Exoquence DNA sequencing.

We have developed a strategy for DNA sequencing based on exonuclease III digestion followed by double strand specific endonuclease digestion and direct dideoxynucleotide sequencing reaction. This strategy eliminates the need for subcloning, oligonucleotide primers, and prior knowledge of the DNA to be sequenced. All template and primer duplexes needed for sequencing a complete insert can be prepared in one day from uncharacterized starting DNA. Sequence information can be obtained from different regions of the DNA simultaneously. The method uses double-stranded DNA to generate single-stranded template and primer, and thus produces high quality sequence results. Commercially available dideoxy-sequencing kits are well suited for this method. The strategy should be applicable for both automatic and routine laboratory DNA sequencing.     

Gene-boosted assembly of a novel bacterial genome from very short reads

Recent improvements in technology have made DNA sequencing dramatically faster and more efficient than ever before. The new technologies produce highly accurate sequences, but one drawback is that the most efficient technology produces the shortest read lengths. Short-read sequencing has been applied successfully to resequence the human genome and those of other species but not to whole-genome sequencing of novel organisms. Here we describe the sequencing and assembly of a novel clinical isolate of Pseudomonas aeruginosa, strain PAb1, using very short read technology. From 8,627,900 reads, each 33 nucleotides in length, we assembled the genome into one scaffold of 76 ordered contiguous sequences containing 6,290,005 nucleotides, including one contig spanning 512,638 nucleotides, plus an additional 436 unordered contigs containing 416,897 nucleotides. Our method includes a novel gene-boosting algorithm that uses amino acid sequences from predicted proteins to build a better assembly. This study demonstrates the feasibility of very short read sequencing for the sequencing of bacterial genomes, particularly those for which a related species has been sequenced previously, and expands the potential application of this new technology to most known prokaryotic species.     

Multiple hybridization-extension sequencing (MHES) on microarray

Sequencing-by-synthesis (SBS) by fluorescein-labelled nucleotide incorporating into a target DNA template has been greatly concerned on microarray. The extended fluorophore-base must be required to be quenched prior to sequencing the next one. However, the low quenching efficiency has been an obstacle in length-read. Here, we present a new sequencing strategy, multiple hybridization-extension sequencing (MHES), to resolve the above problem. First, the sequencing primers hybridize to the ssDNA template immobilized on microarray. The first 3-5 bases next to the primer's end are sequenced by SBS of Cy5-dNTP. The extended primers are rapidly removed by lambda DNA exonuclease. Then, the same primers hybridize to the same ssDNA templates again. The sequenced bases are polished by natural dNTP. The other 3-5 bases next to the polished primer's end are sequenced. According to this principle, the unknown sequences of a target DNA could be sequenced after primers' hybridization-extension multiple times. Although the fluorescein-labelled nucleotides are also needed, it is unnecessary to quench the fluorophore-bases in the process of sequencing. It has been successfully demonstrated that 10 bp fragment from synthetic template and 10 bp fragment from DTBNP1 gene were accurately sequenced. The new method has a great potential in read-length and high-throughput sequencing on microarray.     

Statistical analysis of DNA sequencing data (1): accuracy test of DNA data by partial re-sequencing.

To qualify DNA data, we have developed a statistical method of deciding whether the DNA data has an acceptable accuracy in sequencing process. The method is to test the probability of sequencing errors, based on partial re-sequencing. The method was successfully applied to a yeast mitochondrial DNA which is previously sequenced (1). The analysis indicates that the entire sequence is very accurate although we found one base change error on the ND1 gene sequence data by a partial re-sampling. This method is applicable to any DNA data.     

Direct PCR sequencing of dystrophin polymorphic CACA alleles after purification to remove shadow bands.

A method is described that allows the sequencing of polymerase chain reaction (PCR) products containing CACA repeats. The method was tested using a DNA polymorphism that exists at the 3' end of the dystrophin gene. This polymorphism consists of a variation in the length of a CACA dinucleotide repeat. Four alleles from a total of 16 individuals were sequenced at this locus after the DNA sequence had been amplified by the PCR. Five examples of each of the common alleles were sequenced. For each allele all five sequences were the same. The only example of a rare allele was also sequenced. The PCR products of DNA sequences containing dinucleotide repeats consist of a number of bands differing by 2 bp below the most intense main band. Previously, direct sequencing of the PCR products lead to ambiguities and smearing at and above the CACA repeat. In this paper, the main PCR band was cut out of a sequencing gel and directly sequenced to give a clear DNA sequence. Our results indicate that for a particular allele, all individuals had exactly the same DNA sequence. This implies that with the appropriate choice of oligonucleotide primers, polymorphisms could be detected without electrophoresis.     

