Evaluation of TFAM and FABP4 gene polymorphisms in three lines of Nellore cattle selected for growth

We analyzed the polymorphisms TFAM HaeIII, TFAM MboI and FABP4 MspA1I in three Nellore lines selected for growth in order to evaluate how selection affects the frequencies of these polymorphisms and evaluate their association with growth and carcass traits in Zebu cattle. Birth, weaning and yearling weights, rump height, longissimus muscle area, backfat thickness, and rump fat thickness were analyzed. The sample was constituted of animals from two lines selected for yearling weight (NeS and NeT), and a control line (NeC), established in 1980, at the S?o Paulo Instituto de Zootecnia. Two hundred and seventy-two heifers were genotyped for TFAM gene SNPs, and 325 heifers were genotyped for the FABP4 SNP. High frequencies were observed for the alleles A (TFAM HaeIII), C (TFAM MboI) and C (FABP4 MspA1I). Significant differences in allele frequencies between NeS and NeT were observed for the TFAM HaeIII, and between the line NeT and lines NeC and NeS for the FABP4 MspA1I SNP. Five haplotypes were observed for the two polymorphisms in the TFAM gene, haplotype AACC being the most frequent. None of the markers separately or according to haplotype was significantly associated with the growth and carcass traits. The low frequencies of alleles that are associated with high marbling scores and thick subcutaneous fat in taurine breeds might explain the low means for these traits in Nellore cattle.     

Genetic Variation in FABP4 and Evaluation of Its Effects on Beef Cattle Fat Content

FABP4 is a protein primarily expressed in adipocytes and macrophages that plays a key role in fatty acid trafficking and lipid hydrolysis. FABP4 gene polymorphisms have been associated with meat quality traits in cattle, mostly in Asian breeds under feedlot conditions. The objectives of this work were to characterize FABP4 genetic variation in several worldwide cattle breeds and evaluate possible genotype effects on fat content in a pasture-fed crossbred (Angus-Hereford-Limousin) population. We re-sequenced 43 unrelated animals from nine cattle breeds (Angus, Brahman, Creole, Hereford, Holstein, Limousin, Nelore, Shorthorn, and Wagyu) and obtained 22 single nucleotide polymorphisms (SNPs) over 3,164?bp, including four novel polymorphisms. Haplotypes and linkage disequilibrium analyses showed a high variability. Five SNPs were selected to perform validation and association studies in our crossbred population. Four SNPs showed well-balanced allele frequencies (minor frequency?>?0.159), and three showed no significant deviations from Hardy-Weinberg proportions. SNPs showed significant effects on backfat thickness and fatty acid composition (P?相似文献   

Genetic Variants in SDC3 Gene are Significantly Associated with Growth Traits in Two Chinese Beef Cattle Breeds

Identification of the genes and polymorphisms underlying quantitative traits, and understanding these genes and polymorphisms affect economic growth traits, are important for successful marker-assisted selection and more efficient management strategies in commercial cattle (Bos taurus) population. Syndecan-3 (SDC3), a member of the syndecan family of type I transmembrane heparan sulfate proteoglycans is a novel regulator of feeding behavior and body weight. The aim of this study is to examine the association of the SDC3 polymorphism with growth traits in Chinese Jiaxian and Qinchuan cattle breeds (). Four single nucleotide polymorphisms (SNPs: 1–4) were detected in 555 cows from three Chinese native cattle breeds by means of sequencing pooled DNA samples and polymerase chain reaction-single stranded conformational polymorphism (PCR-SSCP) methods. We found one SNP (g.28362A > G) in intron and three SNPs (g.30742T > G, g.30821C > T and 33418 A > G) in exons. The statistical analyses indicated that these SNPs of SDC3 gene were associated with bovine body height, body length, chest circumference, and circumference of cannon bone (P < 0.05). The mutant-type variant was superior for growth traits; the heterozygote was associated with higher growth traits compared to wild-type homozygote. Our result confirms the polymorphisms in the SDC3 gene are associated with growth traits that may be used for marker-assisted selection in beef cattle breeding programs.     

