raw cassava chip saccharification in ethanol production

In the present study, solid-state fermentation for the production of raw starch degrading enzyme was investigated by thermotolerant Rhizopus microsporus TISTR 3531 using a combination of agro-industrial wastes as substrates. The obtained crude enzyme was applied for hydrolysis of raw cassava starch and chips at low temperature and subjected to nonsterile ethanol production using raw cassava chips. The agro-industrial waste ratio was optimized using a simplex axial mixture design. The results showed that the substrate mixture consisting of rice bran:corncob:cassava bagasse at 8?g:10?g:2?g yielded the highest enzyme production of 201.6?U/g dry solid. The optimized condition for solid-state fermentation was found as 65% initial moisture content, 35°C, initial pH of 6.0, and 5?×?10⁶ spores/mL inoculum, which gave the highest enzyme activity of 389.5?U/g dry solid. The enzyme showed high efficiency on saccharification of raw cassava starch and chips with synergistic activities of commercial α-amylase at 50°C, which promotes low-temperature bioethanol production. A high ethanol concentration of 102.2?g/L with 78% fermentation efficiency was achieved from modified simultaneous saccharification and fermentation using cofermentation of the enzymatic hydrolysate of 300?g raw cassava chips/L with cane molasses.     

Optimization of pretreatment and saccharification for the production of bioethanol from water hyacinth by Saccharomyces cerevisiae

Alkaline-oxidative (A/O) pretreatment and enzymatic saccharification were optimized for bioethanol fermentation from water hyacinth by Saccharomyces cerevisiae. Water hyacinth was subjected to A/O pretreatment at various NaOH and H(2)O(2) concentrations and reaction temperatures for the optimization of bioethanol fermentation by S. cerevisiae. The most effective condition for A/O pretreatment was 7% (w/v) NaOH at 100 °C and 2% (w/v) H(2)O(2). The carbohydrate content was analyzed after reaction at various enzyme concentrations and enzyme ratios using Celluclast 1.5 L and Viscozyme L to determine the effective conditions for enzymatic saccharification. After ethanol fermentation using S. cerevisiae KCTC 7928, the concentration of glucose, ethanol and glycerol was analyzed by HPLC using a RI detector. The yield of ethanol in batch fermentation was 0.35 g ethanol/g biomass. Continuous fermentation was carried out at a dilution rate of 0.11 (per h) and the ethanol productivity was 0.77 [g/(l h)].     

Process design and optimization of bioethanol production from cassava bagasse using statistical design and genetic algorithm

Abstract

Bioethanol production from agro-industrial residues is gaining attention because of the limited production of starch grains and sugarcane, and food–fuel conflict. The aim of the present study is to maximize the bioethanol production using cassava bagasse as a feedstock. Enzymatic liquefaction, by α-amylase, followed by simultaneous saccharification and fermentation (SSF), using glucoamylase and Zymomonas mobilis MTCC 2427, was investigated for bioethanol production from cassava bagasse. The factors influencing ethanol production process were identified and screened for significant factors using Plackett–Burman design. The significant factors (cassava bagasse concentration (10–50?g/L), concentration of α-amylase (5–25% (v/v), and temperature of fermentation (27–37?°C)) were optimized by employing Box–Behnken design and genetic algorithm. The maximum ethanol concentrations of 25.594?g/L and 25.910?g/L were obtained from Box–Behnken design and genetic algorithm, respectively, under optimum conditions. Thus, the study provides valuable insights in utilizing the cost-effective industrial residue, cassava bagasse, for the bioethanol production.     

Dilute acid pretreatment and enzymatic saccharification of sugarcane tops for bioethanol production

The aim of this work was to study the feasibility of using sugarcane tops as feedstock for the production of bioethanol. The process involved the pretreatment using acid followed by enzymatic saccharification using cellulases and the process was optimized for various parameters such as biomass loading, enzyme loading, surfactant concentration and incubation time using Box–Behnken design. Under optimum hydrolysis conditions, 0.685 g/g of reducing sugar was produced per gram of pretreated biomass. The fermentation of the hydrolyzate using Saccharomyces cerevisae produced 11.365 g/L of bioethanol with an efficiency of about 50%. This is the first report on utilization of sugarcane tops for bioethanol production.     

