ATP binding and hydrolysis-driven rate-determining events in the RFC-catalyzed PCNA clamp loading reaction

The multi-subunit replication factor C (RFC) complex loads circular proliferating cell nuclear antigen (PCNA) clamps onto DNA where they serve as mobile tethers for polymerases and coordinate the functions of many other DNA metabolic proteins. The clamp loading reaction is complex, involving multiple components (RFC, PCNA, DNA, and ATP) and events (minimally: PCNA opening/closing, DNA binding/release, and ATP binding/hydrolysis) that yield a topologically linked clamp·DNA product in less than a second. Here, we report pre-steady-state measurements of several steps in the reaction catalyzed by Saccharomyces cerevisiae RFC and present a comprehensive kinetic model based on global analysis of the data. Highlights of the reaction mechanism are that ATP binding to RFC initiates slow activation of the clamp loader, enabling it to open PCNA (at ~2 s(-1)) and bind primer-template DNA (ptDNA). Rapid binding of ptDNA leads to formation of the RFC·ATP·PCNA(open)·ptDNA complex, which catalyzes a burst of ATP hydrolysis. Another slow step in the reaction follows ATP hydrolysis and is associated with PCNA closure around ptDNA (8 s(-1)). Dissociation of PCNA·ptDNA from RFC leads to catalytic turnover. We propose that these early and late rate-determining events are intramolecular conformational changes in RFC and PCNA that control clamp opening and closure, and that ATP binding and hydrolysis switch RFC between conformations with high and low affinities, respectively, for open PCNA and ptDNA, and thus bookend the clamp loading reaction.     

The replication factor C clamp loader requires arginine finger sensors to drive DNA binding and proliferating cell nuclear antigen loading

Replication factor C (RFC) is an AAA+ heteropentamer that couples the energy of ATP binding and hydrolysis to the loading of the DNA polymerase processivity clamp, proliferating cell nuclear antigen (PCNA), onto DNA. RFC consists of five subunits in a spiral arrangement (RFC-A, -B, -C, -D, and -E, corresponding to subunits RFC1, RFC4, RFC3, RFC2, and RFC5, respectively). The RFC subunits are AAA+ family proteins and the complex contains four ATP sites (sites A, B, C, and D) located at subunit interfaces. In each ATP site, an arginine residue from one subunit is located near the gamma-phosphate of ATP bound in the adjacent subunit. These arginines act as "arginine fingers" that can potentially perform two functions: sensing that ATP is bound and catalyzing ATP hydrolysis. In this study, the arginine fingers in RFC were mutated to examine the steps in the PCNA loading mechanism that occur after RFC binds ATP. This report finds that the ATP sites of RFC function in distinct steps during loading of PCNA onto DNA. ATP binding to RFC powers recruitment and opening of PCNA and activates a gamma-phosphate sensor in ATP site C that promotes DNA association. ATP hydrolysis in site D is uniquely stimulated by PCNA, and we propose that this event is coupled to PCNA closure around DNA, which starts an ordered hydrolysis around the ring. PCNA closure severs contact to RFC subunits D and E (RFC2 and RFC5), and the gamma-phosphate sensor of ATP site C is switched off, resulting in low affinity of RFC for DNA and ejection of RFC from the site of PCNA loading.     

Distinct roles for ATP binding and hydrolysis at individual subunits of an archaeal clamp loader

Circular clamps are utilised by replicative polymerases to enhance processivity. The topological problem of loading a toroidal clamp onto DNA is overcome by ATP-dependent clamp loader complexes. Different organisms use related protein machines to load clamps, but the mechanisms by which they utilise ATP are surprisingly different. Using mutant clamp loaders that are deficient in either ATP binding or hydrolysis in different subunits, we show how the different subunits of an archaeal clamp loader use ATP binding and hydrolysis in distinct ways at different steps in the loading process. Binding of nucleotide by the large subunit and three of the four small subunits is sufficient for clamp loading. However, ATP hydrolysis by the small subunits is required for release of PCNA to allow formation of the complex between PCNA and the polymerase, while hydrolysis by the large subunit is required for catalytic clamp loading.     

