Loop‐mediated isothermal amplification method for rapid detection of Vibrio alginolyticus,the causative agent of vibriosis in mariculture fish

Aims: The purpose of this study was to develop a loop‐mediated isothermal amplification (LAMP) method for the rapid, sensitive and simple detection of Vibrio alginolyticus in mariculture fish. Methods and Results: LAMP primers were designed by targeting the gyrB gene. With Bst DNA polymerase, the target DNA can be clearly amplified for 60 min at 64°C in a simple water bath. The detection sensitivity of the LAMP assay for the detection of V. alginolyticus is about 3·7 × 10² CFU ml^?1 (3·7 CFU per reaction). LAMP products could be judged with agar gel or naked eye after the addition of SYBR Green I. There were no cross‐reactions with other bacterial strains indicating a high specificity of the LAMP. The LAMP method was applied to detect V. alginolyticus‐infected fish tissues effectively. Conclusions: The LAMP established in this study is a simple, sensitive, specific, inexpensive and rapid protocol for the detection of V. alginolyticus. Significance and Impact of the Study: This LAMP method provides an important diagnostic tool for the detection of V. alginolyticus infection both in the laboratory and field.     

Identification by Subtractive Hybridization of Sequences Specific for Salmonella enterica Serovar Enteritidis

Salmonella enterica serovar Enteritidis, a major cause of food poisoning, can be transmitted to humans through intact chicken eggs when the contents have not been thoroughly cooked. Infection in chickens is asymptomatic; therefore, simple, sensitive, and specific detection methods are crucial for efforts to limit human exposure. Suppression subtractive hybridization was used to isolate DNA restriction fragments present in Salmonella serovar Enteritidis but absent in other bacteria found in poultry environments. Oligonucleotide primers to candidate regions were used in polymerase chain reactions to test 73 non-Enteritidis S. enterica isolates comprising 34 different serovars, including Dublin and Pullorum, two very close relatives of Enteritidis. A primer pair to one Salmonella difference fragment (termed Sdf I) clearly distinguished serovar Enteritidis from all other serovars tested, while two other primer pairs only identified a few non-Enteritidis strains. These primer pairs were also useful for the detection of a diverse collection of clinical and environmental Salmonella serovar Enteritidis isolates. In addition, five bacterial genera commonly found with Salmonella serovar Enteritidis were not detected. By treating total DNA with an exonuclease that degrades sheared chromosomal DNA but not intact circular plasmid DNA, it was shown that Sdf I is located on the chromosome. The Sdf I primers were used to screen a Salmonella serovar Enteritidis genomic library and a unique 4,060-bp region was defined. These results provide a basis for developing a rapid, sensitive, and highly specific detection system for Salmonella serovar Enteritidis and provide sequence information that may be relevant to the unique characteristics of this serovar.     

Amplification of rfbE and fliC Genes by Polymerase Chain Reaction for Identification and Detection of Salmonella Serovar Enteritidis,Dublin and Gallinarum-Pullorum

Polymerase chain reaction (PCR) primers for O9 antigen (rfbE) and phase 1 flagellin antigen (fliC) were designed for the rapid identification and detection of Salmonella serovar Enteritidis and Dublin. The rfbE primer pairs selectively amplified the rfbE region of group O9 Salmonella serovars. The fliC primer pairs amplified the DNAs of g,m and g,p-type flagellar antigen; Salmonella serovar Enteritidis, Dublin, and Essen. However, DNA from flagellar-negative Salmonella serovar Gallinarum-Pullorum was also amplified. The sensitivity of PCR primer pairs was 10 CFU/assay by boiled DNA preparation and 10² CFU/assay by proteinase K-treated DNA preparation.     

Sensitive and Rapid Detection of the Insect Pathogenic Fungus <Emphasis Type="Italic">Metarhizium anisopliae</Emphasis> var. <Emphasis Type="Italic">anisopliae</Emphasis> by Loop-mediated Isothermal Amplification

A set of six specific primers was designed by targeting intergenic spacer region (IGS) sequences. With Bst DNA polymerase, the products could be clearly amplified for 60 min at 62°C in a simple water bath. The sensitivity of the loop-mediated isothermal amplification (LAMP) for detecting Metarhizium anisopliae var. anisopliae was about 0.01 pg fungal DNA per reaction (equivalent to 27 conidia). LAMP products could be judged with agar gel or naked eye after addition of SYBR Green I. There were no cross reactions with other fungal isolates indicating high specificity of the LAMP. The LAMP could detect the presence of M. anisopliae var. anisopliae from soil. The detection limits for M. anisopliae var. anisopliae of LAMP reaction was 50 conidia per reaction in soil.     

