The folding mechanism of collagen-like model peptides explored through detailed molecular simulations

Collagen has a unique folding mechanism that begins with the formation of a triple-helical structure near its C terminus followed by propagation of this structure to the N terminus. To elucidate factors that affect the folding of collagen, we explored the folding pathway of collagen-like model peptides using detailed molecular simulations with explicit solvent. Using biased molecular dynamics we examined the latter stages of folding of a peptide model of native collagen, (Pro-Hyp-Gly)10, and a peptide that models a Gly --> Ser mutation found in several forms of osteogenesis imperfecta, (Pro-Hyp-Gly)3-Pro-Hyp-Ser-(Pro-Hyp-Gly)6. Starting from an unfolded state that contains a C-terminal nucleated trimer, (Pro-Hyp-Gly)10 folds to a structure where two of the three chains associate through water-mediated hydrogen bonds and the third is relatively separated from this dimer. Calculated free-energy profiles for folding from this intermediate to the final triple-helical structure suggest that further folding occurs at a rate of approximately one Pro-Hyp-Gly triplet per msec. In contrast, after 6 nsec of biased dynamics, the region N-terminal to the Ser residue in (Pro-Hyp-Gly)3-Pro-Hyp-Ser-(Pro-Hyp-Gly)6 folds to a structure where the three chains form close contacts near the N terminus, away from the mutation site. Further folding to an ideal triple-helical structure at the site of the mutation is unfavorable as the free energy of a triple-helical conformation at this position is more than 20 kcal/mol higher than that of a structure with unassociated chains. These data provide insights into the folding pathway of native collagen and the events underlying the formation of misfolded structures.     

Staggered molecular packing in crystals of a collagen-like peptide with a single charged pair

The crystal structure of the triple-helical peptide, (Pro-Hyp-Gly)(4)-Glu-Lys-Gly-(Pro-Hyp-Gly)(5) has been determined to 1.75 A resolution. This peptide was designed to examine the effect of a pair of adjacent, oppositely charged residues on collagen triple-helical conformation and intermolecular interactions. The molecular conformation (a 7(5) triple helix) and hydrogen bonding schemes are similar to those previously reported for collagen triple helices and provides a second instance of water mediated N--H . . . O==C interchain hydrogen bonds for the amide group of the residue following Gly. Although stereochemically capable of forming intramolecular or intermolecular ion pairs, the lysine and glutamic acid side-chains instead display direct interactions with carbonyl groups and hydroxyproline hydroxyl groups or interactions mediated by water molecules. Solution studies on the EKG peptide indicate stabilization at neutral pH values, where both Glu and Lys are ionized, but suggest that this occurs because of the effects of ionization on the individual residues, rather than ion pair formation. The EKG structure suggests a molecular mechanism for such stabilization through indirect hydrogen bonding. The molecular packing in the crystal includes an axial stagger between molecules, reminiscent of that observed in D-periodic collagen fibrils. The presence of a Glu-Lys-Gly triplet in the middle of the sequence appears to mediate this staggered molecular packing through its indirect water-mediated interactions with backbone C==O groups and side chains.     

Triple-helical peptides: an approach to collagen conformation, stability, and self-association

Peptides have been an integral part of the collagen triple-helix structure story, and have continued to serve as useful models for biophysical studies and for establishing biologically important sequence-structure-function relationships. High resolution structures of triple-helical peptides have confirmed the basic Ramachandran triple-helix model and provided new insights into the hydration, hydrogen bonding, and sequence dependent helical parameters in collagen. The dependence of collagen triple-helix stability on the residues in its (Gly-X-Y)(n) repeating sequence has been investigated by measuring melting temperatures of host-guest peptides and an on-line collagen stability calculator is now available. Although the presence of Gly as every third residue is essential for an undistorted structure, interruptions in the repeating (Gly-X-Y)(n) amino acid sequence pattern are found in the triple-helical domains of all nonfibrillar collagens, and are likely to play a role in collagen binding and degradation. Peptide models indicate that small interruptions can be incorporated into a rod-like triple-helix with a highly localized effect, which perturbs hydrogen bonds and places the standard triple-helices on both ends out of register. In contrast to natural interruptions, missense mutations which replace one Gly in a triple-helix domain by a larger residue have pathological consequences, and studies on peptides containing such Gly substitutions clarify their effect on conformation, stability, and folding. Recent studies suggest peptides may also be useful in defining the basic principles of collagen self-association to the supramolecular structures found in tissues.     

