Development of protoplasts of Streptomycetes on media favoring the regeneration and formation of L-forms

The protoplasts of three Streptomyces species and their regenerative ability were studied using light microscopy. When Streptomyces lividans and S. erythraeus protoplasts are cultivated on regeneration media, their regeneration is not synchronous during the first day; some protoplasts revert to yield the mycelial form and also L-forms of these cultures are produced. If the protoplasts are transferred to a medium inducing L-forms, they grow and multiply for a long time with the production of L-form colonies. This process is maintained if S. lividans L-form cells are passaged on the medium inducing L-forms, but the protoplasts revert to yield the mycelial form on the regeneration medium.     

Antibiotic production by variants of Penicillium chrysogenum isolated after protoplast formation and exposure to mutagens at the protoplast stage

A procedure for protoplast formation in the penicillin-producing organism Penicillium chrysogenum was developed. The yield of the protoplasts was high, the protoplasts were stable and capable of regeneration. Two types of the protoplast regeneration were revealed. The spores and protoplasts were treated with UV light and N-nitroso-N'-methyl biuret and their effect on production of the antibiotic by the isolated variants was studied. It was shown that the protoplasts of P. chrysogenum were more liable to the mutagenic effect of UV light and nitroso methyl biuret than the fungus conidia. It is possible to use this specific feature in intensification of selection aimed at isolation of highly productive strains of P. chrysogenum.     

The methods of protoplast formation and transformation of Streptomyces strains

Factors influencing formation, regeneration and transformation of protoplasts in streptomyces are described. Conditions for formation and regeneration of protoplasts in 4 industrial strains producing the macrolide antibiotic tylosin were studied. It was demonstrated possible to apply the method for transformation of the S. lividans type culture to 3 industrial strains of S. griseus producing grisin, an antibiotic used as a feed additive. Potential increasing of the efficiency of protoplast transformation and transfection in various actinomycetous strains including industrial ones is discussed. The stimulating effect of lyposomes on transformation of protoplasts in S. lividans 66 with DNA of plasmids pVG101 and pIJ350 as well as transfection with DNA of phages SH10 and KS404 was shown. The tylosin resistance genes in S. fradiae strain B45 were cloned which enabled isolating the cluster of the genes participating in tylosin biosynthesis.     

Transformation and transfection of anthracycline-producing streptomycetes.

Streptomyces peucetius and Streptomyces strain C5, producers or anthracycline antibiotics, were converted to protoplasts from vegetatively growing mycelia. Conditions are described for maximal protoplast formation (greater than 99%) and for regeneration frequencies of up to 13%. Streptomycete plasmids pIJ61, pIJ702, and pIJ922, from the replicons SLP1, pIJ101, and SCP2, respectively, were isolated from Streptomyces lividans 66 and successfully introduced into S. peucetius and Streptomyces strain C5 by polyethylene glycol-mediated protoplast transformation. Frequencies of up to 10(6) transformations X microgram of plasmid DNA-1 were achieved by these procedures. Analyses showed that the two anthracycline-producing strains can stably harbor the plasmids without deletion of plasmid sequences or loss of the plasmids for several transfers through selective media. Fragments of DNA from S. peucetius ligated into pIJ702 and introduced into Streptomyces strain C5 were stable after several transfers through selective media. Both anthracycline producers also were sensitive to infection and transfection by actinophages KC401 and KC515, clear plaque derivatives of bacteriophage phi C31. Optimal conditions were determined for the transfection of S. peucetius and Streptomyces strain C5 protoplasts with phi C31 KC401 and KC515 DNA with liposome-assisted, polyethylene glycol-mediated protoplast transfection.     

Transformation and transfection of anthracycline-producing streptomycetes

Streptomyces peucetius and Streptomyces strain C5, producers or anthracycline antibiotics, were converted to protoplasts from vegetatively growing mycelia. Conditions are described for maximal protoplast formation (greater than 99%) and for regeneration frequencies of up to 13%. Streptomycete plasmids pIJ61, pIJ702, and pIJ922, from the replicons SLP1, pIJ101, and SCP2, respectively, were isolated from Streptomyces lividans 66 and successfully introduced into S. peucetius and Streptomyces strain C5 by polyethylene glycol-mediated protoplast transformation. Frequencies of up to 10(6) transformations X microgram of plasmid DNA-1 were achieved by these procedures. Analyses showed that the two anthracycline-producing strains can stably harbor the plasmids without deletion of plasmid sequences or loss of the plasmids for several transfers through selective media. Fragments of DNA from S. peucetius ligated into pIJ702 and introduced into Streptomyces strain C5 were stable after several transfers through selective media. Both anthracycline producers also were sensitive to infection and transfection by actinophages KC401 and KC515, clear plaque derivatives of bacteriophage phi C31. Optimal conditions were determined for the transfection of S. peucetius and Streptomyces strain C5 protoplasts with phi C31 KC401 and KC515 DNA with liposome-assisted, polyethylene glycol-mediated protoplast transfection.     