Multiple ATP binding is required to stabilize the "activated" (clamp open) clamp loader of the T4 DNA replication complex

Most DNA replication systems include a sliding clamp that encircles the genomic DNA and links the polymerase to the template to control polymerase processivity. A loading complex is required to open the clamp and place it onto the DNA. In phage T4 this complex consists of a trimeric clamp of gp45 subunits and a pentameric loader assembly of four gp44 and one gp62 subunit(s), with clamp loading driven by ATP binding. We measure this binding as a function of input ligand concentration and show that four ATPs bind to the gp44/62 complex with equal affinity. In contrast, the ATPase rate profile of the clamp-clamp loader complex exhibits a marked peak at an input ATP concentration close to the overall Kd (approximately 30 microm), with further increases in bound ATP decreasing the ATPase rate to a much lower level. Thus the progressive binding of the four ATPs triggers a conformational change in the complex that markedly inhibits ATPase activity. This inhibition is related to ring opening by using a clamp that is covalently cross-linked across its subunit interfaces and thus rendered incapable of opening. Binding of this clamp abolishes substrate inhibition of the ATPase but leaves ATP binding unchanged. We show that four ATP ligands must bind to the T4 clamp loader before the loader can be fully "activated" and the clamp opened, and that ATP hydrolysis is required only for release of the loader complex after clamp loading onto the replication fork has been completed.     

Replication factor C clamp loader subunit arrangement within the circular pentamer and its attachment points to proliferating cell nuclear antigen

Replication factor C (RFC) is a heteropentameric AAA+ protein clamp loader of the proliferating cell nuclear antigen (PCNA) processivity factor. The prokaryotic homologue, gamma complex, is also a heteropentamer, and structural studies show the subunits are arranged in a circle. In this report, Saccharomyces cerevisiae RFC protomers are examined for their interaction with each other and PCNA. The data lead to a model of subunit order around the circle. A characteristic of AAA+ oligomers is the use of bipartite ATP sites in which one subunit supplies a catalytic arginine residue for hydrolysis of ATP bound to the neighboring subunit. We find that the RFC(3/4) complex is a DNA-dependent ATPase, and we use this activity to determine that RFC3 supplies a catalytic arginine to the ATP site of RFC4. This information, combined with the subunit arrangement, defines the composition of the remaining ATP sites. Furthermore, the RFC(2/3) and RFC(3/4) subassemblies bind stably to PCNA, yet neither RFC2 nor RFC4 bind tightly to PCNA, indicating that RFC3 forms a strong contact point to PCNA. The RFC1 subunit also binds PCNA tightly, and we identify two hydrophobic residues in RFC1 that are important for this interaction. Therefore, at least two subunits in RFC make strong contacts with PCNA, unlike the Escherichia coli gamma complex in which only one subunit makes strong contact with the beta clamp. Multiple strong contact points to PCNA may reflect the extra demands of loading the PCNA trimeric ring onto DNA compared with the dimeric beta ring.     

Requirement for ATP by the DNA damage checkpoint clamp loader

The DNA damage clamp loader replication factor C (RFC-Rad24) consists of the Rad24 protein and the four small Rfc2-5 subunits of RFC. This complex loads the heterotrimeric DNA damage clamp consisting of Rad17, Mec3, and Ddc1 (Rad17/3/1) onto partial duplex DNA in an ATP-dependent manner. Interactions between the clamp loader and the clamp have been proposed to mirror those of the replication clamp loader RFC and the sliding clamp proliferating cell nuclear antigen (PCNA). In that system, three ATP molecules bound to the Rfc2, Rfc3, and Rfc4 subunits are necessary and sufficient for efficient loading of PCNA, whereas ATP binding to Rfc1 is not required. In contrast, in this study, we show that mutant RFC-Rad24 with a rad24-K115E mutation in the ATP-binding domain of Rad24 shows defects in the ATPase of the complex and is defective for interaction with Rad17/3/1 and for loading of the checkpoint clamp. A similar defect was measured with a mutant RFC-Rad24 clamp loader carrying a rfc4K55R ATP-binding mutation, whereas the rfc4K55E clamp loader showed partial loading activity, in agreement with genetic studies of these mutants. These studies show that ATP utilization by the checkpoint clamp/clamp loader system is effectively different from that by the structurally analogous replication system.     

