Cross-linked enzyme aggregates (CLEAs) with controlled particles: Application to Candida rugosa lipase

Aggregation agent type and concentration, lipase and glutaraldehyde concentration, and pH are able to affect the formation of cross-linked lipase. The carrier-free immobilized Candida rugosa lipase with a particle size of 40–50 μm showed higher activity than that of the lipase with other particle sizes. The carrier-free immobilized C. rugosa lipase can keep 86% original lipase activity (0.018 g g⁻¹ min⁻¹). The enantioselectivity of the carrier-free immobilized lipase (23.3) was about 1.8 times as much as that of the native lipase (13.0) in kinetic resolution of ibuprofen racemic mixture.     

Biosorption of nonylphenol on dead biomass of Rhizopus arrhizus encapsulated in chitosan beads

The nonylphenol (NP) biosorption and desorption potential for fungal biomass used under batch conditions was investigated using kinetics and isotherm models. Fungal biomass of Rhizopus arrhizus TISTR 3610 exhibited preferential uptake of NP, an endocrine disrupting chemicals. Sporangiospores, asexual spores, were immobilised in chitosan beads. The biosorption data of NP on the moist heat inactivated R. arrhizus–chitosan beads were analyzed using four popular adsorption isotherms and, by using non-linear least-regression with the solver add-in in Microsoft Excel, correlated in order with the Fritz–Schluender > Redlich–Peterson > Freundlich > Langmuir isotherms. The pseudo first-order kinetics was found to have the best fit with the experimental data. The diffusivity of NP in the R. arrhizus–chitosan beads was calculated using the shrinking core model, and the diffusivity values were in the ranges of 2.3736 × 10⁻⁴–1.8950 × 10⁻⁴ cm² s⁻¹. Desorption to recover the adsorbed NP from the beads was performed in methanol and was best described using a pseudo second-order kinetic model.     

Effects of oils and oil-related substrates on the synthetic activity of membrane-bound lipase from Rhizopus chinensis and optimization of the lipase fermentation media

The lipase from filamentous fungi Rhizopus chinensis, as a membrane-bound enzyme, possesses the excellent catalysis ability for esterification and transesterification reactions, and has a good potential in many industrial applications. In order to improve the synthetic activity of the lipase, the effects of oils and oil-related substrates on its production and the fermentation media optimization were investigated. Based on the results, it was suggested that oleic acid could be the important substrate for the lipase production. Among various oils and oil-related substrates, olive oil containing high content of oleic acid was the optimal one for the lipase production. Using orthogonal test and response surface methodology (RSM), the composition of fermentation media was further optimized. The optimized media for lipase synthetic activity and activity yield was composed of peptone 57.94 and 55.58 g L⁻¹, olive oil 21.94 and 22.99 g L⁻¹, maltose 12.91 and 14.34 g L⁻¹, respectively, with K₂HPO₄ 3 g L⁻¹, MgSO₄·7H₂O 5 g L⁻¹ and initial pH 6.0. Under the optimal conditions, the lipase activity and the activity yield were improved 61.5 and 93.4% comparing the results before optimization, respectively. The adequate models obtained had predicted the lipase production successfully.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Nitrogen utilization by the raphidophyte Heterosigma akashiwo: Growth and uptake kinetics in laboratory cultures

