Structure-based design, synthesis and SAR of a novel series of thiopheneamidine urokinase plasminogen activator inhibitors

The serine protease urokinase plasminogen activator (uPA) is thought to play a central role in tumor metastasis and angiogenesis. Molecular modeling studies suggest that 5-thiomethylthiopheneamidine inhibits uPA by binding at the S1 pocket of the active site. Further structure based elaboration of this residue resulted in a novel class of potent and selective inhibitors of uPA.     

A urokinase-type plasminogen activator-inhibiting cyclic peptide with an unusual P2 residue and an extended protease binding surface demonstrates new modalities for enzyme inhibition

To find new principles for inhibiting serine proteases, we screened phage-displayed random peptide repertoires with urokinase-type plasminogen activator (uPA) as the target. The most frequent of the isolated phage clones contained the disulfide bridge-constrained sequence CSWRGLENHRMC, which we designated upain-1. When expressed recombinantly with a protein fusion partner, upain-1 inhibited the enzymatic activity of uPA competitively with a temperature and pH-dependent K(i), which at 25 degrees C and pH 7.4 was approximately 500 nm. At the same conditions, the equilibrium dissociation constant K(D), monitored by displacement of p-aminobenzamidine from the specificity pocket of uPA, was approximately 400 nm. By an inhibitory screen against other serine proteases, including trypsin, upain-1 was found to be highly selective for uPA. The cyclical structure of upain-1 was indispensable for uPA binding. Alanine-scanning mutagenesis identified Arg(4) of upain-1 as the P(1) residue and indicated an extended binding interaction including the specificity pocket and the 37-, 60-, and 97-loops of uPA and the P(1), P(2), P(3)', P(4)', and the P(5)' residues of upain-1. Substitution with alanine of the P(2) residue, Trp(3), converted upain-1 into a distinct, although poor, uPA substrate. Upain-1 represents a new type of uPA inhibitor that achieves selectivity by targeting uPA-specific surface loops. Most likely, the inhibitory activity depends on its cyclical structure and the unusual P(2) residue preventing the scissile bond from assuming a tetrahedral geometry and thus from undergoing hydrolysis. Peptide-derived inhibitors such as upain-1 may provide novel mechanistic information about enzyme-inhibitor interactions and alternative methodologies for designing effective protease inhibitors.     

Solid-phase parallel synthesis and SAR of 4-amidofuran-3-one inhibitors of cathepsin S: Effect of sulfonamides P3 substituents on potency and selectivity

Highly potent and selective 4-amidofuran-3-one inhibitors of cathepsin S are described. The synthesis and structure–activity relationship of a series of inhibitors with a sulfonamide moiety in the P3 position is presented. Several members of the series show sub-nanomolar inhibition of the target enzyme as well as an excellent selectivity profile and good cellular potency. Molecular modeling of the most interesting inhibitors describes interactions in the extended S3 pocket and explains the observed selectivity towards cathepsin K.     

Rational design of potent and selective NH-linked aryl/heteroaryl cathepsin K inhibitors

Prior reports from our laboratories have identified the nonpeptidic inhibitor 2 as a potent and selective Cathepsin K (Cat K) inhibitor. Modelling studies suggested that the introduction of a NH linker between the P3 aryl and P2 leucinamide moieties would allow the formation of a H-bond with the Gly66 residue of Cat K, hopefully increasing potency. Aniline 4 was thus synthesized and showed improved potency over its predecessor 2. Further modelling concluded that a 2-substituted five membered ring could more adequately place the P3 moiety of 4 into the S3 pocket of Cat K. The synthesis of the 2-substituted thiophene 5 confirmed this hypothesis by displaying a slight increase in potency against Cat K (>10-fold increase in potency vs 2) and a good selectivity profile against Cathepsins B, L, and S. This rationally designed inhibitor 5 also displayed increased potency in a functional bone resorption assay (10nM) versus 2 (95 nM).     