Interplay of clamp loader subunits in opening the beta sliding clamp of Escherichia coli DNA polymerase III holoenzyme

The Escherichia coli beta dimer is a ring-shaped protein that encircles DNA and acts as a sliding clamp to tether the replicase, DNA polymerase III holoenzyme, to DNA. The gamma complex (gammadeltadelta'chipsi) clamp loader couples ATP to the opening and closing of beta in assembly of the ring onto DNA. These proteins are functionally and structurally conserved in all cells. The eukaryotic equivalents are the replication factor C (RFC) clamp loader and the proliferating cell nuclear antigen (PCNA) clamp. The delta subunit of the E. coli gamma complex clamp loader is known to bind beta and open it by parting one of the dimer interfaces. This study demonstrates that other subunits of gamma complex also bind beta, although weaker than delta. The gamma subunit like delta, affects the opening of beta, but with a lower efficiency than delta. The delta' subunit regulates both gamma and delta ring opening activities in a fashion that is modulated by ATP interaction with gamma. The implications of these actions for the workings of the E. coli clamp loading machinery and for eukaryotic RFC and PCNA are discussed.     

Molecular modeling-based analysis of interactions in the RFC-dependent clamp-loading process

Replication and related processes in eukaryotic cells require replication factor C (RFC) to load a molecular clamp for DNA polymerase in an ATP-driven process, involving multiple molecular interactions. The detailed understanding of this mechanism is hindered by the lack of data regarding structure, mutual arrangement, and dynamics of the players involved. In this study, we analyzed interactions that take place during loading onto DNA of either the PCNA clamp or the Rad9-Rad1-Hus1 checkpoint complex, using computationally derived molecular models. Combining the modeled structures for each RFC subunit with known structural, biochemical, and genetic data, we propose detailed models of how two of the RFC subunits, RFC1 and RFC3, interact with the C-terminal regions of PCNA. RFC1 is predicted to bind PCNA similarly to the p21-PCNA interaction, while the RFC3-PCNA binding is proposed to be similar to the E. coli delta-beta interaction. Additional sequence and structure analysis, supported by experimental data, suggests that RFC5 might be the third clamp loader subunit to bind the equivalent PCNA region. We discuss functional implications stemming from the proposed model of the RFC1-PCNA interaction and compare putative clamp-interacting regions in RFC1 and its paralogs, Rad17 and Ctf18. Based on the individual intermolecular interactions, we propose RFC and PCNA arrangement that places three RFC subunits in association with each of the three C-terminal regions in PCNA. The two other RFC subunits are positioned at the two PCNA interfaces, with the third PCNA interface left unobstructed. In addition, we map interactions at the level of individual subunits between the alternative clamp loader/clamp system, Rad17-RFC(2-5)/Rad9-Rad1-Hus1. The proposed models of interaction between two clamp/clamp loader pairs provide both structural framework for interpretation of existing experimental data and a number of specific findings that can be subjected to direct experimental testing.     

Replication protein A-directed unloading of PCNA by the Ctf18 cohesion establishment complex

The replication clamp PCNA is loaded around DNA by replication factor C (RFC) and functions in DNA replication and repair. Regulated unloading of PCNA during the progression and termination of DNA replication may require additional factors. Here we show that a Saccharomyces cerevisiae complex required for the establishment of sister chromatid cohesion functions as an efficient unloader of PCNA. Unloading requires ATP hydrolysis. This seven-subunit Ctf18-RFC complex consists of the four small subunits of RFC, together with Ctf18, Dcc1, and Ctf8. Ctf18-RFC was also a weak loader of PCNA onto naked template-primer DNA. However, when the single-stranded DNA template was coated by the yeast single-stranded DNA binding protein replication protein A (RPA) but not by a mutant form of RPA or a heterologous single-stranded DNA binding protein, both binding of Ctf18-RFC to substrate DNA and loading of PCNA were strongly inhibited, and unloading predominated. Neither yeast RFC itself nor two other related clamp loaders, containing either Rad24 or Elg1, catalyzed significant unloading of PCNA. The Dcc1 and Ctf8 subunits of Ctf18-RFC, while required for establishing sister chromatid cohesion in vivo, did not function specifically in PCNA unloading in vitro, thereby separating the functionality of the Ctf18-RFC complex into two distinct paths.     

