Using genic sequence capture in combination with a syntenic pseudo genome to map a deletion mutant in a wheat species

Mapping‐by‐sequencing analyses have largely required a complete reference sequence and employed whole genome re‐sequencing. In species such as wheat, no finished genome reference sequence is available. Additionally, because of its large genome size (17 Gb), re‐sequencing at sufficient depth of coverage is not practical. Here, we extend the utility of mapping by sequencing, developing a bespoke pipeline and algorithm to map an early‐flowering locus in einkorn wheat (Triticum monococcum L.) that is closely related to the bread wheat genome A progenitor. We have developed a genomic enrichment approach using the gene‐rich regions of hexaploid bread wheat to design a 110‐Mbp NimbleGen SeqCap EZ in solution capture probe set, representing the majority of genes in wheat. Here, we use the capture probe set to enrich and sequence an F₂ mapping population of the mutant. The mutant locus was identified in T. monococcum, which lacks a complete genome reference sequence, by mapping the enriched data set onto pseudo‐chromosomes derived from the capture probe target sequence, with a long‐range order of genes based on synteny of wheat with Brachypodium distachyon. Using this approach we are able to map the region and identify a set of deleted genes within the interval.     

Genotype‐specific SNP map based on whole chromosome 3B sequence information from wheat cultivars Arina and Forno

Agronomically important traits are frequently controlled by rare, genotype‐specific alleles. Such genes can only be mapped in a population derived from the donor genotype. This requires the development of a specific genetic map, which is difficult in wheat because of the low level of polymorphism among elite cultivars. The absence of sufficient polymorphism, the complexity of the hexaploid wheat genome as well as the lack of complete sequence information make the construction of genetic maps with a high density of reproducible and polymorphic markers challenging. We developed a genotype‐specific genetic map of chromosome 3B from winter wheat cultivars Arina and Forno. Chromosome 3B was isolated from the two cultivars and then sequenced to 10‐fold coverage. This resulted in a single‐nucleotide polymorphisms (SNP) database of the complete chromosome. Based on proposed synteny with the Brachypodium model genome and gene annotation, sequences close to coding regions were used for the development of 70 SNP‐based markers. They were mapped on a Arina × Forno Recombinant Inbred Lines population and found to be spread over the complete chromosome 3B. While overall synteny was well maintained, numerous exceptions and inversions of syntenic gene order were identified. Additionally, we found that the majority of recombination events occurred in distal parts of chromosome 3B, particularly in hot‐spot regions. Compared with the earlier map based on SSR and RFLP markers, the number of markers increased fourfold. The approach presented here allows fast development of genotype‐specific polymorphic markers that can be used for mapping and marker‐assisted selection.     

RNA‐Seq bulked segregant analysis enables the identification of high‐resolution genetic markers for breeding in hexaploid wheat

The identification of genetic markers linked to genes of agronomic importance is a major aim of crop research and breeding programmes. Here, we identify markers for Yr15, a major disease resistance gene for wheat yellow rust, using a segregating F₂ population. After phenotyping, we implemented RNA sequencing (RNA‐Seq) of bulked pools to identify single‐nucleotide polymorphisms (SNP) associated with Yr15. Over 27 000 genes with SNPs were identified between the parents, and then classified based on the results from the sequenced bulks. We calculated the bulk frequency ratio (BFR) of SNPs between resistant and susceptible bulks, selecting those showing sixfold enrichment/depletion in the corresponding bulks (BFR > 6). Using additional filtering criteria, we reduced the number of genes with a putative SNP to 175. The 35 SNPs with the highest BFR values were converted into genome‐specific KASP assays using an automated bioinformatics pipeline (PolyMarker) which circumvents the limitations associated with the polyploid wheat genome. Twenty‐eight assays were polymorphic of which 22 (63%) mapped in the same linkage group as Yr15. Using these markers, we mapped Yr15 to a 0.77‐cM interval. The three most closely linked SNPs were tested across varieties and breeding lines representing UK elite germplasm. Two flanking markers were diagnostic in over 99% of lines tested, thus providing a reliable haplotype for marker‐assisted selection in these breeding programmes. Our results demonstrate that the proposed methodology can be applied in polyploid F₂ populations to generate high‐resolution genetic maps across target intervals.     

