Synthesis of differentially protected N-acylated reduced pseudodipeptides as building units for backbone cyclic peptides.

Backbone cyclization has become an important method for generating or stabilizing the bioactive conformation of peptides without affecting the amino acid side-chains. Up to now, backbone cyclic peptides were mostly synthesized with bridges between N-amino- and N-carboxy-functionalized peptide bonds. To study the influence of a more flexible backbone on the biological activity, we have developed a new type of backbone cyclization which is achieved via the N-functionalized moieties of acylated reduced peptide bonds. As described in our previous publications, the formation of N-functionalized dipeptide units facilitates the peptide assembly compared with the incorporation of N-alkyl amino acids. Besides the racemization-free synthesis of Fmoc-protected pseudodipeptide esters with reduced peptide bonds, the new type of backbone modification allows the use of a great variety of omega-amino- and alpha,omega-dicarboxylic acids differing in chain length and chemical properties. Best results for the coupling of the omega-amino- and alpha,omega-dicarboxylic acids to the reduced peptide bond were obtained by the formation of mixed anhydrides with alkyl chloroformates. Whereas the protecting group combination of Z/OBzl in the dipeptide unit and Boc/OtBu for the N-functionalized moiety leads to the formation of 2-ketopiperazine during hydrogenation, the combination of Fmoc/OtBu and Alloc/OAll is very suitable for the synthesis of backbone cyclic peptides on solid support.     

Synthesis and biological activities of new side chain and backbone cyclic bradykinin analogues.

A series of conformationally constrained cyclic analogues of the peptide hormone bradykinin (BK, Arg-Pro-Pro-Gly-Phe-Ser-Pro-Phe-Arg) was synthesized to check different turned structures proposed for the bioactive conformation of BK agonists and antagonists. Cycles differing in the size and direction of the lactam bridge were performed at the C- and N-terminal sequences of the molecule. Glutamic acid and lysine were introduced into the native BK sequence at different positions for cyclization through their side chains. Backbone cyclic analogues were synthesized by incorporation of N-carboxy alkylated and N-amino alkylated amino acids into the peptide chain. Although the coupling of Fmoc-glycine to the N-alkylated phenylalanine derivatives was effected with DIC/HOAt in SPPS, the dipeptide building units with more bulky amino acids were pre-built in solution. For backbone cyclization at the C-terminus an alternative building unit with an acylated reduced peptide bond was preformed in solution. Both types of building units were handled in the SPPS in the same manner as amino acids. The agonistic and antagonistic activities of the cyclic BK analogues were determined in rat uterus (RUT) and guinea-pig ileum (GPI) assays. Additionally, the potentiation of the BK-induced effects was examined. Among the series of cyclic BK agonists only compound 3 with backbone cyclization between positions 2 and 5 shows a significant agonistic activity on RUT. To study the influence of intramolecular ring closure we used an antagonistic analogue with weak activity, [D-Phe7]-BK. Side chain as well as backbone cyclization in the N-terminus of [D-Phe7]-BK resulted in analogues with moderate antagonistic activity on RUT. Also, compound 18 in which a lactam bridge between positions 6 and 9 was achieved via an acylated reduced peptide bond has moderate antagonistic activity on RUT. These results support the hypothesis of turn structures in both parts of the molecule as a requirement for BK antagonism. Certain active and inactive agonists and antagonists are able to potentiate the bradykinin-induced contraction of guinea-pig ileum.     

Synthesis of novel protected Nalpha(omega-thioalkyl) amino acid building units and their incorporation in backbone cyclic disulfide and thioetheric bridged peptides.