Evolutionary clues to eukaryotic DNA clamp-loading mechanisms: analysis of the functional constraints imposed on replication factor C AAA+ ATPases

Ring-shaped sliding clamps encircle DNA and bind to DNA polymerase, thereby preventing it from falling off during DNA replication. In eukaryotes, sliding clamps are loaded onto DNA by the replication factor C (RFC) complex, which consists of five distinct subunits (A–E), each of which contains an AAA+ module composed of a RecA-like α/β ATPase domain followed by a helical domain. AAA+ ATPases mediate chaperone-like protein remodeling. Despite remarkable progress in our understanding of clamp loaders, it is still unclear how recognition of primed DNA by RFC triggers ATP hydrolysis and how hydrolysis leads to conformational changes that can load the clamp onto DNA. While these questions can, of course, only be resolved experimentally, the design of such experiments is itself non-trivial and requires that one first formulate the right hypotheses based on preliminary observations. The functional constraints imposed on protein sequences during evolution are potential sources of information in this regard, inasmuch as these presumably are due to and thus reflect underlying mechanisms. Here, rigorous statistical procedures are used to measure and compare the constraints imposed on various RFC clamp-loader subunits, each of which performs a related but somewhat different, specialized function. Visualization of these constraints, within the context of the RFC structure, provides clues regarding clamp-loader mechanisms—suggesting, for example, that RFC-A possesses a triggering component for DNA-dependent ATP hydrolysis. It also suggests that, starting with RFC-A, four RFC subunits (A–D) are sequentially activated through a propagated switching mechanism in which a conserved arginine swings away from a position that disrupts the catalytic Walker B region and into contact with DNA thread through the center of the RFC/clamp complex. Strong constraints near regions of interaction between subunits and with the clamp likewise provide clues regarding possible coupling of hydrolysis-driven conformational changes to the clamp's release and loading onto DNA.     

ATP utilization by yeast replication factor C. III. The ATP-binding domains of Rfc2, Rfc3, and Rfc4 are essential for DNA recognition and clamp loading.

The conserved lysine in the Walker A motif of the ATP-binding domain encoded by the yeast RFC1, RFC2, RFC3, and RFC4 genes was mutated to glutamic acid. Complexes of replication factor C with a N-terminal truncation (Delta2-273) of the Rfc1 subunit (RFC) containing a single mutant subunit were overproduced in Escherichia coli for biochemical analysis. All of the mutant RFC complexes were capable of interacting with PCNA. Complexes containing a rfc1-K359E mutation were similar to wild type in replication activity and ATPase activity; however, the mutant complex showed increased susceptibility to proteolysis. In contrast, complexes containing either a rfc2-K71E mutation or a rfc3-K59E mutation were severely impaired in ATPase and clamp loading activity. In addition to their defects in ATP hydrolysis, these complexes were defective for DNA binding. A mutant complex containing the rfc4-K55E mutation performed as well as a wild type complex in clamp loading, but only at very high ATP concentrations. Mutant RFC complexes containing rfc2-K71R or rfc3-K59R, carrying a conservative lysine --> arginine mutation, had much milder clamp loading defects that could be partially (rfc2-K71R) or completely (rfc3-K59R) suppressed at high ATP concentrations.     

Mechanism of proliferating cell nuclear antigen clamp opening by replication factor C

The eukaryotic replication factor C (RFC) clamp loader is an AAA+ spiral-shaped heteropentamer that opens and closes the circular proliferating cell nuclear antigen (PCNA) clamp processivity factor on DNA. In this study, we examined the roles of individual RFC subunits in opening the PCNA clamp. Interestingly, Rfc1, which occupies the position analogous to the delta clamp-opening subunit in the Escherichia coli clamp loader, is not required to open PCNA. The Rfc5 subunit is required to open PCNA. Consistent with this result, Rfc2.3.4.5 and Rfc2.5 subassemblies are capable of opening and unloading PCNA from circular DNA. Rfc5 is positioned opposite the PCNA interface from Rfc1, and therefore, its action with Rfc2 in opening PCNA indicates that PCNA is opened from the opposite side of the interface that the E. coli delta wrench acts upon. This marks a significant departure in the mechanism of eukaryotic and prokaryotic clamp loaders. Interestingly, the Rad.RFC DNA damage checkpoint clamp loader unloads PCNA clamps from DNA. We propose that Rad.RFC may clear PCNA from DNA to facilitate shutdown of replication in the face of DNA damage.     

ATP utilization by yeast replication factor C. I. ATP-mediated interaction with DNA and with proliferating cell nuclear antigen.

