Factors affecting protoplast yield of the carrageenophyte Solieria filiformis (Gigartinales,Rhodophyta)

Summary The effect of age, pH of the culture medium, pre-treatment of tissues, enzymes sources and enzymatic adaptability of phycophages fed with a monospecific diet were analyzed on the protoplast yields of the red seaweed Solieria filiformis (Kützing) Gabrielson. New apices from fast growing plants showed the highest protoplast yields. The protoplast yield decreased when the pH of the culture medium increased from 6.0 to 9.0. Crude extracts from the abalone Haliotis coccinea canariensis Nordsieck, fed with Solieria filiformis thalli for three months in combination with cellulysin, released the highest number of viable cells and protoplasts. Yields ranged from 1.0 to 8.5 x 10⁶ protoplasts per gram of fresh weight.Abbreviations AAP abalone acetone powder - Bis-Tris Bis(2hydroxyethyl)imino-tris(hydroxymethyl)methane - CMC carboxymethyl cellulose - EDTA ethylenediaminetetraacetic acid - EGTA ethylene glycol-bis(ß-aminoethyl ether) NNNN-tetraacetic acid - FDA fluorescein diacetate - FW fresh weight - Hepes N-2-hydroxyethylpiperazine-N-2-ethanesulfonic acid - Tris Tris(hydroxymethyl)aminomethane     

Protoplast isolation and regeneration in the marine red alga Porphyra nereocystis

We have developed a method for isolating viable protoplasts from the blade phase of the epiphytic marine red alga Porphyra nereocystis Anderson, using a two-step enzymatic digestion with commercially available enzymes. The first step uses papain, the second step uses abalone acetone powder. The method is rapid and gives a high yield of viable protoplasts. In liquid culture in enriched seawater medium, the protoplasts can undergo regeneration along three pathways: they directly form filaments resembling the conchocelis phase of Porphyra; they form calli with relatively thick-walled, pigmented cells; and they indirectly form blades from the edges of these calli. Porphyra nereocystis protoplasts also may serve as an alternative propagation method in aquaculture and be useful for studies of cell-wall formation, cell division, and thallus differentiation. They may also be used in somatic selection, somatic hybridization and gene-transfection experiments.Abbreviations AAP abalone acetone powder - PAP papain - FDA fluorescein diacetate This paper is dedicated to the memory of the late Dr. Munenao Kurogi (1921–1988), Professor Emeritus of Hokkaido UniversityThis research was supported by the Washington Sea Grant Program (National Oceanic and Atmospheric Administration). We thank Professor Y. Fujita (Nagasaki University, Japan), Professor S.-J. Wang (Shanghai University of Fisheries, P.R. China) and Dr. H. Kito (Seikai Regional Fisheries Research Laboratory, Nagasaki, Japan) for sharing their experience with Porphyra protoplast production with us. We thank J.S. Charleston for expert technical assistance in preparation of the electron-microscopy specimens. We also thank Dr. S.K. Herbert and John Carrier (Friday Harbor Laboratories) and Dr. John Merrill and D. Gillingham (American Sea Vegetable Co. and Applied Algal Research, Seattle) for collections of P. nereocystis.     

Preparation of protoplasts from Laminaria japonica using native and recombinant abalone alginate lyases

Laminaria japonica protoplasts were released with high yields using the abalone alginate lyase HdAly in combination with a cellulase and chelating agents. Addition of EDTA at concentrations higher than 10 mM to Laminaria thalli which had been preincubated with HdAly and Cellulase Onozuka, dramatically improved the yield of protoplasts. EDTA was far more effective than EGTA, indicating that chelating divalent metal ions such as Mg²⁺ and Sr²⁺ in addition to Ca²⁺ is a key factor for high-yield production of Laminaria protoplasts. Protoplasts had a mean diameter of 27 μm, suggesting that most protoplasts were derived from cortical cells rather than epidermal layer cells. Recombinant HdAly (rHdAly) was produced from a cDNA clone in the Sf9 insect cell expression system. rHdAly had substantially the same enzymatic properties and protoplast-producing ability as did native HdAly. The optimal conditions for high yield production of protoplasts from Laminaria using native and recombinant HdAlys were investigated.     