Nucleotide variability and linkage disequilibrium patterns at the porcine FABP5 gene

Fatty acid binding protein 5 (FABP5) is a major positional and physiological candidate gene for the porcine FAT1 QTL on SSC4. Here we characterize the nucleotide polymorphism and haplotype variability of FABP5 and we compare it with that of FABP4, given their close physical location and similar metabolic roles. DNA resequencing of the FABP5 gene region in 29 pigs from 14 breeds and in European and Japanese wild boars revealed 36 polymorphisms in 5.2 kb, and a nucleotide diversity of 0.19%, comparable to values reported in other domestic species but sixfold lower than that previously found for FABP4. Remarkably, both the nucleotide variability and the haplotype structure of FABP5 and FABP4 were dramatically different, and the Hudson-Kreitman-Aguadé test was highly significant. Nevertheless, both genes also had similarities. The neighbour-joining trees of their haplotypes did not show a geographical arrangement for any of the genes. Besides, both genes presented a similar extent and pattern of linkage disequilibrium. Haplotype blocks did not extend for large stretches ( approximately 1 kb in both genes), and the number of tag SNPs required to capture all variability was higher than previously expected. Our findings indicate that FABP4 and FABP5 have undergone different selective or evolutive processes. The fact that haplotype blocks were so small may require us to increase the number of SNPs in prospective whole-genome association studies in the pig.     

Genome-wide association study identifies loci and candidate genes for meat quality traits in Simmental beef cattle

Improving meat quality is the best way to enhance profitability and strengthen competitiveness in beef industry. Identification of genetic variants that control beef quality traits can help breeders design optimal breeding programs to achieve this goal. We carried out a genome-wide association study for meat quality traits in 1141 Simmental cattle using the Illumina Bovine HD 770K SNP array to identify the candidate genes and genomic regions associated with meat quality traits for beef cattle, including fat color, meat color, marbling score, longissimus muscle area, and shear force. In our study, we identified twenty significant single-nucleotide polymorphisms (SNPs) (p < 1.47 × 10^?6) associated with these five meat quality traits. Notably, we observed several SNPs were in or near eleven genes which have been reported previously, including TMEM236, SORL1, TRDN, S100A10, AP2S1, KCTD16, LOC506594, DHX15, LAMA4, PREX1, and BRINP3. We identified a haplotype block on BTA13 containing five significant SNPs associated with fat color trait. We also found one of 19 SNPs was associated with multiple traits (shear force and longissimus muscle area) on BTA7. Our results offer valuable insights to further explore the potential mechanism of meat quality traits in Simmental beef cattle.     

Subcellular Localization and Polymorphism of Bovine FABP4 in Bovine Intramuscular Adipocytes

Fatty acid binding protein 4 (FABP4) I74 V, a gene polymorphism associated with unsaturated fatty acid contents, was discovered in Japanese Black cattle. Individuals with FABP4 I/I genotype contain a significantly high level of palmitoleic acid compared to those with FABP4 V/V genotype. It remains unknown how the FABP4 polymorphism leads to different palmitoleic acid contents.

We overexpressed FABP4 of different genotypes in bovine intramuscular preadipocytes and examined whether the intracellular localization of FABP4 and the expression levels of lipid metabolism-related genes were different among cells expressing different genotypes. Nuclear localization was observed for the FABP4 V/V, while the FABP4 I/I almost did not. The cells expressing FABP4 of different genotypes were comparable in terms of the expression levels of genes involved in lipid metabolism. FABP4 I/I was localized in most of the lipid droplets 4 days after differentiation induction, whereas approximately 25% lipid droplet co-localized with FABP4 in cells expressing FABP4 V/V. The lipid droplet size increased when palmitoleic acid was added compared to the size observed when palmitic acid was added. These results suggest that lipid droplet enlargement caused by palmitoleic acid and genotype-dependent differences in the fatty acid transporting capacity underlie variations in palmitoleic acid content among FABP4 polymorphisms.     

Association of five candidate genes with fatty acid composition in Korean cattle

Fatty acid composition of meat is becoming more important due to consumer demand for high quality and healthy foods. The present study evaluated the associations of five candidate genes (FABP4, FASN, NR1H3, GH and SCD) with fatty acid composition in Korean cattle (Hanwoo). The g.3691G > A single nucleotide polymorphism (SNP) in the FABP4 gene had significant effects on high myristic acid (C14:0; P < 0.01) and palmitic (C16:0; P < 0.05) in animals having the GG genotype, and high arachidonic acid (C20:4; P < 0.05) in the AA genotype of Hanwoo. The FASN SNP at position g.17924G > A was also significantly associated with myristic acid (P < 0.01). In case of the SCD gene, a significant effect was only observed in myristoleic acid (C14:1; P < 0.01). However, SNPs in GH and NR1H3 genes showed no effects on fatty acid composition. The results indicate that SNPs in three candidate genes, FABP4, FASN and SCD, may be influential in breeding design for fatty acid composition in Hanwoo.     