Sequence dependence of kinetics and morphology of collagen model peptide self-assembly into higher order structures

The process of self-assembly of the triple-helical peptide (Pro-Hyp-Gly)(10) into higher order structure resembles the nucleation-growth mechanism of collagen fibril formation in many features, but the irregular morphology of the self-assembled peptide contrasts with the ordered fibers and networks formed by collagen in vivo. The amino acid sequence in the central region of the (Pro-Hyp-Gly)(10) peptide was varied and found to affect the kinetics of self-assembly and nature of the higher order structure formed. Single amino acid changes in the central triplet produced irregular higher order structures similar to (Pro-Hyp-Gly)(10), but the rate of self-association was markedly delayed by a single change in one Pro to Ala or Leu. The introduction of a Hyp-rich hydrophobic sequence from type IV collagen resulted in a more regular suprastructure of extended fibers that sometimes showed supercoiling and branching features similar to those seen for type IV collagen in the basement membrane network. Several peptides, where central Pro-Hyp sequences were replaced by charged residues or a nine-residue hydrophobic region from type III collagen, lost the ability to self-associate under standard conditions. The inability to self-assemble likely results from loss of imino acids, and lack of an appropriate distribution of hydrophobic/electrostatic residues. The effect of replacement of a single Gly residue was also examined, as a model for collagen diseases such as osteogenesis imperfecta and Alport syndrome. Unexpectedly, the Gly to Ala replacement interfered with self-assembly of (Pro-Hyp-Gly)(10), while the peptide with a Gly to Ser substitution self-associated to form a fibrillar structure.     

Template-assembled triple-helical peptide molecules: mimicry of collagen by molecular architecture and integrin-specific cell adhesion

Most proteins fold into specific structures to exert their biological functions, and therefore the creation of protein-like molecular architecture is a fundamental prerequisite toward realizing a novel biologically active protein-like biomaterial. To do this with an artificial collagen, we have engineered a peptide template characterized by its collagen-like primary structure composed of Gly-Phe-Gly-Glu-Glu-Gly sequence to assemble (Pro-Hyp-Gly)n (n = 3 and 5) into triple-helical conformations that resemble the native structure of collagen. The peptide template has three carboxyl groups connected to the N-termini of three collagen peptides. The coupling was accomplished by a simple and direct branching protocol without complex strategies. A series of biophysical studies, including melting curve analyses and CD and NMR spectroscopy, demonstrated the presence of stable triple-helical conformation in the template-assembled (Pro-Hyp-Gly)3 and (Pro-Hyp-Gly)5 solution. Conversely, nontemplated peptides showed no evidence of assembly of triple-helical structure. A cell binding sequence (Gly-Phe-Hyp-Gly-Glu-Arg) derived from the collagen alpha1(I) chain was incorporated to mimic the integrin-specific cell adhesion of collagen. Cell adhesion and inhibition assays and immunofluorescence staining revealed a correlation of triple-helical conformation with cellular recognition of collagen mimetics in an integrin-specific way. This study offers a robust strategy for engineering native-like peptide-based biomaterials, fully composed of only amino acids, by maintaining protein conformation integrity and biological activity.     

Interruptions in the collagen repeating tripeptide pattern can promote supramolecular association

The standard collagen triple‐helix requires a perfect (Gly‐Xaa‐Yaa)_n sequence, yet all nonfibrillar collagens contain interruptions in this tripeptide repeating pattern. Defining the structural consequences of disruptions in the sequence pattern may shed light on the biological role of sequence interruptions, which have been suggested to play a role in molecular flexibility, collagen degradation, and ligand binding. Previous studies on model peptides with 1‐ and 4‐residue interruptions showed a localized perturbation within the triple‐helix, and this work is extended to introduce natural collagen interruptions up to nine residue in length within a fixed (Gly‐Pro‐Hyp)_n peptide context. All peptides in this set show decreases in triple‐helix content and stability, with greater conformational perturbations for the interruptions longer than five residue. The most stable and least perturbed structure is seen for the 5‐residue interruption peptide, whose sequence corresponds to a Gly to Ala missense mutation, such as those leading to collagen genetic diseases. The triple‐helix peptides containing 8‐ and 9‐residue interruptions exhibit a strong propensity for self‐association to fibrous structures. In addition, a small peptide modeling only the 9‐residue sequence within the interruption aggregates to form amyloid‐like fibrils with antiparallel β‐sheet structure. The 8‐ and 9‐residue interruption sequences studied here are predicted to have significant cross‐β aggregation potential, and a similar propensity is reported for ～10% of other naturally occurring interruptions. The presence of amyloidogenic sequences within or between triple‐helix domains may play a role in molecular association to normal tissue structures and could participate in observed interactions between collagen and amyloid.     