General methods for the preparation of protected Nalpha(omega-thioalkyl) amino acids building units for backbone cyclization using reductive alkylation and on-resin preparation are described. The synthesis of non-Gly Fmoc-protected S-functionalized N-alkylated amino acids is based on the reaction of readily prepared protected omega-thio aldehyde with the appropriate amino acid. Preparation of Fmoc-protected S-functionalized N-alkylated Gly building units was carried out using two methods: reaction of glyoxylic acid with Acm-thioalkylamine and an on-resin reaction of bromoacetyl resin with Trt-thioalkylamines. Three model peptides were prepared using these building units. The GlyS2 building unit was incorporated into a backbone cyclic analog of somatostatin that contains a disulfide bridge. Formation of the disulfide bridge was performed by on-resin oxidation using 12 or Tl(CF3COO-)3. Both methods resulted in the desired product in a high degree of purity in the crude. The AspS3 building unit was also successfully incorporated into a model peptide. In addition, the in situ generation of sulfur containing Gly building units was demonstrated on a Substance P backbone cyclic analog containing a thioether bridge.     

Synthesis of N-carboxyalkyl and N-aminoalkyl functionalized dipeptide building units for the assembly of backbone cyclic peptides.

To improve the assembly of backbone cyclic peptides, N-functionalized dipeptide building units were synthesized. The corresponding N-aminoalkyl or N-carboxyalkyl amino acids were formed by alkylation or reductive alkylation of amino acid benzyl or tert-butyl esters. In the case of N-aminoalkyl amino acid derivatives the aldehydes for reductive alkylation were obtained from N,O-dimethyl hydroxamates of N-protected amino acids by reduction with LiAlH4. N-carboxymethyl amino acids were synthesized by alkylation using bromoacetic acid ester and the N-carboxyethyl amino acids via reductive alkylation using aldehydes derived from formyl Meldrums acid. Removal of the carboxy protecting group leads to free N-alkyl amino acids of very low solubility in organic solvents, allowing efficient purification by extraction of the crude product. These N-alkyl amino acids were converted to their tetramethylsilane-esters by silylation with N,O-bis-(trimethylsilyl)acetamide and could thus be used for the coupling with Fmoc-protected amino acid chlorides or fluorides. To avoid racemization the tert-butyl esters of N-alkyl amino acids were coupled with the Fmoc-amino acid halides in the presence of the weak base collidine. Both the N-aminoalkyl and N-carboxyalkyl functionalized dipeptide building units could be obtained in good yield and purity. For peptide assembly on the solid support, the allyl type protection of the branching moiety turned out to be most suitable. The Fmoc-protected N-functionalized dipeptide units can be used like any amino acid derivative under the standard conditions for Fmoc-solid phase synthesis.     

Novel method for the synthesis of urea backbone cyclic peptides using new Alloc‐protected glycine building units

Cyclization of bioactive peptides, utilizing functional groups serving as natural pharmacophors, is often accompanied with loss of activity. The backbone cyclization approach was developed to overcome this limitation and enhance pharmacological properties. Backbone cyclic peptides are prepared by the incorporation of special building units, capable of forming amide, disulfide and coordinative bonds. Urea bridge is often used for the preparation of cyclic peptides by connecting two amine functionalized side chains. Here we present urea backbone cyclization as an additional method for the preparation of backbone cyclic peptide libraries. A straightforward method for the synthesis of crystalline Fmoc‐N^α [ω‐amino(Alloc)‐alkyl] glycine building units is presented. A set of urea backbone cyclic Glycogen Synthase Kinase 3 analogs was prepared and assessed for protein kinase B inhibition as anticancer leads. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

The use of crude lipase in deprotection of C-terminal protecting groups

A crude lipase, Newlase F, was used to remove C-terminal protecting groups from dipeptide esters. Hydrolysis of dipeptide n-heptyl esters with Newlase F was conducted in aqueous media containing acetonitrile. The optimum pH and temperature of lipase in Newlase F were 7.0 and 30 °C, respectively. Low level acetonitrile promoted the hydrolysis of dipeptide n-heptyl esters, while high level acetonitrile inhibited the hydrolysis. However, the protease activity in Newlase F was significantly inhibited by acetonitrile. Lipase in Newlase F worked better in a medium containing water-miscible organic solvents than in water-immiscible ones. N-terminal protecting groups were not affected by the protease in the crude enzyme. It was found that the protease in Newlase F did not hydrolyze amide bond with hydrophilic amino acids on either side under these conditions (pH 7.0, room temperature). Newlase F may consequently be used widely in the synthesis of peptide conjugates. The crude enzyme was immobilized on SBA-15 mesoporous molecular sieve. The lipase activity of immobilized preparation was more active on hydrolysis of C-terminal protecting groups and stable than the free enzyme. The immobilization also reduced the protease activity.     