Genetic Variants in ADD1 Gene and their Associations with Growth Traits in Cattle

The α-adducin (ADD1) is a subunit of adducin which is a cytoskeleton heterodimeric protein. Adducin participates in oocytes chromosome meiosis of mice, prompting adducin has an effect on embryonic development. Adducin gene mutation has significantly functional change. So the present study was to identify and characterize polymorphisms within the coding region of the bovine ADD1 gene among different cattle breeds. Here, 11 novel single nucleotide polymorphisms (SNPs 1–11) were identified by DNA sequencing and polymerase chain reaction-single stranded conformational polymorphism, there were one synonymous mutation in exon 1 (SNP1); four missense mutations in exons 4, 7, and 8 (SNPs 3–6); and six mutations in introns 4, 12, 13, and 14 (SNPs 2, 7–10). The statistical analyses indicated that the some SNPs are associated with the growth traits (body length, body height, chest circumference, and hucklebone width) in Chinese Jiaxian cattle population. Our results provide evidence that polymorphisms in the ADD1 gene are associated with growth traits, and may be used for marker-assisted selection in beef cattle breeding program.     

Discovery, characterization and validation of single nucleotide polymorphisms within 206 bovine genes that may be considered as candidate genes for beef production and quality

A large number of putative single nucleotide polymorphisms (SNPs) have been identified from the bovine genome-sequencing project. However, few of these have been validated and many will turn out to be sequencing artefacts or have low minor allele frequencies. In addition, there is little information available on SNPs within coding regions, which are likely to be responsible for phenotypic variation. Therefore, additional SNP discovery is necessary to identify and validate polymorphisms both in specific genes and genome-wide. Sequence-tagged sites within 286 genes were resequenced from a panel of animals representing a wide range of European cattle breeds. For 80 genes, no polymorphisms were identified, and 672 putative SNPs were identified within 206 genes. Fifteen European cattle breeds (436 individuals plus available parents) were genotyped with these putative SNPs, and 389 SNPs were confirmed to have minor allele frequencies above 10%. The genes containing SNPs were localized on chromosomes by radiation hybrid mapping and on the bovine genome sequence by Blast . Flanking microsatellite loci were identified, to facilitate the alignment of the genes containing the SNPs in relation to mapped quantitative trait loci. Of the 672 putative SNPs discovered in this work, only 11 were found among the validated SNPs and 100 were found among the approximately 2.3 million putative SNPs currently in dbSNP. The genes studied in this work could be considered as candidates for traits associated with beef production and the SNPs reported will help to assess the role of the genes in the genetic control of muscle development and meat quality. The allele frequency data presented allows the general utility of the SNPs to be assessed.     

Genetic variants of the <Emphasis Type="Italic">FABP4</Emphasis> gene are associated with marbling scores and meat quality grades in Hanwoo (Korean cattle)

This study was aimed to search new genetic variants in the bovine FABP4 gene as molecular markers for meat quality and carcass traits. PCR–RFLP analysis revealed that three SNPs located at nucleotide positions g.2834C>G, g.3533T>A, and g.3691G>A were identified based on a GenBank accession number (NC_007312.4). Sequence analysis revealed that SNPs were located in intron 1 (g.2834C>G) and 2 (g.3533T>A), and an exon 3 (g.3691G>A), showing allele frequencies as 0.592, 0.579, and 0.789, respectively. Genetic variabilities of heterozygosity (He) and polymorphic information contents (PIC) were estimated for g.2834C>G (0.608 and 0.531), g.3533T>A (0.615 and 0.539), and g.3691G>A (0.498 and 0.401) loci, respectively. A SNP located in the exon 3 of FABP4 was characterized and associated with desirable increases of MS (marbling scores) and MG (meat quality grades) in Hanwoo. The statistical analysis revealed that additive effects by GG genotypes in g.3691G>A SNP were significantly greater than AA genotypes in MS and MG traits. These findings suggest that the FABP4g.3691G>A SNP will be a useful candidate locus to maximize economic benefits for cattle populations.     