Common interruptions in the repeating tripeptide sequence of non-fibrillar collagens: sequence analysis and structural studies on triple-helix peptide models

Interruptions in the repeating (Gly-X1-X2)_n amino acid sequence pattern are found in the triple-helix domains of all non-fibrillar collagens, and perturbations to the triple-helix at such sites are likely to play a role in collagen higher-order structure and function. This study defines the sequence features and structural consequences of the most common interruption, where one residue is missing from the tripeptide pattern, Gly-X1-X2-Gly-AA₁-Gly-X1-X2, designated G1G interruptions. Residues found within G1G interruptions are predominantly hydrophobic (70%), followed by a significant amount of charged residues (16%), and the Gly-X1-X2 triplets flanking the interruption are atypical. Studies on peptide models indicate the degree of destabilization is much greater when Pro is in the interruption, GP, than when hydrophobic residues (GF, GY) are present, and a rigid Gly-Pro-Hyp tripeptide adjacent to the interruption leads to greater destabilization than a flexible Gly-Ala-Ala sequence. Modeling based on NMR data indicates the Phe residue within a GF interruption is located on the outside of the triple helix. The G1G interruptions resemble a previously studied collagen interruption GPOGAAVMGPO, designated G4G-type, in that both are destabilizing, but allow continuation of rod-like triple helices and maintenance of the single residue stagger throughout the imperfection, with a loss of axial register of the superhelix on both sides. Both kinds of interruptions result in a highly localized perturbation in hydrogen bonding and dihedral angles, but the hydrophobic residue of a G4G interruption packs near the central axis of the superhelix, while the hydrophobic residue of a G1G interruption is located on the triple-helix surface. The different structural consequences of G1G and G4G interruptions in the repeating tripeptide sequence pattern suggest a physical basis for their differential susceptibility to matrix metalloproteinases in type X collagen.     

Unique side chain conformation of a Leu residue in a triple-helical structure

Single crystal structures of host-guest peptides, (Pro-Hyp-Gly)(4)-Leu-Hyp-Gly-(Pro-Hyp-Gly)(5) (LOG1) and (Pro-Hyp-Gly)(4)- (Leu-Hyp-Gly)(2)-(Pro-Hyp-Gly)(4) (LOG2), have been determined at 1.6 A and 1.4 A resolution, respectively. In these crystals, the side chain conformations of the Leu residues were (+)gauche-trans. This conformational preference for the Leu side chain in the Leu-Hyp-Gly sequence was explained by stereochemical considerations together with statistical analysis of Protein Data Bank data. In the (+)gauche-trans conformation, the Leu side chain can protrude along the radial direction of the rod-like triple-helical molecule. One strong hydrophobic interaction of the Leu residue was observed between adjacent molecules in the LOG2 crystal. Because the Leu-Hyp-Gly sequence is one of the most frequently occurring triplets in Type I collagen, this strong hydrophobic interaction can be expected in a fibrillar structure of native collagen. All the Leu residues in the asymmetric unit of the LOG1 and LOG2 crystals had water molecules hydrogen bonded to their NH. These water molecules made three additional hydrogen bonds with the Hyp OH, the Gly O[double bond]C, and a water molecule in the second hydration shell, forming a tetrahedral coordination of hydrogen bonds, which allows a smaller mean-square displacement factor of this water oxygen atom than those of other water molecules. These hydrogen bonds stabilize the molecular and packing structures by forming one O[double bond]C(Gly)---W---OH(Hyp) intra-molecular linkage and two NH(Leu)---W---O[double bond]C(Gly) and NH(Leu)---W---OH(Hyp) inter-molecular linkages.     

The hinge region of type VII collagen is intrinsically disordered

Type VII collagen (Col7) is important for skin integrity. As a major component of the anchoring fibrils, Col7 is essential for linking different skin layers together. The central collagenous domain of Col7 contains several interruptions of the collagen triple helix. The longest interruption is 39 amino acids long and referred to as the hinge region. The hinge region is highly conserved between species. This region was predicted to adopt a coiled coil structure and to serve as the trimerization domain of Col7.To gain insight into the potential function of the hinge region we investigated a heterologous expressed peptide by CD and NMR spectroscopy. CD spectroscopy implies that the hinge region is intrinsically disordered. Resonance assignment was performed and allowed secondary structure analysis based on the chemical shift values. Seven amino acids in the N-terminal moiety show residual α-helical conformation. Subsequent investigation of temperature dependency of amide chemical shifts indicated participation in hydrogen bonding of amino acid residues in the C-terminal moiety of the hinge region. Therefore, the hinge region does not form a coiled coil structure under the employed experimental conditions. The intrinsic disorder of the hinge region might be desired for flexibility to serve as a “hinge” or the hinge region is an important interaction site as typically observed for intrinsically disordered proteins.     