Plant regeneration from protoplasts of Laminaria japonica Areschoug (Laminariales, Phaeophyceae) in a continuous-flow culture system

A continuous-flow culture system was developed for culturing Laminaria japonica protoplasts. Protoplasts were settled on 5-μm pore size nylon mesh fixed inside a 50-ml plastic syringe, and cultured in Provasoli's enriched seawater with iodine medium with a gentle upward flow generated by a peristaltic pump. In the culture system, 50% of the protoplasts regenerated their cell wall within 24 hours and almost all protoplasts regenerated a cell wall after 3 days culture. After cell wall regeneration, a number of cells divided and regenerated into sheet-shaped thalli. The thalli transferred to a tissue culture flask developed into sporophyte-like plantlets within 1 month. Plantlets then differentiated into blade, stipe, and holdfast, with a proper mucilage canal. Received: 21 April 1997 / Revision received: 27 June 1997 / Accepted: 5 July 1997     

Protoplast isolation in the marine brown alga Dictyopteris prolifera (Dictyotales)

Protoplasts were isolated from thalli of Dictyopteris prolifera using a mixture of crude enzymes from vicera of live oysters (Crassostrea gigas) and the following commercial enzymes: an abalone enzyme, cellulase, polygalacturonase and hemicellulase. The enzyme mixtures produced up to 3.3 × 10⁷ cells per l g of tissue fresh weight. The conversion to protoplasts of the cells was about 100% using the oyster enzyme or the abalone enzyme alone. The optimum pH for protoplast isolation was 6.0 and 20 hours were required for conversion to protoplasts.     

Isolation of protoplasts from tissue fragments of Philippine cultivars of <Emphasis Type="Italic">Kappaphycus alvarezii</Emphasis> (Solieriaceae,Rhodophyta)

Protoplasts were isolated from tissue fragments (<1 mm²) of three Philippine cultivars of Kappaphycus alvarezii: the giant cultivar, cultivar L and Bohol wild type, by enzymatic dissolution of cell walls. Yields of viable protoplasts from young and old thalli (apical, middle, basal segments) were compared at various temperatures, duration of treatment and pH using eight combinations of commercial enzymes (abalone acetone powder and cellulase), and prepared extracts from fresh viscera of abalone (Haliotis asinina) and a terrestrial garden snail. Isolated protoplasts were grown in various culture media, temperatures, photoperiods and irradiance values to determine the conditions that favor germination and growth.Protoplast yields in tissues treated with commercial enzymes and the garden snail extract were lower than those obtained in tissues treated with fresh abalone extracts. Generally, the number of viable protoplasts increased with duration of enzyme treatment at 25 °C with a maximum yield of 8.2 × 10³ g⁻¹ tissue at 48 h. Yields were consistently higher in all cultivars at pH 6.1. The yields were also high from the middle segments of the giant cultivar (3.7 × 10³ g⁻¹ tissue) and Bohol wild type (4.5 × 10³ g⁻¹ tissue) treated with fresh abalone extract, and from basal segments of cultivar L and tissues treated with garden snail extract. The germination rate of protoplasts was highest (39.8%) at 25 °C and 20 μmol photon m⁻² s⁻¹, using a 12:12 light dark photoperiod. The filament was 3.7 mm long by Day 5. These findings are relevant to developing cultures from protoplasts for genetic or strain improvement of K. alvarezii cultivars.     

Rapid separation of the plastid,mitochondrial, and cytoplasmic fractions from intact leaf protoplasts of Avena

