Enhanced electrode-reducing rate during the enrichment process in an air-cathode microbial fuel cell

The improvement in electricity generation during the enrichment process of a microbial consortium was analyzed using an air-cathode microbial fuel cell (MFC) repeatedly fed with acetate that was originally inoculated with sludge from an anaerobic digester. The anodic maximum current density produced by the anode biofilm increased from 0.12 mA/cm² at day 28 to 1.12 mA/cm² at day 105. However, the microbial cell density on the carbon cloth anode increased only three times throughout this same time period from 0.21 to 0.69 mg protein/cm², indicating that the biocatalytic activity of the consortium was also enhanced. The microbial activity was calculated to have a per biomass anode-reducing rate of 374 μmol electron g protein⁻¹ min⁻¹ at day 28 and 1,002 μmol electron g protein⁻¹ min⁻¹ at day 105. A bacterial community analysis of the anode biofilm revealed that the dominant phylotype, which was closely related to the known exoelectrogenic bacterium, Geobacter sulfurreducens, showed an increase in abundance from 32% to 70% of the total microbial cells. Fluorescent in situ hybridization observation also showed the increase of Geobacter-like phylotypes from 53% to 72%. These results suggest that the improvement of microbial current generation in microbial fuel cells is a function of both microbial cell growth on the electrode and changes in the bacterial community highly dominated by a known exoelectrogenic bacterium during the enrichment process.     

Microbial community differences between propionate-fed microbial fuel cell systems under open and closed circuit conditions

We report the electrochemical characterization and microbial community analysis of closed circuit microbial fuel cells (CC-MFCs) and open circuit (OC) cells continuously fed with propionate as substrate. Differences in power output between MFCs correlated with their polarization behavior, which is related to the maturation of the anodophilic communities. The microbial communities residing in the biofilm growing on the electrode, biofouled cation-exchange membrane and anodic chamber liquor of OC-and CC-MFCs were characterized by restriction fragment length polymorphism screening of 16S rRNA gene clone libraries. The results show that the CC-MFC anode was enriched in several microorganisms related to known electrochemically active and dissimilatory Fe(III) reducing bacteria, mostly from the Geobacter spp., to the detriment of Bacteroidetes abundant in the OC-MFC anode. The results also evidenced the lack of a specific pelagic community in the liquor sample. The biofilm growing on the cation-exchange membrane of the CC-MFC was found to be composed of a low-diversity community dominated by two microaerophilic species of the Achromobacter and Azovibrio genus.     

Performance and microbial ecology of air-cathode microbial fuel cells with layered electrode assemblies

Microbial fuel cells (MFCs) can be built with layered electrode assemblies, where the anode, proton exchange membrane (PEM), and cathode are pressed into a single unit. We studied the performance and microbial community structure of MFCs with layered assemblies, addressing the effect of materials and oxygen crossover on the community structure. Four MFCs with layered assemblies were constructed using Nafion or Ultrex PEMs and a plain carbon cloth electrode or a cathode with an oxygen-resistant polytetrafluoroethylene diffusion layer. The MFC with Nafion PEM and cathode diffusion layer achieved the highest power density, 381 mW/m² (20 W/m³). The rates of oxygen diffusion from cathode to anode were three times higher in the MFCs with plain cathodes compared to those with diffusion-layer cathodes. Microsensor studies revealed little accumulation of oxygen within the anode cloth. However, the abundance of bacteria known to use oxygen as an electron acceptor, but not known to have exoelectrogenic activity, was greater in MFCs with plain cathodes. The MFCs with diffusion-layer cathodes had high abundance of exoelectrogenic bacteria within the genus Geobacter. This work suggests that cathode materials can significantly influence oxygen crossover and the relative abundance of exoelectrogenic bacteria on the anode, while PEM materials have little influence on anode community structure. Our results show that oxygen crossover can significantly decrease the performance of air-cathode MFCs with layered assemblies, and therefore limiting crossover may be of particular importance for these types of MFCs.     

