Arresting pore formation of a cholesterol-dependent cytolysin by disulfide trapping synchronizes the insertion of the transmembrane beta-sheet from a prepore intermediate

Perfringolysin O (PFO), a member of the cholesterol-dependent cytolysin family of pore-forming toxins, forms large oligomeric complexes comprising up to 50 monomers. In the present study, a disulfide bridge was introduced between cysteine-substituted serine 190 of transmembrane hairpin 1 (TMH1) and cysteine-substituted glycine 57 of domain 2 of PFO. The resulting disulfide-trapped mutant (PFO(C190-C57)) was devoid of hemolytic activity and could not insert either of its transmembrane beta-hairpins (TMHs) into the membrane unless the disulfide was reduced. Both the size of the oligomer formed on the membrane and its rate of formation were unaffected by the oxidation state of the Cys(190)-Cys(57) disulfide bond; thus, the disulfide-trapped PFO was assembled into a prepore complex on the membrane. The conversion of this prepore to the pore complex was achieved by reducing the C190-C57 disulfide bond. PFO(C190-C57) that was allowed to form the prepore prior to the reduction of the disulfide exhibited a dramatic increase in the rate of PFO-dependent hemolysis and the membrane insertion of its TMHs when compared with toxin that had the disulfide reduced prior mixing the toxin with membranes. Therefore, the rate-limiting step in pore formation is prepore assembly, not TMH insertion. These data demonstrate that the prepore is a legitimate intermediate during the insertion of the large transmembrane beta-sheet of the PFO oligomer. Finally, the PFO TMHs do not appear to insert independently, but instead their insertion is coupled.     

The mechanism of pore assembly for a cholesterol-dependent cytolysin: formation of a large prepore complex precedes the insertion of the transmembrane beta-hairpins

Perfringolysin O (PFO) is a member of the cholesterol-dependent cytolysin (CDC) family of membrane-penetrating toxins. The CDCs form large homooligomers (estimated to be comprised of up to 50 CDC monomers) that are responsible for generating a large pore in cholesterol-containing membranes of eukaryotic cells. The assembly of the PFO cytolytic complex was examined to determine whether it forms an oligomeric prepore complex on the membrane prior to the insertion of its membrane-spanning beta-sheet. A PFO oligomeric complex was formed on liposomes at both 4 degrees C and 37 degrees C and shown by SDS-agarose gel electrophoresis to be comprised of a large, comparatively homogeneous complex instead of a distribution of oligomer sizes. At low temperature, the processes of oligomerization and membrane insertion could be resolved, and PFO was found to form an oligomer without significant membrane insertion of its beta-hairpins. Furthermore, PFO was found to increase the ion conductivity through a planar bilayer by large and discrete stepwise changes in conductance that are consistent with the insertion of a preassembled pore complex into the bilayer. The combined results of these analyses strongly support the hypothesis that PFO forms a large oligomeric prepore complex on the membrane surface prior to the insertion of its transmembrane beta-sheet.     

Prepore to pore transition of a cholesterol-dependent cytolysin visualized by electron microscopy

Perfringolysin O (PFO), a soluble toxin secreted by the pathogenic Clostridium perfringens, forms large homo-oligomeric pore complexes comprising up to 50 PFO molecules in cholesterol-containing membranes. In this study, electron microscopy (EM) and single-particle image analysis were used to reconstruct two-dimensional (2D) projection maps from images of oligomeric PFO prepore and pore complexes formed on cholesterol-rich lipid layers. The projection maps are characterized by an outer and an inner ring of density peaks. The outer rings of the prepore and pore complexes are very similar; however, the protein densities that make up the inner ring of the pore complex are more intense and discretely resolved than they are for the prepore complex. The change in inner-ring protein density is consistent with a mechanism in which the monomers within the prepore complex make a transition from a partially disordered state to a more ordered transmembrane beta-barrel in the pore complex. Finally, the orientation of the monomers within the oligomeric complexes was determined by visualization of streptavidin (SA) molecules bound to biotinylated cysteine-substituted residues predicted to face either the inner or outer surface of the oligomeric pore complex. This study provides an unprecedented view of the conversion of the PFO prepore to pore complex.     