The nitrogen uptake and growth capabilities of the potentially harmful, raphidophycean flagellate Heterosigma akashiwo (Hada) Sournia were examined in unialgal batch cultures (strain CCMP 1912). Growth rates as a function of three nitrogen substrates (ammonium, nitrate and urea) were determined at saturating and sub-saturating photosynthetic photon flux densities (PPFDs). At saturating PPFD (110 μE m⁻² s⁻¹), the growth rate of H. akashiwo was slightly greater for cells grown on NH₄⁺ (0.89 d⁻¹) compared to cells grown on NO₃⁻ or urea, which had identical growth rates (0.82 d⁻¹). At sub-saturating PPFD (40 μE m⁻² s⁻¹), both urea- and NH₄⁺-grown cells grew faster than NO₃⁻-grown cells (0.61, 0.57 and 0.46 d⁻¹, respectively). The N uptake kinetic parameters were investigated using exponentially growing batch cultures of H. akashiwo and the ¹⁵N-tracer technique. Maximum specific uptake rates (V_max) for unialgal cultures grown at 15 °C and saturating PPFD (110 μE m⁻² s⁻¹) were 28.0, 18.0 and 2.89 × 10⁻³ h⁻¹ for NH₄⁺, NO₃⁻ and urea, respectively. The traditional measure of nutrient affinity—the half saturation constants (K_s) were similar for NH₄⁺ and NO₃⁻ (1.44 and 1.47 μg-at N L⁻¹), but substantially lower for urea (0.42 μg-at N L⁻¹). Whereas the α parameter (α = V_max/K_s), which is considered a more robust indicator for substrate affinity when substrate concentrations are low (<K_s), were 19.4, 12.2 and 6.88 × 10⁻³ h⁻¹/(μg-at N L⁻¹) for NH₄⁺, NO₃⁻ and urea, respectively. These laboratory results demonstrate that at both saturating and sub-saturating N concentrations, N uptake preference follows the order: NH₄⁺ > NO₃⁻ > urea, and suggests that natural blooms of H. akashiwo may be initiated or maintained by any of the three nitrogen substrates examined.     

Effects of carbon concentration and carbon to nitrogen ratio on the growth and sporulation of several biocontrol fungi

Effects of carbon concentration and carbon to nitrogen (C:N) ratio on six biocontrol fungal strains are reported in this paper. All fungal strains had extensive growth on the media supplemented with 6–12 g l⁻¹ carbon and C:N ratios from 10:1 to 80:1, and differed in nutrient requirements for sporulation. Except for the two strains of Paecilomyces lilacinus, all selected fungi attained the highest spore yields at a C:N ratio of 160:1 when the carbon concentration was 12 g l⁻¹ for Metarhizium anisopliae SQZ-1-21, 6 g l⁻¹ for M. anisopliae RS-4-1 and Trichoderma viride TV-1, and 8 g l⁻¹ for Lecanicillium lecanii CA-1-G. The optimal conditions for P. lilacinus sporulation were 8 g l⁻¹ carbon with a C:N ratio of 10:1 for M-14 and 12 g l⁻¹ carbon with a C:N ratio of 20:1 for IPC-P, respectively. The results indicated that the influence of carbon concentration and C:N ratio on fungal growth and sporulation is strain dependent; therefore, consideration for the complexity of nutrient requirements is essential for improving yields of fungal biocontrol agents.     

Inhibition of hepatic lipase by m-aminophenylboronate application of phenylboronate affinity chromatography for purification of human postheparin plasma lipases

Phenylboronates are competitive inhibitors of serine hydrolases including lipases. We studied the effect of m-aminophenylboronate on triglyceride-hydrolyzing activity of hepatic lipase (EC 3.1.1.3). m-Aminophenylbo ronate inhibited hepatic lipase activity with a K₁ value of 55 μM. Furthermore, m-aminophenylboronate protected hepatic lipase activity from inhibition by di-isopropyl fluorophosphate, an irreversible active site inhibitor of serine hydrolases. Inhibition of hepatic lipase activity by m-aminophenylboronate was pH-dependent. The inhibition was maximal at pH 7.5, while at pH 10 it was almost non-existent. These data were used to develop a purification procedure for postheparin plasma hepatic lipase and lipoprotein lipase. The method is a combination of m-aminophenylboronate and heparin-Sepharose affinity chromatographies. Hepatic lipase was purified to homogeneity as analyzed on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The specific activity of purified hepatic lipase was 5.46 mmol free fatty acids h⁻¹ mg⁻¹ protein with a total purification factor of 14 400 and a final recovery of approximately 20%. The recovery of hepatic lipase activity in m-aminophenylboronate affinity chromatography step was 95%. The purified lipoprotein lipase was a homogeneous protein with a specific activity of 8.27 mmol free fatty acids h⁻¹ mg⁻¹ The purification factor was 23 400 and the final recovery approximately 20%. The recovery of lipoprotein lipase activity in the m-aminophenylboronate affinity chromatography step was 87%. The phenylboronate affinity chromatography step can be used for purification of serine hydrolases which interact with boronates.     