Metagenomic Analyses Reveal the Involvement of Syntrophic Consortia in Methanol/Electricity Conversion in Microbial Fuel Cells

Methanol is widely used in industrial processes, and as such, is discharged in large quantities in wastewater. Microbial fuel cells (MFCs) have the potential to recover electric energy from organic pollutants in wastewater; however, the use of MFCs to generate electricity from methanol has not been reported. In the present study, we developed single-chamber MFCs that generated electricity from methanol at the maximum power density of 220 mW m⁻² (based on the projected area of the anode). In order to reveal how microbes generate electricity from methanol, pyrosequencing of 16S rRNA-gene amplicons and Illumina shotgun sequencing of metagenome were conducted. The pyrosequencing detected in abundance Dysgonomonas, Sporomusa, and Desulfovibrio in the electrolyte and anode and cathode biofilms, while Geobacter was detected only in the anode biofilm. Based on known physiological properties of these bacteria, it is considered that Sporomusa converts methanol into acetate, which is then utilized by Geobacter to generate electricity. This speculation is supported by results of shotgun metagenomics of the anode-biofilm microbes, which reconstructed relevant catabolic pathways in these bacteria. These results suggest that methanol is anaerobically catabolized by syntrophic bacterial consortia with electrodes as electron acceptors.     

A lithotrophic microbial fuel cell operated with pseudomonads‐dominated iron‐oxidizing bacteria enriched at the anode

In this study, we attempted to enrich neutrophilic iron bacteria in a microbial fuel cell (MFC)‐type reactor in order to develop a lithotrophic MFC system that can utilize ferrous iron as an inorganic electron donor and operate at neutral pHs. Electrical currents were steadily generated at an average level of 0.6 mA (or 0.024 mA cm^–2 of membrane area) in reactors initially inoculated with microbial sources and operated with 20 mM Fe²⁺ as the sole electron donor and 10 ohm external resistance; whereas in an uninoculated reactor (the control), the average current level only reached 0.2 mA (or 0.008 mA cm^–2 of membrane area). In an inoculated MFC, the generation of electrical currents was correlated with increases in cell density of bacteria in the anode suspension and coupled with the oxidation of ferrous iron. Cultivation‐based and denaturing gradient gel electrophoresis analyses both show the dominance of some Pseudomonas species in the anode communities of the MFCs. Fluorescent in‐situ hybridization results revealed significant increases of neutrophilic iron‐oxidizing bacteria in the anode community of an inoculated MFC. The results, altogether, prove the successful development of a lithotrophic MFC system with iron bacteria enriched at its anode and suggest a chemolithotrophic anode reaction involving some Pseudomonas species as key players in such a system. The system potentially offers unique applications, such as accelerated bioremediation or on‐site biodetection of iron and/or manganese in water samples.     

Carbon/Binder‐Free NiO@NiO/NF with In Situ Formed Interlayer for High‐Areal‐Capacity Lithium Storage

Achieving high areal capacity is a challenge for current lithium‐ion batteries (LIBs). To address this issue, nickel foam (NF), as a free‐standing skeleton suffers from long‐term poor anchor ability for active materials, resulting in detachment from conductive substrates. In addition, the weighty NF damages the overall energy density of the electrode. Herein, an in situ fabrication of interlayer strategy is proposed to effectively address these issues through constructing layer‐by‐layer a 3D structure composed of an inner conductive framework, medial NiO layer, and outer few‐layer NiO nanoflowers in turn (NiO@NiO/NF). The interlayer derived from partial oxidation of NF not only reinforces the attachment of the active layer on NF but also contributes capacity to the whole electrode, leading to excellent stability and areal capacity. When used as the anode of LIBs, ultrahigh reversible capacity of 1.98 mAh cm^?2 is delivered at 1.20 mA cm^?2. The electrode still maintains good integrity and flexibility after 1000 cycles, showing good structure stability. Compared with previous reports, NiO@NiO/NF is one of the most outstanding NiO‐based electrodes. This work proposes a feasible strategy to enhance the capacity and stability of self‐supporting electrodes, and opens a new avenue for high‐areal‐capacity anode of LIBs.     

High Polarity Poly(vinylidene difluoride) Thin Coating for Dendrite‐Free and High‐Performance Lithium Metal Anodes

The high‐polarity β‐phase poly(vinylidene difluoride) (β‐PVDF), which has all trans conformation with F and H atoms located on the opposite sides of the polymer backbone, is demonstrated to be a promising artificial solid‐electrolyte interphase coating on both Cu and Li metal anodes for dendrite‐free Li deposition/stripping and enhanced cycling performance. A thin (≈4 µm) β‐PVDF coating on Cu enables uniform Li deposition/stripping at high current densities up to 5 mA cm^?2, Li‐plating capacity loadings of up to 4 mAh cm^?2, and excellent cycling stability over hundreds of cycles under practical conditions (1 mA cm^?2 with 2 mAh cm^?2). Full cells containing an LiFePO₄ cathode and an anode of either β‐PVDF coated Cu or Li also exhibit excellent cycling stability. The profound effects of the high‐polarity PVDF coating on dendrite suppression are attributed to the electronegative F‐rich interface that favors layer‐by‐layer Li deposition. This study offers a new strategy for the development of dendrite‐free metal anode technology.     