Structural basis of specificity of a peptidyl urokinase inhibitor, upain-1

Urokinase-type plasminogen activator (uPA) plays a crucial role in the regulation of plasminogen activation, tumor cell adhesion and migration. The inhibition of uPA activity is a promising mechanism for anti-cancer therapy. A cyclic peptidyl inhibitor, upain-1, CSWRGLENHRMC, was identified recently as a competitive and highly specific uPA inhibitor. We determined the crystal structure of uPA in complex with upain-1 at 2.15 A. The structure reveals that the cyclic peptide adopts a rigid conformation stabilized by a disulfide bond (residues 1-12) and three tight beta turns (residues 3-6, 6-9, 9-12). The Glu7 residue of upain-1 forms hydrogen bonds with the main chain nitrogen atoms of residues 4, 5, and 6 of upain-1, and is also critical for maintaining the active conformation of upain-1. The Arg4 of upain-1 is inserted into the uPA's specific S1 pocket. The Ser2 residue of upain-1 locates close to the S1beta pocket of uPA. The Gly5 and Glu7 residues of upain-1 occupy the S2 pocket and the oxyanion hole of uPA, respectively. Furthermore, the Asn8 residue of upain-1 binds to the 37- and 60-loops of uPA and renders the specificity of upain-1 for uPA. Based on this structure, a new pharmacophore for the design of highly specific uPA inhibitors was proposed.     

A serpin-induced extensive proteolytic susceptibility of urokinase-type plasminogen activator implicates distortion of the proteinase substrate-binding pocket and oxyanion hole in the serpin inhibitory mechanism.

The formation of stable complexes between serpins and their target serine proteinases indicates formation of an ester bond between the proteinase active-site serine and the serpin P1 residue [Egelund, R., Rodenburg, K.W., Andreasen, P.A., Rasmussen, M.S., Guldberg, R.E. & Petersen, T.E. (1998) Biochemistry 37, 6375-6379]. An important question concerning serpin inhibition is the contrast between the stability of the ester bond in the complex and the rapid hydrolysis of the acyl-enzyme intermediate in general serine proteinase-catalysed peptide bond hydrolysis. To answer this question, we used limited proteolysis to detect conformational differences between free urokinase-type plasminogen activator (uPA) and uPA in complex with plasminogen activator inhibitor-1 (PAI-1). Whereas the catalytic domain of free uPA, pro-uPA, uPA in complex with non-serpin inhibitors and anhydro-uPA in a non-covalent complex with PAI-1 was resistant to proteolysis, the catalytic domain of PAI-1-complexed uPA was susceptible to proteolysis. The cleavage sites for four different proteinases were localized in specific areas of the C-terminal beta-barrel of the catalytic domain of uPA, providing evidence that the serpin inhibitory mechanism involves a serpin-induced massive rearrangement of the proteinase active site, including the specificity pocket, the oxyanion hole, and main-chain binding area, rendering the proteinase unable to complete the normal hydrolysis of the acyl-enzyme intermediate. The distorted region includes the so-called activation domain, also known to change conformation on zymogen activation.     

Inhibition of serine proteases by functionalized sulfonamides coupled to the 1,2,5-thiadiazolidin-3-one 1,1 dioxide scaffold.

A challenge associated with drug design is the development of selective inhibitors of proteases (serine or cysteine) that exhibit the same primary substrate specificity, that is, show a preference for the same P(1) residue. While these proteases have similar active sites, nevertheless there are subtle differences in their S and S' subsites which can be exploited. We describe herein for the first time the use of functionalized sulfonamides as a design and diversity element which, when coupled to the 1,2,5-thiadiazolidin-3-one 1,1 dioxide scaffold yields potent, time-dependent inhibitors of the serine proteases human leukocyte elastase (HLE), proteinase 3 (PR 3) and cathepsin G(Cat G). Our preliminary findings suggest that (a) appending to the 1,2,5-thiadiazolidin-3-one 1,1 dioxide scaffold recognition and diversity elements that interact with both the S and S' subsites of a target protease may result in optimal enzyme selectivity and potency and, (b) functionalized sulfonamides constitute a powerful design and diversity element with low intrinsic chemical reactivity and potentially wide applicability.     