Simultaneous saccharification and continuous fermentation of sludge-containing mash for bioethanol production by Saccharomyces cerevisiae CHFY0321

A continuous process was employed to improve the volumetric productivity of bioethanol production from cassava mash containing sludge and to simplify the process of ethanol production from cassava. After raw cassava powder was liquefied, it was used directly in a continuous process without sludge filtration or saccharification. A fermentor consisting of four linked stirrer tanks was used for simultaneous saccharification and continuous fermentation (SSCF). Although the mash contained sludge, continuous fermentation was successfully achieved. We chose the dilution rate on the basis of the maximum saccharification time; the highest volumetric productivity and ethanol yield were observed at a dilution rate of 0.028 h?1. The volumetric productivity, final ethanol concentration, and % of theoretical ethanol yield were 2.41 g/Lh, 86.1g/L, and 91%, respectively. This SSCF process using the self-flocculating yeast Saccharomyces cerevisiae CHFY0321 illustrates the possibility of realizing cost-effective bioethanol production by eliminating additional saccharification and filtration processes. In addition, flocculent CHFY0321, which our group developed, showed excellent fermentation results under continuous ethanol production.     

Optimization of fermentation parameters for production of ethanol from kinnow waste and banana peels by simultaneous saccharification and fermentation

A study was taken up to evaluate the role of some fermentation parameters like inoculum concentration, temperature, incubation period and agitation time on ethanol production from kinnow waste and banana peels by simultaneous saccharification and fermentation using cellulase and co-culture of Saccharomyces cerevisiae G and Pachysolen tannophilus MTCC 1077. Steam pretreated kinnow waste and banana peels were used as substrate for ethanol production in the ratio 4:6 (kinnow waste: banana peels). Temperature of 30°C, inoculum size of S. cerevisiae G 6% and (v/v) Pachysolen tannophilus MTCC 1077 4% (v/v), incubation period of 48 h and agitation for the first 24 h were found to be best for ethanol production using the combination of two wastes. The pretreated steam exploded biomass after enzymatic saccharification containing 63 gL⁻¹ reducing sugars was fermented with both hexose and pentose fermenting yeast strains under optimized conditions resulting in ethanol production, yield and fermentation efficiency of 26.84 gL⁻¹, 0.426 gg ⁻¹ and 83.52 % respectively. This study could establish the effective utilization of kinnow waste and banana peels for bioethanol production using optimized fermentation parameters.     

Simultaneous saccharification and ethanol fermentation of oxalic acid pretreated corncob assessed with response surface methodology

Response surface methodology was used to evaluate optimal time, temperature and oxalic acid concentration for simultaneous saccharification and fermentation (SSF) of corncob particles by Pichia stipitis CBS 6054. Fifteen different conditions for pretreatment were examined in a 2³ full factorial design with six axial points. Temperatures ranged from 132 to 180 °C, time from 10 to 90 min and oxalic acid loadings from 0.01 to 0.038 g/g solids. Separate maxima were found for enzymatic saccharification and hemicellulose fermentation, respectively, with the condition for maximum saccharification being significantly more severe. Ethanol production was affected by reaction temperature more than by oxalic acid and reaction time over the ranges examined. The effect of reaction temperature was significant at a 95% confidence level in its effect on ethanol production. Oxalic acid and reaction time were statistically significant at the 90% level. The highest ethanol concentration (20 g/l) was obtained after 48 h with an ethanol volumetric production rate of 0.42 g ethanol l⁻¹ h⁻¹. The ethanol yield after SSF with P. stipitis was significantly higher than predicted by sequential saccharification and fermentation of substrate pretreated under the same condition. This was attributed to the secretion of β-glucosidase by P. stipitis. During SSF, free extracellular β-glucosidase activity was 1.30 pNPG U/g with P. stipitis, while saccharification without the yeast was 0.66 pNPG U/g.     