Backbone amide linker (BAL) strategy for Nalpha-9-fluorenylmethoxycarbonyl (Fmoc) solid-phase synthesis of peptide aldehydes.

A rapid and efficient strategy has been developed for the general synthesis of complex peptide aldehydes. N(alpha)-Benzyloxycarbonylamino acids were converted to protected aldehyde building blocks for solid-phase synthesis in four steps and moderate overall yields. The aldehydes were protected as 1,3-dioxolanes except for one case where a dimethyl acetal was used. These protected amino aldehyde monomers were then incorporated onto 5-[(2 or 4)-formyl-3,5-dimethoxyphenoxy]butyryl-resin (BAL-PEG-PS) by reductive amination, following which the penultimate residue was introduced by HATU-mediated acylation. The resultant resin-bound dipeptide unit, anchored by a backbone amide linkage (BAL), was extended further by routine Fmoc chemistry procedures. Several model peptide aldehydes were prepared in good yields and purities. Some epimerization of the C-terminal residue occurred (10% to 25%), due to the intrinsic stereolability conferred by the aldehyde functional group, rather than any drawbacks to the synthesis procedure.     

Polypeptide synthesis using an expressed peptide as a building block for condensation with a peptide thioester: application to the synthesis of phosphorylated p21Max protein(1-101).

An expressed peptide proved to be useful as a building block for the synthesis of a polypeptide via the thioester method. A partially protected peptide segment, for use as a C-terminal building block, could be prepared from a recombinant protein; its N-terminal amino acid residue was transaminated to an alpha-oxoacyl group, the side-chain amino groups were then protected with t-butoxycarbonyl (Boc) groups, and. finally, the alpha-oxoacyl group was removed. On the other hand, an O-phosphoserine-containing peptide thioester was synthesized via a solid-phase method using Boc chemistry. These building blocks were then condensed in the presence of silver ions and an active ester component. During the condensation, epimerization at the condensation site could be suppressed by the use of N,N-dimthylformamide (DMF) as a solvent. Using this strategy, a phosphorylated partial peptide of the p21Max protein, [Ser(PO3H2)2.11]-p21Max(1-101), was successfully synthesized.     

Cyclization of backbone-substituted peptides catalyzed by the thioesterase domain from the tyrocidine nonribosomal peptide synthetase

The excised C-terminal thioesterase (TE) domain from the multidomain tyrocidine nonribosomal peptide synthetase (NRPS) was recently shown to catalyze head-to-tail cyclization of a decapeptide thioester to form the cyclic decapeptide antibiotic tyrocidine A [Trauger, J. W., Kohli, R. M., Mootz, H. D., Marahiel, M. A., and Walsh, C. T. (2000) Nature 407, 215-218]. The peptide thioester substrate was a mimic of the TE domain's natural, synthetase-bound substrate. We report here the synthesis of modified peptide thioester substrates in which parts of the peptide backbone are altered either by the replacement of three amino acid blocks with a flexible spacer or by replacement of individual amide bonds with ester bonds. Rates of TE domain catalyzed cyclization were determined for these substrates and compared with that of the wild-type substrate, revealing that some parts of the peptide backbone are important for cyclization, while other parts can be modified without significantly affecting the cyclization rate. We also report the synthesis of a modified substrate in which the N-terminal amino group of the wild-type substrate, which is the nucleophile in the cyclization reaction, is replaced with a hydroxyl group and show that this compound is cyclized by the TE domain to form a macrolactone at a rate comparable to that of the wild-type substrate. These results demonstrate that the TE domain from the tyrocidine NRPS can catalyze cyclization of depsipeptides and other backbone-substituted peptides and suggest that during the cyclization reaction the peptide substrate is preorganized for cyclization in the enzyme active site in part by intramolecular backbone hydrogen bonds analogous to those in the product tyrocidine A.     