Growth of dinoflagellates, Ceratium furca and Ceratium fusus in Sagami Bay, Japan: The role of temperature, light intensity and photoperiod

Seasonal changes of field populations and growth rates of two dinoflagellates, Ceratium furca and Ceratium fusus, were examined in the temperate coastal water of Sagami Bay, Japan. Weekly field sampling was conducted from August 2002 to August 2003, and laboratory experiments were also carried out to investigate effects of temperature, irradiance and photoperiod on the growth rates of these two Ceratium species. In the field, the abundances of both species increased significantly from April to August 2003, were gradually decreased from November 2002 and were not observed in January 2003. C. fusus was able to increase at lower temperatures in February 2003 compared to C. furca. In the laboratory, the two species did not grow at <10 °C or >32 °C. The highest specific growth rate of C. furca was 0.72 d⁻¹ at 24 °C and 600 μmol m⁻² s⁻¹. Optimum growth rates (>0.4 d⁻¹) of C. furca were observed at temperatures from 18 to 28 °C and at irradiances from 216 to 796 μmol m⁻² s⁻¹. The highest growth rate of C. fusus was 0.56 d⁻¹ at 26 °C and 216 μmol m⁻² s⁻¹. Optimum growth rates of C. fusus were observed at the same irradiance rage of C. furca, whereas optimum temperature range was narrower (26–28 °C). The growth curves of both species indicated saturation of the growth rates when light intensity was above 216 μmol m⁻² s⁻¹, and did not show photoinhibition at irradiances up to 796 μmol m⁻² s⁻¹. The specific growth rates of both Ceratium species were clearly decreased at L:D = 10:14 relative to those at L:D = 14:10 and L:D = 12:12. The present study indicates the two Ceratium species can adapt to a wide range of temperature and irradiance.     

The effect of seasonality on oxidative metabolism in Nacella (Patinigera) magellanica

We studied the seasonal variation on aerobic metabolism and the response of oxidative stress parameters in the digestive glands of the subpolar limpet Nacella (P.) magellanica. Sampling was carried out from July (winter) 2002 to July 2003 in Beagle Channel, Tierra del Fuego, Argentina. Whole animal respiration rates increased in early spring as the animals spawned and remained elevated throughout summer and fall (winter: 0.09 ± 0.02 μmol O₂ h^− 1 g^− 1; summer: 0.31 ± 0.06 μmol O₂ h^− 1 g^− 1). Oxidative stress was assessed at the hydrophilic level as the ascorbyl radical content / ascorbate content ratio (A / AH⁻). The A / AH⁻ ratio showed minimum values in winter (3.7 ± 0.2 10^− 5 AU) and increased in summer (18 ± 5 10^− 5 AU). A similar pattern was observed for lipid radical content (122 ± 29 pmol mg^− 1 fresh mass [FW] in winter and 314 ± 45 pmol mg^− 1 FW in summer), iron content (0.99 ± 0.07 and 2.7 ± 0.6 nmol mg^− 1 FW in winter and summer, respectively) and catalase activity (2.9 ± 0.2 and 7 ± 1 U mg^− 1 FW in winter and summer, respectively). Since nitrogen derived radicals are thought to be critically involved in oxidative metabolism in cells, nitric oxide content was measured and a significant difference in the content of the Fe–MGD–NO adduct in digestive glands from winter and summer animals was observed. Together, the data indicate that both oxygen and nitrogen radical generation rates in N. (P.) magellanica are strongly dependent on season.     

Effects of different growth forms of Mucor indicus on cultivation on dilute-acid lignocellulosic hydrolyzate, inhibitor tolerance, and cell wall composition