Eukaryotic replication factor C is the heteropentameric complex that loads the replication clamp proliferating cell nuclear antigen (PCNA) onto primed DNA. In this study we used a derivative, designated RFC, with a N-terminal truncation of the Rfc1 subunit removing a DNA-binding domain not required for clamp loading. Interactions of yeast RFC with PCNA and DNA were studied by surface plasmon resonance. Binding of RFC to PCNA was stimulated by either adenosine (3-thiotriphosphate) (ATPgammaS) or ATP. RFC bound only to primer-template DNA coated with the single-stranded DNA-binding protein RPA if ATPgammaS was also present. Binding occurred without dissociation of RPA. ATP did not stimulate binding of RFC to DNA, suggesting that hydrolysis of ATP dissociated DNA-bound RFC. However, when RFC and PCNA together were flowed across the DNA chip in the presence of ATP, a signal was observed suggesting loading of PCNA by RFC. With ATPgammaS present instead of ATP, long-lived response signals were observed indicative of loading complexes arrested on the DNA. A primer with a 3' single-stranded extension also allowed loading of PCNA; yet turnover of the reaction intermediates was dramatically slowed down. Filter binding experiments and analysis of proteins bound to DNA-magnetic beads confirmed the conclusions drawn from the surface plasmon resonance studies.     

Communication between subunits within an archaeal clamp-loader complex

We have investigated the communication between subunits in replication factor C (RFC) from Archaeoglobus fulgidus. Mutation of the proposed arginine finger in the small subunits results in a complex that can still bind ATP but has impaired clamp-loading activity, a process that normally only requires binding of nucleotide. The small subunit alone forms a hexameric ring that is six-fold symmetric in the absence of ATP. However, this symmetry is broken when the nucleotide is bound to the complex. A conformational change associated with nucleotide binding may relate to the opening of PCNA rings by RFC during the loading reaction. The structures also reveal the importance of the N-terminal helix of each subunit at the ATP-binding site. Analysis of mutant protein complexes containing subunits lacking this N-terminal helix reveals key distinct regulatory roles during clamp loading that are different for the large and small subunits in the RFC complex.     

The ATP Sites of AAA+ Clamp Loaders Work Together as a Switch to Assemble Clamps on DNA

Clamp loaders belong to a family of proteins known as ATPases associated with various cellular activities (AAA+). These proteins utilize the energy from ATP binding and hydrolysis to perform cellular functions. The clamp loader is required to load the clamp onto DNA for use by DNA polymerases to increase processivity. ATP binding and hydrolysis are coordinated by several key residues, including a conserved Lys located within the Walker A motif (or P-loop). This residue is required for each subunit to bind ATP. The specific function of each ATP molecule bound to the Saccharomyces cerevisiae clamp loader is unknown. A series of point mutants, each lacking a single Walker A Lys residue, was generated to study the effects of abolishing ATP binding in individual clamp loader subunits. A variety of biochemical assays were used to analyze the function of ATP binding during discrete steps of the clamp loading reaction. All mutants reduced clamp binding/opening to different degrees. Decreased clamp binding activity was generally correlated with decreases in the population of open clamps, suggesting that differences in the binding affinities of Walker A mutants stem from differences in stabilization of proliferating cell nuclear antigen in an open conformation. Walker A mutations had a smaller effect on DNA binding than clamp binding/opening. Our data do not support a model in which each ATP site functions independently to regulate a different step in the clamp loading cycle to coordinate these steps. Instead, the ATP sites work in unison to promote conformational changes in the clamp loader that drive clamp loading.     

On the mechanism of loading the PCNA sliding clamp by RFC

Sliding clamps play central roles in a broad range of DNA replication and repair processes. The clamps form circular molecules that must be opened and resealed around DNA by the clamp loader complex to fulfil their function. While most eukaryotes and many archea possess a homo-trimeric PCNA, the PCNA of Sulfolobus solfataricus is a heterotrimer. Here, we exploit the asymmetry of S. solfataricus PCNA to create a series of circularly permuted PCNA subunit fusions, thereby covalently closing defined interfaces within the heterotrimer. Using these concatamers, we investigate the requirements for loading the clamp onto DNA and reveal that a single defined interface within the heterotrimer is opened during the loading process. Subunit–specific interactions between S. solfataricus RFC clamp loader and PCNA permit us to superimpose our data upon the structure of yeast RFC–PCNA complex, thereby presenting a general model for PCNA loading by RFC in archaea and eukaryotes.     

ATP utilization by yeast replication factor C. II. Multiple stepwise ATP binding events are required to load proliferating cell nuclear antigen onto primed DNA.