Folding delay and structural perturbations caused by type IV collagen natural interruptions and nearby Gly missense mutations

The standard collagen triple helix requires Gly as every third residue in the amino acid sequence, yet all nonfibrillar collagens contain sites where this repeating pattern is interrupted. To explore the effects of such natural interruptions on the triple helix, a 4- or 15-residue sequence from human basement membrane type IV collagen was introduced between (Gly-Xaa-Yaa)(n) domains within a recombinant bacterial collagen. The interruptions had little effect on melting temperature, consistent with the high thermal stability reported for nonfibrillar collagens. Although the 4-residue interruption cannot be accommodated within a standard triple helix, trypsin and thermolysin resistance indicated a tightly packed structure. Central residues of the 15-residue interruption were protease-susceptible, whereas residues near the (Gly-Xaa-Yaa)(n) boundary were resistant, supporting a transition from an alternate conformation to a well packed triple helix. Both interruptions led to a delay in triple-helix folding, with the 15-residue interruption causing slower folding than the 4-residue interruption. These results suggest that propagation through interruptions represents a slow folding step. To clarify the relation between natural interruptions and pathological mutations, a Gly to Ser missense mutation was placed three triplets away from the 4-residue interruption. As a result of this mutation, the 4-residue interruption and nearby triple helix became susceptible to protease digestion, and an additional folding delay was observed. Because Gly missense mutations that cause disease are often located near natural interruptions, structural and folding perturbations arising from such proximity could be a factor in collagen genetic diseases.     

CD and NMR investigation of collagen peptides mimicking a pathological Gly–Ser mutation and a natural interruption in a similar highly charged sequence context

Even a single Gly substitution in the triple helix domain of collagen leads to pathological conditions while natural interruptions are suggested to play important functional roles. Two peptides—one mimicking a pathological Gly–Ser substitution (ERSEQ) and the other one modeling a similar natural interruption sequence (DRSER)—are designed to facilitate the comparison for elucidating the molecular basis of their different biological roles. CD and NMR investigation of peptide ERSEQ indicates a reduction of the thermal stability and disruption of hydrogen bonding at the Ser mutation site, providing a structural basis of the OI disease resulting from the Gly–Ser mutation in the highly charged RGE environment. Both CD and NMR real‐time folding results indicate that peptide ERSEQ displays a comparatively slower folding rate than peptide DRSER, suggesting that the Gly–Ser mutation may lead to a larger interference in folding than the natural interruption in a similar RSE context. Our studies suggest that unlike the rigid GPO environment, the abundant R(K)GE(D) motif may provide a more flexible sequence environment that better accommodates mutations as well as interruptions, while the electrostatic interactions contribute to its stability. These results shed insight into the molecular features of the highly charged motif and may aid the design of collagen biomimetic peptides containing important biological sites.     

Molecular dynamic simulation studies on the effect of one residue chain staggering on the structure and stability of heterotrimeric collagen-like peptides with interruption

A systematic molecular dynamics (MD) simulation has been carried out on collagen-like peptides with different combinations of interruptions in the Gly-X(AA) -Y(AA) repeats. Although experimental studies have been carried out to elucidate the structural consequences of homotrimeric collagen-like peptides, this is the first report on the structural effect on the heterotrimeric models with G4G and G1G breaks present simultaneously in the constituent chains with difference in one residue chain staggering. The results reveal that the axial registry of the interrupted region changes significantly from that of conventional triple helical peptide without interruption. Further, results from MD simulations show the formation of a kink in the interrupted region of the triple-helical peptides. The conformational analysis reveals that the interruption in the Gly-X(AA) -Y(AA) pattern in these peptides induces β-strand conformation in triple helical peptides. The conventional hydrogen bonds in the interrupted triad are affected and new nonconventional H-bonds are formed in the triple helical structure, and as a result interrupted region becomes locally fragile. MM-PBSA calculations on the different systems clearly suggest that the binding affinity varies marginally due to one residue staggering. However, it is found from the structural parameters that hydrogen-bonding pattern differs significantly due to the difference in the staggering of chains.     