Vertical collapse of a cytolysin prepore moves its transmembrane beta-hairpins to the membrane

Perfringolysin O (PFO) is a prototype of the large family of pore-forming cholesterol-dependent cytolysins (CDCs). A central enigma of the cytolytic mechanism of the CDCs is that their membrane-spanning beta-hairpins (the transmembrane amphipathic beta-hairpins (TMHs)) appear to be approximately 40 A too far above the membrane surface to cross the bilayer and form the pore. We now present evidence, using atomic force microscopy (AFM), of a significant difference in the height by which the prepore and pore protrude from the membrane surface: 113+/-5 A for the prepore but only 73+/-5 A for the pore. Time-lapse AFM micrographs show this change in height in real time. Moreover, the monomers in both complexes exhibit nearly identical surface features and these results in combination with those of spectrofluorimetric analyses indicate that the monomers remain in a perpendicular orientation to the bilayer plane during this transition. Therefore, the PFO undergoes a vertical collapse that brings its TMHs to the membrane surface so that they can extend across the bilayer to form the beta-barrel pore.     

Assembly and topography of the prepore complex in cholesterol-dependent cytolysins

Cholesterol-dependent cytolysins are a family of poreforming proteins that have been shown to be virulence factors for a large number of pathogenic bacteria. The mechanism of pore formation for these toxins involves a complex series of events that are known to include binding, oligomerization, and insertion of a transmembrane beta-barrel. Several features of this mechanism remain poorly understood and controversial. Whereas a prepore mechanism has been proposed for perfringolysin O, a very different mechanism has been proposed for the homologous member of the family, streptolysin O. To distinguish between the two models, a novel approach that directly measures the dimension of transmembranes pores was used. Pore formation itself was examined for both cytolysins by encapsulating fluorescein-labeled peptides and proteins of different sizes into liposomes. When these liposomes were re-suspended in a solution containing anti-fluorescein antibodies, toxin-mediated pore formation was monitored directly by the quenching of fluorescein emission as the encapsulated molecules were released, and the dyes were bound by the antibodies. The analysis of pore formation determined using this approach reveals that only large pores are produced by perfringolysin O and streptolysin O during insertion (and not small pores that grow in size). These results are consistent only with the formation of a prepore complex intermediate prior to insertion of the transmembrane beta-barrel into the bilayer. Fluorescence quenching experiments also revealed that PFO in the prepore complex contacts the membrane via domain 4, and that the individual transmembrane beta-hairpins in domain 3 are not exposed to the nonpolar core of the bilayer at this intermediate stage.     

Conformational changes that effect oligomerization and initiate pore formation are triggered throughout perfringolysin O upon binding to cholesterol

Pore formation by the cholesterol-dependent cytolysins (CDCs) requires the presence of cholesterol in the target membrane. Cholesterol was long thought to be the cellular receptor for these toxins, but not all CDCs require cholesterol for binding. Intermedilysin, secreted by Streptococcus intermedius, only binds to membranes containing the human protein CD59 but forms pores only if the membrane contains sufficient cholesterol. In contrast, perfringolysin O (PFO), secreted by Clostridium perfringens, only binds to membranes containing substantial amounts of cholesterol. Given that different steps in the assembly of various CDC pores require cholesterol, here we have analyzed to what extent cholesterol molecules, by themselves, can modulate the conformational changes associated with PFO oligomerization and pore formation. PFO binds to cholesterol when dispersed in aqueous solution, and this binding triggers the distant rearrangement of a beta-strand that exposes an oligomerization interface. Moreover, upon binding to cholesterol, PFO forms a prepore complex, unfolds two amphipathic transmembrane beta-hairpins, and positions their nonpolar surfaces so they associate with the hydrophobic cholesterol surface. The interaction of PFO with cholesterol is therefore sufficient to initiate an irreversible sequence of coupled conformational changes that extend throughout the toxin molecule.     