Binding of adenosine (3-thiotriphosphate) (ATPgammaS), a nonhydrolyzable analog of ATP, to replication factor C with a N-terminal truncation (Delta2-273) of the Rfc1 subunit (RFC) was studied by filter binding. RFC alone bound 1.8 ATPgammaS molecules. However, when either PCNA or primer-template DNA were also present 2.6 or 2.7 ATPgammaS molecules, respectively, were bound. When both PCNA and DNA were present 3.6 ATPgammaS molecules were bound per RFC. Order of addition experiments using surface plasmon resonance indicate that RFC forms an ATP-mediated binary complex with PCNA prior to formation of a ternary DNA.PCNA.RFC complex. An ATP-mediated complex between RFC and DNA was not competent for binding PCNA, and the RFC.DNA complex dissociated with hydrolysis of ATP. Based on these experiments a model is proposed in which: (i) RFC binds two ATPs (RFC.ATP(2)); (ii) this complex binds PCNA (PCNA.RFC.ATP(2)), which goes through a conformational change to reveal a binding site for one additional ATP (PCNA.RFC.ATP(3)); (iii) this complex can bind DNA to yield DNA.PCNA.RFC.ATP(3); (iv) a conformational change in the latter complex reveals a fourth binding site for ATP; and (v) the DNA.PCNA.RFC.ATP(4) complex is finally competent for completion of PCNA loading and release of RFC upon hydrolysis of ATP.     

Ordered ATP hydrolysis in the gamma complex clamp loader AAA+ machine

The gamma complex couples ATP hydrolysis to the loading of beta sliding clamps onto DNA for processive replication. The gamma complex structure shows that the clamp loader subunits are arranged as a circular heteropentamer. The three gamma motor subunits bind ATP, the delta wrench opens the beta ring, and the delta' stator modulates the delta-beta interaction. Neither delta nor delta' bind ATP. This report demonstrates that the delta' stator contributes a catalytic arginine for hydrolysis of ATP bound to the adjacent gamma(1) subunit. Thus, the delta' stator contributes to the motor function of the gamma trimer. Mutation of arginine 169 of gamma, which removes the catalytic arginines from only the gamma(2) and gamma(3) ATP sites, abolishes ATPase activity even though ATP site 1 is intact and all three sites are filled. This result implies that hydrolysis of the three ATP molecules occurs in a particular order, the reverse of ATP binding, where ATP in site 1 is not hydrolyzed until ATP in sites 2 and/or 3 is hydrolyzed. Implications of these results to clamp loaders of other systems are discussed.     

Biochemical characterisation of the clamp/clamp loader proteins from the euryarchaeon Archaeoglobus fulgidus

Replicative polymerases of eukaryotes, prokaryotes and archaea obtain processivity using ring-shaped DNA sliding clamps that are loaded onto DNA by clamp loaders [replication factor C (RFC) in eukaryotes]. In this study, we cloned the two genes for the subunits of the RFC homologue of the euryarchaeon Archaeoglobus fulgidus. The proteins were expressed and purified from Escherichia coli both individually and as a complex. The afRFC subunits form a heteropentameric complex consisting of one copy of the large subunit and four copies of the small subunits. To analyse the functionality of afRFC, we also expressed the A.fulgidus PCNA homologue and a type B polymerase (PolB1) in E.coli. In primer extension assays, afRFC stimulated the processivity of afPolB1 in afPCNA-dependent reactions. Although the afRFC complex showed significant DNA-dependent ATPase activity, which could be further stimulated by afPCNA, neither of the isolated afRFC subunits showed this activity. However, both the large and small afRFC subunits showed interaction with afPCNA. Furthermore, we demonstrate that ATP binding, but not hydrolysis, is needed to stimulate interactions of the afRFC complex with afPCNA and DNA.     

Reverse-chaperoning activity of an AAA+ protein

Speed and processivity of replicative DNA polymerases can be enhanced via coupling to a sliding clamp. Due to the closed ring shape of the clamp, a clamp loader protein, belonging to the AAA+ class of ATPases, needs to open the ring-shaped clamp before loading it to DNA. Here, we developed real-time fluorescence assays to study the clamp (PCNA) and the clamp loader (RFC) from the mesophilic archaeon Methanosarcina acetivorans. Unexpectedly, we discovered that RFC can assemble a PCNA ring from monomers in solution. A motion-based DNA polymerization assay showed that the PCNA assembled by RFC is functional. This PCNA assembly activity required the ATP-bound conformation of RFC. Our work demonstrates a reverse-chaperoning activity for an AAA+ protein that can act as a template for the assembly of another protein complex.