应用多重PCR鉴定微生物肥料常用芽孢杆菌

[目的]枯草群芽孢杆菌中枯草芽孢杆菌(Bacillus subtilis)、解淀粉芽孢杆菌(B.amyloliq-wefaciens)、地衣芽孢杆菌(B.licheniformis)和短小芽孢杆菌(B.pumilus)是微生物肥料中常用菌种,用传统方法鉴定费时费力,有必要建立检测和鉴定这些芽孢杆菌的种特异性PCR方法.[方法]利用已登录的gyrA、rpoA和16s rRNA基因序列分别设计和筛选上述菌种的特异引物并建立多重PCR反应体系.[结果]以基因组DNA为模板,扩增芽孢杆菌、类芽孢杆菌和短芽孢杆菌3属15种的标准菌株(共33株),4个目标种分别产生了大小不同的唯一的产物,除个别种与短小芽孢杆菌引物有交叉反应外,其余参考菌株均为阴性.从23株枯草群菌株的基因组DNA扩增发现,PCR鉴定与常规鉴定结果一致.[结论]本文建立的多重PCR方法具有较好的特异性,可快速准确鉴定枯草群的4个种,在微生物肥料检测方面有良好的实用前景.     

利用扩增片段长度多态性分析鉴别炭疽和蜡样芽孢杆菌

目的:利用扩增片段长度多态性(AFLP)分析建立鉴别炭疽芽孢杆菌和蜡样芽孢杆菌的分子生物学方法。方法:3株炭疽芽孢杆菌和3株蜡样芽孢杆菌基因组经限制性内切酶EcoRⅠ和MseⅠ酶切后与对应接头连接,通过预扩增和选择性扩增获得特异性DNA片段,将片段进行毛细管电泳,并利用GeneScan和BioNumerics软件对电泳数据进行分析。结果:选择性扩增最佳引物组合为EcoRⅠ-G/MseⅠ-A,其扩增片段在100~500 bp范围内的有效数量为40~50条;比较炭疽芽孢杆菌和蜡样芽孢杆菌的AFLP特征峰值图和DNA指纹图谱,确定了5个有明显差异的片段区。结论:利用AFLP分析可对芽孢杆菌属中相近的炭疽芽孢杆菌和蜡样芽孢杆菌进行鉴别,该方法可作为炭疽芽孢杆菌传统鉴定方法的补充。     

应用实时荧光PCR检测致病性蜡样芽孢杆菌

目的:利用SYBRGreenⅠ染料能与双链DNA结合发出荧光的特点,建立一种用来检测致病性蜡样芽孢杆菌(B.cereus)的实时PCR方法。方法:对致病性蜡样芽孢杆菌致病相关基因cereolysinAB基因序列进行分析,设计1对特异引物,通过对SYBRGreenⅠ实时PCR反应条件的优化,实现对致病性蜡样芽孢杆菌的检测。结果:该方法具有较强的灵敏性及特异性,能够对致病性蜡样芽孢杆菌进行有效检测,其最低检出限可达8CFU/mL。结论:利用该技术检测蜡样芽孢杆菌,较常规的生化检测方法具有省时省力的特点,且灵敏性较高,具有实际应用价值。     

动物用芽孢杆菌微生态制剂中蜡样芽孢杆菌的分离及安全性

【背景】芽孢杆菌是仅次于乳酸菌常用于微生态制剂中的菌种,然而部分芽孢杆菌微生态制剂规范不严,应用存在安全隐患。【目的】调查我国在售动物用芽孢杆菌微生态制剂中蜡样芽孢杆菌携带情况,揭示蜡样芽孢杆菌应用的潜在风险。【方法】对微生态制剂预处理,选择性筛选分离蜡样芽孢杆菌,通过全基因组测序测绘细菌毒素基因谱与耐药基因谱,细胞计数试剂盒-8法测定菌株对细胞的毒性,利用微量肉汤稀释法确定菌株耐药值。【结果】从50份微生态制剂产品中筛选分离得到23株蜡样芽孢杆菌群细菌,它们对氨苄西林、林可霉素和泰妙菌素3种抗生素均耐药,主要毒力基因nhe、hbl、cytK、ces的检出率分别为100%、30%、39%和4%,分离株均有溶血性且39%菌株产生热稳定毒素,不同菌株对非洲绿猴肾细胞呈现出不同程度的毒性。【结论】微生态制剂来源的蜡样芽孢杆菌毒性与耐药性严重,携带毒素基因与耐药基因广泛,多株菌株呈高细胞毒性且产生热稳定毒素。芽孢杆菌微生态制剂存在安全性问题,应加强对蜡样芽孢杆菌的质量安全监管力度,规范微生态制剂的市场秩序,杜绝安全隐患。     

