Rapid and simple single nanogram detection of glycoproteins in polyacrylamide gels and on electroblots

The fluorescent hydrazide, Pro-Q Emerald 300 dye, may be conjugated to glycoproteins by a periodic acid Schiff's (PAS) mechanism. The glycols present in glycoproteins are initially oxidized to aldehydes using periodic acid. The dye then reacts with the aldehydes to generate a highly fluorescent conjugate. Reduction with sodium metabisulfite or sodium borohydride is not required to stabilize the conjugate. Though glycoprotein detection may be performed on transfer membranes, direct detection in gels avoids electroblotting and glycoproteins may be visualized within 2-4 h of electrophoresis. This is substantially more rapid than PAS labeling with digoxigenin hydrazide followed by detection with an antidigoxigenin antibody conjugate of alkaline phosphatase, or PAS labeling with biotin hydrazide followed by detection with horseradish peroxidase or alkaline phosphatase conjugates of streptavidin, which require more than eight hours to complete. Pro-Q Emerald 300 dye-labeled gels and blots may be poststained with SYPRO Ruby dye, allowing sequential two-color detection of glycosylated and nonglycosylated proteins. Both fluorophores are excited with mid-range UV illumination. Pro-Q Emerald 300 dye maximally emits at 530 nm (green) while SYPRO Ruby dye maximally emits at 610 nm (red). As little as 300 pg of alpha 1-acid glycoprotein (40% carbohydrate) and 1 ng of glucose oxidase (12% carbohydrate) or avidin (7% carbohydrate) are detectable in gels after staining with Pro-Q Emerald 300 dye. Besides glycoproteins, as little as 2-4 ng of lipopolysaccharide is detectable in gels using Pro-Q Emerald 300 dye while 250-1000 ng is required for detection with conventional silver staining. Detection of glycoproteins may be achieved in sodium dodecyl sulfate-polyacrylamide gels, two-dimensional gels and on polyvinylidene difluoride membranes.     

An improved formulation of SYPRO Ruby protein gel stain: comparison with the original formulation and with a ruthenium II tris (bathophenanthroline disulfonate) formulation

SYPRO Ruby protein gel stain is compatible with a variety of imaging platforms since it absorbs maximally in the ultraviolet (280 nm) and visible (470 nm) regions of the spectrum. Dye localization is achieved by noncovalent, electrostatic and hydrophobic binding to proteins, with signal being detected at 610 nm. Since proteins are not covalently modified by the dye, compatibility with downstream proteomics techniques such as matrix-assisted laser desorption/ionisation-time of flight mass spectrometry is assured. The principal limitation of the original formulation of SYPRO Ruby protein gel stain, is that it was only compatible with a limited number of gel fixation procedures. Too aggressive a fixation protocol led to diminished signal intensity and poor detection sensitivity. This is particularly apparent when post-staining gels subjected to labeling with other fluorophores such as Schiff's base staining of glycoproteins with fluorescent hydrazides. Consequently, we have developed an improved formulation of SYPRO Ruby protein gel stain that is fully compatible with commonly implemented protein fixation procedures and is suitable for post-staining gels after detection of glycoproteins using the green fluorescent Pro-Q Emerald 300 glycoprotein stain or detection of beta-glucuronidase using the green fluorescent ELF 97 beta-D-glucuronide. The new stain formulation is brighter, making it easier to manually excise spots for peptide mass profiling. An additional benefit of the improved formulation is that it permits staining of proteins in isoelectric focusing gels, without the requirement for caustic acids.     

Advantages of picrate fixation for staining polypeptides in polyacrylamide gels

When acetic acid-urea polyacrylamide gels with or without Triton X-100 were immersed in 0.1 M Na picrate, pH 7, to which 1/4 vol Coomassie blue staining solution (0.2% in 45% methanol, 10% acetic acid, 45% water) was added, proteins stained rapidly (within a few minutes in gels without Triton and within an hour in gels with Triton) with little or no background staining. Thus protein bands could be observed in a single step with no destaining. The picrate-Coomassie blue method fixed and stained a small peptide (bradykinin, nine amino acids) that was not observed in gels stained with fast green, silver, or Coomassie blue following fixation in 50% trichloroacetic acid. The picrate-Coomassie blue method gave high-contrast bands suitable for densitometry. Gels containing sodium dodecyl sulfate were also stained by the picrate-Coomassie blue method if they were first washed briefly (1 h) in 45% methanol, 10% acetic acid, 45% water, presumably to remove the detergent. These gels also stained rapidly with almost no background.     