New pyrazolyl and thienyl aminohydantoins as potent BACE1 inhibitors: exploring the S2' region

The proteolytic enzyme β-secretase (BACE1) plays a central role in the synthesis of the pathogenic β-amyloid in Alzheimer's disease. SAR studies of the S2' region of the BACE1 ligand binding pocket with pyrazolyl and thienyl P2' side chains are reported. These analogs exhibit low nanomolar potency for BACE1, and demonstrate >50- to 100-fold selectivity for the structurally related aspartyl proteases BACE2 and cathepsin D. Small groups attached at the nitrogen of the P2' pyrazolyl moiety, together with the P3 pyrimidine nucleus projecting into the S3 region of the binding pocket, are critical components to ligand's potency and selectivity. P2' thiophene side chain analogs are highly potent BACE1 inhibitors with excellent selectivity against cathepsin D, but only modest selectivity against BACE2. The cell-based activity of these new analogs tracked well with their increased molecular binding with EC(50) values of 0.07-0.2 μM in the ELISA assay for the most potent analogs.     

Identification of orally bioavailable,non-amidine inhibitors of Urokinase Plasminogen Activator (uPA)

In this Letter we report the synthesis and evaluation of a series of non-amidine inhibitors of Urokinase Plasminogen Activator (uPA). Starting from compound 1, a significant change provided compounds in which the amidine, binding in the S1 pocket, was replaced with a primary amine. Further modifications led to the identification of potent, selective, and orally bioavailable uPA inhibitors.     

Discovery of (S)-6-methoxy-chroman-3-carboxylic acid (4-pyridin-4-yl-phenyl)-amide as potent and isoform selective ROCK2 inhibitors

ROCK1 and ROCK2 are highly homologous isoforms. Accumulated studies indicate that they have distinct different functions, and the development of isoform selective ROCK inhibitors will pave new roads for the treatment of various diseases. In this work, a series of amide-chroman derivatives were synthesized and biologically evaluated in order to develop potent and isoform selective ROCK2 inhibitors. Remarkably, (S)-6-methoxy-chroman-3-carboxylic acid (4-pyridin-4-yl-phenyl)-amide ((S)-7c) possessed ROCK2 inhibitory activity with an IC₅₀ value of 3?nM and 22.7-fold isoform selectivity (vs. ROCK1). Molecular docking indicated that hydrophobic interactions were the key element for the high potency and isoform selectivity of (S)-7c. The binding free energies predicted by MM/GBSA were in good agreement with the experimental bioactivities, and the analysis of individual energy terms suggested that residue Lys105 in ROCK1 or Lys121 in ROCK2 was the key residue for the isoform selectivity of (S)-7c.     

Exploiting differences in caspase-2 and -3 S₂ subsites for selectivity: structure-based design, solid-phase synthesis and in vitro activity of novel substrate-based caspase-2 inhibitors

Several caspases have been implicated in the pathogenesis of Huntington's disease (HD); however, existing caspase inhibitors lack the selectivity required to investigate the specific involvement of individual caspases in the neuronal cell death associated with HD. In order to explore the potential role played by caspase-2, the potent but non-selective canonical Ac-VDVAD-CHO caspase-2 inhibitor 1 was rationally modified at the P(2) residue in an attempt to decrease its activity against caspase-3. With the aid of structural information on the caspase-2, and -3 active sites and molecular modeling, a 3-(S)-substituted-l-proline along with four additional scaffold variants were selected as P(2) elements for their predicted ability to clash sterically with a residue of the caspase-3 S(2) pocket. These elements were then incorporated by solid-phase synthesis into pentapeptide aldehydes 33a-v. Proline-based compound 33h bearing a bulky 3-(S)-substituent displayed advantageous characteristics in biochemical and cellular assays with 20- to 60-fold increased selectivity for caspase-2 and ～200-fold decreased caspase-3 potency compared to the reference inhibitor 1. Further optimization of this prototype compound may lead to the discovery of valuable pharmacological tools for the study of caspase-2 mediated cell death, particularly as it relates to HD.     