Bifunctional Conducting Polymer Coated CoP Core–Shell Nanowires on Carbon Paper as a Free‐Standing Anode for Sodium Ion Batteries

This study proposes a conformal surface coating of conducting polymer for protecting 1D nanostructured electrode material, thereby enabling a free‐standing electrode without binder for sodium ion batteries. Here, polypyrrole (PPy), which is one of the representative conducting polymers, encapsulated cobalt phosphide (CoP) nanowires (NWs) grown on carbon paper (CP), finally realizes 1D core–shell CoP@PPy NWs/CP. The CoP core is connected to the PPy shell via strong chemical bonding, which can maintain a Co–PPy framework during charge/discharge. It also possesses bifunctional features that enhances the charge transfer and buffers the volume expansion. Consequently, 1D core–shell CoP@PPy NWs/CP demonstrates superb electrochemical performance, delivering a high areal capacity of 0.521 mA h cm^?2 at 0.15 mA cm^?2 after 100 cycles, and 0.443 mA h cm^?2 at 1.5 mA cm^?2 even after 1000 cycles. Even at a high current density of 3 mA cm^?2, a significant areal discharge capacity reaching 0.285 mA h cm^?2 is still maintained. The outstanding performance of the CoP@PPy NWs/CP free‐standing anode provides not only a novel insight into the modulated volume expansion of anode materials but also one of the most effective strategies for binder‐free and free‐standing electrodes with decent mechanical endurance for future secondary batteries.     

Hydrogen production profiles using furans in microbial electrolysis cells

Microbial electrochemical cells including microbial fuel cells (MFCs) and microbial electrolysis cells (MECs) are novel biotechnological tools that can convert organic substances in wastewater or biomass into electricity or hydrogen. Electroactive microbial biofilms used in this technology have ability to transfer electrons from organic compounds to anodes. Evaluation of biofilm formation on anode is crucial for enhancing our understanding of hydrogen generation in terms of substrate utilization by microorganisms. In this study, furfural and hydroxymethylfurfural (HMF) were analyzed for hydrogen generation using single chamber membrane-free MECs (17 mL), and anode biofilms were also examined. MECs were inoculated with mixed bacterial culture enriched using chloroethane sulphonate. Hydrogen was succesfully produced in the presence of HMF, but not furfural. MECs generated similar current densities (5.9 and 6 mA/cm² furfural and HMF, respectively). Biofilm samples obtained on the 24th and 40th day of cultivation using aromatic compounds were evaluated by using epi-fluorescent microscope. Our results show a correlation between biofilm density and hydrogen generation in single chamber MECs.     

A 3D Trilayered CNT/MoSe2/C Heterostructure with an Expanded MoSe2 Interlayer Spacing for an Efficient Sodium Storage

Freestanding composite structures with embedded transition metal dichalcogenides (TMDCs) as the active material are highly attractive in the development of advanced electrodes for energy storage devices. Most 3D electrodes consist of a bilayer design involving a core–shell combination. To further enhance the gravimetric and areal capacities, a 3D trilayer design is proposed that has MoSe₂ as the TMDC sandwiched in‐between an inner carbon nanotube (CNT) core and an outer carbon layer to form a CNT/MoSe₂/C framework. The CNT core creates interconnected pathways for the e^?/Na⁺ conduction, while the conductive inert carbon layer not only protects the corrosive environment between the electrolyte and MoSe₂ but also is fully tunable for an optimized Na⁺ storage. This unique heterostructure is synthesized via a solvothermal‐carbonization approach. Due to annealing under a confined structural configuration, MoSe₂ interlayer spaces are expanded to facilitate a faster Na⁺ diffusion. It is shown that an ≈3 nm thick carbon layer yielded an optimized anode for a sodium‐ion battery. The 3D porosity of the heterostructure remains intact after an intense densification process to produce a high areal capacity of 4.0 mAh cm^?2 and a high mass loading of 13.9 mg cm^?2 with a gravimetric capacity of 347 mAh g^?1 at 500 mA g^?1 after 500 cycles.     