Novel Gly building units for backbone cyclization: synthesis and incorporation into model peptides

We report the preparation of novel building units for backbone cyclization that have the general formula Fmoc-N[CH(R)CO₂Al]Gly-OH. These building units were prepared by the reductive alkylation method using allyl esters of several amino acids as starting material and hence, respectively, contain the side chain of these amino acids. These N-alkylated Gly building units were incorporated in model backbone cyclic peptides. The resulting crude backbone cyclic peptides were obtained in high degree of purity according to HPLC and mass spectrometric analyses.     

八肽胆囊收缩素的结构与活性关系

本文采用液相多肽合成法制备了八肽胆囊收缩素(CCK_8)的六种类似物,并测定了它们诱导离体的豚鼠胆囊收缩的生物学活性。发现CCK_8的N-端乙酰化不改变其生物活性,脱去N-端氨基的CCK_8类似物即Suc-CCK_7与母体CCK_8相比,其活性明显增加。在Boc-CCK_7中,Met被NIe取代活性可完全保留,Gly~(29)被D-Ala取代后仍保留相当的活性,但Gly~(29)被β-Ala取代后则失去胆囊收缩活性;在Met~(28)-Gly~(29)区域引入刚性的r-内酰胺环作为构象限制,也导致活性完全丧失。     

Insect neuropeptide antagonist. Part II. Synthesis and biological activity of backbone cyclic and precyclic PBAN antagonists.

A new approach for the design and synthesis of pheromone biosynthesis activating neuropeptide (PBAN) agonists and antagonists using the backbone cyclization and cycloscan concepts is described. Two backbone cyclic (BBC) libraries were synthesized: library I (Ser library) was based on the active C-terminal hexapeptide sequence Tyr-Phe-Ser-Pro-Arg-Leu-NH2 of PBAN1-33NH2; whereas library II (D-Phe library) was based on the sequence of the PBAN lead linear antagonist Arg-Tyr-Phe-d-Phe-Pro-Arg-Leu-NH2. In both libraries the Pro residue was replaced by the BBC building unit Nalpha-(omega-aminoalkyl) Gly having various lengths of alkyl chain. The peptides of the two libraries were tested for agonistic and antagonistic activity. Four precyclic peptides based on two of the BBC antagonists were also synthesized; their activity revealed that a negative charge at the N-terminus of the peptide abolished antagonistic activity. We also describe the use of the reagent SiCl3I for selective deprotection of the Boc group from the building unit prior to on-resin amino-end to backbone-nitrogen (AE-BN) cyclization, during solid-phase synthesis with Fmoc chemistry.     

Preparation and application of O-amino-serine, Ams, a new building block in chemoselective ligation chemistry.

The non-codable amino acid O-amino-serine, Ams, has been prepared in both L- and D-forms as the orthogonally protected derivative, Fmoc-Ams(Boc)-OH (1 and 2). This new amino acid derivative is useful for chemoselective ligations. Under acidic conditions and in the presence of all other common amino acid functionalities, the oxyamine function selectively forms oxime linkages with aldehydes. The Ams residue has been incorporated into both ends of the peptide sequence Asp-Leu-Trp-Gln-Lys using standard SPPS. The deprotected peptide has been used for chemical ligation to afford a peptide dimer as well as a glycopeptide. Ams racemization was found to be negligible, as monitored by HPLC separation of Ams dipeptide diastereomers.     

Characterization of a self-splicing mini-intein and its conversion into autocatalytic N- and C-terminal cleavage elements: facile production of protein building blocks for protein ligation