The synthesis and structure-activity relationship studies of selective acetyl-CoA carboxylase inhibitors containing 4-(thiazol-5-yl)but-3-yn-2-amino motif: polar region modifications

The structure-activity relationship study focused on the polar region of the HTS hit A-80040 (1) producing several series of potent and selective ACC2 inhibitors. The SAR suggests a compact lipophilic pocket that does not tolerate polar and ionic groups. Replacement of the hydroxyurea group with isoxazoles improves ACC2 selectivity while maintaining potency. Variations at the propargylic site of 11a reduce ACC2 potency.     

4-amidinobenzylamine-based inhibitors of urokinase

A series of 4-amidinobenzylamine-based peptidomimetic inhibitors of urokinase was synthesized. The most potent one, benzylsulfonyl-D-Ser-Ala-4-amidinobenzylamide 16, inhibits uPA with a K(i) of 7.7 nM but is less selective than 10 with a Gly as P2 residue. Hydroxyamidine and carbonate prodrugs were prepared, which are rapidly converted into the active inhibitors in rats after subcutaneous application.     

Selective urokinase-type plasminogen activator (uPA) inhibitors. Part 3: 1-isoquinolinylguanidines

A series of 1-isoquinolinylguanidines are shown to be potent inhibitors of uPA with selectivity over tPA and plasmin. Potency is enhanced by the presence of a 4-halo and a 7-aryl substituent, particularly when substituted by a 3-carboxylic acid group. Compound 13j (UK-356,202) combines excellent potency and selectivity, and has been selected as a candidate for clinical evaluation.     

1-(1,3-Benzodioxol-5-ylmethyl)-3-[4-(1H-imidazol-1-yl)phenoxy]-piperidine analogs as potent and selective inhibitors of nitric oxide formation

A new series of 1-(1,3-benzodioxol-5-ylmethyl)-3-[4-(1H-Imidazol-1-yl)phenoxy]-piperidine analogs were designed and identified as potent and selective inhibitors of NO formation based both on the crystal structure of a murine iNOS Delta114 monomer domain/ inhibitor complex and inhibition of the NO formation in human A172 cell assays. Compound 12S showed high potency and high iNOS selectivity versus nNOS and eNOS.     

Covalent inhibitors of nicotinamide N-methyltransferase (NNMT) provide evidence for target engagement challenges in situ

Nicotinamide N-methyltransferase (NNMT) catalyzes the N-methylation of nicotinamide using S-adenosyl-L-methionine (SAM) as a methyl donor and, through doing so, can modulate cellular methylation potential to impact diverse epigenetic processes. NNMT has been implicated in a range of diseases, including cancer and metabolic disorders. Potent, selective, and cell-active inhibitors would constitute valuable probes to study the biological functions and therapeutic potential of NNMT. We previously reported the discovery of electrophilic small molecules that inhibit NNMT by reacting with an active-site cysteine residue in the SAM-binding pocket. Here, we have used activity-based protein profiling (ABPP)-guided medicinal chemistry to optimize the potency and selectivity of NNMT inhibitors, culminating in the discovery of multiple alpha-chloroacetamide (αCA) compounds with sub-µM IC₅₀ values in vitro and excellent proteomic selectivity in cell lysates. However, these compounds showed much weaker inhibition of NNMT in cells, a feature that was not shared by off-targets of the αCAs. Our results show the potential for developing potent and selective covalent inhibitors of NNMT, but also highlight challenges that may be faced in targeting this enzyme in cellular systems.     

4-Aminoarylguanidine and 4-aminobenzamidine derivatives as potent and selective urokinase-type plasminogen activator inhibitors

The structure-based design of potent and selective urokinase-type plasminogen activator (uPA) inhibitors with 4-aminoarylamidine or 4-aminoarylguanidine S1 binding groups, is described.     