白腐真菌Pleurotus sajor-caju预处理对红麻秸秆发酵乙醇的影响

为研究微生物法预处理对红麻秸秆中木质素的降解及后续的红麻纤维素酶促糖化和发酵效率的影响,将白腐真菌Pleurotus sajor-caju接种在红麻秸秆培养基上固态培养,对红麻秸秆进行预处理。经P. sajor-caju培养25~35 d后,有效转化红麻秸秆中的木质素,转化率最高可达50.20％,并提高红麻纤维素的酶促水解效率,糖化率达69.33％~78.64％,与对照组相比提高了3.5~4.1倍。以微生物法预处理后的红麻秸秆样品为底物的同步糖化发酵实验表明,发酵72 h,发酵液中乙醇浓度达到18.35~     

Improved bioethanol production through simultaneous saccharification and fermentation of lignocellulosic agricultural wastes by <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> 6556

The combined effect of simultaneous saccharification and fermentation and separate hydrolysis and fermentation (SHF) for ethanol production by Kluyveromyces marxianus 6556 was studied using two lignocellulosic feedstocks viz., corncob and soybean cake. The ethanologenic efficiency of K. marxianus 6556 was observed as 28% (theoretical yield) in a fermentation medium containing glucose, but, there was no ethanol production by cells grown on xylose. A maximum sugar release of 888 mg/g corncob and 552 mg/g soybean cake was achieved through acid hydrolysis pretreatment. Furthermore, corncob and soybean cake treated with commercial cellulase (100 IU for 48 h) from Trichoderma reesei yielded reducing sugars of 205 and 100 mg/g, respectively. Simultaneous saccharification and fermentation resulted in highest ethanol production of 5.68 g/l on corncob and 2.14 g/l on soybean cake after 48 h of incubation. On the contrary, the presence of inhibitors decreased the overall ethanol yield in the hydrolysates obtained through SHF of corncob and soybean cake.     

One-pot bioethanol production from cellulose by co-culture of Acremonium cellulolyticus and Saccharomyces cerevisiae

ABSTRACT: BACKGROUND: While the ethanol production from biomass by consolidated bioprocess (CBP) is considered to be the most ideal process, simultaneous saccharification and fermentation (SSF) is the most appropriate strategy in practice. In this study, one-pot bioethanol production, including cellulase production, saccharification of cellulose, and ethanol production, was investigated for the conversion of biomass to biofuel by co-culture of two different microorganisms such as a hyper cellulase producer, Acremonium cellulolyticus C-1 and an ethanol producer Saccharomyces cerevisiae. Furthermore, the operational conditions of the one-pot process were evaluated for maximizing ethanol concentration from cellulose in a single reactor. RESULTS: Ethanol production from cellulose was carried out in one-pot bioethanol production process. A. cellulolyticus C-1 and S. cerevisiae were co-cultured in a single reactor. Cellulase producing-medium supplemented with 2.5 g/l of yeast extract was used for productions of both cellulase and ethanol. Cellulase production was achieved by A. cellulolyticus C-1 using Solka-Floc (SF) as a cellulase-inducing substrate. Subsequently, ethanol was produced with addition of both 10%(v/v) of S. cerevisiae inoculum and SF at the culture time of 60 h. Dissolved oxygen levels were adjusted at higher than 20% during cellulase producing phase and at lower than 10% during ethanol producing phase. Cellulase activity remained 8--12 FPU/ml throughout the one-pot process. When 50--300 g SF/l was used in 500 ml Erlenmeyer flask scale, the ethanol concentration and yield based on initial SF were as 8.7--46.3 g/l and 0.15--0.18 (g ethanol/g SF), respectively. In 3-l fermentor with 50--300 g SF/l, the ethanol concentration and yield were 9.5--35.1 g/l with their yields of 0.12--0.19 (g/g) respectively, demonstrating that the one-pot bioethanol production is a reproducible process in a scale-up bioconversion of cellulose to ethanol. CONCLUSION: A. cellulolyticus cells produce cellulase using SF. Subsequently, the produced cellulase saccharifies the SF, and then liberated reducing sugars are converted to ethanol by S. cerevisiae. These reactions were carried out in the one-pot process with two different microorganisms in a single reactor, which does require neither an addition of extraneous cellulase nor any pretreatment of cellulose. Collectively, the one-pot bioethanol production process with two different microorganisms could be an alternative strategy for a practical bioethanol production using biomass.     