Fast‐Charging and Ultrahigh‐Capacity Lithium Metal Anode Enabled by Surface Alloying

Li metal anodes are going through a great revival but they still encounter grand challenges. One often neglected issue is that most reported Li metal anodes are only cyclable under relatively low current density (<5 mA cm^?2) and small areal capacity (<5 mAh cm^?2), which essentially limits their high‐power applications and results in ineffective Li utilization (<1%). Herein, it is reported that surface alloyed Li metal anodes can enable reversible cycling with ultrafast rate and ultralarge areal capacity. Low‐cost Si wafers are used and are chemically etched down to 20–30 µm membranes. Simply laminating a Si membrane onto Li foil results in the formation of Li_xSi alloy film fused onto Li metal with mechanical robustness and high Li‐ion conductivity. Symmetric cell measurements show that the surface alloyed Li anode has excellent cycling stability, even under high current density up to 25 mA cm^?2 and unprecedented areal capacity up to 100 mAh cm^?2. Furthermore, the surface alloyed Li anode is paired with amorphous MoS₃ cathode and achieves remarkable full‐cell performance.     

In Situ Generation of Artificial Solid‐Electrolyte Interphases on 3D Conducting Scaffolds for High‐Performance Lithium‐Metal Anodes

Rational structure design of the current collector along with further engineering of the solid‐electrolyte interphases (SEI) layer is one of the most promising strategies to achieve uniform Li deposition and inhibit uncontrolled growth of Li dendrites. Here, a Li₂S layer as an artificial SEI with high compositional uniformity and high lithium ion conductivity is in situ generated on the surface of the 3D porous Cu current collector to regulate homogeneous Li plating/stripping. Both simulations and experiments demonstrate that the Li₂S protective layer can passivate the porous Cu skeleton and balance the transport rate of lithium ions and electrons, thereby alleviating the agglomerated Li deposition at the top of the electrode or at the defect area of the SEI layer. As a result, the modified current collector exhibits long‐term cycling of 500 cycles at 1 mA cm^?2 and stable electrodeposition capabilities of 4 mAh cm^?2 at an ultrahigh current density of 4 mA cm^?2. Furthermore, full batteries (LiFePO₄ as cathode) paired with this designed 3D anode with only ≈200% extra lithium show superior stability and rate performance than the batteries paired with lithium foil (≈3000% extra lithium). These explorations provide new strategies for developing high‐performance Li metal anodes.     

Electricity generation using chocolate industry wastewater and its treatment in activated sludge based microbial fuel cell and analysis of developed microbial community in the anode chamber

Feasibility of using chocolate industry wastewater as a substrate for electricity generation using activated sludge as a source of microorganisms was investigated in two-chambered microbial fuel cell. The maximum current generated with membrane and salt bridge MFCs was 3.02 and 2.3 A/m², respectively, at 100 Ω external resistance, whereas the maximum current generated in glucose powered MFC was 3.1 A/m². The use of chocolate industry wastewater in cathode chamber was promising with 4.1 mA current output. Significant reduction in COD, BOD, total solids and total dissolved solids of wastewater by 75%, 65%, 68%, 50%, respectively, indicated effective wastewater treatment in batch experiments. The 16S rDNA analysis of anode biofilm and suspended cells revealed predominance of β-Proteobacteria clones with 50.6% followed by unclassified bacteria (9.9%), α-Proteobacteria (9.1%), other Proteobacteria (9%), Planctomycetes (5.8%), Firmicutes (4.9%), Nitrospora (3.3%), Spirochaetes (3.3%), Bacteroides (2.4%) and γ-Proteobacteria (0.8%). Diverse bacterial groups represented as members of the anode chamber community.     

Open circuit versus closed circuit enrichment of anodic biofilms in MFC: effect on performance and anodic communities

The influence of various carbon anodes; graphite, sponge, paper, cloth, felt, fiber, foam and reticulated vitreous carbon (RVC); on microbial fuel cell (MFC) performance is reported. The feed was brewery wastewater diluted in domestic wastewater. Biofilms were grown at open circuit or under an external load. Microbial diversity was analysed as a function of current and anode material. The bacterial community formed at open circuit was influenced by the anode material. However at closed circuit its role in determining the bacterial consortia formed was less important than the passage of current. The rate and extent of organic matter removal were similar for all materials: over 95% under closed circuit. The biofilm in MFCs working at open circuit and in the control reactors, increased COD removal by up to a factor of nine compared with that for baseline reactors. The average voltage output was 0.6 V at closed circuit, with an external resistor of 300 kΩ and 0.75 V at open circuit for all materials except RVC. The poor performance of this material might be related to the surface area available and concentration polarizations caused by the morphology of the material and the structure of the biofilm. Peak power varied from 1.3 mW m^?2 for RVC to 568 mW m^?2 for graphite with biofilm grown at closed circuit.     