Direct determination of DNA nucleotide sequences: structure of a fragment of bacteriophage phiX172 DNA

Methods for the direct determination of nucleotide sequences in DNA have been developed and used to determine the complete primary structure of a fragment of bacteriophage φX174 DNA which is 48 residues in length. This fragment was liberated from φX DNA by digestion at low temperature and high ionic strength with the T4 phage-induced endonuclease IV. The fragment was redigested with endonuclease IV under vigorous conditions and the products fractionated two-dimensionally providing a characteristic endonuclease IV “fingerprint” of the fragment. The Burton (Burton &; Petersen, 1960) depurination reaction was used to characterize the redigestion products and identify the pyrimidine residues at their 5′ and 3′ termini. These oligonucleotide products were then fully sequenced by partial exonuclease digestion with spleen and snake venom phosphodiesterase and analysis of the fractionated digests by base composition, depurination, and 5′ end-group analysis using exonuclease I. Rules for the interpretation of two-dimensional fingerprints of partial exonuclease digests, which rapidly provide sequence information by simple inspection, were also deduced. To derive the complete structure of the fragment, the fully sequenced oligonucleotides were ordered by characterizing large, overlapping, partial endonuclease IV digestion products by means of the depurination reaction. The sequencing methods described are general and may be used for the direct determination of the primary structures of other fragments of DNA.     

利用Taq DNA聚合酶对PCR产物直接进行顺序分析

Taq DNA聚合酶具有反应速度快、温度作用范围广及良好的续进性等特点,可视为一种理想的DNA顺序分析酶。本文首先对非对称性PCR扩增过程中单、双链DNA产物的积累情况进行了分析,然后采用标记延伸二步法,对Taq DNA聚合酶的性质及影响因素进行分析。为进一步改进Taq DNA聚合酶测序的方法,本反应建立了“Klenow-型”的直接掺入标记同位素测序法,即在反应液中加入与标记核苷酸相应的一定浓度的冷dNTP。此法不但解决了二步法中引物后部分DNA顺序无法读出的缺点,而且简化了反应步骤,亦能得到令人满意的顺序分析结果,每次可读出至少400碱基的序列。     

A High Through-put Procedure for Capturing Microsatellites from Complex Plant Genomes

A method is outlined for large-scale isolation and characterization of microsatellite sequences from complex plant genomes. The method presented here differs from the previously published procedures in the use of randomly sheared (nebulized) genomic DNA for adapter-ligation, rigorous removal of biotinylated oligos, and high-density colony blots for constructing enriched libraries. Using this method we have constructed cotton microsatellite enriched libraries with over 20% (high stringency screening) or 75% (by random sequencing). Thus far we have identified and sequenced over 500 cotton microsatellites using this procedure. The procedure can be used to generate enriched SSR libraries from genomic DNA in about one week. High throughput screening and automated DNA sequencing can be accomplished in less than one month.     

Direct solid phase sequencing of genomic and plasmid DNA using magnetic beads as solid support.

Approaches to direct solid phase sequencing of genomic and plasmid DNA have been developed using magnetic beads, coated with streptavidin, as solid support. The DNA is immobilized through selective incorporation of biotin into one of the strands. A single stranded template, suitable for sequencing, is obtained through strand-specific elution. Using this concept, in vitro amplified plasmid DNA and chromosomal DNA were sequenced directly from single colonies. The solid phase approach ensures that the amplification and the sequencing reactions can be performed under optimal conditions. The system was found to be suitable for sequencing using both isotope- and fluorescent-labelled primers.     

Dideoxy sequencing of double-stranded DNA from poly(A)-extended 3'-ends

A simple method has been developed for sequencing double-stranded DNA by the chain termination method. The DNA to be sequenced is cut with a restriction enzyme that leaves a 3'-overhang which is extended by terminal deoxynucleotidyltransferase with limiting amounts of dATP. The sequencing reaction is then primed with an oligo(dT) primer which has a base pair "anchor" complementary to the overhang generated by the restriction enzyme. The method presented here eliminates the need for subcloning of the DNA or sequencing by chemical modification. Furthermore, sequences of more than 300 nucleotides are obtained from any 3'-overhanging restriction end.     

Direct sequencing of terminal regions of genomic P1 clones: A general strategy for the design of sequence-tagged site markers

A method for the preparation of P1 DNA is presented, which allows the direct sequencing of ends of inserts in genomic P1 clones using the Applied Biosystems 373A DNA Sequencer and the Dye Terminator sequencing methodology. We surveyed several common methods of DNA preparation including alkaline lysis, Triton-lysozyme lysis, CsCl density-gradient purification, and a commercial column matrix DNA purification kit manufactured by Qiagen. We found that a modified alkaline lysis preparation of P1 DNA was most successful for generating P1 DNA that could be sequenced directly. We also noted that the host bacterial strain from which the P1 DNA was purified dramatically affected the quality of sequencing templates. The bacterial strains NS3145 and NS3529, in which the Drosophila melanogaster and human P1 genomic libraries are harbored, routinely yielded poor-quality sequencing templates. However, the bacterial strain DH10B routinely yielded P1 DNA that was sequenced successfully. A bacterial mating scheme is presented that exploits γδ transposition events to allow the transfer of P1 clones from the library host strain to DH10B. Using either an SP6 or a T7 primer, an average of 350 base pairs of DNA sequence was obtained with an uncalled base frequency of ∼2%. About 4% of P1 end sequences generated corresponded to unique Drosophila loci present in the Genbank database. These single-pass DNA sequences were used to design sequence-tagged site markers for physical mapping studies in both humans and Drosophila.     