Study of a single and mixed culture for the direct bio-conversion of sorghum carbohydrates to ethanol

Fusaium oxysporum F3 alone or in mixed culture with Saccharomyces cerevisiae 2541 fermented soluble and insoluble carbohydrates of sweet sorghum stalk directly to ethanol. Both microorganisms were first grown aerobically and fermented sorghum stalk to ethanol thereafter. During fermentation, insoluble carbohydrates were hydrolysed to soluble sugars by the celluloytic system of F. oxysporum. Ethanol yields as high as 24.4 and 33.5 g/100 g dry stalks were obtained by F. oxysporum and the mixed culture respectively, representing a theoretical yield enhancement of 11.6% and 53.6% respectively. The corresponding ethanol concentrations in the fermentation medium were 4.6% and 6.4% (w/v). These results clearly demonstrated that a large portion of insoluble carbohydrate from sorghum was converted by simultaneous saccharification and fermentation to ethanol, making the process promising for bioethanol production.     

Utilization of horticultural waste (Apple Pomace) for multiple carbohydrase production from Rhizopus delemar F2 under solid state fermentation

The brown rot fungus Rhizopus delemar F₂ was shown to produce extracellular thermostable and multiple carbohydrase enzymes. The potential of Rhizopus delemar F2 in utilizing apple pomace under solid state fermentation (SSF) is the purpose of the study. Solid state fermentation (SSF) is a very effective technique opposed to submerged fermentation in various aspects. Enhanced production of multiple carbohydrases 18.20?U?g^?1 of cellulose, 158.30?U?g^?1 of xylanase, 61.50?U?g^?1 of pectinase and amylase 21.03?U?g^?1 was released by microwave pretreatment of apple pomace at 450?W for 1?min and then by incubation the culture thus obtained at 30?°C for 6 days with moisture content of 1:4.5. Apple pomace can serve as a potential source of raw material for the production of multiple carbohydrases. Besides, it can find great commercial significance in production of bioethanol and various industries like textile, fruit juice, paper and pulp industry.     

Liquid state fermentation of apple pomace sludge for the production of ligninolytic enzymes and liberation of polyphenolic compounds

Ligninolytic enzyme production and polyphenolic compound extraction by liquid-state culture of Phanerochaete chrysosporium ATCC 24275 was investigated by employing apple pomace sludge and synthetic medium. Different physico-chemical and biological parameters namely viscosity, zeta potential and particle size, viability and enzyme production were investigated. The ligninolytic enzyme production was higher in apple pomace sludge (45 U/l of laccase, 220 U/l of MnP and 6.5 U/l of LiP) than in synthetic medium (17 U/l of laccase, 37 U/l of MnP and 6 U/l). These maximal activities were found during the stationary and decline phase. It was also found that enzyme production was strongly correlated with P. chrysoporium viability in both synthetic medium and apple pomace sludge. Moreover, physico-chemical parameters, such as particle size, zeta potential and viscosity were strongly correlated to the viability of P. chrysosporium and to the ligninolytic enzyme production. An increase in polyphenol content extracted by acetone (383–720 mg GAE/l) was observed during fermentation of apple pomace and it was found that the polyphenol content extracted by ethanol increased ～1.5 fold until 67 h of fermentation and later it decreased. It was found that antioxidant activity increased to 35% and eventually decreased based on the change in the polyphenol content.     