Symmetric and asymmetric squarylium dyes as noncovalent protein labels: a study by fluorimetry and capillary electrophoresis

Noncovalent interactions between two squarylium dyes and various model proteins have been explored. NN127 and SQ-3 are symmetric and asymmetric squarylium dyes, respectively, the fluorescence emissions of which have been shown to be enhanced upon complexation with proteins such as bovine serum albumin (BSA), human serum albumin (HSA), beta-lactoglobulin A, and trypsinogen. Although these dyes are poorly soluble in aqueous solution, they can be dissolved first in methanol followed by dilution with aqueous buffer without precipitation, and are then suitable for use as fluorescent labels in protein determination studies. The nature of interactions between these dyes and proteins was studied using a variety of buffer systems, and it was found that electrostatic interactions are involved but not dominant. Dye/protein stoichiometries in the noncovalent complexes were found to be 1:1 for SQ-3, although various possible stoichiometries were found for NN127 depending upon pH and protein. Association constants on the order of 10(5) and 10(7) were found for noncovalent complexes of SQ-3 and NN127, respectively, with HSA, indicating stronger interactions of the symmetric dye with proteins. Finally, HSA complexes with NN127 were determined by capillary electrophoresis with laser-induced fluorescence detection (CE-LIF). In particular, NN127 shows promise as a reagent capable of fluorescently labeling analyte proteins for analysis by CE-LIF without itself being significantly fluorescent under the aqueous solution conditions studied herein.     

Peptide mapping and microsequencing of proteins separated by SDS-PAGE after limited in situ acid hydrolysis.

A method is described for the isolation of peptide fragments from proteins separated by polyacrylamide gel electrophoresis. After completion of the electrophoresis step, gels are stained with Ponceau S or Coomassie Blue. Gel portions containing protein stained with Ponceau S are excised and transferred to borosilicate glass digestion tubes containing 0.9 ml of 1 mM NaOH or 5 mM Na2HPO4. After complete dissociation of the dye from the protein, 0.1 ml of 20% formic acid is added and the protein is hydrolyzed in situ at 112 degrees C for four hours. Subsequently the acid solution is made 10% in acetonitrile and chromatographed as such on a C18 (C4) reversed-phase column using an appropriate large-volume sample loading syringe and injection loop. Proteins stained with Coomassie Blue can be hydrolyzed in situ after complete removal of the dye with an aqueous solution containing 40% acetone, 10% triethylamine and 5% acetic acid. The gel slices are next washed with HPLC-grade water and protein is hydrolyzed in 2% formic acid under standard conditions. Gel-related contaminants do not interfere with the peptide separation under the proper conditions of HPLC analysis.     

A method for detecting proteins immobilized on nitrocellulose membranes by in situ derivatization with fluorescein isothiocyanate

A method for the fluorescent staining of proteins on nitrocellulose filters is described. The single step procedure uses a 100 microgram/ml solution of fluorescein isothiocyanate in sodium carbonate buffer, pH 9.5. The proteins are visible under uv light within 30 s and the staining reaction is virtually complete after 10 min. The method can detect a minimum of 50 ng protein/band providing a sensitivity similar to that obtained with anionic dye stains. The method is suitable for blots prepared from both isoelectric focusing gels and sodium dodecyl sulfate-polyacrylamide gels. The fluorescently labeled proteins can be probed using immunochemical techniques with the retention of fluorescence. The method can therefore be used to accurately locate antigens among a number of proteins and allows the sensitive and rapid detection of marker proteins directly on the blot.     

In-gel digestion of proteins for internal sequence analysis after one- or two-dimensional gel electrophoresis.