The effect of electrical currents and tobramycin onPseudomonas aeruginosa biofilms

The combined use of antibiotics with low levels of electrical current has been reported to be more effective in controlling biofilms (the bioelectric effect) than antibiotics alone. An electrical colonisation cell was designed to study the effect of antibiotics on biofilms formed on a dialysis membrane away from the electrode surface. To avoid the electrochemical generation of toxic products,Pseudomonas aeruginosa biofilms were formed in minimal salts medium that excluded chloride-containing compounds. Under these conditions, electrical currents of up to 20 mA cm^–2 did not prevent biofilm formation or have any detrimental effect on an established biofilm. Tobramycin alone at concentrations of 10 g ml^–1 did not affect the biofilm, but were significantly enhanced by 9 mA cm^–2. The effect of tobramycin concentrations of 25 g ml^–1 were enhanced by a 15 mA cm^–2 electrical current. In both cases higher levels of electrical current, up to 20 mA cm^–2, did not further enhance the effect of the antibiotic. The possible mechanisms of action of the bioelectric effect have been reported to involve electrophoresis, iontophoresis and electroporesis, thus overcoming the biofilm biomass and cell wall barriers. Our results suggest that other factors may also be important, such as the metabolic activity and growth rate of the bacteria. Such factors may be critical in maximising antibiotic efficacy.     

Diversity and biomass accumulation in cultured phototrophic biofilms

In the present study, biomass development and changes in community composition of phototrophic biofilms grown under different controlled ambient conditions (light, temperature and flow) were examined. Source communities were taken from a wastewater treatment plant and used to inoculate growth surfaces in a semi-continuous-flow microcosm. We recorded biofilm growth curves in cultures over a period of 30 days across 12 experiments. Biovolume of phototrophs and community composition for taxonomic shifts were also obtained using light and electron microscopy. Species richness in the cultured biofilms was greatly reduced with respect to the natural samples, and diversity decreased even further during biofilm development. Diadesmis confervacea, Phormidium spp., Scenedesmus spp. and Synechocystis spp. were identified as key taxa in the microcosm. While a significant positive effect of irradiance on biofilm growth could be identified, impacts of temperature and flow rate on biofilm development and diversity were less evident. We discuss the hypothesis that biofilm development could have been subject to multistability, i.e. the existence of several possible stable biofilm configurations for the same set of environmental parameters; small variations in the species composition might have been sufficient to switch between these different configurations and thus have contributed to overwriting the original effects of temperature and flow velocity.     

Electricity generation from the treatment of wastewater with a hybrid up‐flow microbial fuel cell

The performance of a prototype up‐flow single‐chambered microbial fuel cell (MFC) for electrical power generation using brewery wastewater as fuel is reported. The designed reactor consisted of three zones, namely a lower anaerobic digestion zone, a central MFC zone, and an upper effluent clarifier zone. Tests were conducted in batch mode using a beer wastewater as the fuel/electron donor (COD concentration: 430 mg/L) and mixed consortia (both sewage microflora and anaerobic sludge) as a source of electrogenic bacteria. A stable current density of ～2,270 mA/m² was generated under continuous polarization with a constant external resistance (0.01 kΩ) and cell polarization gave a peak power density of 330 mW/m² at a current density of 1,680 mA/m². Electrochemical impedance analysis showed that the overall internal resistance of the reactor was quite low, that is, 8.0 Ω. Cyclic voltammetric analysis of the anodic biofilm at low scan rate revealed quite complex processes at the anode, with three redox peaks, at potentials of 116, 214, and 319 mV (vs. NHE). Biotechnol. Bioeng. 2010;107: 52–58. © 2010 Wiley Periodicals, Inc.     