Purified intact protoplasts were isolated from etiolated and greening leaves of Avena sativa. They were ruptured by forcing them through a 20-m aperture nylon net and immediately thereafter fractionated into a pure pellet of plastids (well above 70% of total plastids), a layer of mitochondria only slightly contaminated by other cellular constituents (about 50% of total mitochondria), and a cytoplasmic supernatant. This was achieved within 60 s by an integrated method of homogenation of protoplasts and centrifugal filtration of the homogenate on a gradient of silicone oils, contained together with the nylon net in 450 l microtubes, and verified by comparing the levels of activity of specific markers within the three fractions obtained. With appropriate modifications to immediately quench metabolic reactions within the fractions, this method allows the determination of metabolite levels within plastids, mitochondria, and the cytoplasmic compartment of intact protoplasts. The applicability of this technique is demonstrated by the determination of ATP in the plastids, mitochondria, and the cytoplasm of protoplasts obtained from etiolated and greening primary leaves of Avena. The levels of ATP, corrected for contamination of the fractions by each other, exhibit a pronounced transient increase during greening, especially within the cytoplasm.Abbreviations BSA bovine serum albumin - Cyt c cytochrome c - EDTA ethylenediamine tetraacetic acid - HEPES N-2-hydroxyethyl-piperazine-N-2-ethane sulphonic acid - MES 2(N-morpholino) ethane sulphonic acid - PGA 3-phosphoglyceric acid - PEP phosphoenol pyruvic acid - RuBP ribulose-1.5-bis-phosphate     

The influences of temperature and irradiance on thallus length of <Emphasis Type="Italic">Saccharina japonica</Emphasis> (Phaeophyta) during the early stages of cultivation

Korean Saccharina japonica is highly valued, both for human consumption and abalone feed. For the stable production of abalone feed, fresh seaweed biomass is required throughout the year. However, currently, the production of farmed Saccharina is limited by environmental conditions such as temperature, irradiance, and nutrient availability between August and November. Due to shortages experienced in supply, the production of early-season biomass can be highly profitable and, therefore, some famers attempt to start their cultivation activities before prevailing, surface seawater temperatures (SST) are optimal. However, attempting to cultivate too early, can lead to total crop failure. Young kelp sporophytes are easily destroyed between 18 and 22 °C SST, which can occur during the early nursery period when the materials are confined to tanks. This study investigated the growth of S. japonica thalli and photosynthetic quantum yield (F_v/F_m) under five temperatures (i.e., 18–26 °C, at 2° increments) and five irradiances (i.e., 5, 10, 20, 40, and 80 μmol photons m^?2 s^?1). This was undertaken for four different size groups of sporophyte thalli (i.e., 0.25, 1, 5, 10 mm). There were different responses of the initial groups of S. japonica showing different tolerances to temperature and irradiance. In general, the smaller plants (1 mm) were more tolerant of sub-optimal conditions than their larger cohorts. These results indicated the optimum temperature and irradiance ranges for different size groups of S. japonica thalli which, if adopted in management protocols, could contribute to enhanced profitability and a more stable and evenly distributed production of Saccharina raw materials over an entire annual basis.     

Strain selection and initiation timing influence the cultivation period of <Emphasis Type="Italic">Saccharina japonica</Emphasis> and their impact on the abalone feed industry in Korea

Cultivations of the brown seaweed, Saccharina japonica, was developed, promoted, and industrialized in the 1970s and is highly valued in Korea both for human consumption and as a feed for the rapidly developing abalone farming industry. Production has continually increased, and approximately 442,637 tonnes wet weight was harvested in Korea in 2015. Abalone is a highly sought-after delicacy in Korea, and the abalone farming industry has been developed based on a stable production of seaweed. Korean abalone farmers prefer to feed their stock on locally cultured S. japonica; however, between August and November, the supply of farmed S. japonica declines because higher seawater temperatures reduce S. japonica productivity. In an attempt to overcome this temperature-induced period of low production, cultivation trials with a strain of S. japonica selected to withstand higher cultivation temperatures were undertaken. Strain selection involved using individual parent thalli that were found to remain productive under high seawater temperature (26 °C) at Wando. Male and female gametophytes were isolated through 3 cycles of free-living gametophyte culture to produce the F₃ strain used in the production trials. Production trials using the selected strain were initiated every month between December 2014 and March 2015. This delayed the initiation of culture beyond the latest initiation time currently used by farmers (December). Delaying initiation of cultivation resulted in delayed maximum growth compared to the control. Growth of the F₃ strain continued for up to 3 months longer than normally achieved on farms for non-selected thalli. The mean length, growth rate, and biomass were also greater than those achieved by the control strain. The use of the F₃ strain of S. japonica coupled with delayed initiation of culture can therefore be used to help to ensure a stable year round algal feed supply for abalone industry in Korea.     