PCR法快速鉴定眼源性蜡样芽胞杆菌

目的建立一种快速、灵敏、特异的眼源性蜡样芽胞杆菌PCR检测方法,为蜡样芽胞杆菌性眼内炎患者的快速诊断提供依据。方法选择编码蜡样芽胞杆菌细胞毒素的cytK为靶基因设计引物,建立检测眼源性蜡样芽胞杆菌PCR;PCR产物用琼脂糖凝胶电泳鉴定,基因序列与GenBank比对验证扩增产物;将计数过的5株蜡样芽胞杆菌菌悬液,梯度稀释后分别提取DNA进行PCR扩增,确定检测方法的灵敏度;分别用眼部常见感染菌金黄色葡萄球菌、表皮葡萄球菌、甲型溶血性链球菌、化脓性链球菌、藤黄微球菌、铜绿假单胞菌、大肠埃希菌、普通变形杆菌和白假丝酵母菌以及枯草芽胞杆菌DNA进行特异性试验;进一步将该方法应用到人工污染致病蜡样芽胞杆菌的房水标本中,并分析其灵敏度。结果5株分离自眼内炎患者标本中的蜡样芽胞杆菌均扩增出360bp左右的DNA片段,测序结果与GenBank比对一致;该法检测在5h内完成,方法灵敏度达7．5～15．0CFU／mL;其他菌株检测未出现非特异性扩增;对模拟感染房水标本的PCR鉴定结果与分离培养对比,二者符合率为100％,模拟标本的检测灵敏度与纯菌结果一致。结论cytK基因为靶基因的PCR用于眼源性蜡样芽胞杆菌的快速检测,具有简便、快速、敏感、特异等特点,为眼内炎患者的快速诊断提供依据,在实际检验工作中有良好的应用前景。     

利用PCR技术检测致病性腊样芽孢杆菌的研究

目的：利用PCR技术对致病性蜡样芽孢杆菌（Bacillus cereus）进行检测。方法：对致病性蜡样芽孢杆菌溶血素HBLa基因序列进行分析设计一对特异引物,通过优化PCR反应条件,来实现对致病蜡样芽孢杆菌的快速检测,结果：该方法具有较强的灵敏性及特异性,能够对肠毒素型腊样芽孢杆菌进行有效的检测,其最低检出限可达9CFU／ml,用PCR技术对食物样品中致病性蜡样芽孢杆菌的检测取得与普通生化检测方法一致的结果。结论：利用PCR技术对食品中蜡样芽孢杆菌的检测较常规的生化检测方法具有省时省力的特点且灵敏性较高,具有较强的实际应用价值。     

草莓中蜡样芽孢杆菌的VITEK快速检测

采用形态、生理生化以及生物分子等多种手段开展了草莓中芽孢杆菌的鉴定研究,结果确认草莓携带的芽孢菌为蜡样芽孢杆菌。实验表明了VITEK微生物自动鉴定系统可快速检测草莓中的芽孢菌,结果可靠,为开发草莓杀菌抑菌技术提供了参考。     

基于比较基因组学的高地芽孢杆菌6ww6分子标识筛选及其快速鉴定

【目的】高地芽孢杆菌(Bacillus altitudinis) 6ww6是一株根际耐盐促生菌,可以作为微生物肥料的优选菌种。为了加强菌种知识产权保护,建立菌株快速检测方法。【方法】本研究通过基因组比对分析、TBLASTn检索、NR库检索验证并剔除有其他同源的结果序列,最终得到菌株6ww6的孤儿基因,设计引物进行PCR鉴定。【结果】筛选出5个特异性基因J939_13195、J9319_05960、J9319_13355、J9319_05965和J9319_13350。引物5960F和5960R可以单一性扩增出菌株6ww6的目的基因J9319_05960,确定其为菌株6ww6的特异性分子标识。【结论】本研究确定了菌株6ww6的唯一性身份编码,建立了以比较基因组学和孤儿基因为基础的菌株水平上的鉴定方法。该方法具有快速、精确、能鉴定到菌株水平的优点,对于有价值微生物的知识产权保护提供了有力的抓手。     