Fine-tuning of the stability of β-strands by Y181 in perfringolysin O directs the prepore to pore transition

Perfringolysin O (PFO) is a toxic protein that forms β-barrel transmembrane pores upon binding to cholesterol-containing membranes. The formation of lytic pores requires conformational changes in PFO that lead to the conversion of water-soluble monomers into membrane-bound oligomers. Although the general outline of stepwise pore formation has been established, the underlying mechanistic details await clarification. To extend our understanding of the molecular mechanisms that control the pore formation, we compared the hydrogen-deuterium exchange patterns of PFO with its derivatives bearing mutations in the D3 domain. In the case of two of these mutations F318A, Y181A, known from previous work to lead to a decreased lytic activity, global destabilization of all protein domains was observed in their water-soluble forms. This was accompanied by local changes in D3 β-sheet, including unexpected stabilization of functionally important β1 strand in Y181A. In case of the double mutation (F318A/Y181A) that completely abolished the lytic activity, several local changes were retained, but the global destabilization effects of single mutations were reverted and hydrogen-deuterium exchange (HDX) pattern returned to PFO level. Strong structural perturbations were not observed in case of remaining variants in which other residues of the hydrophobic core of D3 domain were substituted by alanine. Our results indicate the existence in PFO of a well-tuned H-bonding network that maintains the stability of the D3 β-strands at appropriate level at each transformation step. F318 and Y181 moieties participate in this network and their role extends beyond their direct intermolecular interaction during oligomerization that was identified previously.     

How interaction of perfringolysin O with membranes is controlled by sterol structure, lipid structure, and physiological low pH: insights into the origin of perfringolysin O-lipid raft interaction

Perfringolysin O (PFO) is a sterol-dependent, pore-forming cytolysin. To understand the molecular basis of PFO membrane interaction, we studied its dependence upon sterol and lipid structure and aqueous environment. PFO interacted with diverse sterols, although binding was affected by double bond location in the sterol rings, sterol side chain structure, and sterol polar group structure. Importantly, a sterol structure promoting formation of ordered membrane domains (lipid rafts) was not critical for interaction. PFO membrane interaction was also affected by phospholipid acyl chain structure, being inversely related to tight acyl chain packing with cholesterol. Experiments using the pre-pore Y181A mutant demonstrated that sterol binding strength and specificity was not affected by whether PFO forms a transmembrane beta-barrel. Combined, these observations are consistent with a model in which the strength and specificity of sterol interaction arises from both sterol interactions with domain 4 and sterol chemical activity within membranes. The lipid raft-binding portions of sterol bound to PFO may remain largely exposed to the lipid bilayer. These results place important constraints upon the origin of PFO raft affinity. Additional experiments demonstrated that the structure of membrane-inserted PFO at low and neutral pH was similar as judged by the effect of phospholipid and sterol structure upon PFO properties and membrane interaction. However, low pH enhanced PFO membrane binding, oligomerization, and pore formation. In lipid vesicles mimicking the exofacial (outer) membrane leaflet, PFO-membrane binding was maximal at pH 5.5-6. This is consistent with the hypothesis that PFO function involves acidic vacuoles.     

PA63 channel of anthrax toxin: an extended beta-barrel

Anthrax toxin consists of three protein components: protective antigen (PA), lethal factor (LF), and edema factor (EF). PA(63), generated by protease "nicking" of whole PA, is responsible for delivering the toxin's catalytic fragments (LF and EF) to the target cell's cytosol. In planar bilayer membranes, trypsin-nicked PA makes cation-selective voltage-gated channels with a pore diameter of > or =12 A. The channels are presumed to be heptameric "mushrooms", with an extracellular "cap" region and a membrane-inserted, beta-barrel "stem". Although the crystal structure of the water-soluble monomeric form has been resolved to 2.1 A and that of the heptameric "prepore" to 4.5 A, the structure for the membrane-bound channel (pore) has not been determined. We have engineered mutant channels that are cysteine-substituted in residues in the putative beta-barrel, and identified the residues lining the channel lumen by their accessibility to a water-soluble sulfhydryl-specific reagent. The reaction with lumen-exposed cysteinyl side chains causes a drop in channel conductance, which we used to map the residues that line the pore. Our results indicate that the beta-barrel structure extends beyond the bilayer and involves residues that are buried in the monomer. The implication is that major rearrangement of domains in the prepore cap region is required for membrane insertion of the beta-barrel stem.     