We examined the different steps necessary for the enzymatic digestion of proteins in the polyacrylamide matrix after gel electrophoresis. As a result, we developed an improved method for obtaining peptides for internal sequence analysis from 1-2 micrograms of in-gel-digested proteins. The long washing-lyophilization-equilibration steps necessary to eliminate the dye, sodium dodecyl sulfate, and other gel-associated contaminants that perturb protein digestion in Coomassie blue-stained gels have been replaced by washing for 40 min with 50% acetonitrile, drying for 10 min at room temperature, and then rehydrating with a protease solution. The washing and drying steps result in a substantial reduction of the gel slice volume that, when next swollen in the protease solution, readily absorbs the enzyme, facilitating digestion. The Coomassie blue staining procedure has also been modified by reducing acetic acid and methanol concentrations in the staining solution and by eliminating acetic acid in the destaining solution. The peptides resulting from the in-gel digestion are easily recovered by passive elution, in excellent yields for structural characterization. This simple and rapid method has been successfully applied for the internal sequence analysis of membrane proteins from the rat mitochondria resolved in preparative two-dimensional gel electrophoresis.     

Western blotting and immunochemical detection of histones electrophoretically resolved on acid-urea-Triton- and sodium dodecyl sulfate-polyacrylamide gels

We have developed a method for the efficient transfer of histones from acetic acid-urea-Triton X-100 (AUT)-polyacrylamide minislab gels to nitrocellulose. The AUT gel was equilibrated with 50 mM acetic acid and 0.5% sodium dodecyl sulfate and then with 62.5 mM Tris-HCl, pH 6.8, and 2.3% sodium dodecyl sulfate. An alkaline transfer buffer [25 mM 3-(cyclohexylamino)-1-propanesulfonic acid, pH 10, with 20% methanol] was used to electrophoretically transfer the strongly basic proteins from AUT or sodium dodecyl sulfate gels to nitrocellulose. The applicability of this approach in the immunochemical detection of ubiquitinated histone species is demonstrated.     

Staining of proteins on SDS polyacrylamide gels and on nitrocellulose membranes by Alta, a colour used as a cosmetic

We describe here the use of Alta, a pre-existing scarlet-red stain of cosmetic use, for staining proteins on sodium dodecyl sulfate (SDS) polyacrylamide gels, as well as for a single step staining of gels and nitrocellulose membranes during Western blot analysis. This stain, which is composed of 0.8% Crocein scarlet (brilliant crocein) and 0.2% Rhodamine B, is inexpensive, easy to use and nearly as sensitive as Coomassie Brilliant Blue (CBB) R-250. The gels can be stained in 10% Alta (2 h) and can be destained effectively only with 7% acetic acid as opposed to the conventional destainer (methanol/acetic acid/water) required for CBB-stained gels. In an alternative procedure, the proteins can be stained on the gel while electrophoresis by simply using 5% Alta in the top tank buffer and the stain can be viewed under UV-transilluminator. This procedure can also be used for Western blot analysis, as a single step procedure for staining of proteins on the gel as well as on the nitrocellulose membrane, as the stain is retained on the membrane after protein transfer. Thus, this staining procedure allows monitoring of proteins after each step in the Western blot, thereby eliminating the need to run separate gels for staining and Western blot analysis, and also the need for Ponceau Red S staining of the nitrocellulose membrane during Western blot analysis.     

Dynamics of green fluorescent protein mutant2 in solution, on spin-coated glasses, and encapsulated in wet silica gels

Single-molecule experiments are performed by investigating spectroscopic properties of molecules either diffusing in and out of the observation volume or fixed in space by different immobilization procedures. To evaluate the effect of immobilization methods on the structural and dynamic properties of proteins, a highly fluorescent mutant of the green fluorescent protein, GFPmut2, was spectroscopically characterized in bulk solutions, dispersed on etched glasses, and encapsulated in wet, nanoporous silica gels. The emission spectrum, the fluorescence lifetimes, the anisotropy, and the rotational correlation time of GFPmut2, encapsulated in silica gels, are very similar to those obtained in solution. This finding indicates that the gel matrix does not alter the protein conformation and dynamics. In contrast, the fluorescence lifetimes of GFPmut2 on glasses are two-to fourfold higher and the fluorescence anisotropy decays yield almost no phase shifts. This indicates that the interaction of the protein with the bare glass surface induces a significant structural perturbation and severely restricts the rotational motion. Single molecules of GFPmut2 on glasses or in silica gels, identified by confocal image analysis, show a significant stability to illumination with bleaching times of the order of 90 and 60 sec, respectively. Overall, these data indicate that silica gels represent an ideal matrix for following biologically relevant events at a single molecule level.     