The dimorphic fungus Mucor indicus was grown in different forms classified as purely filamentous, mostly filamentous, mostly yeast-like and purely yeast-like, and the relationship between morphology and metabolite production, inhibitor tolerance and the cell wall composition was investigated. Low concentrations of spores in the inoculum with subsequent aeration promoted filamentous growth, whereas higher spore concentrations and anaerobic conditions promoted yeast-like growth. Ethanol was the main metabolite with glycerol next under all conditions tested. The yields of ethanol from glucose were between 0.39 and 0.42 g g⁻¹ with productivities of 3.2–5.0 g l⁻¹ h⁻¹. The ethanol productivity of mostly filamentous cells was increased from 3.9 to 5.0 g l⁻¹ h⁻¹ by the presence of oxygen, whereas aeration of purely yeast-like cells showed no such effect. All growth forms were able to tolerate 4.6 g l⁻¹ furfural and 10 g l⁻¹ acetic acid and assimilate the sugars, although with different consumption rates. The cell wall content of the fungus measured as alkali insoluble materials (AIM) of the purely yeast-like cells was 26% of the biomass, compared to 8% of the pure filaments. However, the chitosan concentration of the filaments was 29% of the AIM, compared to 6% of the yeast-like cells.     

Effect of additives on the esterification activity of immobilized Candida antarctica lipase

In this work, the stabilizing effect of bovine serum albumin (BSA), peptone (PEP), and polyethylene glycol (PEG) during immobilization of Candida antarctica lipase on activated carbon was investigated. The influence of enzyme concentration and type of additive, added during the immobilization procedure, was studied using a 2² factorial central composite design. The goal was to maximize the synthetic activity of butyl butyrate, using butyric acid and butanol as substrate in n-heptane. An increase of 31–58% in the esterification activity was obtained when enzyme concentration on the supernatant was enhanced from 86.50 U m L⁻¹ to 226.80 U mL⁻¹. An enhancement in esterification activity of 38–68.95% was observed, depending on the initial enzyme concentration, when PEP was used instead of BSA. No significant increase in the esterification activity was observed when PEP was replaced by PEG. However, thermal stability tests at 50 °C showed that PEG had a higher stabilizing effect.     

Cyanobacteria and cyanobacterial toxins in the alkaline crater lakes Sonachi and Simbi, Kenya

The phytoplankton communities and the production of cyanobacterial toxins were investigated in two alkaline Kenyan crater lakes, Lake Sonachi and Lake Simbi. Lake Sonachi was mainly dominated by the cyanobacterium Arthrospira fusiformis, Lake Simbi by A. fusiformis and Anabaenopsis abijatae. The phytoplankton biomasses measured were high, reaching up to 3159 mg l⁻¹ in L. Sonachi and up to 348 mg l⁻¹ in L. Simbi. Using HPLC techniques, one structural variant of the hepatotoxin microcystin (microcystin-RR) was found in L. Sonachi and four variants (microcystin-LR, -RR, -LA and -YR) were identified in L. Simbi. The neurotoxin anatoxin-a was found in both lakes. To our knowledge this is the first evidence of cyanobacterial toxins in L. Sonachi and L. Simbi. Total microcystin concentrations varied from 1.6 to 12.0 μg microcystin-LR equivalents g⁻¹ DW in L. Sonachi and from 19.7 to 39.0 μg microcystin-LR equivalents g⁻¹ DW in L. Simbi. Anatoxin-a concentrations ranged from 0.5 to 2.0 μg g⁻¹ DW in L. Sonachi and from 0 to 1.4 μg g⁻¹ DW in L. Simbi. In a monocyanobacterial strain of A. fusiformis, isolated from L. Sonachi, microcystin-YR and anatoxin-a were produced. The concentrations found were 2.2 μg microcystin g⁻¹ DW and 0.3 μg anatoxin-a g⁻¹ DW. This is the first study showing A. fusiformis as producer of microcystins and anatoxin-a. Since A. fusiformis occurs in mass developments in both lakes, a health risk for wildlife can be expected.     

Magnetic nanoparticles supported ionic liquids for lipase immobilization: Enzyme activity in catalyzing esterification

Candida rugosa lipase was immobilized on magnetic nanoparticles supported ionic liquids having different cation chain length (C₁, C₄ and C₈) and anions (Cl⁻, BF₄⁻ and PF₆⁻). Magnetic nanoparticles supported ionic liquids were obtained by covalent bonding of ionic liquids–silane on magnetic silica nanoparticles. The particles are superparamagnetic with diameter of about 55 nm. Large amount of lipase (63.89 mg/(100 mg carrier)) was loaded on the support through ionic adsorption. Activity of the immobilized lipase was examined by the catalysis of esterification between oleic acid and butanol. The activity of bound lipase was 118.3% compared to that of the native lipase. Immobilized lipase maintained 60% of its initial activity even when the temperature was up to 80 °C. In addition, immobilized lipase retained 60% of its initial activity after 8 repeated batches reaction, while no activity was detected after 6 cycles for the free enzyme.     