Development of a loop‐mediated isothermal amplification assay for rapid and sensitive detection of Sporisorium scitamineum in sugarcane

Smut disease caused by Sporisorium scitamineum is one of the most destructive sugarcane diseases worldwide. The pathogen spreads primarily through infected sugarcane setts, and hence, the use of disease‐free planting materials is essential for preventing disease development in the field. In this study, a species‐specific loop‐mediated isothermal amplification (LAMP) assay was developed for rapid and accurate detection of S. scitamineum. Based on the differences in internal transcribed spacer (ITS) sequences of S. scitamineum, a set of four species‐specific primers, F3, B3, FIP and BIP, were designed by using a panel of fungal and bacterial species as controls. After optimization of the reaction conditions, the detection limit of LAMP assay was about 2 fg of the S. scitamineum genomic DNA in 25 µL reaction solution, 100‐fold lower than that of conventional polymerase chain reaction. The assay showed high specificity to discriminate all S. scitamineum isolates from nine other fungal and bacterial pathogens. The LAMP assay also detected smut infection from young sugarcane leaves with no visible smut‐disease symptoms. The findings from this study provide a simple, highly sensitive, rapid and reliable technique for early detection of S. scitamineum, which may be useful for sugarcane quarantine and production of smut‐free seedcanes. This is the first report of LAMP‐based assay for the detection of S. scitamineum in sugarcane.     

Rapid and simple detection of the invA gene in Salmonella spp. by isothermal target and probe amplification (iTPA)

Aims: Salmonella spp. are an important cause of food‐borne infections throughout world, and the availability of rapid and simple detection techniques is critical for the food industry. Salmonella enterica serovars Enteritidis and Typhimurium cause the majority of human gastroenteritis infections, and there are a reported 40 000 cases of salmonellosis in the United States each year. Methods and Results: A novel rapid and simple isothermal target and probe amplification (iTPA) assay that rapidly amplifies target DNA (Salmonella invA gene) using a FRET‐based signal probe in an isothermal environment was developed for detection Salmonella spp. in pre‐enriched food samples. The assay was able to specifically detect all of 10 Salmonella spp. strains without detecting 40 non‐Salmonella strains. The detection limit was 4 × 10¹ CFU per assay. The iTPA assay detected at an initial inoculum level of <10 CFU in the pre‐enriched food samples (egg yolk, chicken breast and peanut butter). Conclusions: This detection system requires only a water bath and a fluorometer and has great potential for use as a hand‐held device or point‐of‐care‐testing diagnostics. The iTPA assay is sensitive and specific and has potential for rapid screening of Salmonella spp. by food industry.     

Loop‐mediated isothermal amplification for the rapid detection of Gardnerella vaginalis

The aim of this study was to develop a method for the rapid detection of Gardnerella vaginalis, which is proposed to play a key role in the pathogenesis of bacterial vaginosis. Specific loop‐mediated isothermal amplification (LAMP) primers were designed and used to detect target DNA within 45 min under isothermal conditions. Comparative screening indicated that the LAMP assay is superior to PCR in terms of rapidity, and is equivalent in sensitivity and specificity. This LAMP assay can be used for rapid screening and detection of G. vaginalis in vaginal samples; the limit of detection is 10 fg DNA.

     

Detection of Botrytis cinerea by loop-mediated isothermal amplification

Aims: To develop a sensitive, rapid and simple method for detection of Botrytis cinerea based on loop‐mediated isothermal amplification (LAMP) that would be suitable for use outside a conventional laboratory setting. Methods and Results: A LAMP assay was designed based on the intergenic spacer of the B. cinerea nuclear ribosomal DNA (rDNA). The resulting assay was characterized in terms of sensitivity and specificity using DNA extracted from cultures. The assay consistently amplified 65 pg B. cinerea DNA. No cross‐reactivity was observed with a range of other fungal pathogens, with the exception of the closely related species Botrytis pelargonii. Use of a novel real‐time LAMP platform (the OptiGene Genie I) allowed detection of B. cinerea in infected rose petals, with amplification occurring in <15 min. Conclusions: The LAMP assay that was developed is suitable for rapid detection of B. cinerea in infected plant material. Significance and Impact of the Study: The LAMP method combines the sensitivity and specificity of nucleic acid‐based methods with simplified equipment and a reduced reaction time. These features make the method potentially suitable for on‐site use, where the results of testing could help to inform decisions regarding the storage and processing of commodities affected by B. cinerea, such as cut flowers, fruit and vegetables.     