Trapping of Vibrio cholerae Cytolysin in the Membrane-bound Monomeric State Blocks Membrane Insertion and Functional Pore Formation by the Toxin

Vibrio cholerae cytolysin (VCC) is a potent membrane-damaging cytolytic toxin that belongs to the family of β barrel pore-forming protein toxins. VCC induces lysis of its target eukaryotic cells by forming transmembrane oligomeric β barrel pores. The mechanism of membrane pore formation by VCC follows the overall scheme of the archetypical β barrel pore-forming protein toxin mode of action, in which the water-soluble monomeric form of the toxin first binds to the target cell membrane, then assembles into a prepore oligomeric intermediate, and finally converts into the functional transmembrane oligomeric β barrel pore. However, there exists a vast knowledge gap in our understanding regarding the intricate details of the membrane pore formation process employed by VCC. In particular, the membrane oligomerization and membrane insertion steps of the process have only been described to a limited extent. In this study, we determined the key residues in VCC that are critical to trigger membrane oligomerization of the toxin. Alteration of such key residues traps the toxin in its membrane-bound monomeric state and abrogates subsequent oligomerization, membrane insertion, and functional transmembrane pore-formation events. The results obtained from our study also suggest that the membrane insertion of VCC depends critically on the oligomerization process and that it cannot be initiated in the membrane-bound monomeric form of the toxin. In sum, our study, for the first time, dissects membrane binding from the subsequent oligomerization and membrane insertion steps and, thus, defines the exact sequence of events in the membrane pore formation process by VCC.     

A Non-classical Assembly Pathway of Escherichia coli Pore-forming Toxin Cytolysin A

Cytolysin A (ClyA) is an α-pore forming toxin from pathogenic Escherichia coli (E. coli) and Salmonella enterica. Here, we report that E. coli ClyA assembles into an oligomeric structure in solution in the absence of either bilayer membranes or detergents at physiological temperature. These oligomers can rearrange to create transmembrane pores when in contact with detergents or biological membranes. Intrinsic fluorescence measurements revealed that oligomers adopted an intermediate state found during the transition between monomer and transmembrane pore. These results indicate that the water-soluble oligomer represents a prepore intermediate state. Furthermore, we show that ClyA does not form transmembrane pores on E. coli lipid membranes. Because ClyA is delivered to the target host cell in an oligomeric conformation within outer membrane vesicles (OMVs), our findings suggest ClyA forms a prepore oligomeric structure independently of the lipid membrane within the OMV. The proposed model for ClyA represents a non-classical pathway to attack eukaryotic host cells.     

Anthrax protective antigen: prepore-to-pore conversion.

PA(63), the active 63 kDa form of anthrax protective antigen, forms a heptameric ring-shaped oligomer that is believed to represent a precursor of the membrane pore formed by this protein. When maintained at pH >/=8.0, this "prepore" dissociated to monomeric subunits upon treatment with SDS at room temperature, but treatment at pH 相似文献   

Evidence for a prepore stage in the action of Clostridium perfringens epsilon toxin

Clostridium perfringens epsilon toxin (ETX) rapidly kills MDCK II cells at 37°C, but not 4°C. The current study shows that, in MDCK II cells, ETX binds and forms an oligomeric complex equally well at 37°C and 4°C but only forms a pore at 37°C. However, the complex formed in MDCK cells treated with ETX at 4°C has the potential to form an active pore, since shifting those cells to 37°C results in rapid cytotoxicity. Those results suggested that the block in pore formation at 4°C involves temperature-related trapping of ETX in a prepore intermediate on the MDCK II cell plasma membrane surface. Evidence supporting this hypothesis was obtained when the ETX complex in MDCK II cells was shown to be more susceptible to pronase degradation when formed at 4°C vs. 37°C; this result is consistent with ETX complex formed at 4°C remaining present in an exposed prepore on the membrane surface, while the ETX prepore complex formed at 37°C is unaccessible to pronase because it has inserted into the plasma membrane to form an active pore. In addition, the ETX complex rapidly dissociated from MDCK II cells at 4°C, but not 37°C; this result is consistent with the ETX complex being resistant to dissociation at 37°C because it has inserted into membranes, while the ETX prepore readily dissociates from cells at 4°C because it remains on the membrane surface. These results support the identification of a prepore stage in ETX action and suggest a revised model for ETX cytotoxicity, i) ETX binds to an unidentified receptor, ii) ETX oligomerizes into a prepore on the membrane surface, and iii) the prepore inserts into membranes, in a temperature-sensitive manner, to form an active pore.     