The determinants governing the self-catalyzed splicing and cleavage events by a mini-intein of 154 amino acids, derived from the dnaB gene of Synechocystis sp. were investigated. The residues at the splice junctions have a profound effect on splicing and peptide bond cleavage at either the N- or C-terminus of the intein. Mutation of the native Gly residue preceding the intein blocked splicing and cleavage at the N-terminal splice junction, while substitution of the intein C-terminal Asn154 resulted in the modulation of N-terminal cleavage activity. Controlled cleavage at the C-terminal splice junction involving cyclization of Asn154 was achieved by substitution of the intein N-terminal cysteine residue with alanine and mutation of the native C-extein residues. The C-terminal cleavage reaction was found to be pH-dependent, with an optimum between pH6.0 and 7.5. These findings allowed the development of single junction cleavage vectors for the facile production of proteins as well as protein building blocks with complementary reactive groups. A protein sequence was fused to either the N-terminus or C-terminus of the intein, which was fused to a chitin binding domain. The N-terminal cleavage reaction was induced by 2-mercaptoethanesulfonic acid and released the 43kDa maltose binding protein with an active C-terminal thioester. The 58kDa T4 DNA ligase possessing an N-terminal cysteine was generated by a C-terminal cleavage reaction induced by pH and temperature shifts. The intein-generated proteins were joined together through a native peptide bond. This intein-mediated protein ligation approach opens up novel routes in protein engineering.     

Synthesis and use of a pseudo-cysteine for native chemical ligation.

The process of native chemical ligation (NCL) is well described in the literature. An N-terminal cysteine-containing peptide reacts with a C-terminal thioester-containing peptide to yield a native amide bond after transesterification and acyl transfer. An N-terminal cysteine is required as both the N-terminal amino function and the sidechain thiol participate in the ligation reaction. In certain circumstances it is desirable, or even imperative, that the N-terminal region of a peptidic reaction partner remain unmodified, for Instance for the retention of biological activity after ligation. This work discusses the synthesis of a pseudo-N-terminal cysteine building block for incorporation into peptides using standard methods of solid phase synthesis. Upon deprotection, this building block affords a de facto N-terminal cysteine positioned on an amino acid sidechain. which is capable of undergoing native chemical ligation with a thioester. The syntheses of several peptides and structures containing this motif are detailed, their reactions discussed. and further applications of this technology proposed.     

Synthesis and characterization of a tetranucleotide analogue containing alternating phosphonate-amide backbone linkages

Described herein is the synthesis and characterization of a tetranucleotide, 5'-dC-phosphonate-T-amide-T-ophosphonate-dC (III), in which the C-T and T-C steps contain a phosphonate backbone bond and T-T is a peptide nucleic acid dimer unit (neutral backbone). The 5'- and 3'-OH groups of the tetramer can be further derivatized and, thus, the compound is a potential building block for longer oligonucleotides which will contain alternating backbone modifications at designated positions. The synthesis involved first the preparation of two hybrid peptide-deoxyribose dinucleotides, CT-CO (I) and N-CT (II) (C and T are nucleobases; CO and N are carboxylic and amino terminal, respectively); each is linked through a phosphonate linkage. A condensation reaction between the two dimers, followed by deprotection, resulted in the formation of a peptide linkage to give the desired tetramer III. The reaction conditions used are mild to afford products in moderate to excellent yields. The DNA-PNA-DNA tetramer, d(CTTC), is a substrate for T4 kinase but fails to give a ligation product, even though NMR shows weak interactions between the tetramer III with its complementary sequence, d(GAAG).     

Dipeptide derivative synthesis catalyzed by Pseudomonas aeruginosa elastase.

Pseudomonas aeruginosa elastase was used to synthesize various N-protected dipeptide amides. The identity of the products was confirmed by FAB(+)-MS. After recrystallization, the yield of their synthesis was calculated, their purity was checked by RP-HPLC and their melting point was measured. With regard to the hydrolysis, it is well-established that the enzyme prefers hydrophobic amino acids in P'1 position and it has a wide specificity for the P1 position. This specificity was demonstrated to be quite unchanged when comparing the initial rates of peptide bond formation between different carboxyl donors (Z-aa) and nucleophiles (aa-NH2). The elastase, but not the thermolysin, was notably able to incorporate tyrosine and tryptophan in P'1 position. Furthermore, synthesis initial rates were at least 100 times faster with the elastase. To overcome the problematic condensation of some amino acids during chemical peptide synthesis, it has been previously suggested that enzymatic steps can combine with a chemical strategy. We demonstrated that the elastase readily synthesizes dipeptide derivatives containing various usual N-protecting groups. It was especially able to condense phenylalaninamide to Fmoc- and Boc-alanine. Increasing interest in peptides containing unnatural amino acids led us to try the elastase-catalyzed synthesis of Z-dipeptide amides including those amino acids in the P1 position. A synthesis was demonstrated with alphaAbu, Nle, Nva and Phg.     