A high‐resolution genetic map of the cereal crown rot pathogen Fusarium pseudograminearum provides a near‐complete genome assembly

Fusarium pseudograminearum is an important pathogen of wheat and barley, particularly in semi‐arid environments. Previous genome assemblies for this organism were based entirely on short read data and are highly fragmented. In this work, a genetic map of F. pseudograminearum has been constructed for the first time based on a mapping population of 178 individuals. The genetic map, together with long read scaffolding of a short read‐based genome assembly, was used to give a near‐complete assembly of the four F. pseudograminearum chromosomes. Large regions of synteny between F. pseudograminearum and F. graminearum, the related pathogen that is the primary causal agent of cereal head blight disease, were previously proposed in the core conserved genome, but the construction of a genetic map to order and orient contigs is critical to the validation of synteny and the placing of species‐specific regions. Indeed, our comparative analyses of the genomes of these two related pathogens suggest that rearrangements in the F. pseudograminearum genome have occurred in the chromosome ends. One of these rearrangements includes the transposition of an entire gene cluster involved in the detoxification of the benzoxazolinone (BOA) class of plant phytoalexins. This work provides an important genomic and genetic resource for F. pseudograminearum, which is less well characterized than F. graminearum. In addition, this study provides new insights into a better understanding of the sexual reproduction process in F. pseudograminearum, which informs us of the potential of this pathogen to evolve.     

A whole‐genome,radiation hybrid mapping resource of hexaploid wheat

Generating a contiguous, ordered reference sequence of a complex genome such as hexaploid wheat (2n = 6x = 42; approximately 17 GB) is a challenging task due to its large, highly repetitive, and allopolyploid genome. In wheat, ordering of whole‐genome or hierarchical shotgun sequencing contigs is primarily based on recombination and comparative genomics‐based approaches. However, comparative genomics approaches are limited to syntenic inference and recombination is suppressed within the pericentromeric regions of wheat chromosomes, thus, precise ordering of physical maps and sequenced contigs across the whole‐genome using these approaches is nearly impossible. We developed a whole‐genome radiation hybrid (WGRH) resource and tested it by genotyping a set of 115 randomly selected lines on a high‐density single nucleotide polymorphism (SNP) array. At the whole‐genome level, 26 299 SNP markers were mapped on the RH panel and provided an average mapping resolution of approximately 248 Kb/cR₁₅₀₀ with a total map length of 6866 cR₁₅₀₀. The 7296 unique mapping bins provided a five‐ to eight‐fold higher resolution than genetic maps used in similar studies. Most strikingly, the RH map had uniform bin resolution across the entire chromosome(s), including pericentromeric regions. Our research provides a valuable and low‐cost resource for anchoring and ordering sequenced BAC and next generation sequencing (NGS) contigs. The WGRH developed for reference wheat line Chinese Spring (CS‐WGRH), will be useful for anchoring and ordering sequenced BAC and NGS based contigs for assembling a high‐quality, reference sequence of hexaploid wheat. Additionally, this study provides an excellent model for developing similar resources for other polyploid species.     

Sequencing of 15 622 gene‐bearing BACs clarifies the gene‐dense regions of the barley genome

Barley (Hordeum vulgare L.) possesses a large and highly repetitive genome of 5.1 Gb that has hindered the development of a complete sequence. In 2012, the International Barley Sequencing Consortium released a resource integrating whole‐genome shotgun sequences with a physical and genetic framework. However, because only 6278 bacterial artificial chromosome (BACs) in the physical map were sequenced, fine structure was limited. To gain access to the gene‐containing portion of the barley genome at high resolution, we identified and sequenced 15 622 BACs representing the minimal tiling path of 72 052 physical‐mapped gene‐bearing BACs. This generated ~1.7 Gb of genomic sequence containing an estimated 2/3 of all Morex barley genes. Exploration of these sequenced BACs revealed that although distal ends of chromosomes contain most of the gene‐enriched BACs and are characterized by high recombination rates, there are also gene‐dense regions with suppressed recombination. We made use of published map‐anchored sequence data from Aegilops tauschii to develop a synteny viewer between barley and the ancestor of the wheat D‐genome. Except for some notable inversions, there is a high level of collinearity between the two species. The software HarvEST:Barley provides facile access to BAC sequences and their annotations, along with the barley–Ae. tauschii synteny viewer. These BAC sequences constitute a resource to improve the efficiency of marker development, map‐based cloning, and comparative genomics in barley and related crops. Additional knowledge about regions of the barley genome that are gene‐dense but low recombination is particularly relevant.     