The protoplasts of Acremonium chrysogenum. Biochemical and morphological studies

A procedure for preparing stable A. chrysogenum protoplasts capable of 60 per cent regeneration was developed. Two morphogenetic types of the regeneration were detected. The variants isolated after the protoplast regeneration were characterized by wide ranges of morphological variation. Capacity for the antibiotic production varied from 60 to 160 per cent of the activity of the starting strain. A procedure for isolating functionally active mitochondria from protoplasts of A. chrysogenum was also developed. Their main bioenergetic parameters were studied. In the respiratory chain of the A. chrysogenum mitochondria there were detected three conjugation sites of oxidative phosphorylation.     

Protoplast isolation and regeneration in Streptomyces clavuligerus

The regeneration of streptomycete protoplasts is a major step following genetic manipulations such as fusion and DNA-mediated transformation. Reports of studies on the regeneration of protoplasts from Streptomyces clavuligerus are limited and for this reason the experiments described in this paper were carried out. An investigation of protoplast formation and cytology was made to gain further insight into the loss of protoplast viability in osmotically stabilized support media. Protoplasts with the highest regeneration frequency were isolated from mycelium, grown in a two-stage culture system (without glycine), using lysozyme dissolved in a sucrose osmoticum containing 1% bovine serum albumin. The latter promoted improved protoplast viability. A systematic survey was made of the components of regeneration medium R5, previously used for S. clavuligerus, and other potentially advantageous components and conditions, in an attempt to raise the regeneration frequency of the protoplasts. An improved regeneration medium (R6) and protocol which supported higher and more consistent levels of regeneration of S. clavuligerus protoplasts resulted from these experiments. These improved procedures for protoplast isolation and regeneration proved to be suitable for other streptomycete species.     

Cloning of antibiotic resistance and nutritional genes in streptomycetes.

Methodology which allows consistent shotgun cloning of streptomycete genes is presented. Parameters that increase transformation efficiency of Streptomyces lividans 66 were adjusted to generate reproducibly a population of cloned genes likely to represent the entire genome. Factors which influence the recovery of viable transformants include: growth phase of the mycelium, ionic and osmotic characteristics of the medium during protoplast formation and transformation, and moisture content and protoplast density during regeneration. A modified transformation procedure was devised which increased transformation frequency more than 20-fold (allowing up to 10(7) primary transformants per microgram of SLP1.2 covalently closed circular DNA) and greatly facilitated the cloning of drug resistance genes and biosynthetic genes, using one of two plasmid vectors. Viomycin resistance genes on BamHI or PstI fragments were cloned from S. vinaceus genomic DNA into S. lividans, using the SLP1.2 vector. At least three different S. vinaceus BamHI fragments (1.9, 5.8, or 8.5 kilobases) confer viomycin resistance; only one PstI fragment (4.3 kilobases) was found. Recombinant plasmids were all able to produce lethal zygosis and to be transferred by conjugation within S. lividans. SCP2 was used to clone S. coelicolor A3(2) genes that "complemented" the auxotrophic mutation hisD3, argA1, or guaA1. Recombinant DNA technology can now be applied to economically and academically interesting problems unique to streptomycete molecular biology.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Efficient plasmid transformation of the beta-lactam producer Streptomyces clavuligerus.

The conditions for optimal formation and regeneration of protoplasts of Streptomyces clavuligerus were established. The optimal temperature for regeneration of protoplasts and for transformation was 26 degrees C in three different regeneration media. The best efficiency of transformation was obtained with 40% polyethylene glycol 1000. The efficiencies of regeneration and transformation increased greatly when protoplasts were obtained from cultures in the early stationary phase of growth. The number of transformants per assay increased linearly with rising concentrations of protoplasts. However, the number of transformants per protoplast decreased at concentrations of protoplasts above 1.5 X 10(9). The total number of transformants rose linearly at increasing plasmid DNA concentrations, but the number of the transformants per microgram of DNA became constant at concentrations above 1 microgram of DNA. Transformation frequencies as high as 5 X 10(5) transformants per microgram of DNA were obtained when plasmid pIJ702 was isolated from S. clavuligerus but not when isolated from Streptomyces lividans.     