一株自中国大鲵的副炭疽芽孢杆菌分离和鉴定

[目的]对陕西某大鲵养殖场患病的中国大鲵腹水中分离培养得到的一株蜡样芽孢杆菌群细菌疑似菌株进行鉴定,明确该菌生长特性和种类。[方法]无菌解剖患病大鲵,取肠道、腹水、皮肤等各部位的样品均质稀释并分离纯化,从腹水中获得疑似蜡样芽孢杆菌群细菌的纯菌株,命名为SHOU-BC01。对该菌株进行形态与染色特性、培养与生化特性、生物膜形成能力、芽孢形成、药敏检测、全基因组测序等试验鉴定,并根据测序结果进行平均核苷酸相似度(average nucleotide identity,ANI)、数字DNA-DNA杂交(digital DNA-DNA hybridization,dDDH)、多位点序列分型(multilocus sequence typing,MLST)、全基因组SNP聚类和毒力因子分析。[结果]菌株SHOU-BC01为革兰氏阳性杆菌,表面粗糙;具有蛋白酶、卵磷脂酶和溶血酶活性;能够发酵L-阿拉伯糖、D-核糖、D-木糖等多种糖类,能利用色氨酸、丙酮酸盐等;有较强生物膜形成能力;120 h的芽孢形成率达到70.60%;该菌株对青霉素G、头孢噻吩、万古霉素等15种抗生素耐药,对哌拉西林、头孢唑啉、庆大霉素等25种抗生素敏感;根据生物学特性结合ANI、dDDH及全基因组SNP聚类分析,鉴定菌株SHOU-BC01为副炭疽芽孢杆菌(Bacillus paranthracis),经MLST分型,该菌株属于ST205序列型;该菌株含有鞘磷脂酶、CytK和NheC毒素、多糖荚膜、PlcR-PapR群感效应系统及Ⅶ型分泌系统等毒力因子。[结论]成功从中国大鲵腹水中分离出副炭疽芽孢杆菌,丰富了大鲵副炭疽芽孢杆菌数据。     

ERIC-PCR鉴别苏云金芽胞杆菌与蜡状芽胞杆菌的研究

利用ERIC-PCR技术对苏云金芽孢杆菌(Bt)、蜡状芽孢杆菌(Bc)和对照菌基因组DNA进行扩增,回收、标记BtPCR扩增片段,分别与各菌株的基因组DNA进行斑点杂交和Southern杂交,筛选Bt标识序列。结果显示:Bt各菌株均可扩增得到250bp的特异片段;Bt和Bc均可得到600bp的共有扩增片段;以筛选得到的569bp片段为探针,可特异性地与Bt基因组DNA杂交;ERIC-PCR技术可以在DNA指纹图谱水平区分鉴别Bt与Bc菌,正确反映出两者的亲缘关系。结果表明ERIC-PCR技术在Bt的检测及在Bt与Bc的鉴定中具有较强的实用性。     

Heat-stable toxin production by strains of Bacillus cereus, Bacillus firmus, Bacillus megaterium, Bacillus simplex and Bacillus licheniformis

Strains of Bacillus cereus can produce a heat-stable toxin (cereulide). In this study, 101 Bacillus strains representing 7 Bacillus species were tested for production of heat-stable toxins. Strains of B. megaterium, B. firmus and B. simplex were found to produce novel heat-stable toxins, which showed varying levels of toxicity. B. cereus strains (18 out of 54) were positive for toxin production. Thirteen were of serovar H1, and it was of interest that some were of clinical origin. Two were of serovars 17B and 20, which are not usually implicated in the emetic syndrome. Partial purification of the novel B. megaterium, B. simplex and B. firmus toxins showed they had similar physical characteristics to the B. cereus emetic toxin, cereulide.     

Identification of emetic toxin producing Bacillus cereus strains by a novel molecular assay

Bacillus cereus causes two types of gastrointestinal diseases: emesis and diarrhea. The emetic type of the disease is attributed to the heat-stable depsipeptide cereulide and symptoms resemble Staphylococcus aureus intoxication, but there is no rapid method available to detect B. cereus strains causing this type of disease. In this study, a polymerase chain reaction (PCR) fragment of unknown function was identified, which was shown to be specific for emetic toxin producing strains of B. cereus. The sequence of this amplicon was determined and a PCR assay was developed on this basis. One hundred B. cereus isolates obtained from different food poisoning outbreaks and diverse food sources from various geographical locations and 29 strains from other species belonging to the B. cereus group were tested by this assay. In addition, 49 non-B. cereus group strains, with special emphasis on food pathogens, were used to show that the assay is specific for emetic toxin producing B. cereus strains. The presented PCR assay is the first molecular tool for the rapid detection of emetic toxin producing B. cereus strains.     