An improved method for the generation and transfection of protoplasts from Cucumis sativus Cotyledons

Summary A protocol was developed for the preparation of Cucumis sativus var Straight 8 protoplasts that incorporates a two-step Ficoll^® gradient and results in a high percentage of viable, debris-free protoplasts suitable for the transient expression of foreign genes. Polyethylene glycol and electroporation were compared for their effect on protoplast transfection with commonly used reporter genes. Using a polyethylene glycol method, cucumber protoplasts transfected with a plasmid containing the -glucuronidase gene showed high expression levels, while protoplasts transfected with a plasmid containing the chloramphenicol acetyl transferase gene showed levels of activity that were barely distinguishable from mock-transfected controls. Tomato ringspot virus genomic RNA was also transfected into the protoplasts, and the assembly of viral particles was confirmed.     

Production and seeding of protoplasts of <Emphasis Type="Italic">Porphyra okhaensis</Emphasis> (Bangiales,Rhodophyta) in laboratory culture

High yields of viable protoplasts were produced from Porphyra okhaensis H. Joshi, Oza & Tewari following two-step enzymatic digestion (protease pretreatment and cell wall polysaccharides-degrading enzyme treatment) of the thallus. Pretreatment of the tissues with 1% Protease P6 at 20± 1 ^°C for 30 min prior to digestion with cell wall polysaccharide-degrading enzymes increased the protoplast yield two fold compared to tissues that were digested with polysaccharide-degrading enzyme mixture. The polysaccharide-degrading enzymes employed for protoplast isolation from P. okhaensis were Cellulase Onozuka R-10, Macerozyme R-10, abalone acetone powder and agarase. Suitable pH, temperature and duration of enzyme treatment for optimal production of viable protoplasts were pH 6, 20± 1 ^°C and 3 h, respectively. Mannitol (0.8 M) was found to be an excellent osmotic stabilizer. When the tissue of P. okhaensis pretreated with 1% protease solution was digested with commercial enzyme mixture consisting of 2% Cellulase Onozuka R-10, 2% Macerozyme R-10, 1% abalone acetone powder, 50 units of agarase and 0.8 M mannitol in 1% NaCl (adjusted to pH 6.0 with 25 mM MES buffer) with gentle agitation for 3 h at 20± 1 ^°C, 23.2± 0.24× 10⁶ protoplasts g⁻¹ fresh wt. were obtained. The regeneration rate of protoplasts isolated in the present study was found to be 79%. Protoplasts that regenerated cell walls underwent regular cell divisions and developed into leafy gametophytic thallus in the laboratory cultures. Further, the seeding of nylon threads with partially developed protoplasts of P. okhaensis was successful in the laboratory conditions and germlings as long as 3–4 cm were obtained from such seeded threads in one month period in aerated cultures.     

Protoplast Preparation from <Emphasis Type="Italic">Laminaria japonica</Emphasis> with Recombinant Alginate Lyase and Cellulase

Functional recombinant abalone alginate lyase (rHdAly) and β-1,4-endoglucanase (rHdEG66) were expressed as secreted proteins with baculoviral expression systems. The specific activity of each recombinant enzyme, 2,490 and 18.2 U/mg for rHdAly and rHdEG66, respectively, was comparable to its native form at 30°C. Purified rHdAly and rHdEG66 showed the highest specific activity both at 35°C and optimum pH 8.7 and 5.9, respectively. These properties were also comparable to those of the native enzymes. Protoplast isolation was attempted from Laminaria japonica using both rHdAly and rHdEG66. When L. japonica blades were incubated in artificial seawater containing rHdAly and rHdEG66, very low numbers of protoplasts (<1 × 10³ protoplasts/g fresh weight) resulted. However, using blades pretreated with proteinase K, the protoplast was increased up to 5 × 10⁶ protoplasts/g fresh weight. Since the average diameter of isolated protoplasts was 11.6 μm, these cells were mostly derived from the epidermal layer rather than the cortical layer. Our results suggest that at least three enzymes, alginate lyase, cellulase, and protease, are essential for effective protoplast isolation from L. japonica. The protoplast isolation method in this study is more useful than earlier methods because it preferentially yielded protoplasts of the epidermal layer, which are known to be able to be regenerated.     