DNA sequence analysis by MALDI mass spectrometry.

Conventional DNA sequencing is based on gel electrophoretic separation of the sequencing products. Gel casting and electrophoresis are the time limiting steps, and the gel separation is occasionally imperfect due to aberrant mobility of certain fragments, leading to erroneous sequence determination. Furthermore, illegitimately terminated products frequently cannot be distinguished from correctly terminated ones, a phenomenon that also obscures data interpretation. In the present work the use of MALDI mass spectrometry for sequencing of DNA amplified from clinical samples is implemented. The unambiguous and fast identification of deletions and substitutions in DNA amplified from heterozygous carriers realistically suggest MALDI mass spectrometry as a future alternative to conventional sequencing procedures for high throughput screening for mutations. Unique features of the method are demonstrated by sequencing a DNA fragment that could not be sequenced conventionally because of gel electrophoretic band compression and the presence of multiple non-specific termination products. Taking advantage of the accurate mass information provided by MALDI mass spectrometry, the sequence was deduced, and the nature of the non-specific termination could be determined. The method described here increases the fidelity in DNA sequencing, is fast, compatible with standard DNA sequencing procedures, and amenable to automation.     

Strategy and methods for directly sequencing cosmid clones

The primer-directed enzymatic sequencing method for sequencing double-stranded DNA templates has made possible the development of new strategies for directly sequencing large DNA molecules. Toward this goal, we have developed a strategy and the necessary techniques to obtain the complete sequence of cosmid clones (double-stranded DNA molecules in the size range of 50 kb). Our present strategy uses the chemical sequencing method to obtain sequence initiation points internal to a cosmid insert and the primer-directed enzymatic DNA sequencing method to extend these sequence contigs. As part of this development we added a nucleotide "chase" solution to the standard T7 sequencing protocol and included the use of both [alpha-32P]-dATP and -dCTP for labeling. With these modifications our double-stranded cosmid DNA sequencing reactions routinely extend well beyond 1000 bp, and film exposure times are kept to a minimum (24 to 48 h). We can routinely separate sequenced DNA fragments, using a 1-m gel system, which can be accurately read (with less than 0.5% error) to distances of 800 bp or more, from the oligomer primer. The strategy and procedures presented here allow the complete sequence of a cosmid clone to be obtained without subcloning.     

DNA sequencing by denaturation: principle and thermodynamic simulations

We describe a new DNA sequencing method called sequencing by denaturation (SBD). A Sanger dideoxy sequencing reaction is performed on the templates on a solid surface to generate a ladder of DNA fragments randomly terminated by fluorescently labeled dideoxyribonucleotides. The labeled DNA fragments are sequentially denatured from the templates and the process is monitored by measuring the change in fluorescence intensities from the surface. By analyzing the denaturation profiles, the base sequence of the template can be determined. Using thermodynamic principles, we simulated the denaturation profiles of a series of oligonucleotides ranging from 12 to 32 bases and developed a base-calling algorithm to decode the sequences. These simulations demonstrate that DNA molecules up to 20 bases can be sequenced by SBD. Experimental measurements of the melting profiles of DNA fragments in solution confirm that DNA sequences can be determined by SBD. The potential limitations and advantages of SBD are discussed. With SBD, millions of sequencing reactions can be performed on a small area on a surface in parallel with a very small amount of sequencing reagents. Therefore, DNA sequencing by SBD could potentially result in a significant increase in speed and reduction in cost in large-scale genome resequencing.     

Direct sequencing of tobacco chloroplast genome by the polymerase chain reaction

We have developed a polymerase chain reaction (PCR) method for sequencing of tobacco chloroplast genome. In a mixture containing chloroplast DNA, 5-end-labeled oligonucleotide primer, Taq DNA polymerase and reaction buffer, we were able to sequence a segment of chloroplast 16S rRNA gene. The results showed that the 750 bp of DNA sequenced were identical to the sequence reported, indicating that direct sequencing method that we have developed is useful for the sequencing of chloroplast genome. To analyze the chloroplast genome more rapidly in those in vitro grown plantlets, we also developed a simple method which is applicable for the amplifications and sequencing of chloroplast 16S rRNA fragment from either 0.15 g of tobacco leaf or stem tissue. The readable sequences obtained from the presented methods were consistent with the published sequence.     