Novel single nucleotide polymorphisms of the bovine methyltransferase 3b gene and their association with meat quality traits in beef cattle

DNA methylation is essential for adipose deposition in mammals. We screened SNPs of the bovine DNA methyltransferase 3b (DNMT3b) gene in Snow Dragon beef, a commercial beef cattle population in China. Nine SNPs were found in the population and three of six novel SNPs were chosen for genotyping and analyzing a possible association with 16 meat quality traits. The frequencies of the alleles and genotypes of the three SNPs in Snow Dragon beef were similar to those in their terminal-paternal breed, Wagyu. Association analysis disclosed that SNP1 was not associated with any of the traits; SNP2 was significantly associated with lean meat color score and chuck short rib score, and SNP3 had a significant effect on dressing percentage and back-fat thickness in the beef population. The individuals with genotype GG for SNP2 had a 25.7% increase in lean meat color score and a 146% increase in chuck short rib score, compared with genotype AA. The cattle with genotype AG for SNP3 had 35.7 and 24% increases in dressing percentage and 28.8 and 29.2% increases in back-fat thickness, compared with genotypes GG and AA, respectively. Genotypic combination analysis revealed significant interactions between SNP1 and SNP2 and between SNP2 and SNP3 for the traits rib-eye area and live weight. We conclude that there is considerable evidence that DNMT3b is a determiner of beef quality traits.     

Prospecting candidate SNPs for backfat in Canchim beef cattle

Canchim is a composite cattle breed developed in Brazil for beef production. One of the breeding objectives is to increase fat deposition. QTLs for fat thickness and/or marbling have been reported on BTA4 and BTA14. The IGFBP3 and DDEF1 genes, mapped to BTA4 and BTA14, respectively, affect adipogenesis. We looked for SNPs in the IGFBP3 and DDEF1 genes that could be associated with backfat thickness in Canchim beef cattle. For SNP identification, sires with the highest accuracy were ranked according to expected breeding value for fat thickness; the 12 extremes (six sires with the highest and six with the lowest expected breeding value for the trait) were chosen. Six regions of the IGFBP3 and 14 regions of the DDEF1 were sequenced using the Sanger method. Nine SNPs were identified in IGFBP3 and 76 in the DDEF1. After an initial analysis, two SNPs were selected to be genotyped for the whole population; these were DDEF1g.279401A>G and IGFBP3c.4394T>C(Trp>Arg). We found a significant effect (P ≤ 0.05) of allele substitution on backfat thickness; however, the IGFBP3 SNP did not significantly affect this trait.     

Whole-Genome Resequencing Analysis of Hanwoo and Yanbian Cattle to Identify Genome-Wide SNPs and Signatures of Selection

Over the last 30 years, Hanwoo has been selectively bred to improve economically important traits. Hanwoo is currently the representative Korean native beef cattle breed, and it is believed that it shared an ancestor with a Chinese breed, Yanbian cattle, until the last century. However, these two breeds have experienced different selection pressures during recent decades. Here, we whole-genome sequenced 10 animals each of Hanwoo and Yanbian cattle (20 total) using the Illumina HiSeq 2000 sequencer. A total of approximately 3.12 and 3.07 billion sequence reads were mapped to the bovine reference sequence assembly (UMD 3.1) at an average of approximately 10.71- and 10.53-fold coverage for Hanwoo and Yanbian cattle, respectively. A total of 17,936,399 single nucleotide polymorphisms (SNPs) were yielded, of which 22.3% were found to be novel. By annotating the SNPs, we further retrieved numerous nonsynonymous SNPs that may be associated with traits of interest in cattle. Furthermore, we performed whole-genome screening to detect signatures of selection throughout the genome. We located several promising selective sweeps that are potentially responsible for economically important traits in cattle; the PPP1R12A gene is an example of a gene that potentially affects intramuscular fat content. These discoveries provide valuable genomic information regarding potential genomic markers that could predict traits of interest for breeding programs of these cattle breeds.     