Are sucrosyl-oligosaccharides synthesized in mesophyll protoplasts of mature leaves of Cucumis melo?

Biosynthesis of sucrosyl-oligosaccharides (raffinose, stachyose) was traced in source leaves of Cucumis melo after ¹⁴C-photoassimilation. The main carbon compound exported was ¹⁴C-labeled stachyose. No oligosaccharide synthesis was detected in young, importing leaves. Mesophyll protoplasts, isolated from mature leaves which had previously photosynthesized ¹⁴CO₂, did not contain ¹⁴C-oligosaccharides but contained [¹⁴C]-sucrose and ¹⁴C-hexoses. Isolated minor-vein-enriched fractions from the same leaves, however, showed nearly 30% of the ¹⁴C of the neutral fraction to be in oligosaccharides. Isolated, viable mesophyll protoplasts incubated with NaH¹⁴CO₃ also failed to incorporate radioactivity into oligosaccharides, although sucrose and galactinol synthesis was unimpaired. Galactinolsynthase activity in leaf extracts and in mesophyll protoplasts was 16.8 mol·h^-1·mg^-1 protein and 13.8 mol·h^-1·mg^-1 protein, respectively. Galactosyltransferase (EC 2.4.1.67), which synthesizes stachyose from raffinose and galactinol, had an activity of 50 nmol·h^-1·mg^-1 protein in leaf extracts and was also present in the minor-vein-enriched fraction, but could not be detected in mesophyll protoplast lysates. The results indicate that mesophyll cells may not be the site of stachyose synthesis although precursor compounds like sucrose and galactinol are synthesized there.Abbreviation HPLC high-performance liquid chromatography     

Development of a quantitative method for determination of the optimal conditions for protoplast isolation from cultured plant cells

An index [kv: average isolation rate of viable protoplast (number/ml min)] was established to evaluate the optimal conditions for protoplast isolation from cultured plant cells. The optimal conditions for protoplasts isolation from Nicotiana tabacum BY2 cultured cells could be determined on the basis of the kv [31.7 × 10³ (number/ml min)]. The colony-forming efficiency of the protoplasts was about 46%. The optimal conditions for protoplasts isolation from Catharanthus roseus [kv = 38.1 × 10³ (number/ml min)] and Wasabia japonica [kv = 14.2 × 10³ (number/ml min)] cultured cells could also be determined. Furthermore, a method for rapid regenerating cell wall of protoplast in liquid culture using alginate gel containing locust bean gum was developed.     

Microcallus formation from maize protoplasts prepared from embryogenic callus

Conditions have been developed that induce maize (Zea mays L.) protoplasts to re-synthesize cell walls and to initiate cell divisions. Two types of embryogenic maize callus were used as a source of protoplasts: a heterogeneous callus (Type I) derived from immature embryos after three weeks in culture, and a friable, rapidly growing callus (Type II) selected from portions of the Type I callus. Many variables in the growth conditions of the donor tissue (type of medium, transfer schedule, age of callus), protoplast isolation solutions (pH, osmolarity, type and concentration of cell wall hydrolyzing enzymes, addition of polyamines) and conditions (amount of time in enzyme, amount of tissue per volume of enzyme incubation medium, agitation, preplasmolysis of source tissue, type of callus), and purification procedures (filtration and-or flotation), were found to affect both yield and viability of protoplasts (based upon fluorescein-diacetate staining). Our isolation procedure yielded high numbers of viable, uninucleated maize callus protoplasts which were densely cytoplasmic and varied in size from 20 to 50 m in diameter. Protoplasts plated in solid medium formed walls and divided several times. Of several gelling agents tested for protoplast propagation, only agarose resulted in protoplasts capable of sustained divisions leading to the formation of microcalli. Plating efficiency was established over a wide range of protoplast densities (10³–10⁷ protoplasts/ml). Highest plating efficiency (25%) was obtained at 1·10⁶ protoplasts/ml). The resulting microcalli grew to be dense clusters of about 0.1–0.5 mm in diameter and then stopped growing. Nurse cultures of maize and carrot (Daucus carota L.), were used to establish that individual protoplasts (not contaminating cells or cell clusters) formed walls and divided. Nurse cultures also increased the efficiency of microcallus formation from protoplasts.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - MS Murashige and Skoog (1962) salts - MS 1D Murashige and Skoog salts with 1 mg/l 2,4-D - MS 2D Murashige and Skoog salts with 2 mg/l 2,4-D - N₆ medium of Chu et al. (1975) - NN67-mod medium of Nitsch and Nitsch (1967) as modified in the present paper - FDA fluorescein diacetate - LMP low melting point     

