The ReH6[P(C6H5)3]2 ion as a ligand: complexes with M(CO)3 fragments (M = Cr, Mo, W)

The reactions of [(H₅C₆)₃P]₂ReH₆⁻ with (CH₃CN)₃Cr(CO)₃, (diglyme)Mo(CO)₃ or (C₃H₇CN)₃W(CO)₃ led to the formation of [(H₅C₆)₃P]₂ReH₆M(CO)₃⁻ (M = Cr, Mo, W) complexes. These have been characterized by IR and NMR spectroscopies, as well as elemental analyses. A single crystal X-ray diffraction study has also been carried out for the M = Cr complex as a K(18-crown-6)⁺ salt. The complex crystallizes as a THF monosolvate in the monoclinic space group P2₁/n with a = 22.323(6), B = 9.523(2), C = 27.502(5) Å, β = 104.98(2)⁰ and V = 5648 ų for Z = 4. The Re---Cr separation is 2.5745(12) Å, and the two phosphine ligands are oriented unsymmetrically. Although the hydride ligands were not found, the presence of three bridging hydrides and a dodecahedral coordination geometry about rhenium could be inferred. Low temperature ¹H and ³¹P NMR spectroscopic studies did not reveal the low symmetry of the solid state structure.     

Hetero-polynuclear complexes containing bridging diphenylphosphino-alkenes and -alkynes. The crystal structure of an Rh2{μ−ν:ν−P(Ph2) (CH2)3C≡CR}Co2 complex

The phosphinoalkenes Ph₂P(CH₂)_nCH=CH₂ (n= 1, 2, 3) and phosphinoalkynes Ph₂P(CH₂)_n C≡CR (R = H, N = 2, 3; R = CH₃, N = 1) have been prepared and reacted with the dirhodium complex (η−C₅H₅)₂Rh₂(μ−CO) (μ−η²−CF₃C₂CF₃). Six new complexes of the type (ν−C₅H₅)₂(Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃)L, where L is a P-coordinated phosphinoalkene, or phosphinoalkyne have been isolated and fully characterized; the carbonyl and phosphine ligands are predominantly trans on the Rh---Rh bond, but there is spectroscopic evidence that a small amount of the cis-isomer is formed also. Treatment of the dirhodium-phosphinoalkene complexes with (η−CH₃C₅H₄)Mn(CO)₂thf resulted in coordination of the manganese to the alkene function. The Rh₂---Mn complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂P(CH₂)₃CH=CH₂} (η−CH₃C₅H₄)Mn(CO)₂] was fully characterized. Simi treatment of the dirhodium-phosphinoalkyne complexes with Co₂(CO)₈ resulted in the coordination of Co₂(CO)₆ to the alkyne function. The Rh₂---Co₂ complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂PCH₂C≡CCH₃}Co₂(CO)₂], C₃₇H₂₅Co₂F₆O₇PRh₂, was fully characteriz spectroscopically, and the molecular structure of this complex was determined by a single crystal X-ray diffraction study. It is triclinic, space group (C_i¹, No. 2) with a = 18.454(6), B = 11.418(3), C = 10.124(3) Å, = 112.16(2), β = 102.34(3), γ = 91.62(3)°, Z = 2. Conventional R on |F| was 0.052 fo observed (I > 3σ(I)) reflections. The Rh₂ and Co₂ parts of the molecule are distinct, the carbonyl and phosphine are mutually trans on the Rh---Rh bond, and the orientations of the alkynes are parallel for Rh₂ and perpendicular for Co₂. Attempts to induce Rh₂Co₂ cluster formation were unsuccessful.     

Application of the hydro(solvo)thermal technique to the synthesis of metal carbonyl chalcogenide clusters Part 3. Synthesis, structural characterization, and spectroscopic studies of the clusters [{M(CO)4}n(MS4)] (M = Mo, W; N=1, 2)

The methanothermal reactions of M(CO)₆ (M = Mo, W) with Na₂S₂ gave a series of homonuclear clusters [{M(CO)₄}_n(MS₄)]²⁻ (M=Mo, W; N=1, 2), i.e. (Ph₄P)₂[(CO)₄Mo(MoS₄)] (I), (Ph₄P)₂[(CO)₄W(WS₄)] (II), (Ph₄P)₂[(CO)₄Mo(MoS₄)Mo(CO)₄] (III) and (Ph₄P)₂[(CO)₄W(WS₄)W(CO)₄] (IV). The two dimers, I and II, as well as the two trimers, III and IV, are isostructural to each other, respectively. All compounds crystallize in the triclinic space group with Z=2. The cell dimensions are: a=12.393(8), b=19.303(9), c=11.909(6) Å, =102.39(5), β=111.54(5), γ=73.61(5)°, V=2522(3) ų at T=23 °C for I; a=12.390(3), b=19.314(4), c=11.866(2) Å, =102.66(2), β=111.49(1), γ=73.40(2)°, V=2511(1) ų at T=23 °C for II; a=11.416(3), b=22.524(4), c=10.815(4) Å, =91.03(2), β=100.57(3), γ=88.96(2)°, V=2733(1) ų at T=−100 °C for III, a=11.498(1), b=22.600(4), c=10.864(3) Å, =90.92(2), β=100.85(1), γ=88.58(1)°, V=2771(2) ų at T=23 °C for IV. The dimers are each formed by the coordination of the tetrathiometalate as a bidentate chelating ligand to an M(CO)₄ fragment while addition of another M(CO)₄ fragment to the dimers results in the trimers. All compounds contain both tetrahedral and octahedral metal centers with the formal 6+ and 0 oxidation states, respectively.     