DNA binding to SMC ATPases—trapped for release

The SMC/Rad50/RecN proteins are universal DNA‐associated ABC‐type ATPases with crucial functions in genome maintenance. New insights into Rad50–DNA complex structure and cohesin regulation inspire a speculative look at the entire superfamily. Identification of a continuous DNA binding site across the Rad50 dimer interface (Liu et al, 2016 ; Seifert et al, 2016 ) suggests a similar site in cohesin. The localization of this site hints a DNA‐activated mechanism for cohesin removal from chromosomes.     

Homomorphic plant sex chromosomes are coming of age

Sex chromosomes are a very peculiar part of the genome that have evolved independently in many groups of animals and plants (Bull 1983 ). Major research efforts have so far been focused on large heteromorphic sex chromosomes in a few animal and plant species (Chibalina & Filatov 2011 ; Zhou & Bachtrog 2012 ; Bellott et al. 2014 ; Hough et al. 2014 ; Zhou et al. 2014 ), while homomorphic (cytologically indistinguishable) sex chromosomes have largely been neglected. However, this situation is starting to change. In this issue, Geraldes et al. ( 2015 ) describe a small (~100 kb long) sex‐determining region on the homomorphic sex chromosomes of poplars (Populus trichocarpa and related species, Fig.  1 ). All species in Populus and its sister genus Salix are dioecious, suggesting that dioecy and the sex chromosomes, if any, should be relatively old. Contrary to this expectation, Geraldes et al. ( 2015 ) demonstrate that the sex‐determining region in poplars is of very recent origin and probably evolved within the genus Populus only a few million years ago.     

Using RAD‐seq to recognize sex‐specific markers and sex chromosome systems

Next‐generation sequencing methods have initiated a revolution in molecular ecology and evolution (Tautz et al. 2010 ). Among the most impressive of these sequencing innovations is restriction site‐associated DNA sequencing or RAD‐seq (Baird et al. 2008 ; Andrews et al. 2016 ). RAD‐seq uses the Illumina sequencing platform to sequence fragments of DNA cut by a specific restriction enzyme and can generate tens of thousands of molecular genetic markers for analysis. One of the many uses of RAD‐seq data has been to identify sex‐specific genetic markers, markers found in one sex but not the other (Baxter et al. 2011 ; Gamble & Zarkower 2014 ). Sex‐specific markers are a powerful tool for biologists. At their most basic, they can be used to identify the sex of an individual via PCR. This is useful in cases where a species lacks obvious sexual dimorphism at some or all life history stages. For example, such tests have been important for studying sex differences in life history (Sheldon 1998 ; Mossman & Waser 1999 ), the management and breeding of endangered species (Taberlet et al. 1993 ; Griffiths & Tiwari 1995 ; Robertson et al. 2006 ) and sexing embryonic material (Hacker et al. 1995 ; Smith et al. 1999 ). Furthermore, sex‐specific markers allow recognition of the sex chromosome system in cases where standard cytogenetic methods fail (Charlesworth & Mank 2010 ; Gamble & Zarkower 2014 ). Thus, species with male‐specific markers have male heterogamety (XY) while species with female‐specific markers have female heterogamety (ZW). In this issue, Fowler & Buonaccorsi ( 2016 ) illustrate the ease by which RAD‐seq data can generate sex‐specific genetic markers in rockfish (Sebastes). Moreover, by examining RAD‐seq data from two closely related rockfish species, Sebastes chrysomelas and Sebastes carnatus (Fig.  1 ), Fowler & Buonaccorsi ( 2016 ) uncover shared sex‐specific markers and a conserved sex chromosome system.     