Characterization of chromosome and plasmid transformation in Bacillus subtilis using gently lysed protoplasts

Competent cells of Bacillus subtilis were transformed with DNA from gently lysed protoplasts. Significant linkages among markers separated by distances of approximately 2.3% of the total chromosome were found, which have not been detected for conventional transformation. In comparison to previous reports, enhanced plasmid transformation was observed [4.0×10⁷ transformants per g DNA (one transformant per 5×10⁴ molecules added)], when competent cells were transformed with DNA from lysed protoplasts harboring pUB110.     

Genotypic variability for protoplast regeneration in Saintpaulia ionantha (H. Wendl.)

Summary The behaviour of eleven Saintpaulia ionantha (H. Wendl.) genotypes in protoplast culture was compared. Isolation of protoplasts from young shootlets regenerated in vitro on leaf explants, yielded 0.7 to 1.8 × 10⁶ protoplasts per gram fresh weight. In all cultivars and breeding lines tested, cell divisions were observed. The mean division frequencies varied between 1.0 and 5.0% after 14 days, and between 6.4 and 13.8% after 24 days of culture. In ten genotypes callussing and shoot regeneration were achieved. The difference between the genotypes in shoot regeneration rate, between 2 and 68%, was more pronounced. The comparison of four cytokinins indicated hat thidiazuron was most effective for shoot regeneration, but often resulted in poorer shoot quality than benzylaminopurine.Abbreviations BAP (6-Benzylaminopurine) - IAA (In-dole-3-acetic acid) - NAA (-Naphthaleneacetic acid) - TDZ (Thidiazuron = 1-Phenyl-3-(1,2,3-thiadiazol-5-yl)-urea) - 2iP (6-(,-dimethylallylamino)-purine)     

Inhibition of photosystem II activity by Cu++ ion. Choice of buffer and reagent is critical

Cupric ion (Cu⁺⁺) inhibits the rate of photosystem II electron transport and the intensity of the variable part of chl a fluorescence in isolated chloroplast thylakoids. The inhibition is markedly dependent on the nature of the buffer used in the assay medium. In MES and HEPES buffers, complete inhibition of photosystem II occurs at 30 M of Cu⁺⁺, while in Tricine no inhibition occurred even at 200 M Cu⁺⁺. In other buffers used (TES, Phosphate, Tris), the efficacy of Cu⁺⁺ inhibition is intermediate. The calculated binding constants are found to correspond to the observed I₅₀ values for the six buffers used. It is concluded that the previous reports on copper inhibition, where buffers have been used indiscriminately should be reconsidered. Certain reagents such as hydroxylamine, ascorbate and diphenyl carbazide, which react with Cu⁺⁺, should be avoided.Abbreviations Chl chlorophyll - DCIP 2,6-dichlorophenol indophenol - DCMU 3-(3,4 dichlorophenyl)-1,1-dimethyl urea - DAD diaminodurene - DPC diphenyl carbazide - Fv variable chl fluorescence - HEPES N-2-hydroxyethyl piperazine sulfonic acid - I ₃₀ inhibitor concentration causing 30% inhibition of Fv - MES 2-(N-morpholino) ethane sulfonic acid - MV Methyl viologen - PS II Photosystem II - PS I Photosystem I - TES N-tris(hydroxymethyl)-methyl-2-amino sulfonic acid - TMPD N,N,N,N-tetramethyl-p-phenylenediamine - Tricine N-tris(hydroxymethyl) ethylglycine - Tris N-tris(hydroxymethyl)amino ethane     