The specific recognition of a cell binding sequence derived from type I collagen by Hep3B and L929 cells

In this study, the affinity of two different cell types toward a specific cell binding sequence (Gly-Phe-Hyp-Gly-Glu-Arg or GFOGER) derived from type I collagen using peptide template (PT)-assembled collagen peptides of different triple helicity as a model for natural collagen is examined. A series of biophysical studies, including melting curve analysis and circular dichroism spectroscopy, demonstrated the presence of stable triple-helical conformation in the PT-assembled (GPO)3-GFOGER-(GPO)3, (GPO)-GFOGER-(GPO), and (Pro-Hyp-Gly)5 solution. Conversely, non-templated peptides, except (GPO)3-GFOGER-(GPO)3, showed no evidence of assembly into triple-helical structure. Biological assays, including cell adhesion, competitive inhibition, and immunofluorescence staining, revealed a correlation of triple-helical conformation with the cellular recognition of GFOGER in an integrin-specific manner. The triple helix was shown to be important, but not crucial for cell adhesion to native collagen. Hep3B and L929 cells displayed significant differences in the recognition of GFOGER, mainly because of the differences in their expression of specific integrin receptors for collagen. For example, PT-assembled (GPO)3-GFOGER-(GPO)3 was shown to perform comparably to collagen for L929, but not Hep3B, cell adhesion. The result showed that a specific cell binding motif may not fully mimic the extracellular matrix (ECM) microenvironment, suggesting the need to use a combination of two or more cell binding sequences for targeting a wide range of integrin receptors expressed by a specific cell type to better mimic the ECM.     

Conformational features of a natural break in the type IV collagen Gly-X-Y repeat

Fibrillar collagens have an absolute requirement for Gly as every 3rd residue, whereas breaks in the Gly-X-Y repeating pattern are found normally in the triple helix domains of non-fibrillar collagens, such as type IV collagen in basement membranes. In this study, a model 30-mer peptide is designed to include the interruption GPOGAAVMGPOGPO found in the alpha5 chain of type IV collagen. The GAAVM peptide forms a stable triple helix, with Tm= 29 degrees C. When compared with a control peptide with Gly as every 3rd residue, the GAAVM peptide has a marked decrease in the 225 nm maximum of its CD spectrum and a 10 degrees C drop in stability. A 50% decrease in calorimetric enthalpy is observed, which may result from disruption of ordered water structure anchored by regularly placed backbone carbonyls. NMR studies on specific 15N-labeled residues within the GAAVM peptide indicate a normal triple helical structure for Gly-Pro-Hyp residues flanking the break. The sequence within the break is not disordered but shows altered hydrogen exchange rates and an abnormal Val chemical shift. It was previously reported that a peptide designed to model a similar kind of interruption in the peptide (Pro-Hyp-Gly)10, (GPOGPOPOGPO), is unable to form a stable triple helix, and replacement of GAA by GPO or VM by PO within the GAAVM break decreases the stability. Thus, rigid imino acids are unfavorable within a break, despite their favorable stabilization of the triple helix itself. These results suggest some non-random structure typical of this category of breaks in the Gly-X-Y repeat of the triple helix.     

Asymmetry in the triple helix of collagen-like heterotrimers confirms that external bonds stabilize collagen structure

Heating and subsequent cooling mixtures of (Pro-Pro-Gly)(10) and (Pro-Hyp-Gly)(10) peptides leads to formation of model heterotrimeric collagen helices that can be isolated by HPLC. These heterotrimeric collagen peptide helices are shown to be fundamentally unstable as denaturing then renaturing experiments result in heterotrimeric/homotrimeric mixtures.As the proportion of hydroxyproline-containing chains in the trimers increases, differential scanning calorimetry shows that the helix melting temperatures and denaturation enthalpies increasing non-linearly. Three types of Rich-Crick hydrogen bonds observed by NMR allow modelling of heterotrimeric structures based on published homotrimeric X-ray data. This revealed a small axial movement of (Pro-Hyp-Gly)(10) chains towards the C-terminal of the helix, demonstrating heterotrimeric asymmetry.     