Brilliant Blue as an alternative dye to Fast Green for in ovo electroporation

Chick embryo electroporation is a powerful tool for the introduction of transgenes into tissues of interest for the study of developmental biology. This method often uses Fast Green to visualize the injected area by staining the solution containing DNA green. Here, we show that Fast Green fluoresces in a red color after electroporation, suggesting that researchers need to be cautious when detecting red fluorescence. Fast Green solution did not show any fluorescence before injection into chick embryos, but fluoresced red within 3 min post-injection into chick embryos. We identified Brilliant Blue as suitable alternative dye for use as an indicator of injection sites in ovo electroporation. We found that 0.2% of Brilliant Blue was sufficient to track the area of DNA injection. In addition, this chemical did not show red fluorescence after electroporation. Our findings demonstrate that Brilliant Blue can be used for detecting red fluorescent proteins introduced into chick embryos by electroporation. Our study also shows useful examples for the application of Brilliant Blue for the precise quantification of two fluorescence intensities after EGFP and mCherry co-electroporation.     

The fluorescence scanning of microgels stained for glycoproteins with fluorescein isothiocyanate-labelled concanavalin A.

A technique is presented which allows one to label and quantitate glycoproteins. Small amounts of protein from biological samples (0.5-2.5 microgram for mixtures and less for individual proteins) are separated by sodium dodecyl sulfate gel electrophoresis on 1-30% polyacrylamide gradient microgels. The gels are stained with Co-omassie Brillant Blue R250 to evaluate relative migration or fixed in 2-propanol/acetic acid and stained with fluorescein isothiocyanate-labelled concanavalin A. The microgels are then scanned using a fluorescence microscope controlled by a computer, although simpler configurations are possible. Standards of known carbohydrate composition (e.g., glucose oxidase) are used for comparative purposes. Glycoproteins in the order of 5-30 ng protein (or 1-5 ng carbohydrate) can be detected without difficulty. This technique may prove valuable in evaluating glycoproteins when the available material is limited.     

Simultaneous red/green dual fluorescence detection on electroblots using BODIPY TR-X succinimidyl ester and ELF 39 phosphate

A two-color fluorescence detection method is described based upon covalently coupling the succinimidyl ester of BODIPY TR-X dye to proteins immobilized on polyvinylidene difluoride membranes, followed by detection of target proteins using the fluorogenic, precipitating substrate ELF 39-phosphate in combination with alkaline phosphatase conjugated reporter molecules. This results in all proteins in the profile being visualized as fluorescent red signal while those detected specifically with the alkaline phosphatase conjugate appear as fluorescent green signal. The dichromatic detection system is broadly compatible with ultraviolet epi- or trans-illuminators combined with photographic or charge-coupled device cameras, and xenon-arc sources equipped with appropriate excitation/emission filters. The dichromatic method permits detection of low nanogram amounts of protein and allows for unambiguous identification of target proteins relative to the entire protein profile on a single electroblot, obviating the need to run replicate gels that would otherwise require visualization of total proteins by silver staining and subsequent alignment with chemiluminescent or colorimetric signals generated on electroblots. Combining the detection approach with an Alexa Fluor 350 dye conjugated monoclonal antibody permits simultaneous fluorescence detection of two antigens and the total protein profile on the same electroblot.     

The visualization of human erythrocyte membrane proteins and glycoproteins in SDS polyacrylamide gels employing a single staining procedure.

Human erythrocyte membrane proteins and glycoproteins were visualized after separation by sodium dodecyl sulfate polyacrylamide gels into molecular weight classes using a single staining procedure with a cationic carbocyanine dye (“Stains-all”). The sialoglycoproteins stained blue; the proteins, red; and the lipids, yellow-orange. This method is useful in detecting simultaneously the position of proteins and sialoglycoproteins in the commonly used SDS polyacrylamide gel electrophoresis.     