High‐throughput SNPs for all: genotyping‐in‐thousands

Understanding the genetic structure of species is essential for conservation. It is only with this information that managers, academics, user groups and land‐use planners can understand the spatial scale of migration and local adaptation, source‐sink dynamics and effective population size. Such information is essential for a multitude of applications including delineating management units, balancing management priorities, discovering cryptic species and implementing captive breeding programmes. Species can range from locally adapted by hundreds of metres (Pavey et al. 2010 ) to complete species panmixia (Côté et al. 2013 ). Even more remarkable is that this essential information can be obtained without fully sequenced or annotated genomes, but from mere (putatively) nonfunctional variants. First with allozymes, then microsatellites and now SNPs, this neutral genetic variation carries a wealth of information about migration and drift. For many of us, it may be somewhat difficult to remember our understanding of species conservation before the widespread usage of these useful tools. However most species on earth have yet to give us that ‘peek under the curtain’. With the current diversity on earth estimated to be nearly 9 million species (Mora et al. 2011 ), we have a long way to go for a comprehensive meta‐phylogeographic understanding. A method presented in this issue by Campbell and colleagues (Campbell et al. 2015 ) is a tool that will accelerate the pace in this area. Genotyping‐in‐thousands (GT‐seq) leverages recent advancements in sequencing technology to save many hours and dollars over previous methods to generate this important neutral genetic information.     

Two different CC‐NBS‐LRR genes are required for Lr10‐mediated leaf rust resistance in tetraploid and hexaploid wheat

Comparative study of disease resistance genes in crop plants and their relatives provides insight on resistance gene function, evolution and diversity. Here, we studied the allelic diversity of the Lr10 leaf rust resistance gene, a CC‐NBS‐LRR coding gene originally isolated from hexaploid wheat, in 20 diploid and tetraploid wheat lines. Besides a gene in the tetraploid wheat variety ‘Altar’ that is identical to the hexaploid wheat Lr10, two additional, functional resistance alleles showing sequence diversity were identified by virus‐induced gene silencing in tetraploid wheat lines. In contrast to most described NBS‐LRR proteins, the N‐terminal CC domain of LR10 was found to be under strong diversifying selection. A second NBS‐LRR gene at the Lr10 locus, RGA2, was shown through silencing to be essential for Lr10 function. Interestingly, RGA2 showed much less sequence diversity than Lr10. These data demonstrate allelic diversity of functional genes at the Lr10 locus in tetraploid wheat, and these new genes can now be analyzed for agronomic relevance. Lr10‐based resistance is highly unusual both in its dependence on two, only distantly, related CC‐NBS‐LRR proteins, as well as in the pattern of diversifying selection in the N‐terminal domain. This indicates a new and complex molecular mechanism of pathogen detection and signal transduction.     

Mock communities highlight the diversity of host‐associated eukaryotes

Host‐associated microbes are ubiquitous. Every multicellular eukaryote, and even many unicellular eukaryotes (protists), hosts a diverse community of microbes. High‐throughput sequencing (HTS) tools have illuminated the vast diversity of host‐associated microbes and shown that they have widespread influence on host biology, ecology and evolution (McFall‐Ngai et al. 2013 ). Bacteria receive most of the attention, but protists are also important components of microbial communities associated with humans (Parfrey et al. 2011 ) and other hosts. As HTS tools are increasingly used to study eukaryotes, the presence of numerous and diverse host‐associated eukaryotes is emerging as a common theme across ecosystems. Indeed, HTS studies demonstrate that host‐associated lineages account for between 2 and 12% of overall eukaryotic sequences detected in soil, marine and freshwater data sets, with much higher relative abundances observed in some samples (Ramirez et al. 2014 ; Simon et al. 2015 ; de Vargas et al. 2015 ). Previous studies in soil detected large numbers of predominantly parasitic lineages such as Apicomplexa, but did not delve into their origin [e.g. (Ramirez et al. 2014 )]. In this issue of Molecular Ecology, Geisen et al. ( 2015 ) use mock communities to show that many of the eukaryotic organisms detected by environmental sequencing in soils are potentially associated with animal hosts rather than free‐living. By isolating the host‐associated fraction of soil microbial communities, Geisen and colleagues help explain the surprisingly high diversity of parasitic eukaryotic lineages often detected in soil/terrestrial studies using high‐throughput sequencing (HTS) and reinforce the ubiquity of these host‐associated microbes. It is clear that we can no longer assume that organisms detected in bulk environmental sequencing are free‐living, but instead need to design studies that specifically enumerate the diversity and function of host‐associated eukaryotes. Doing so will allow the field to determine the role host‐associated eukaryotes play in soils and other environments and to evaluate hypotheses on assembly of host‐associated communities, disease ecology and more.     