Rapid and sensitive detection of Acidovorax citrulli in cucurbit seeds by visual loop‐mediated isothermal amplification assay

A rapid, sensitive and visual loop‐mediated isothermal amplification (LAMP) method for detecting Acidovorax citrulli in cucurbit seed was developed in this study. The LAMP primers were designed to recognize the non‐ribosomal peptide synthetase (NRPS) gene (locus tag: Aave_4658) from A. citrulli. The LAMP assay was conducted at 64°C in 1 hr with calcein as an indicator. The sensitivity and specificity of the LAMP assay were further compared with those of a conventional polymerase chain reaction (PCR). The LAMP assay is highly specific to A. citrulli, and no cross‐reaction was observed with other bacterial pathogen. The sensitivity of the LAMP assay was 100‐fold higher than that of conventional PCR with a detection limit of 1 pg of genomic DNA. Using the LAMP assay, 7 of 12 cantaloupe seedlots collected from Xinjiang province were determined to be positive for A. citrulli. In contrast, only 2 of 12 seedlots showed positive for the pathogen with conventional PCR. Moreover, A. citrulli was detected in 100% of artificially infested seedlots with 0.01% infestation or greater. Our results demonstrated that the LAMP assay was simple, visual and sensitive for detecting A. citrulli, especially in seed health testing. Hence, this method has great potential application in routine detecting seed‐borne pathogens and reducing the risk of epidemics.     

Development of a new loop-mediated isothermal amplification assay for <Emphasis Type="Italic">prt</Emphasis> (<Emphasis Type="Italic">rfbS</Emphasis>) gene to improve the identification of <Emphasis Type="Italic">Salmonella</Emphasis> serogroup D

Loop-mediated isothermal amplification (LAMP) is a promising nucleic acid assay for rapid and cost-effective detection of pathogen-specific sequences within a sample. Development of an appropriate taxonomic group-specific LAMP assay highly relies on the design of proper primers to cover all major members of the taxon. Regarding this fact, we designed and evaluated a new LAMP primer set specific to prt (rfbS) gene for rapid identification of Salmonella serogroup D serotypes. Unlike the previously reported LAMP assay for serogroup D which detects solely the non-typhoidal serotypes; the new LAMP primers set detects both typhoidal and non-typhoidal serotypes of this serogroup with a detection limit of 10 CFU/rection. Furthermore, the technique was successfully applied to artificially contaminated meat samples with an inoculation level of 1–5 CFU/250 ml of Salmonella Enteritidis, following a 5-h pre-enrichment step in tryptic soy broth. Overall, the new LAMP assay and its optimized setup would be useful for fast diagnosis of food poisoning incidents caused by these bacteria.     

A simple and sensitive method for detection of Bacillus anthracis by loop‐mediated isothermal amplification

Aims: To develop a rapid and simple system for detection of Bacillus anthracis using a loop‐mediated isothermal amplification (LAMP) method and determine the suitability of LAMP for rapid identification of B. anthracis infection. Methods and Results: A specific LAMP assay targeting unique gene sequences in the bacterial chromosome and two virulence plasmids, pXO1 and pXO2, was designed. With this assay, it was possible to detect more than 10 fg of bacterial DNA per reaction and obtain results within 30–40 min under isothermal conditions at 63°C. No cross‐reactivity was observed among Bacillus cereus group and other Bacillus species. Furthermore, in tests using blood specimens from mice inoculated intranasally with B. anthracis spores, the sensitivity of the LAMP assay following DNA extraction methods using a Qiagen DNeasy kit or boiling protocol was examined. Samples prepared by both methods showed almost equivalent sensitivities in LAMP assay. The detection limit was 3·6 CFU per test. Conclusions: The LAMP assay is a simple, rapid and sensitive method for detecting B. anthracis. Significance and Impact of the Study: The LAMP assay combined with boiling extraction could be used as a simple diagnostic method for identification of B. anthracis infection.     

Rapid and simple DNA extraction method for the detection of enterotoxigenic Staphylococcus aureus directly from food samples: comparison of PCR and LAMP methods

Aims: The study describes the development of simple and rapid DNA extraction method in combination with loop‐mediated isothermal amplification (LAMP) to detect enterotoxigenic Staphylococcus aureus in food samples. Methods and Results: In this study, isolation of genomic DNA of enterotoxigenic Staph. aureus from spiked milk, milk burfi, khoa, sugarcane juice and boiled rice was carried out by boiling the isolated sample pellets for 10 min with 1% Triton X‐100. The isolated DNA was evaluated by polymerase chain reaction (PCR) and LAMP method. The LAMP was found to be 100 times more sensitive than PCR. The LAMP assay was very specific for Staph. aureus, and the presence of other contaminating bacterial DNAs and food matrix did not interfere or inhibit the LAMP assay. Conclusions: The template DNA extraction method developed in this study for food samples is simple, rapid and cost‐effective. LAMP was found to be less sensitive to matrix effect of food, compared to PCR. Significance and Impact of the Study: The method is suitable for direct detection of Staph. aureus without any enrichment in contaminated food samples and hence finds its application in food safety analysis, in permutation with LAMP.     