Development of calpain-specific inactivators by screening of positional scanning epoxide libraries

Calpains are calcium-dependent proteases that are required for numerous intracellular processes but also play an important role in the development of pathologies such as ischemic injury and neurodegeneration. Many current small molecule calpain inhibitors also inhibit other cysteine proteases, including cathepsins, and need improved selectivity. The specificity of inhibition of several calpains and papain was profiled using synthetic positional scanning libraries of epoxide-based compounds that target the active-site cysteine. These peptidomimetic libraries probe the P4, P3, and P2 positions, display (S,S)- or (R,R)-epoxide stereochemistries, and incorporate both natural and non-natural amino acids. To facilitate library screening, an SDS-PAGE assay that measures the extent of hydrolysis of an inactive recombinant m-calpain was developed. Individual epoxide inhibitors were synthesized guided by calpain-specific preferences observed from the profiles and tested for inhibition against calpain. The most potent compounds were assayed for specificity against cathepsins B, L, and K. Several compounds demonstrated high inhibition specificity for calpains over cathepsins. The best of these inhibitors, WRH(R,R), irreversibly inactivates m- and mu-calpain rapidly (k(2)/K(i) = 131,000 and 16,500 m(-1) s(-1), respectively) but behaves exclusively as a reversible and less potent inhibitor toward the cathepsins. X-ray crystallography of the proteolytic core of rat mu-calpain inactivated by the epoxide compounds WR gamma-cyano-alpha-aminobutyric acid (S,S) and WR allylglycine (R,R) reveals that the stereochemistry of the epoxide influences positioning and orientation of the P2 residue, facilitating alternate interactions within the S2 pocket. Moreover, the WR gamma-cyano-alpha-aminobutyric acid (S,S)-complexed structure defines a novel hydrogen-bonding site within the S2 pocket of calpains.     

Synthesis and biological activity of selective pipecolic acid-based TNF-alpha converting enzyme (TACE) inhibitors

A series of novel, selective TNF-alpha converting enzyme inhibitors based on 4-hydroxy and 5-hydroxy pipecolate hydroxamic acid scaffolds is described. The potency and selectivity of TACE inhibition is dramatically influenced by the nature of the sulfonamide group which interacts with the S1' site of the enzyme. Substituted 4-benzyloxybenzenesulfonamides exhibit excellent TACE potency with >100x selectivity over inhibition of matrix metalloprotease-1 (MMP-1). Alkyl substituents on the ortho position of the benzyl ether moiety give the most potent inhibition of TNF-alpha release in LPS-treated human whole blood.     

Design of novel and selective inhibitors of urokinase-type plasminogen activator with improved pharmacokinetic properties for use as antimetastatic agents

The serine protease urokinase-type plasminogen activator (uPA) interacts with a specific receptor (uPAR) on the surface of various cell types, including tumor cells, and plays a crucial role in pericellular proteolysis. High levels of uPA and uPAR often correlate with poor prognosis of cancer patients. Therefore, the specific inhibition of uPA with small molecule active-site inhibitors is one strategy to decrease the invasive and metastatic activity of tumor cells. We have developed a series of highly potent and selective uPA inhibitors with a C-terminal 4-amidinobenzylamide residue. Optimization was directed toward reducing the fast elimination from circulation that was observed with initial analogues. The x-ray structures of three inhibitor/uPA complexes have been solved and were used to improve the inhibition efficacy. One of the most potent and selective derivatives, benzylsulfonyl-D-Ser-Ser-4-amidinobenzylamide (inhibitor 26), inhibits uPA with a Ki of 20 nm. This inhibitor was used in a fibrosarcoma model in nude mice using lacZ-tagged human HT1080 cells, to prevent experimental lung metastasis formation. Compared with control (100%), an inhibitor dose of 2 x 1.5 mg/kg/day reduced the number of experimental metastases to 4.6 +/- 1%. Under these conditions inhibitor 26 also significantly prolonged survival. All mice from the control group died within 43 days after tumor cell inoculation, whereas 50% of mice from the inhibitor-treated group survived more than 117 days. This study demonstrates that the specific inhibition of uPA by these inhibitors may be a useful strategy for the treatment of cancer to prevent metastasis.