The Bacillus cereus bceT enterotoxin sequence reappraised

Bacillus cereus is a known opportunistic human pathogen belonging to the B. cereus group. Establishment of the pathogenesis most likely involves several gene products. One of these gene products, a single gene component named bceT, has been cloned and described from B. cereus B-4ac [Agata et al., Microbiology 141 (1995) 983-988]. However, our sequences of the bceT region from 16 B. cereus group strains showed inconsistency with the published bceT sequence. Only part of the bceT sequence had homology to our sequences. This initiated a more thorough investigation of the bceT sequence. Restriction site search and database searches intimated that the cloned bceT was created by an incidental joining of four DNA fragments during ligation. One of these fragments had 93% homology to an open reading frame (ORF 101) located within the pathogenic island of the Bacillus anthracis pXO1 virulence plasmid. We suggest that the reported enterotoxic activity of the original cloned bceT construct could be due to either the fusion gene or the fragment with homology to ORF 101 in pXO1.     

Polymerase chain reaction assay for the detection of Bacillus cereus group cells

Recent investigations have shown that members of the Bacillus cereus group carry genes which have the potential to cause gastrointestinal and somatic diseases. Although most cases of diseases caused by the B. cereus group bacteria are relatively mild, it is desirable to be able to detect members of the B. cereus group in food and in the environment. Using 16S rDNA as target, a PCR assay for the detection of B. cereus group cells has been developed. Primers specific for the 16S rDNA of the B. cereus group bacteria were selected and used in combination with consensus primers for 16S rDNA as internal PCR procedure control. The PCR procedure was optimized with respect to annealing temperature. When DNA from the B. cereus group bacteria was present, the PCR assay yielded a B. cereus specific fragment, while when non-B. cereus prokaryotic DNA was present, the consensus 16S rDNA primers directed synthesis of the PCR products. The PCR analyses with DNA from a number of non-B. cereus confirmed the specificity of the PCR assay.     

Development of a PCR assay for identification of the Bacillus cereus group species

Aims:  A PCR technique was developed as a reliable and rapid identification method for the Bacillus cereus group species, based on a unique conserved sequence of the motB gene (encoding flagellar motor protein) from B. cereus , Bacillus thuringiensis and Bacillus anthracis .
Methods and Results:  Primer locations were identified against eight strains of the B. cereus group spp. from nucleotide sequences available in the National Centre for Biotechnology Information database. The PCR assay was applied for the identification of 117 strains of the B. cereus group spp. and 19 strains from other microbial species, with special emphasis on foodborne pathogens.
Conclusion:  The designed cross-species primers are group specific and did not react with DNA from other Bacillus and non- Bacillus species either motile or not. The primers system enabled us to detect 10³ CFU of B. cereus cells per millilitre of sample.
Significance and Impact of the Study:  Bacillus cereus group spp. belongs to one of the most prevalent foodborne pathogens. Bacterial growth results in production of different toxins; therefore, consumption of food containing >10⁶ bacteria per gram may result in emetic and diarrhoeal syndromes. A rapid and sensitive bacterial detection method is significant for food safety.     

Virulent spores of Bacillus anthracis and other Bacillus species deposited on solid surfaces have similar sensitivity to chemical decontaminants

AIMS: To compare the relative sensitivity of Bacillus anthracis and spores of other Bacillus spp. deposited on different solid surfaces to inactivation by liquid chemical disinfecting agents. METHODS AND RESULTS: We prepared under similar conditions spores from five different virulent and three attenuated strains of B. anthracis, as well as spores of Bacillus subtilis, Bacillus atrophaeus (previously known as Bacillus globigii), Bacillus cereus, Bacillus thuringiensis and Bacillus megaterium. As spore-surface interactions may bias inactivation experiments, we evaluated the relative binding of different spores to carrier materials. The survival of spores deposited on glass, metallic or polymeric surfaces were quantitatively measured by ASTM standard method E-2414-05 which recovers spores from surfaces by increasing stringency. The number of spores inactivated by each decontaminant was similar and generally within 1 log among the 12 different Bacillus strains tested. This similarity among Bacillus strains and species was observed through a range of sporicidal efficacy on spores deposited on painted metal, polymeric rubber or glass. CONCLUSIONS: The data obtained indicate that the sensitivity of common simulants (B. atrophaeus and B. subtilis), as well as spores of B. cereus, B. thuringiensis, and B. megaterium, to inactivation by products that contain either: peroxide, chlorine or oxidants is similar to that shown by spores from all eight B. anthracis strains studied. SIGNIFICANCE AND IMPACT OF THE STUDY: The comparative results of the present study suggest that decontamination and sterilization data obtained with simulants can be safely extrapolated to virulent spores of B. anthracis. Thus, valid conclusions on sporicidal efficacy could be drawn from safer and less costly experiments employing non-pathogenic spore simulants.     