Paralytic shellfish toxins in zooplankton, mussels, lobsters and caged Atlantic salmon, Salmo salar, during a bloom of Alexandrium fundyense off Grand Manan Island, in the Bay of Fundy

Substantial mortalities of Atlantic salmon (Salmo salar) at two aquaculture sites in Long Island Sound, off Grand Manan Island, Bay of Fundy (BoF) (New Brunswick, Canada) in September 2003, were associated with a bloom of Alexandrium fundyense (>3 × 10⁵ cells L⁻¹), a dinoflagellate alga that produces toxins which cause paralytic shellfish poisoning (PSP). Cells of A. fundyense collected from surface waters while fish were dying had total paralytic shellfish (PS) toxin concentrations of 70.6 pg STX equiv. (saxitoxin equivalents) cell⁻¹ and PS toxin profiles rich in carbamate toxins (78.2%). The zooplankton sampled contained PS toxins (63.1 pg STX equiv. g⁻¹ wet wt) and the toxin profile matched that of A. fundyense cells.Mean PS toxin levels were low (<4 μg STX equiv. 100 g⁻¹ wet wt) in stomach, gill and muscle tissues of moribund salmon, suggesting that PS toxins are very lethal to salmon.The PS toxin concentrations in blue mussels (Mytilus edulis) growing on the salmon cages (37; 526 μg STX equiv. 100 g⁻¹ wet wt) were the highest recorded to date from this region. Their PS toxin profiles showed enhanced carbamate contents (85.5%) compared with that found in A. fundyense. Blue mussels collected from an adjacent Canadian Food Inspection Agency (CFIA) monitoring site in Grand Manan had PS toxin concentrations of 4214 and 150 μg STX equiv. 100 g⁻¹ wet wt in late September and December, respectively, well above the regulatory limit (RL), and horse mussels (Modiolus modiolus) collected in late September had PS toxin concentrations of 2357 μg STX equiv. 100 g⁻¹ wet wt. Detoxification under laboratory conditions suggested that blue mussels may require up to 19 weeks for elimination below RL when they accumulate these high concentrations of PS toxins. This depuration period may be shorter in the field.PS toxin levels above RL were detected in hepatopancreatic tissues of lobster (Homarus americanus), with lower levels (<16 μg STX equiv. 100 g⁻¹ wet wt) in tail muscle and gills.These results illustrate the movement of PS toxins through the marine food chain following an A. fundyense bloom in the BoF, and support earlier studies suggesting that kills from the region of zooplanktivorous fish, such as herring (Clupea harengus harengus), can be attributed to blooms of A. fundyense. This is the first reported incident of PSP associated with mortalities of caged Atlantic salmon in the BoF. Analyses of muscle tissues and viscera from the affected salmon indicated that any portion would not be a health hazard if consumed.     

Long-term exposure of the freshwater shrimp Macrobrachium olfersii to elevated salinity: Effects on gill (Na,K)-ATPase α-subunit expression and K-phosphatase activity

The kinetic properties of a microsomal gill (Na⁺,K⁺)-ATPase from the freshwater shrimp, Macrobrachium olfersii, acclimated to 21‰ salinity for 10 days were investigated using the substrate p-nitrophenylphosphate. The enzyme hydrolyzed this substrate obeying cooperative kinetics at a rate of 123.6 ± 4.9 U mg^− 1 and K_0.5 = 1.31 ± 0.05 mmol L^− 1. Stimulation of K⁺-phosphatase activity by magnesium (V_max = 125.3 ± 7.5 U mg^− 1; K_0.5 = 2.09 ± 0.06 mmol L^− 1), potassium (V_max = 134.2 ± 6.7 U mg^− 1; K_0.5 = 1.33 ± 0.06 mmol L^− 1) and ammonium ions (V_max = 130.1 ± 5.9 U mg^− 1; K_0.5 = 11.4 ± 0.5 mmol L^− 1) was also cooperative. While orthovanadate abolished p-nitrophenylphosphatase activity, ouabain inhibition reached 80% (K_I = 304.9 ± 18.3 μmol L^− 1). The kinetic parameters estimated differ significantly from those for freshwater-acclimated shrimps, suggesting expression of different isoenzymes during salinity adaptation. Despite the ≈2-fold reduction in K⁺-phosphatase specific activity, Western blotting analysis revealed similar α-subunit expression in gill tissue from shrimps acclimated to 21‰ salinity or fresh water, although expression of phosphate-hydrolyzing enzymes other than (Na⁺,K⁺)-ATPase was stimulated by high salinity acclimation.     