Plant cell walls to ethanol

Conversion of plant cell walls to ethanol constitutes second generation bioethanol production. The process consists of several steps: biomass selection/genetic modification, physiochemical pretreatment, enzymatic saccharification, fermentation and separation. Ultimately, it is desirable to combine as many of the biochemical steps as possible in a single organism to achieve CBP (consolidated bioprocessing). A commercially ready CBP organism is currently unreported. Production of second generation bioethanol is hindered by economics, particularly in the cost of pretreatment (including waste management and solvent recovery), the cost of saccharification enzymes (particularly exocellulases and endocellulases displaying kcat ~1?s-1 on crystalline cellulose), and the inefficiency of co-fermentation of 5- and 6-carbon monosaccharides (owing in part to redox cofactor imbalances in Saccharomyces cerevisiae).     

Bacterial cellulose synthesized with apple pomace enhanced by ionic liquid pretreatment

Abstract

Apple pomace was explored as alternative feedstock for producing bacterial cellulose (BC) by Gluconacetobacter xylinus following a cellulase saccharification performed after pretreatment of 1-allyl-3-methylimidazolium chloride ([AMIM]Cl). The dissolving process of apple pomace cellulose was observed by polarized light microscopy (PLM). As FT-IR and XRD results demonstrated, the IL pretreatment proved to be a physical process and no changes in the crystalline structure occurred during the pretreatment. However, the SEM result showed that more fissures and breakages appeared on the surface of pomace microfibers after IL-pretreating, which increased the contact area with cellulase and improved the enzymatic hydrolysis efficiency. An enhancing effect on the BC yield has been observed, 27% higher yield of BC obtained from hydrolysate as compared to sucrose-based medium indicates efficiency of IL-treated apple pomace to serve as high quality feedstock in BC production.     

EFFICIENT PRODUCTION OF BIOETHANOL FROM CORN STOVER BY PRETREATMENT WITH A COMBINATION OF SULFURIC ACID AND SODIUM HYDROXIDE

Corn stover is the most abundant agricultural residue in China and a valuable reservoir for bioethanol production. In this study, we proposed a process for producing bioethanol from corn stover; the pretreatment prior to presaccharification, followed by simultaneous saccharification and fermentation (SSF) by using a flocculating Saccharomyces cerevisiae strain, was optimized. Pretreatment with acid–alkali combination (1% H₂SO₄, 150°C, 10 min, followed by 1% NaOH, 80°C, 60 min) resulted in efficient lignin removal and excellent recovery of xylose and glucose. A glucose recovery efficiency of 92.3% was obtained by enzymatic saccharification, when the pretreated solid load was 15%. SSF was carried out at 35°C for 36 hr after presaccharification at 50°C for 24 hr, and an ethanol yield of 88.2% was achieved at a solid load of 15% and an enzyme dosage of 15 FPU/g pretreated corn stover.     

Bioethanol production from tension and opposite wood of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> using organosolv pretreatment and simultaneous saccharification and fermentation

During tree growth, hardwoods can initiate the formation of tension wood, which is a strongly stressed wood on the upper side of the stem and branches. In Eucalyptus globulus, tension wood presents wider and thicker cell walls with low lignin, similar glucan and high xylan content, as compared to opposite wood. In this work, tension and opposite wood of E. globulus trees were separated and evaluated for the production of bioethanol using ethanol/water delignification as pretreatment followed by simultaneous saccharification and fermentation (SSF). Low residual lignin and high glucan retention was obtained in organosolv pulps of tension wood as compared to pulps from opposite wood at the same H-factor of reaction. The faster delignification was associated with the low lignin content in tension wood, which was 15% lower than in opposite wood. Organosolv pulps obtained at low and high H-factor (3,900 and 12,500, respectively) were saccharified by cellulases resulting in glucan-to-glucose yields up to 69 and 77%, respectively. SSF of the pulps resulted in bioethanol yields up to 35 g/l that corresponded to 85–95% of the maximum theoretical yield on wood basis, considering 51% the yield of glucose to ethanol conversion in fermentation, which could be considered a very satisfactory result compared to previous studies on the conversion of organosolv pulps from hardwoods to bioethanol. Both tension and opposite wood of E. globulus were suitable raw materials for organosolv pretreatment and bioethanol production with high conversion yields.     