Convergent development of anodic bacterial communities in microbial fuel cells

Microbial fuel cells (MFCs) are often inoculated from a single wastewater source. The extent that the inoculum affects community development or power production is unknown. The stable anodic microbial communities in MFCs were examined using three inocula: a wastewater treatment plant sample known to produce consistent power densities, a second wastewater treatment plant sample, and an anaerobic bog sediment. The bog-inoculated MFCs initially produced higher power densities than the wastewater-inoculated MFCs, but after 20 cycles all MFCs on average converged to similar voltages (470±20 mV) and maximum power densities (590±170 mW m⁻²). The power output from replicate bog-inoculated MFCs was not significantly different, but one wastewater-inoculated MFC (UAJA3 (UAJA, University Area Joint Authority Wastewater Treatment Plant)) produced substantially less power. Denaturing gradient gel electrophoresis profiling showed a stable exoelectrogenic biofilm community in all samples after 11 cycles. After 16 cycles the predominance of Geobacter spp. in anode communities was identified using 16S rRNA gene clone libraries (58±10%), fluorescent in-situ hybridization (FISH) (63±6%) and pyrosequencing (81±4%). While the clone library analysis for the underperforming UAJA3 had a significantly lower percentage of Geobacter spp. sequences (36%), suggesting that a predominance of this microbe was needed for convergent power densities, the lower percentage of this species was not verified by FISH or pyrosequencing analyses. These results show that the predominance of Geobacter spp. in acetate-fed systems was consistent with good MFC performance and independent of the inoculum source.     

Sulfate-reducing bacterial community structure and their contribution to carbon mineralization in a wastewater biofilm growing under microaerophilic conditions

The community structure of sulfate-reducing bacteria (SRB) and the contribution of SRB to carbon mineralization in a wastewater biofilm growing under microaerophilic conditions were investigated by combining molecular techniques, molybdate inhibition batch experiments, and microelectrode measurements. A 16S rDNA clone library of bacteria populations was constructed from the biofilm sample. The 102 clones analyzed were grouped into 53 operational taxonomic units (OTUs), where the clone distribution was as follows: Cytophaga-Flexibacter-Bacteroides (41%), Proteobacteria (41%), low-G+C Gram-positive bacteria (18%), and other phyla (3%). Three additional bacterial clone libraries were also constructed from SRB enrichment cultures with propionate, acetate, and H₂ as electron donors to further investigate the differences in SRB community structure due to amendments of different carbon sources. These libraries revealed that SRB clones were phylogenetically diverse and affiliated with six major SRB genera in the delta-subclass of the Proteobacteria. Fluorescent in situ hybridization (FISH) analysis revealed that Desulfobulbus and Desulfonema were the most abundant SRB species in this biofilm, and this higher abundance (ca. 2–4×10⁹ cells cm^–3 and 5×10⁷ filaments cm^–3, respectively) was detected in the surface of the biofilm. Microelectrode measurements showed that a high sulfate-reducing activity was localized in a narrow zone located just below the oxic/anoxic interface when the biofilm was cultured in a synthetic medium with acetate as the sole carbon source. In contrast, a broad sulfate-reducing zone was found in the entire anoxic strata when the biofilm was cultured in the supernatant of the primary settling tank effluent. This is probably because organic carbon sources diffused into the biofilm from the bulk water and an unknown amount of volatile fatty acids was produced in the biofilm. A combined approach of molecular techniques and batch experiments with a specific inhibitor (molybdate) clearly demonstrated that Desulfobulbus is a numerically important member of SRB populations and the main contributor to the oxidation of propionate to acetate in this biofilm. However, acetate was preferentially utilized by nitrate-reducing bacteria but not by acetate-utilizing SRB.     

3D Vertically Aligned Li Metal Anodes with Ultrahigh Cycling Currents and Capacities of 10 mA cm−2/20 mAh cm−2 Realized by Selective Nucleation within Microchannel Walls

Although metallic lithium is regarded as the “Holy Grail” for next‐generation rechargeable batteries due to its high theoretical capacity and low overpotential, the uncontrollable Li dendrite growth, especially under high current densities and deep plating/striping, has inhibited its practical application. Herein, a 3D‐printed, vertically aligned Li anode (3DP‐VALi) is shown to efficiently guide Li deposition via a “nucleation within microchannel walls” process, enabling a high‐performance, dendrite‐free Li anode. Moreover, the microchannels within the microwalls are beneficial for promoting fast Li⁺ diffusion, supplying large space for the accommodation of Li during the plating/stripping process. The high‐surface‐area 3D anode design enables high operating current densities and high areal capacities. As a result, the Li–Li symmetric cells using 3DP‐VALi demonstrate excellent electrochemical performances as high as 10 mA cm^?2/10 mAh cm^?2 for 1500 h and 5 mA cm^?2/20 mAh cm^?2 for 400 h, respectively. Additionally, the Li–S and Li–LiFePO₄ cells using 3DP‐VALi anodes present excellent cycling stability up to 250 and 800 cycles at a rate of 1 C, respectively. It is believed that these new findings could open a new window for dendrite‐free metal anode design and pave the way toward energy storage devices with high energy/power density.