Factors affecting protoplast formation and regeneration by four species of Streptomyces

Four species of Streptomyces, Streptomyces canescens, S. limosus, S. griseus and S. griseolus , were used to study the effects of glycerine and gelatin on the formation and regeneration of protoplasts. For each species efficient protoplast formation with high protoplast concentrations and low levels of non-protoplast units was obtained with mycelia grown in medium without glycerine. The low regeneration frequencies of protoplasts of S. canescens and S. limosus on R2 medium were increased substantially by the addition of 1% gelatin. The use of single colonies, rather than spores, to establish mycelial cultures was found routinely to produce good protoplast preparations.     

Preparation and Regeneration of Mycelial Protoplasts of Alternaria eichhomiae

Preparation and regeneration of mycelial protoplasts from Alternaria eichhorniae were examined. A commercially available muralytic enzyme, Novozym 234, was used for isolation of protoplasts. The mycelial age and the pH of the stabilized buffer affected the formation of protoplasts. The maximum production of protoplasts (3,9 × 10⁸/g fresh weight mycelia) was obtained from 24-h-old mycelia digested with Novozym 234 (20 mg/ml) in a stabilized buffer of pH 6.4 and incubated in the dark at 30°C on a rotary shaker (90 r.p.m.) for 6 h. Morphological characteristics of the protoplasts varied and depended on the age of the mycelia used in protoplast production. Moreover, mycelial age had a highly significant influence (P = 0.0001) on the frequency of protoplast regeneration.     

γ-亚麻酸生产菌深黄被孢霉原生质作的形成和再生

采用2％的溶壁酶加4％的蜗牛酶,从深黄被孢霉的菌丝中获得了大量的原生质体。同时对菌丝的培养时间、渗透压稳定剂、酶解系统和酶解温度等因素进行了系统的观察,从而获得了制备深黄被孢霉原生质体的最适条件。并对该原生质体在高渗培养基上进行了再生实验,其再生率为32％。     

Experimental inhibition of cell wall formation and of reversion inNadsonia elongata andSchizosaccharomyces pombe protoplasts

Summary The growth, cell wall regeneration, and the reversion of the protoplasts ofNadsonia elongata andSchizosaccbaromyces pombe cultivated in nutrient media containing snail enzyme was studied by light and electron microscopy. The protoplasts grew in the presence of snail enzyme and an incomplete cell wall composed of fibrils was formed on their surface. Thus, the presence of snail enzyme inhibited the completion of cell wall structure and, consequently, the reversion of the protoplasts to normal cells. The transfer of these protoplasts to medium free from snail enzyme led first to the completion of the cell wall and then to the reversion of the protoplasts to normal cells. The reported experiments confirmed that the regeneration of the complete cell wall preceded the protoplast reversion.     

Cytologic control of protoplast formation and regeneration in Streptomyces erythraeus, strain BTCC-2

Experiments on protoplast formation and regeneration in S. erythraeus, strain BTCC-2 (Saccharopolyspora erythrae) were performed under microscopic control at all the stages. It was shown that the highest protoplast titer was provided by the mycelium grown in one step in the absence of glycine. For characterizing the protoplasts formed by the mycelium grown under different conditions, their regeneration capacity was estimated by microscopic examination of the protoplasts after 15-20-hour growth in microchambers and evaluation of the regeneration efficiency 7-10 hours later. Of interest was the fact of spontaneous development of colonies consisting of the protoplast-like cells (L-cells) in 15-20 hours. Such colonies were formed only by the protoplasts grown from the mycelium incubated in one step in the absence of glycine or in the presence of 0.1 per cent of glycine. Such conditions provided also the maximum efficiency of the protoplast regeneration. The long-term storage of protoplasts led to a decrease in their viability.     