A statistically derived parameterization for the collagen triple-helix

The triple-helix is a unique secondary structural motif found primarily within the collagens. In collagen, it is a homo- or hetero-tripeptide with a repeating primary sequence of (Gly-X-Y)(n), displaying characteristic peptide backbone dihedral angles. Studies of bulk collagen fibrils indicate that the triple-helix must be a highly repetitive secondary structure, with very specific constraints. Primary sequence analysis shows that most collagen molecules are primarily triple-helical; however, no high-resolution structure of any entire protein is yet available. Given the drastic morphological differences in self-assembled collagen structures with subtle changes in assembly conditions, a detailed knowledge of the relative locations of charged and sterically bulky residues in collagen is desirable. Its repetitive primary sequence and highly conserved secondary structure make collagen, and the triple-helix in general, an ideal candidate for a general parameterization for prediction of residue locations and for the use of a helical wheel in the prediction of residue orientation. Herein, a statistical analysis of the currently available high-resolution X-ray crystal structures of model triple-helical peptides is performed to produce an experimentally based parameter set for predicting peptide backbone and C(beta) atom locations for the triple-helix. Unlike existing homology models, this allows easy prediction of an entire triple-helix structure based on all existing high-resolution triple-helix structures, rather than only on a single structure or on idealized parameters. Furthermore, regional differences based on the helical propensity of residues may be readily incorporated. The parameter set is validated in terms of the predicted bond lengths, backbone dihedral angles, and interchain hydrogen bonding.     

Do collagenases unwind triple‐helical collagen before peptide bond hydrolysis? Reinterpreting experimental observations with mathematical models

It has been postulated that triple-helical collagen is actively unwound by collagenases before peptide bond hydrolysis--a supposition that explains the small catalytic rate constant associated with collagenolysis. We propose an alternate model of collagen degradation that does not require active unwinding by collagenases, but instead suggests that the regions of collagen near the collagenase cleavage site can adopt either a native triple-helical or a partially unfolded conformation. In this model, collagenases preferentially bind to and stabilize partially unfolded conformers before cleaving the scissile bond. Existing experimental observations (which were previously taken to support active unwinding models) are reinterpreted using corroborative evidence from numerical simulations and found to be consistent with this framework. These data support the notion that collagen, like all other biological heteropolymers, undergoes thermal fluctuations that cause it to sample distinct structures in the neighborhood of the native state, and collagenolysis occurs when collagenases recognize the appropriate unwound conformers.     

Contribution of tertiary amides to the conformational stability of collagen triple helices

The collagen triple helix is composed of three polypeptide strands, each with a sequence of repeating (Xaa-Yaa-Gly) triplets. In these triplets, Xaa and Yaa are often tertiary amides: L-proline (Pro) and 4(R)-hydroxy-L-proline (Hyp). To determine the contribution of tertiary amides to triple-helical stability, Pro and Hyp were replaced in synthetic collagen mimics with a non-natural acyclic tertiary amide: N-methyl-L-alanine (meAla). Replacing a Pro or Hyp residue with meAla decreases triple-helical stability. Ramachandran analysis indicates that meAla residues prefer to adopt straight phi and psi angles that are dissimilar from those of the Pro and Hyp residues in the collagen triple helix. Replacement with meAla decreases triple-helical stability more than does replacement with Ala. All of the peptide bonds in triple-helical collagen are in the trans conformation. Although an Ala residue greatly prefers the trans conformation, a meAla residue exists as a nearly equimolar mixture of trans and cis conformers. These findings indicate that the favorable contribution of Pro and Hyp to the conformational stability of collagen triple helices arises from factors other than their being tertiary amides.     

Mapping Hsp47 binding site(s) using CNBr peptides derived from type I and type II collagen

As a crucial molecular chaperone in collagen biosynthesis, Hsp47 interacts with the nascent form as well as the mature triple-helical form of procollagen. The location(s) of Hsp47 binding sites on the collagen molecule are, as yet, unknown. We have examined the substrate specificity of Hsp47 in vitro using well-characterized CNBr peptide fragments of type I and type II collagen along with radiolabeled, recombinant Hsp47. Interaction of these peptides with Hsp47 bound to collagen-coated microtiter wells showed several binding sites for Hsp47 along the length of the alpha1 and alpha2 chains of type I collagen and the alpha1 chain of type II collagen, with the N-terminal regions showing the strongest affinities. The latter observation was also supported by the results of a ligand-blot assay. Except for two peptides in the alpha2(I) chain, peptides that showed substantial binding to Hsp47 did so in their triple-helical and not random-coil form. Unlike earlier studies that used peptide models for collagen, the results obtained here on fragments of type I and type II collagen identify, for the first time, binding of Hsp47 to specific regions of the collagen molecule. They also point to additional structural requirements for Hsp47 binding besides the known preference for third-position Arg residues and the triple-helical conformation.