Association between Expression Quantitative Trait Loci and Metabolic Traits in Two Korean Populations

Most genome-wide association studies consider genes that are located closest to single nucleotide polymorphisms (SNPs) that are highly significant for those studies. However, the significance of the associations between SNPs and candidate genes has not been fully determined. An alternative approach that used SNPs in expression quantitative trait loci (eQTL) was reported previously for Crohn’s disease; it was shown that eQTL-based preselection for follow-up studies was a useful approach for identifying risk loci from the results of moderately sized GWAS. In this study, we propose an approach that uses eQTL SNPs to support the functional relationships between an SNP and a candidate gene in a genome-wide association study. The genome-wide SNP genotypes and 10 biochemical measures (fasting glucose levels, BUN, serum albumin levels, AST, ALT, gamma GTP, total cholesterol, HDL cholesterol, triglycerides, and LDL cholesterol) were obtained from the Korean Association Resource (KARE) consortium. The eQTL SNPs were isolated from the SNP dataset based on the RegulomeDB eQTL-SNP data from the ENCODE projects and two recent eQTL reports. A total of 25,658 eQTL SNPs were tested for their association with the 10 metabolic traits in 2 Korean populations (Ansung and Ansan). The proportion of phenotypic variance explained by eQTL and non-eQTL SNPs showed that eQTL SNPs were more likely to be associated with the metabolic traits genetically compared with non-eQTL SNPs. Finally, via a meta-analysis of the two Korean populations, we identified 14 eQTL SNPs that were significantly associated with metabolic traits. These results suggest that our approach can be expanded to other genome-wide association studies.     

Association between fatty acid compositions and genotypes of FABP4 and LXR-alpha in Japanese Black cattle

Background

Single nucleotide polymorphisms (SNPs) and small insertions or deletions (indels) are the most common type of polymorphisms and are frequently used for molecular marker development. Such markers have become very popular for all kinds of genetic analysis, including haplotype reconstruction. Haplotypes can be reconstructed for whole chromosomes but also for specific genes, based on the SNPs present. Haplotypes in the latter context represent the different alleles of a gene. The computational approach to SNP mining is becoming increasingly popular because of the continuously increasing number of sequences deposited in databases, which allows a more accurate identification of SNPs. Several software packages have been developed for SNP mining from databases. From these, QualitySNP is the only tool that combines SNP detection with the reconstruction of alleles, which results in a lower number of false positive SNPs and also works much faster than other programs. We have build a web-based SNP discovery and allele detection tool (HaploSNPer) based on QualitySNP.

Results

HaploSNPer is a flexible web-based tool for detecting SNPs and alleles in user-specified input sequences from both diploid and polyploid species. It includes BLAST for finding homologous sequences in public EST databases, CAP3 or PHRAP for aligning them, and QualitySNP for discovering reliable allelic sequences and SNPs. All possible and reliable alleles are detected by a mathematical algorithm using potential SNP information. Reliable SNPs are then identified based on the reconstructed alleles and on sequence redundancy.

Conclusion

Thorough testing of HaploSNPer (and the underlying QualitySNP algorithm) has shown that EST information alone is sufficient for the identification of alleles and that reliable SNPs can be found efficiently. Furthermore, HaploSNPer supplies a user friendly interface for visualization of SNP and alleles. HaploSNPer is available from http://www.bioinformatics.nl/tools/haplosnper/.     

Epistatic effect between ACACA and FABP2 gene on abdominal fat traits in broilers

Epistasis is generally defined as the interaction between two or more genes or their mRNA or protein products to influence a single trait. Experimental evidence suggested that epistasis could be important in the determination of the genetic architecture of complex traits in domestic animals. Acetyl-coenzyme A carboxylase alpha (ACACA) and fatty acid binding protein 2 (FABP2) are both key factors of lipogenesis and transport. They may play a crucial role in the weight variability of abdominal adipose tissue in the growing chicken. In this study, the polymorphisms of c.2292GA in ACACA and c.-561AC in FABP2 were detected among individuals from two broiler lines which were divergently selected for abdominal fat content. Epistasis between the two SNPs on abdominal fat weight (AFW) and abdominal fat percentage (AFP) was analyzed. The additive × additive epistatic components between these two SNPs were found significant or suggestively significant on both AFW and AFP in lean lines of the 9th and 10th generation; whereas, it was not significantly associated with either AFW or AFP in fat lines. At the same time, there were not any other significant epistatic components found in both generations or in both lines. Significant epistatic effects between these two SNPs found only in the lean lines could partly be due to the fact that the abdominal fat traits in these two experimental lines have been greatly modified by strong artificial selection. The results suggested that the epistasis mode may be different between the lean and fat chicken lines. Our results could be helpful in further understanding the genetic interaction between candidate genes contributing to phenotypic variation of abdominal fat content in broilers.