Analysis of allosteric signal transduction mechanisms in an engineered fluorescent maltose biosensor

We previously reported the construction of a family of reagentless fluorescent biosensor proteins by the structure-based design of conjugation sites for a single, environmentally sensitive small molecule dye, thus providing a mechanism for the transduction of ligand-induced conformational changes into a macroscopic fluorescence observable. Here we investigate the microscopic mechanisms that may be responsible for the macroscopic fluorescent changes in such Fluorescent Allosteric Signal Transduction (FAST) proteins. As case studies, we selected three individual cysteine mutations (F92C, D95C, and S233C) of Escherichia coli maltose binding protein (MBP) covalently labeled with a single small molecule fluorescent probe, N-((2-iodoacetoxy)ethyl)-N-methyl)amino-7-nitrobenz-2-oxa-1,3-diazole (NBD), each giving rise to a robust FAST protein with a distinct maltose-dependent fluorescence response. The fluorescence emission intensity, anisotropy, lifetime, and iodide-dependent fluorescence quenching were determined for each conjugate in the presence and absence of maltose. Structure-derived solvent accessible surface areas of the three FAST proteins are consistent with experimentally observed quenching data. The D95C protein exhibits the largest fluorescence change upon maltose binding. This mutant was selected for further characterization, and residues surrounding the fluorophore coupling site were mutagenized. Analysis of the resulting mutant FAST proteins suggests that specific hydrogen-bonding interactions between the fluorophore molecule and two tyrosine side-chains, Tyr171 and Tyr176, in the open state but not the closed, are responsible for the dramatic fluorescence response of this construct. Taken together these results provide insights that can be used in future design cycles to construct fluorescent biosensors that optimize signaling by engineering specific hydrogen bonds between a fluorophore and protein.     

Global quantitative phosphoprotein analysis using Multiplexed Proteomics technology

Systematic parallel analysis of the phosphorylation status of networks of interacting proteins involved in the regulatory circuitry of cells and tissues is certain to drive research in the post-genomics era for many years to come. Reversible protein phosphorylation plays a critical regulatory role in a multitude of cellular processes, including alterations in signal transduction pathways related to oncogene and tumor suppressor gene products in cancer. While fluorescence detection methods are likely to offer the best solution to global protein quantitation in proteomics, to date, there has been no satisfactory method for the specific and reversible fluorescent detection of gel-separated phosphoproteins from complex samples. The newly developed Pro-Q Diamond phosphoprotein dye technology is suitable for the fluorescent detection of phosphoserine-, phosphothreonine-, and phosphotyrosine-containing proteins directly in sodium dodecyl sulfate (SDS)-polyacrylamide gels and two-dimensional (2-D) gels. Additionally, the technology is appropriate for the determination of protein kinase and phosphatase substrate preference. Other macromolecules, such as DNA, RNA, and sulfated glycans, fail to be detected with Pro-Q Diamond dye. The staining procedure is rapid, simple to perform, readily reversible and fully compatible with modern microchemical analysis procedures, such as matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry. Pro-Q Diamond dye technology can detect as little as 1-2 ng of beta-casein, a pentaphosphorylated protein, and 8 ng of pepsin, a monophosphorylated protein. Fluorescence signal intensity correlates with the number of phosphorylated residues on the protein. Through combination of Pro-Q Diamond phosphoprotein stain with SYPRO(R) Ruby protein gel stain, Multiplexed Proteomics technology permits quantitative, dichromatic fluorescence detection of proteins in 2-D gels. This evolving discovery platform allows the parallel determination of protein expression level changes and altered post-translational modification patterns within a single 2-D gel experiment. The linear responses of the fluorescence dyes utilized, allow rigorous quantitation of changes over an unprecedented 500-1000-fold concentration range.     

Labial Gland and Its Protein Patterns of Hydropsychid Caddisfly (Hydropsyche kozhantschikovi Martynov: Trichoptera)

ABSTRACT There is a pair of labial gland of hydropsychid caddisfly ( Hydropsyche kozhantschikovi Martynov) larva. It is in 'Z' formation in the body and the total length is about 20 mm. Hydropsychid caddishfly larvae that were raised under the lab conditions were able to form a nest-spining by connecting the small grains of sand provided. By repeatedly treating the extracted labial gland with methanol/D.W., the cell layer was removed. Accordingly, only the matrix within the labial gland that did not dissolve in water was obtained. The matrix inside the methanol/D.W. treated labial gland was dissolved with 5% acetic acid. Then the results of an acidic electrophoresis with a number of conditions indicated that 5% acetic acid/ 5 M urea/ 8% PAGE was the most effective. Moreover, the result of 2-D PAGE on the labial gland of these hydropsychid caddisfly larva, the number of proteins in the labial gland including the cell layer was about 350 and the number of proteins in the labial gland treated with methanol/D.W. was about 80, showing a substantially small number of proteins.     