Formation and regeneration of protoplasts in Sclerotium rolfsii ATCC 201126

AIMS: Different cultural conditions for forming and reverting protoplasts were systematically studied to establish a rapid and efficient protocol for Sclerotium rolfsii ATCC 201126. METHODS AND RESULTS: Osmotic stabilizer, lytic enzymes and mycelial age were the main factors influencing protoplast yields. An optimized protocol involving 1-h hydrolysis of 45-h-old mycelium with Trichoderma harzianum enzymes in a 1 : 1 (w/w) biomass : enzyme ratio and 0.6 mol l-1 MgSO4 as osmotic stabilizer was designed to produce approx. 2 x 109 protoplasts per gram biomass dry weight, with 99% viability. Differences on the lytic activity between batches of commercial enzymes were clearly evidenced. Protoplast release was highly efficient showing no remaining cell wall material as witnessed by fluorescent brightener 28. Up to 26% of purified protoplasts developed into the typical filamentous form after 50 h of incubation on 0.6 mol l-1 sucrose agar media. CONCLUSIONS: The methodology herein proposed allowed a rapid, inexpensive and efficient protoplast production. Optimum yields were higher or in the order of that elsewhere reported for other S. rolfsii strains and the required lytic time was significantly shorter. Purified protoplasts successfully reverted to the filamentous morphology. SIGNIFICANCE AND IMPACT OF THE STUDY: The present research reports the former protocol for the isolation and reversion of protoplasts in S. rolfsii ATCC 201126 providing key factors to ensure optimum results. In addition, the described procedure constitutes a starting point for downstream genetic manipulation.     

Isolation of Staphylococcus aureus protoplasts using lysoamidase

The effect of the bacteriolytic enzyme preparation, lysoamidase, on Staphylococcus aureus 209P cells was studied. The protoplast formation was examined by spectrophotometric, biochemical and electron microscopic methods. Optimal conditions for isolation of S. aureus protoplasts were chosen. The susceptibility of S. aureus cells to lysoamidase depended on the culture age: the maximum effect was observed in the logarithmic growth phase. The protoplast yield was 80% when 1 M sucrose was used as an osmotic stabilizer. Lysoamidase caused local disruptures of the staphylococcus cell walls, which resulted in the formation of osmotically fragile spheroplasts and the release of protoplasts into the medium. The protoplasts obtained could retain 85-90% of the respiration activity and were able of cell wall regeneration.     

凤尾菇和香菇原生质体非对称融合

The protoplasts of auxotrophic mutant monokaryon of Pleurotus. Sajor-caju was used as recipient parenL the protoplasts of wild dikareon of Lentinus edodes were heat-inactivated and used as nuclear donor parent. The fusants of two parents showed some their individual characteristics and physiological difference between themselves. Thrugh protoplast re-isolation and reversion of one randomly selective fusant, two parents had been recovered and the donor parent achieved some new physiological characteristics su…     

Selection of the optimal conditions for the procurement and regeneration of protoplasts of the industrial strain of Streptomyces rimosus, the producer of oxytetracycline, and the effect of the protoplasting process on the antibiotic activity]

Optimal conditions for protoplasting of the Streptomyces rimosus industrial strain No. 1 producing oxytetracycline were developed. Observation of the early stages of the protoplast regeneration in microchambers showed that there were two regeneration types: normal and anomalous. The latter was likely defined by the glycine effect on cell wall synthesis. It was accompanied by the stage in which the protoplasts had the form of multiplying protoplast-like cells. The protoplasting of the S. rimosus culture producing oxytetracycline resulted in an increase in the variability of an antibiotic producing property and the frequency of low active variants.     

Plant regeneration from mesophyll protoplasts of Solanum commersonii dun

Somatic fusion of Solanum commersonii, a frost tolerant wild potato species not crossable with Solanum tuberosum, relies on the possibility to isolate and culture protoplasts. This study was conducted to determine whether protoplasts could be isolated and plants regenerated in three S. commersonii accessions. Shoot cultures for protoplast isolation were maintained on Murashige and Skoog medium. Mesophyll protoplasts were isolated and cultured using a protocol originally described for S. tuberosum with some modifications. Differences were evident among the three accessions for protoplast yield, plating efficiency and regeneration frequency. Protoplast yield ranged from 3.0 to 8.5 × 10⁶ protoplasts per g of fresh tissue. At 1–2 × 10⁴ protoplasts ml⁻¹, which was the optimal plating density, 10–20% of plated protoplasts gave multicellular colonies. Regeneration of shoots was observed in two accessions only, the maximum regeneration frequency being 66%. In one of these accessions the reduction of sucrose concentration in regeneration media improved the regeneration frequency from 14 to 35%. About three hundred plants were rooted in vitro and successfully transferred to soil.