Chemical characteristics and ethanol fermentation of the cellulose component in autohydrolyzed bagasse

The chemical characteristics, enzymatic saccharification, and ethanol fermentation of autohydrolyzed lignocellulosic material that was exposed to steam explosion were investigated using bagasse as the sample. The effects of the steam explosion on the change in pH, organic acids production, degrees of polymerization and crystallinity of the cellulose component, and the amount of extractive components in the autohydrolyzated bagasse were examined. The steam explosion decreased the degree of polymerzation up to about 700 but increased the degree of crystallinity and the micelle width of the cellulose component in the bagasse. The steam explosion, at a pressure of 2.55 MPa for 3 mins, was the most effective for the delignification of bagasse. 40 g/L of glucose and 20 g/L of xylose were produced from 100 g/L of the autohydrolyzed bagasse by the enzymatic saccharification using mixed cellulases, acucelase and meicelase. The maximum ethanol concentration, 20 g/L, was obtained from the enzymatic hydrolyzate of 100 g/L of the autohydrolyzed bagasse by the ethanol fermentation usingPichia stipitis CBS 5773; the ethanol yield from sugars was 0.33 g/g sugars.     

Protein enrichment of apple pomace by co-culture of cellulolytic moulds and yeasts

The co-culture of cellulolytic moulds and yeasts on apple pomace in solid-state fermentation (SSF) and liquid-state fermentation (LSF) increased the protein content of apple pomace. The co-culture of Candida utilis and Aspergillus niger was the best among several combinations and increased the protein content of dried and pectin-extracted apple pomace to 20% and 17%, respectively, under SSF conditions.The authors are with the Microbiology Research Laboratory, Department of Biosciences, Himachal Pradesh University, Shimia-171005, India.     

Biotechnological production of ethanol: Biochemistry,processes and technologies

The majority of environmental problems arise from the use of conventional energy sources. The liability of such problems along with the reduction of fossil energy resources has led to the global need for alternative renewable energy sources. Using renewable biofuels as energy sources is of remarkable and continuously growing importance. Producing bioethanol through conversion of waste and residual biomass can be a viable and important perspective. In the first part of this review, general concepts, approaches and considerations concerning the utilization of the most important liquid biofuels, namely biodiesel and bioethanol, are presented. Unlike biodiesel (specifically first generation biodiesel), the production of bioethanol is exclusively based on the utilization of microbial technology and fermentation engineering. In the second part of this review, the biochemistry of ethanol production, with regards to the use of hexoses, pentoses or glycerol as carbon sources, is presented and critically discussed. Differences in the glycolytic pathways between the major ethanol‐producing strains (Saccharomyces cerevisiae and Zymomonas mobilis) are presented. Regulation between respiration and fermentation in ethanol‐producing yeasts, viz. effects “Pasteur”, “Crabtree”, “Kluyver” and “Custers”, is discussed. Xylose and glycerol catabolism related with bioethanol production is also depicted and commented. The technology of the fermentation is presented along with a detailed illustration of the substrates used in the process and in pretreatment of lignocellulosic biomass, and the various fermentation configurations employed (separate hydrolysis and fermentation, simultaneous saccharification and fermentation, simultaneous saccharification and co‐fermentation and consolidated bioprocessing). Finally, the production of bioethanol under non‐aseptic conditions is presented and discussed.