Loop‐mediated isothermal amplification assay targeting the blaCTX‐M9 gene for detection of extended spectrum β‐lactamase‐producing Escherichia coli and Klebsiella pneumoniae

Extended‐spectrum β‐lactamases (ESBLs) produced by Enterobacteriaceae are one of the resistance mechanisms to most β‐lactam antibiotics. ESBLs are currently a major problem in both hospitals and community settings worldwide. Rapid and reliable means of detecting ESBL‐producing bacteria is necessary for identification, prevention and treatment. Loop‐mediated isothermal amplification (LAMP) is a technique that rapidly amplifies DNA with high specificity and sensitivity under isothermal conditions. This study was aimed to develop a convenient, accurate and inexpensive method for detecting ESBL‐producing bacteria by a LAMP technique. ESBLs‐producing Escherichia coli and Klebsiella pneumoniae were isolated from a tertiary hospital in Bangkok, Thailand and reconfirmed by double‐disk synergy test. A set of four specific oligonucleotide primers of LAMP for detection of bla_CTX‐M9 gene was designed based on bla_CTX‐M9 from E. coli (GenBank Accession No. AJ416345). The LAMP reaction was amplified under isothermal temperature at 63°C for 60 min. Ladder‐like patterns of band sizes from 226 bp of the bla_CTX‐M9 DNA target was observed. The LAMP product was further analyzed by restriction digestion with MboI and TaqI endonucleases. The fragments generated were approximately 168, 177 and 250 bp in size for MboI digestion and 165, 193, 229, 281 and 314 bp for TaqI digestion, which is in agreement with the predicted sizes. The sensitivity of the LAMP technique to bla_CTX‐M9 was greater than that of the PCR method by at least 10,000‐fold. These results showed that the LAMP primers specifically amplified only the bla_CTX‐M9 gene. Moreover, the presence of LAMP amplicon was simply determined by adding SYBR Green I in the reaction. In conclusion, this technique for detection of ESBLs is convenient, reliable and easy to perform routinely in hospitals or laboratory units in developing countries.     

Rapid detection of Phytophthora nicotianae by simple DNA extraction and real‐time loop‐mediated isothermal amplification assay

Phytophthora nicotianae is a phytopathogenic oomycete with a wide host range and worldwide distribution. Rapid detection and diagnosis at the early stages of disease development are important for the effective control of P. nicotianae. In this study, we designed a simple and rapid loop‐mediated isothermal amplification (LAMP)‐based detection method for P. nicotianae. We tested three DNA extraction methods and selected the Kaneka Easy DNA Extraction Kit version 2, which is rapid and robust for LAMP‐based detection. The designed primers were tested using mycelial DNA from 35 species (81 isolates) of Phytophthora, 12 species (12 isolates) of Pythium, one isolate of Phytopythium and one isolate each from seven other soil‐borne pathogens. All of the 42 P. nicotianae isolates were detected by these primers, and no other isolates gave positive results. Three isolates were tested for the sensitivity of the reaction, and the lowest amounts of template DNA that could be detected were 10 fg for two isolates and 1 fg for the third. The target was detected within 25 min in all tested samples, including DNA extracted from both inoculated and naturally infected plants. In contrast, PCR assays with P. nicotianae‐specific primers failed or showed weakened detection in several samples. Thus, we found that the rapid DNA extraction and LAMP assay methods developed in this study can be used to detect P. nicotianae with high sensitivity, specificity and stability.     

Rapid and sensitive detection of Singapore grouper iridovirus by loop-mediated isothermal amplification

Aims:  The aim of this paper was to develop a loop-mediated isothermal amplification (LAMP) method for rapid, sensitive and inexpensive detection of Singapore grouper iridovirus (SGIV) in grouper (GP), Epinephelus sp.
Methods and Results:  A set of six specific primers was designed by targeting the SGIV ORF-014L. With Bst DNA polymerase large fragment, the target DNA can be amplified as early as 20 min at 65°C in a simple water bath. The detection limit is about 0·02 fg (equivalent to 6·3 copies) of plasmid ORF-014L. LAMP products could be judged with three different methods. There were no cross-reactions with seven other aquatic animal viruses indicating high specificity of the LAMP. The LAMP method was applied to detect SGIV in virus-infected GP cells and GP tissues effectively.
Conclusions:  The LAMP described in this study is a cheap, sensitive, specific and rapid protocol for the detection of SGIV in cells and in GP tissues.
Significance and Impact of the Study:  The developed LAMP method can be simply applied both in field condition and in laboratory operation for specific detection of SGIV infection.