Modelling and experimental studies on lipase-catalyzed isoamyl acetate synthesis in a microreactor

A lipase-catalyzed synthesis of isoamyl acetate was studied in a continuously operated pressure-driven microreactor. The esterification of isoamyl alcohol and acetic acid occurred at the interface between n-hexane and an aqueous phase with dissolved lipase B from Candida antarctica. By adjusting flow rates of both phases, a parallel laminar flow with liquid–liquid boundary in the middle of the microchannel could be reestablished and a separation of phases was achieved at the y-shaped exit of the microreactor. Since product remained in the organic phase, this also enabled its continuous separation from the aqueous phase with the enzyme. A three-dimensional mathematical model was developed, considering the velocity profile developed for steady-state conditions between two immiscible fluids. The model contained convection, diffusion, and enzyme reaction terms, where esterification rate was described with a Ping-Pong Bi-Bi mechanism and inhibition by both substrates. Experimental data, which were in good agreement with model simulations, have demonstrated 35% conversion at residence time 36.5 s at 45 °C and at 0.5 M acetic acid and isoamyl alcohol inlet concentrations, which is much faster as in any literature reported so far. According to model simulations, obtained by non-equidistant finite differences numerical solutions of complex non-linear equations system, further microreactor design and process optimization are feasible.     

Secretory expression and characterization of a highly Ca-activated thermostable L2 lipase

Thermostable lipases are important biocatalysts, showing many interesting properties with industrial applications. Previously, a thermophilic Bacillus sp. strain L2 that produces a thermostable lipase was isolated. In this study, the gene encoding for mature thermostable L2 lipase was cloned into a Pichia pastoris expression vector. Under the control of the methanol-inducible alcohol oxidase (AOX) promoter, the recombinant L2 lipase was secreted into the culture medium driven by the Saccharomyces cerevisiae α-factor signal sequence. After optimization the maximum recombinant lipase activity achieved in shake flasks was 125 U/ml. The recombinant 44.5 kDa L2 lipase was purified 1.8-fold using affinity chromatography with 63.2% yield and a specific activity of 458.1 U/mg. Its activity was maximal at 70 °C and pH 8.0. Lipase activity increased 5-fold in the presence of Ca²⁺. L2 lipase showed a preference for medium to long chain triacylglycerols (C₁₀–C₁₆), corn oil, olive oil, soybean oil, and palm oil. Stabilization at high temperature and alkaline pH as well as its broad substrate specificity offer great potential for application in various industries that require high temperature operations.     

Two-stage biological treatment of olive mill wastewater with whey as co-substrate

Olive mill wastewater (OMW) is a highly polluting wastewater, caused by a high organic load and phenol content. These characteristics suggest that it may be suitable for aerobic treatment and anaerobic bacterial digestion. Aerobic treatment coupled with anaerobic bacterial digestion may be economically feasible as the methane produced is a valuable energy source while simultaneously purifying the OMW. In an attempt to improve the overall performance of the process, the addition of a co-substrate such as whey to the aerobic treatment pre-treatment of OMW by the yeast Candida tropicalis was studied.The two-stage system operated satisfactorily up to an organic loading rate (OLR) of 3.0 kg COD L⁻¹ day⁻¹ with a biogas production rate of 1.25 L_biogas L_reactor⁻¹ day⁻¹ and a total COD reduction in excess of 93% (62% COD reduction in aerobic pretreatment and 83% COD reduction in anaerobic digestion). Fifty-four percent of the phenol was biodegraded during the aerobic treatment stage, and biogas with between 68% and 75% methane was produced during anaerobic digestion.     