Membrane-dependent conformational changes initiate cholesterol-dependent cytolysin oligomerization and intersubunit beta-strand alignment

Cholesterol-dependent cytolysins are bacterial protein toxins that bind to cholesterol-containing membranes, form oligomeric complexes and insert into the bilayer to create large aqueous pores. Membrane-dependent structural rearrangements required to initiate the oligomerization of perfringolysin O monomers have been identified, as have the monomer-monomer interaction surfaces, using site-specific mutagenesis, disulfide trapping and multiple fluorescence techniques. Upon binding to the membrane, a structural element in perfringolysin O moves to expose the edge of a previously hidden beta-strand that forms the monomer-monomer interface and is required for oligomer assembly. The beta-strands that form the interface each contain a single aromatic residue, and these aromatics appear to stack, thereby aligning the transmembrane beta-hairpins of adjacent monomers in the proper register for insertion. Collectively, these data reveal a novel membrane binding-dependent mechanism for regulating cytolysin monomer-monomer association and pore formation.     

Role of the amino latch of staphylococcal alpha-hemolysin in pore formation: a co-operative interaction between the N terminus and position 217

Staphylococcal alpha-hemolysin (alphaHL) is a beta barrel pore-forming toxin that is secreted by the bacterium as a water-soluble monomeric protein. Upon binding to susceptible cells, alphaHL assembles via an inactive prepore to form a water-filled homoheptameric transmembrane pore. The N terminus of alphaHL, which in the crystal structure of the fully assembled pore forms a latch between adjacent subunits, has been thought to play a vital role in the prepore to pore conversion. For example, the deletion of two N-terminal residues produced a completely inactive protein that was arrested in assembly at the prepore stage. In the present study, we have re-examined assembly with a comprehensive set of truncation mutants. Surprisingly, we found that after truncation of up to 17 amino acids, the ability of alphaHL to form functional pores was diminished, but still substantial. We then discovered that the mutation Ser(217) --> Asn, which was present in our original set of truncations but not in the new ones, promotes complete inactivation upon truncation of the N terminus. Therefore, the N terminus of alphaHL cannot be critical for the prepore to pore transformation as previously thought. Residue 217 is involved in the assembly process and must interact indirectly with the distant N terminus during the last step in pore formation. In addition, we provide evidence that an intact N terminus prevents the premature oligomerization of alphaHL monomers in solution.     

Structural basis of pore formation by the bacterial toxin pneumolysin

The bacterial toxin pneumolysin is released as a soluble monomer that kills target cells by assembling into large oligomeric rings and forming pores in cholesterol-containing membranes. Using cryo-EM and image processing, we have determined the structures of membrane-surface bound (prepore) and inserted-pore oligomer forms, providing a direct observation of the conformational transition into the pore form of a cholesterol-dependent cytolysin. In the pore structure, the domains of the monomer separate and double over into an arch, forming a wall sealing the bilayer around the pore. This transformation is accomplished by substantial refolding of two of the four protein domains along with deformation of the membrane. Extension of protein density into the bilayer supports earlier predictions that the protein inserts beta hairpins into the membrane. With an oligomer size of up to 44 subunits in the pore, this assembly creates a transmembrane channel 260 A in diameter lined by 176 beta strands.     

Membrane insertion by anthrax protective antigen in cultured cells

The enzymatic moieties of anthrax toxin enter the cytosol of mammalian cells via a pore in the endosomal membrane formed by the protective antigen (PA) moiety. Pore formation involves an acidic pH-induced conformational rearrangement of a heptameric precursor (the prepore), in which the seven 2beta2-2beta3 loops interact to generate a 14-strand transmembrane beta-barrel. To investigate this model in vivo, we labeled PA with the fluorophore 7-nitrobenz-2-oxa-1,3-diazole (NBD) at cysteine residues introduced into the 2beta2-2beta3 loop. Each labeled PA was bound to CHO cells, and NBD fluorescence was monitored over time in stirred cell suspensions or by confocal microscopy. A strong increase was observed with NBD at positions 305, 307, 309, and 311, sites where side chains are predicted to face the bilayer, and little change was seen at residues 304, 306, 308, 310, and 312, sites where side chains are predicted to face the pore lumen. The increase at position 305 was inhibited by membrane-restricted quenchers, low temperature, or various reagents known to affect toxin action. Of the 24 NBD attachment sites examined, all but three gave results qualitatively consistent with the beta-barrel model. Besides supporting the beta-barrel model of membrane insertion, our results describe the time course of insertion and identify PA residues where NBD gives a strong signal upon membrane insertion in vivo.     