Strategies for automated sequencing of human mitochondrial DNA directly from PCR products.

A rapid, robust and sensitive method has been developed for the amplification and direct sequencing of human mitochondrial DNA. A 403-bp hypervariable segment was amplified by two successive rounds of nested PCR. This was then sequenced by the dideoxy chain termination method using dye-labeled universal sequencing primers in conjunction with an automated DNA sequencer. This paper describes the assessment of four different strategies for this amplification and sequencing process. Optimal results were obtained by immobilizing the biotinylated PCR product on Dynabeads followed by solid-phase sequencing with Sequenase. Degraded samples and those containing trace amounts of DNA such as extracts from hair shafts can be analyzed by this method.     

Solid-phase methods for sequencing of nucleic acids I. Simultaneous sequencing of different oligodeoxyribonucleotides using a new, mechanically stable anion-exchange paper.

A solid-phase method for simultaneous sequencing of large numbers of oligodeoxyribonucleotides has been developed using a new, mechanically stable anion-exchange paper. The excellent mechanical properties of the polymer allow the processing of several paper segments in one reaction vessel or to carry out all necessary operations on a larger area of the paper. In addition, DNA material can be chemically eluted from the new carrier during the piperidine reaction, thus avoiding salt elution of DNA and subsequent ethanol precipitation steps - a prerequisite for sequencing oligonucleotides. The approach involves 7 operations including: i) immobilization; ii) washing; iii) modification; iv) washing; v) sorting of the papers; vi) piperidine reaction and chemical elution and vii) lyophilization. All steps can be carried out in 4 to 5 hours independently of the number of oligonucleotides to be sequenced. It is also possible to sequence small oligonucleotides with 3 to 4 base pairs. The method can be fully automated.     

Palaeogenomics

In many ways, palaeogenomics began when the first ancient DNA sequence was reported. This first sequence was derived from a stuffed museum specimen of the quagga, an extinct mammal related to the zebra. Unspecified and unselected DNA was extracted from the quagga specimen, cloned into a bacterial library, and then sequenced. It took another 17 years and the development of PCR before two independent groups successfully sequenced the complete mitochondrial genomes from several extinct moa species. Only 4 years later, using the original approach of cloning nonspecific ancient DNA extract and shotgun sequencing, the first ancient nuclear DNA sequences were determined, this time from the extinct cave bear. Since these early successes, palaeogenomics has rapidly expanded, because of both technological development and increasing interest in ancient DNA research. New methods, developed since the cave bear sequence was reported, have produced nuclear DNA on a megabase scale from two extinct species, the mammoth and the Neanderthal, our closest relative. For both species, low-coverage genome-sequencing projects have been proposed. It is likely that these will be successful, given the rapid technical development in sequencing techniques. This review carefully examines both the promise and the current limitations of palaeogenomic analyses for both mitochondrial and nuclear DNA.     

BAC trimming: minimizing clone overlaps

Bacterial vectors containing large inserts of genomic DNA are now the standard substrates for large-scale genomic sequencing. Long overlaps between some clones lead to considerable redundant effort. A method for deleting defined regions from bacterial artificial chromosome (BAC) inserts, using homologous recombination, was applied to minimize the overlap between successive BAC clones. This procedure, called trimming, was carried out in the recA(-) BAC host. We have precisely deleted up to 70 kb of DNA from BACs that were to be sequenced. This method requires minimal prior characterization of the clones: collections of BAC end sequences or STS-based maps will accelerate the process. BAC trimming will be useful in both small and large genome sequencing projects and will be of particular utility for gap closure in finishing phases.     

粘虫核型多角体病毒919bp片段的PCR双链直接序列测定

本文发展了ＰＣＲ克隆和亚克隆技术制备ＤＮＡ测序模板。首先,我们用ｐＵＣ／Ｍ１３系列质粒的通用正反向引物ＰＣＲ扩增出质粒ｐＢｌｕｅｓｃｒｉｐｔＫＳＤＮＡ的多克隆位点及其侧翼序列,用ＥｃｏＲＶ和ＸｈｏＩ消化成为左右两个引物多克隆臂,与粘虫核型多角体病毒（ＬｓＮＰＶ）的ＥｃｏＲＶ和ＸｈｏＩ约４００ｂｐ和５００ｂｐ片段分别连接,经ＰＣＲ扩增,得到两端具有上述正反向引物结合位点的测序模板,用ｄｄＮＴＰ链终止法／ＰＣＲ扩增／银染色,从片段两端测定了全部９１９ｂｐ序列,这种ｄｄＮＴＰ／ＰＣＲ／银染测序法简化了操作,大大缩短了测序模板的制备时间,易于实现自动化操作。