Molecular weight distribution of cellulose in primary cell walls

The distribution pattern of the degree of polymerization (DP) of cellulose present in the cell walls of mesophyll- and suspension-cultured cells of tobacco was compared to that of newly synthesized ¹⁴C-labeled cellulose from regenerating tobacco protoplasts and suspension-cultured cells. The cellulose was nitrated, and, after fractionation according to differences in solubility in acetone/water, the DP pattern of labeled or unlabeled cellulose nitrate was determined by viscosity measurements. A low (DP<500) and high DP-fraction (DP>2500) of cellulose were predominant in the cell walls of protoplasts, suspension — cultured cells, and mesophyll cells. The average DP of the high molecular weight fraction of cellulose in the cell walls of mesophyll was higher (DP4,000) than in protoplasts or suspension — cultured cells (DP 2,500-3,000). In all cell walls tested, minor amounts of cellulose molecules with a broad spectrum of a medium DP were present. Pulse — chase experiments with either protoplasts or suspension —cultured cells showed that a large proportion of the low and medium DP-cellulose are a separate class of structural components of the cellulose network. The results are discussed in relation to the organization of cellulose in the primary cell wall.Abbreviations DP degree of polymerisation - 2,4-D 2,4-dichlorophenoxyacetic acid - IAA indole-3-acetic acid     

Analysis of labeling of plant protoplast surface by fluorophore-conjugated lectins

Summary Fluorescein or rhodamine conjugates of seventeen different lectins were tested for their ability to label the plasma membrane of live plant protoplasts. During the investigation, a strong effect of calcium was observed on the binding of several lectins to protoplasts derived from suspension cultured rose cells (Rosa sp. Paul's Scarlet). The binding of these lectins was increased by elevating the calcium concentration from 1 to 10 mM in the buffer. Other divalent cations had variable, but similar, effects on lectin binding. The mechanism of this effect appeared to involve the protoplast surface rather than the lectins. Although the cell wall-degrading enzymes used to isolate protoplasts had generally no effect on lectin binding, one clear exception was observed. Binding ofArachis hypogaea agglutinin was markedly reduced on protoplasts isolated with Driselase as compared to protoplasts isolated with a combination of Cellulysin and Pectolyase Y-23. Although most of the lectins that labeled protoplasts derived from cultured rose cells or from corn root cortex (Zea mays L. WF9 × Mo17) had specificities for galactose or N-acetylgalactosamine, some differences in protoplast labeling between lectins of the same saccharide specificity were observed. Two different analyses of the interaction betweenRicinus communis agglutinin and rose protoplasts showed that binding was cooperative with an apparent association constant of 7.2 × 10⁵M^–1 or 9.8 × 10⁵M^–1 with a maximum of approximately 10⁸ lectin molecules bound per protoplast. Treatment of protoplasts with glycosidases which hydrolyze either N- or O-glycosidic linkages of glycoproteins slightly enhanced labeling of protoplasts byRicinus communis agglutinin. Interpretation of these results are discussed.Abbreviations MPR medium, minimal organic medium (Nothnagel andLyon 1986) - APA Abrus precatorius agglutinin - CSA Cytisus sessilifolius agglutinin - ECA Erythrina cristagalli agglutinin - GS-I Griffonia simplicifolia agglutinin - LcH Lens culinarus agglutinin - PNA Arachis hypogaea agglutinin - SBA Glycine max agglutinin - VAA Viscum album agglutinin - VFA Vicia faba agglutinin - WGA Triticum vulgaris agglutinin - Con A Canavalia ensiformis agglutinin - HPA Helix pomatia agglutinin - TPA Tetragonolobus purpureas agglutinin - RCA Ricinus communis agglutinin - DBA Dolichos biflorus agglutinin - SJA Sophora japonica agglutinin - BPA Bauhinia purpurea agglutinin - FITC fluorescein isothiocyanate - Ga1NAc N-acetylgalactosamine - FDA fluorescein diacetate - 2-O-Me-D-Fuc 2-O-methyl-D-fucose Parts of the work presented here are also submitted in partial fulfillment of requirements for the Ph.D. degree.