Multiplex PCR assay for the detection of enterotoxic <Emphasis Type="Italic">Bacillus cereus</Emphasis> group strains and its application in food matrices

Bacillus cereus, Bacillus thuringiensis and Bacillus anthracis are the major concerns for the food safety in terms of frequency and/or seriousness of the disease. Being members of the same group and sharing DNA homology to a larger extent, they do create problems when their specific detection/identification is attempted from different food and environmental sources. Numerous individual polymerase chain reaction (PCR) and few multiplex PCR (mPCR) methods have been employed to detect these organisms by targeting toxin genes but with lack of internal amplification control (IAC). Therefore, we attempted a mPCR with IAC for the detection of enterotoxic B. cereus group strains by selecting hbl A, nhe A and cyt K genes from B. cereus, indicative of the diarrheal potential and cry I A and pag genes, the plasmid borne phenotypic markers specific to B. thuringiensis and B. anthracis strains, respectively. Multiplex PCR assay validation was performed by simultaneous comparison with the results of single-target PCR assays and correlated to the classical conventional and biochemical identification of the organisms. The mPCR was able to detect as low as 10¹–10² organisms per ml following overnight enrichment of spiked food samples (vegetable biriyani and milk) in buffered peptone water (BPW). The presence of these organisms could also be detected by mPCR in naturally contaminated samples of rice based dishes and milk. The high throughput and cost-effective mPCR method described could provide a powerful tool for simultaneous, rapid and reliable detection of enterotoxic B. cereus group organisms.     

Differentiation of Bacillus anthracis and other 'Bacillus cereus group' bacteria using IS231-derived sequences

Abstract Sequences based on the conserved 20 bp inverted repeat of IS 231 variants were used as polymerase chain reaction-based fingerprinting primers of the member species of the Bacillus cereus group ( B. anthracis, B. cereus, B. thuringiensis and B. mycoides ), because of their close association with transposons, principally Tn 4430 in B. thuringiensis . Fingerprints of B. anthracis were simple, and specifically allowed its identification and sub-differentiation from other members of the group. Fingerprints for B. cereus were strain-specific; those for B. thuringensis gave a 1650 bp product, characteristic of 1S 231 variants A-F. The same reaction conditions gave one or two bands for both B. anthracis and B. cereus that differed by restriction endonuclease mapping from the B. thuringiensis PCR product and established IS 231 restriction maps; this does not preclude some kind of relationship between these products and IS 231 .     

Comparison of PCR-RFLP, ribotyping and ERIC-PCR for typing Bacillus anthracis and Bacillus cereus strains

PCR-RFLP analysis of the vrrA gene and cerAB gene was used to investigate the genomic diversity in 21 strains of Bacillus anthracis and 28 strains of Bacillus cereus, and was compared with results obtained by ribotyping and enterobacterial repetitive intergenic consensus-PCR (ERIC-PCR) analysis. VrrA-typing divided the B. anthracis into four groups. Except for one Pasteur vaccine strain, the vrrA PCR-RFLP profiles of the B. anthracis were separated into three groups, which were different from those of the B. cereus strains. Ribotyping separated the B. anthracis isolates into seven ribotypes, and a common fragment of an approximately 850 bp band from the ERIC-PCR fingerprints separated most B. anthracis strains into two groups. VrrA/cerAB PCR-RFLP, ribotyping and ERIC-PCR generated 18, 22 and 23 types, respectively, from B. cereus strains. The results suggest that a combination of all three methods provides a high resolution typing method for B. anthracis and B. cereus. Compared with ribotyping and ERIC-PCR, PCR-RFLP is simple to perform and has potential as a rapid method for typing and discriminating B. anthracis strains from other B. cereus group bacteria.