Comparison of fixation protocols for adherent cultured cells applied to a GFP fusion protein of the epidermal growth factor receptor

BACKGROUND: The analysis of the subcellular distribution of proteins is essential for the understanding of processes such as signal transduction. In most cases, the parallel analysis of multiple components requires fixation and immunofluorescence labeling. Therefore, one has to ascertain that the fixation procedure preserves the in vivo protein distribution. Fusion proteins with the green fluorescent protein (GFP) are ideal tools for this purpose. However, one must consider specific aspects of the fluorophore formation or degradation, i.e. reactions that may interfere with the detection of GFP fusion proteins. METHODS: Fusion proteins of the epidermal growth factor receptor (EGFR) with GFP as well as free, soluble GFP stably or transiently expressed in adherent cultured cells served as test cases for comparing the distribution in vivo with that after fixation by conventional epifluorescence and laser scanning microscopy. Indirect immunofluorescence was employed to compare the distributions of the GFP signal and of the GFP polypeptide in the fusion protein. RESULTS: Paraformaldehyde (PFA) fixation with subsequent mounting in the antifading agent Mowiol, but not in Tris- or HEPES buffered saline, led to a partial redistribution of the EGFR from the plasma membrane to the perinuclear region. The redistribution was confirmed with the GFP and EGFR immunofluorescence. The in vivo distribution in Mowiol mounted cells was preserved if cells were treated with a combined PFA/methanol fixation procedure, which also retained the fluorescence of soluble GFP. The anti-GFP antiserum was negative for the N-terminal fusion protein. CONCLUSIONS: The combined PFA/methanol protocol is universally applicable for the fixation of transmembrane and soluble cytoplasmic proteins and preserves the fluorescence of GFP.     

灰葡萄孢菌过氧化物酶体及细胞核的荧光蛋白标记

【目的】对灰葡萄孢菌(Botrytis cinerea)的细胞核和过氧化物酶体进行荧光蛋白标记,为研究其生长发育和侵染过程中细胞结构和细胞器动态提供基础。【方法】以绿色荧光蛋白(GFP)和红色荧光蛋白(DsRED、mCherry)为报告基因,利用根癌农杆菌介导转化(Agrobacterium tumefaciens mediated transformation,AtMT)将3种荧光蛋白标记载体分别导入灰葡萄孢菌标准菌株B05.10;通过PCR检测及荧光观察筛选和验证转化子,并进行单孢纯化;利用共聚焦显微镜记录细胞器荧光定位情况。【结果】获得了过氧化物酶体或细胞核稳定表达红、绿色荧光的重组单孢菌株,PCR验证表明标记基因成功整合入转化子基因组。在标记细胞核的菌株中,菌丝和孢子中可见多个明亮、圆形的荧光点,与DAPI染色共定位。标记过氧化物酶体的菌株中,菌丝和孢子中可见小点状绿色或红色荧光,在脂类物质诱导下荧光点数量明显增加,符合过氧化物酶体分布及动态特征。细胞壁染色结果显示,细胞壁染色产生的蓝色荧光与红、绿荧光蛋白的荧光互不干扰,标记效果良好。【结论】获得了理想的过氧化物酶体或细胞核荧光标记的灰葡萄孢菌菌株,为研究其细胞器动态以及生长发育与致病分子机制提供了参考和材料。     

Determination of protein by Coomassie dye-binding in agarose gels

A variation of the Coomassie dye-binding assay for proteins is described. Protein samples were pipetted to the surface of agarose plates in uniformly sized spots and stained with Coomassie Blue G-250. The bound dye was determined by densitometric scanning using double wavelength and flying spot facilities. The response curves were linear in an about 10-fold concentration range with a lower detection limit of 0.5 microgram. No background correction was necessary because unbound dye and most substances known to interfere with other protein assays were removed during the staining and destaining of the agarose gels. Membrane proteins could be analyzed since the samples were applied as solutions in 1% sodium dodecyl sulfate.