Genetic dissection of pre‐anthesis sub‐phase durations during the reproductive spike development of wheat

Flowering time is an important factor affecting grain yield in wheat. In this study, we divided reproductive spike development into eight sub‐phases. These sub‐phases have the potential to be delicately manipulated to increase grain yield. We measured 36 traits with regard to sub‐phase durations, determined three grain yield‐related traits in eight field environments and mapped 15 696 single nucleotide polymorphism (SNP, based on 90k Infinium chip and 35k Affymetrix chip) markers in 210 wheat genotypes. Phenotypic and genetic associations between grain yield traits and sub‐phase durations showed significant consistency (Mantel test; r = 0.5377, P < 0.001). The shared quantitative trait loci (QTLs) revealed by the genome‐wide association study suggested a close association between grain yield and sub‐phase duration, which may be attributed to effects on spikelet initiation/spikelet number (double ridge to terminal spikelet stage, DR‐TS) and assimilate accumulation (green anther to anthesis stage, GA‐AN). Moreover, we observed that the photoperiod‐sensitivity allele at the Ppd‐D1 locus on chromosome 2D markedly extended all sub‐phase durations, which may contribute to its positive effects on grain yield traits. The dwarfing allele at the Rht‐D1 (chromosome 4D) locus altered the sub‐phase duration and displayed positive effects on grain yield traits. Data for 30 selected genotypes (from among the original 210 genotypes) in the field displayed a close association with that from the greenhouse. Most importantly, this study demonstrated specific connections to grain yield in narrower time windows (i.e. the eight sub‐phases), rather than the entire stem elongation phase as a whole.     

Towards a whole‐genome sequence for rye (Secale cereale L.)

We report on a whole‐genome draft sequence of rye (Secale cereale L.). Rye is a diploid Triticeae species closely related to wheat and barley, and an important crop for food and feed in Central and Eastern Europe. Through whole‐genome shotgun sequencing of the 7.9‐Gbp genome of the winter rye inbred line Lo7 we obtained a de novo assembly represented by 1.29 million scaffolds covering a total length of 2.8 Gbp. Our reference sequence represents nearly the entire low‐copy portion of the rye genome. This genome assembly was used to predict 27 784 rye gene models based on homology to sequenced grass genomes. Through resequencing of 10 rye inbred lines and one accession of the wild relative S. vavilovii, we discovered more than 90 million single nucleotide variants and short insertions/deletions in the rye genome. From these variants, we developed the high‐density Rye600k genotyping array with 600 843 markers, which enabled anchoring the sequence contigs along a high‐density genetic map and establishing a synteny‐based virtual gene order. Genotyping data were used to characterize the diversity of rye breeding pools and genetic resources, and to obtain a genome‐wide map of selection signals differentiating the divergent gene pools. This rye whole‐genome sequence closes a gap in Triticeae genome research, and will be highly valuable for comparative genomics, functional studies and genome‐based breeding in rye.     

The genome of cowpea (Vigna unguiculata [L.] Walp.)