Stereochemistry of a diastereoisomeric amphiphile and the species of the lipase influence enzyme activity in the transesterification catalyzed by a lipase-co-lyophilizate with the amphiphile in organic media

Modified Candida rugosa and Pseudomonas cepacia lipase (CRL and PCL) were co-lyophilized with two pairs of synthetic diastereoisomeric amphiphiles, d- and l-2-(2,3,4,5,6-pentahydroxy-hexanoylamino)-propyl]-carbamoyl-propionylamino)-pentanedioic acid didodecyl ester (d- and l-BIG2C₁₂CA); d- and l-2-(2,3,4,5,6-pentahydroxy-hexanoylamino)-pentanedioic acid didodecyl ester (d- and l-2C₁₂GE). Enzyme activities of the modified lipase in the transesterification in organic solvent were evaluated. Both pairs of the diastereoisomeric amphiphiles showed enhanced enzyme activity in the transacetylation between racemic sulcatol and isopropenyl acetate in diisopropyl ether, catalyzed by the PCL-co-lyophilizate, by 19–48 fold when compared to the native lipase lyophilized from buffer alone independent of the stereochemistry of the amphiphiles, while in the case of the CRL-co-lyophilizate only the l-BIG2C₁₂CA showed enhanced enzyme activity in the transbutyrylation between racemic solketal and vinyl butyrate in cyclohexane as high as 68–78 fold.     

Water relations and carbon dioxide exchange of epiphytic lichens in the Namib fog desert

Although there is only negligible rainfall, frequent nocturnal fog, dew and high air humidity support a luxurious lichen vegetation in the coastal zone of the central Namib Desert (Namibia). In earlier publications, we have studied ecophysiological performance of a series of epilithic and terrestrial lichens. Here, we have extended this work to three epiphytic species (Heterodermia namaquana, Ramalina lacera, and Xanthoria turbinata) that inhabit the sparse perennial shrubs growing in this area. Our intention, monitoring lichen CO₂ exchange, their water relations and microclimate conditions, was to determine the functional mechanisms that allow these epiphytes to exist under the special conditions of a fog desert. Measurements were conducted mainly during the spring season.The epiphytic lichens showed response patterns very similar to the epilithic and epigaeic species at the same site. Their metabolism was activated through moistening by dew and/or fog during the night and, in the very early morning, they exhibited the typical brief peak of net photosynthesis (NP) between sunrise and desiccation. The thalli were almost completely dry for the remainder of the day. Average duration of the positive NP during the morning peak was about 3 h. Dew condensation, alone, resulted in activation that provided 58–63% of integrated carbon income (ΣNP) as compared to fog (plus dew). In the late afternoon, there was a tendency for hydration to increase again, due to water vapour uptake at higher air humidity, and this allowed on some days a brief additional period of very low rates of photosynthesis shortly before sunset.Light response of photosynthesis showed “sun-plant” characteristics with saturation around 1000 μmol m⁻² s⁻¹ photosynthetically active photon flux density (PPFD). Light compensation point (LCP) of CO₂ exchange after sunrise was highly dependent on actual water content (WC) for X. turbinata: at low hydration it was ca. 10 μmol m⁻² s⁻¹ PPFD whilst, at high WC, it was almost 80 μmol m⁻² s⁻¹ PPFD. In contrast, LCP of R. lacera was almost independent of WC. This phenomenon was probably due to differences in thallus structure.Maximal attained NP and daily ΣNP both showed a saturation-type response to previous maximal nocturnal WC. Neither parameter was increased substantially when higher maximal thallus WCs were produced by experimental moistening in the night. All three species, despite their different morphologies, performed optimally at the highest nocturnal moistening achieved by natural fog and were not able to make use of higher hydration.The three studied epiphytes were similar in their chlorophyll-related rates of NP. Due to lower chlorophyll content, dry weight and carbon-related NP of X. turbinata was only about one-third of that of the other two species. The average carbon income on days with fog and/or dew hydration during the spring season amounted to 2.4 and 2.1 mgC (gC)⁻¹ day⁻¹ (related to thallus carbon content) for H. namaquana and R. lacera, respectively. This primary production was of similar magnitude to those found for the terrestrial species at the same site.