Peptides Derived from α-hydroxymethylserine: Aspects of solid-phase synthesis

Summary The solid-phase synthesis of peptides derived from the sterically hindered α-hydroxymethylserine (HmS) was investigated. The acid-sensitive,O,O-isopropylidene (Ipr) protection of HmS is compatible with the Fmoc chemistry, represented here by the Fmoc-HmS(Ipr)-OH and Fmoc-HmS(Ipr)-F derivatives. Three analogs of the opioid pentapeptide DADLE with a single or two consecutive HmS residue(s) were synthesized using Wang resin as the solid support. The HATU method has been shown to effectively accomplish ‘difficult’ couplings with the HmS(Ipr) residue. Wang resin is not suitable, for the synthesis of sequences with a C-terminal HmS because of the easy formation of the diketopiperazine resulting from the cyclization of the susceptible dipeptide sequence AA-HmS(Ipr) bound to the resin. A further drawback of the Wang resin methodology is the increased danger of the undersired N→O-acyl shift, when long-lasting acidic cleavage is applied. These side reactions are totally suppressed when the 2-chlorotrityl polystyrene is used as a solid support. The mild conditions (AcOH/TFE/DCM) applied for the peptide detachment from this resin do not affect the Ipr protection, affording highly pure fragments with HmS(Ipr) residues suitable for post-cleavage condensation, cyclization or controlled side-chain deprotection. This approach is documented by the efficient synthesis of linear and cyclic analogs of the opioid hexapeptide DTLET containing two residues of HmS or HmS(Ipr) in positions 2 and 6.     

Syntheses and activities of backbone‐side chain cyclic octapeptide ligands with N‐functionalized phosphotyrosine for the N‐terminal SH2‐domain of the protein tyrosine phosphatase SHP‐1

The protein tyrosine phosphatase SHP‐1 plays an important role in many physiological and pathophysiological processes. This phosphatase is activated through binding of ligands to its SH2‐domains, mainly to the N‐terminal one. Based on a theoretical docking model, backbone‐to‐side chain cyclized octapeptides were designed as ligands. Assembly of such modelled structures required the synthesis of N‐functionalized tyrosine derivatives and their incorporation into the sequence. Because of difficulties encountered in the condensation of N‐protected amino acids to the N‐alkylated tyrosine‐peptide we synthesized and used preformed dipeptide building units. As all attempts to obtain phosphorylated dipeptide units failed, the syntheses had to be performed with a free phenolic function. Use of different N‐alkyl or cycloalkyl residues in the N‐functionalized side chains allowed to investigate the effect of ring size, flexibility and hydrophobicity of formed lactam bridges on stimulatory activity. All tested linear and cyclic octapeptides stimulate the phosphatase activity of SHP‐1. Stimulatory activities of cyclic ligands increase with the chain length of the lactam bridges resulting in increased flexibility and better entropic preformation of the binding conformation. The strong activity of some cyclic octapeptides supports the modelled structure. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Optimization of enzyme-mediated peptide bond formation

Enzyme-catalyzed peptide bond formation requires thorough examination and optimization of each coupling step. In order to identify factors influencing the selectivity between aminolysis and hydrolysis, a systematic study was carried out for the kinetically controlled peptide synthesis. The reaction temperature, the type of C-terminal protecting group, and different organic cosolvents showed little influence on the selectivity. The enzyme, excess nucleophile, pH, N-terminal protecting group, and ionic strength of the solution were identified as major factors controlling the selectivity and, therefore, the yield of the dipeptide synthesis. Under optimized conditions, the selectivity of the chymotrypsin-catalyzed synthesis of PheSer could be increased from 35 to 100%.