Cowpea (Vigna unguiculata [L.] Walp.) is a major crop for worldwide food and nutritional security, especially in sub‐Saharan Africa, that is resilient to hot and drought‐prone environments. An assembly of the single‐haplotype inbred genome of cowpea IT97K‐499‐35 was developed by exploiting the synergies between single‐molecule real‐time sequencing, optical and genetic mapping, and an assembly reconciliation algorithm. A total of 519 Mb is included in the assembled sequences. Nearly half of the assembled sequence is composed of repetitive elements, which are enriched within recombination‐poor pericentromeric regions. A comparative analysis of these elements suggests that genome size differences between Vigna species are mainly attributable to changes in the amount of Gypsy retrotransposons. Conversely, genes are more abundant in more distal, high‐recombination regions of the chromosomes; there appears to be more duplication of genes within the NBS‐LRR and the SAUR‐like auxin superfamilies compared with other warm‐season legumes that have been sequenced. A surprising outcome is the identification of an inversion of 4.2 Mb among landraces and cultivars, which includes a gene that has been associated in other plants with interactions with the parasitic weed Striga gesnerioides. The genome sequence facilitated the identification of a putative syntelog for multiple organ gigantism in legumes. A revised numbering system has been adopted for cowpea chromosomes based on synteny with common bean (Phaseolus vulgaris). An estimate of nuclear genome size of 640.6 Mbp based on cytometry is presented.     

A high‐quality chromosome‐level genome assembly of a generalist herbivore,Trichoplusia ni

The cabbage looper, Trichoplusia ni, is a globally distributed highly polyphagous herbivore and an important agricultural pest. T. ni has evolved resistance to various chemical insecticides, and is one of the only two insect species that have evolved resistance to the biopesticide Bacillus thuringiensis (Bt) in agricultural systems and has been selected for resistance to baculovirus infections. We report a 333‐Mb high‐quality T. ni genome assembly, which has N50 lengths of scaffolds and contigs of 4.6 Mb and 140 Kb, respectively, and contains 14,384 protein‐coding genes. High‐density genetic maps were constructed to anchor 305 Mb (91.7%) of the assembly to 31 chromosomes. Comparative genomic analysis of T. ni with Bombyx mori showed enrichment of tandemly duplicated genes in T. ni in families involved in detoxification and digestion, consistent with the broad host range of T. ni. High levels of genome synteny were found between T. ni and other sequenced lepidopterans. However, genome synteny analysis of T. ni and the T. ni derived cell line High Five (Hi5) indicated extensive genome rearrangements in the cell line. These results provided the first genomic evidence revealing the high instability of chromosomes in lepidopteran cell lines known from karyotypic observations. The high‐quality T. ni genome sequence provides a valuable resource for research in a broad range of areas including fundamental insect biology, insect‐plant interactions and co‐evolution, mechanisms and evolution of insect resistance to chemical and biological pesticides, and technology development for insect pest management.     

Genome‐guided investigation of plant natural product biosynthesis

The medicinal plant Madagascar periwinkle, Catharanthus roseus (L.) G. Don, produces hundreds of biologically active monoterpene‐derived indole alkaloid (MIA) metabolites and is the sole source of the potent, expensive anti‐cancer compounds vinblastine and vincristine. Access to a genome sequence would enable insights into the biochemistry, control, and evolution of genes responsible for MIA biosynthesis. However, generation of a near‐complete, scaffolded genome is prohibitive to small research communities due to the expense, time, and expertise required. In this study, we generated a genome assembly for C. roseus that provides a near‐comprehensive representation of the genic space that revealed the genomic context of key points within the MIA biosynthetic pathway including physically clustered genes, tandem gene duplication, expression sub‐functionalization, and putative neo‐functionalization. The genome sequence also facilitated high resolution co‐expression analyses that revealed three distinct clusters of co‐expression within the components of the MIA pathway. Coordinated biosynthesis of precursors and intermediates throughout the pathway appear to be a feature of vinblastine/vincristine biosynthesis. The C. roseus genome also revealed localization of enzyme‐rich genic regions and transporters near known biosynthetic enzymes, highlighting how even a draft genome sequence can empower the study of high‐value specialized metabolites.