Structural insights into the membrane-anchoring mechanism of a cholesterol-dependent cytolysin

Perfringolysin O (PFO), a cytolytic toxin secreted by pathogenic Clostridium perfringens, forms large pores in cholesterol-containing membranes. Domain 4 (D4) of the protein interacts first with the membrane and is responsible for cholesterol recognition. By using several independent fluorescence techniques, we have determined the topography of D4 in the membrane-inserted oligomeric form of the toxin. Only the short hydrophobic loops at the tip of the D4 beta-sandwich are exposed to the bilayer interior, whereas the remainder of D4 projects from the membrane surface and is surrounded by water, making little or no contact with adjacent protein monomers in the oligomer. Thus, a limited interaction of D4 with the bilayer core seems to be sufficient to accomplish cholesterol recognition and initial binding of PFO to the membrane. Furthermore, D4 serves as the fulcrum around which extensive structural changes occur during the formation and insertion of the large transmembrane beta-barrel into the bilayer.     

The staphylococcal alpha-toxin pore has a flexible conformation

The alpha-toxin from Staphylococcus aureus undergoes several conformational changes from the time it is released from the bacterium to the moment it forms a channel in the plasma membrane of its target cell. It is initially a soluble monomer, which undergoes membrane binding and oligomerization into a heptameric ring and finally inserts into the lipid bilayer to form a pore. Here we have analyzed the stability of different forms of the alpha-toxin (monomer as well as heptamers in solution, bound to the membrane and membrane-inserted) by differential scanning calorimetry and limited proteolysis. Data presented here show that, in contrast to both the membrane-bound prepore complex and the monomer in solution, the membrane-inserted alpha-toxin channel does not undergo cooperative unfolding and is highly susceptible to proteases. These observations suggest that the channel has a looser conformation. Interestingly, resistance to proteases could be recovered upon solubilization of the channel, indicating that the loss of rigid tertiary packing only occurred upon membrane insertion. Far-UV CD data, however, suggest that the transmembrane beta-barrel must be stably folded and that therefore only the Cap and Rim domains of the channel are loosely packed. All together, our data show that the alpha-toxin channel is not a rigid complex within the membrane but adopts a rather flexible conformation.     

Perfringolysin O association with ordered lipid domains: implications for transmembrane protein raft affinity

Upon interaction with cholesterol, perfringolysin O (PFO) inserts into membranes and forms a rigid transmembrane (TM) β-barrel. PFO is believed to interact with liquid ordered lipid domains (lipid rafts). Because the origin of TM protein affinity for rafts is poorly understood, we investigated PFO raft affinity in vesicles having coexisting ordered and disordered lipid domains. Fluorescence resonance energy transfer (FRET) from PFO Trp to domain-localized acceptors indicated that PFO generally has a raft affinity between that of LW peptide (low raft affinity) and cholera toxin B (high raft affinity) in vesicles containing ordered domains rich in brain sphingomyelin or distearoylphosphatidylcholine. FRET also showed that ceramide, which increases exposure of cholesterol to water and thus displaces it from rafts, does not displace PFO from ordered domains. This can be explained by shielding of PFO-bound cholesterol from water. Finally, FRET showed that PFO affinity for ordered domains was higher in its non-TM (prepore) form than in its TM form, demonstrating that the TM portion of PFO interacts unfavorably with rafts. Microscopy studies in giant unilamellar vesicles confirmed that PFO exhibits intermediate raft affinity, and showed that TM PFO (but not non-TM PFO) concentrated at the edges of liquid ordered domains. These studies suggest that a combination of binding to raft-associating molecules and having a rigid TM structure that is unable to pack well in a highly ordered lipid environment can control TM protein domain localization. To accommodate these constraints, raft-associated TM proteins in cells may tend to locate within liquid disordered shells encapsulated within ordered domains.