Heterobimetallic chloro bridgedcomplexes of (η:η−C10H16)-ruthenium(IV) with palladium(II), platinum(II), rhodium(III), iridium(III), copper(I) and rhodium(I)

Metathesis of [(η³:η³−C₁₀H₁₆)Ru(Cl) (μ−Cl)]₂ (1) with [R₃P) (Cl)M(μ-Cl)]₂ (M = Pd, Pt), [Me₂NCH₂C₆H₄Pd(μ-Cl)]₂ and [(OC)₂Rh(μ-Cl)]₂ affords the heterobimetallic chloro bridged complexes (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂M(PR₃)(Cl) (M = Pd, Pt), (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂PdC₆H₄CH₂NMe₂ and (η³:η³-C₁₀H₁₆) (Cl)Ru(μ-Cl)₂Rh(CO)₂, respectively. Complex 1 reacts with [Cp^*M(Cl) (μ-Cl)]₂ (M = Rh, Ir), [p-cymene Ru(Cl) (μ-Cl]₂ and [(Cy₃P)Cu(μ-Cl)]₂ to give an equilibrium of the heterobimetallic complexes and of educts. The structures of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂Pd(PR₃) (Cl) (R = Et, Bu) and of one diastereoisomer of (η³:η³-C₁₀H₁₆)Ru(μ-Cl)₂IrCp^*(Cl) were determined by X-ray diffraction.     

Crystal growth in aqueous hydrofluoric acid and (HF)x · pyridine solutions: syntheses and crystal structures of [Ni(H2O)6][MF6] (M = Ti, Zr, Hf) and Ni3(py)12F6 · 7H2O

The syntheses and structures of [Ni(H₂O)₆]²⁺[MF₆]²⁻ (M = Ti,Zr,Hf) and Ni₃(py)₁₂F₆·7H₂O are reported. The former three compounds are isostructural, crystallizing in the trigonal space group (No. 148) with Z = 3. The lattice parameters are a = 9.489(4), C = 9.764(7) Å, with V = 761(1) ų for Ti; a = 9.727(2), C = 10.051(3) Å, with V = 823.6(6) ų for Zr; and a = 9.724(3), C = 10.028(4)Å, with V = 821.2(8)ų for Hf. The structures consist of discrete [Ni(H₂O)₆]²⁺ and [MF₆]²⁻ octahedra joined by O---HF hydrogen bond Large single crystals were grown in an aqueous hydrofluoric acid solution. Ni₃(py)₁₂F₆·7H₂O crystallizes in the monoclinic space group I2/a (No. 15) with Z = 4. The lattice parameters are a = 16.117(4), B = 8.529(3), C = 46.220(7) Å, β = 92.46(2)°, and V = 6348(5) ų. The structure consists of discrete Ni(py)₄F₂ octahedra linked through H---O---HF and H---O---HO hydrogen bonding interactions. Single c were grown from a (HF)_x·pyridine/pyridine/water solution.     

Alkene rotation in [Ru(η-C5H5) (L2) (η-alkene][CF3SO3] with L2 = iPr- or pTol-diazabutadiene. X-ray crystal structure of [Ru(η-C5H5(pTol-DAB) (η-ethene][CF3SO3]

Reaction of RuCl(η⁵-C₅H₅(pTol-DAB) with AgOTf (OTf = CF₃SO₃) in CH₂Cl₂ or THF and subsequent addition of L′ (L′ = ethene (a), dimethyl fumarate (b), fumaronitrile (c) or CO (d) led to the ionic complexes [Ru(η⁵-C₅H₅)(pTol-DAB)(L′)][OTf] 2a, 2b and 2d and [Ru(η⁵-C₅H₅)(pTol-DAB)(fumarontrile-N)][OTf] 5c. With the use of resonance Raman spectroscopy, the intense absorption bands of the complexes have been assigned to MLCT transitions to the iPr-DAB ligand. The X-ray structure determination of [Ru(η⁵-C₅H₅)(pTol-DAB)(η²-ethene)][CF₃SO₃] (2a) has been carried out. Crystal data for 2a: monoclinic, space group P2₁/n with A = 10.840(1), b = 16.639(1), C = 14.463(2) Å, β = 109.6(1)°, V = 2465.6(5) ų, Z = 4. Complex 2a has a piano stool structure, with the Cp ring η⁵-bonded, the pTol-DAB ligand σN, σN′ bonded (Ru-N distances 2.052(4) and 2.055(4) Å), and the ethene η²-bonded to the ruthenium center (Ru-C distances 2.217(9) and 2.206(8) Å). The C = C bond of the ethene is almost coplanar with the plane of the Cp ring, and the angle between the plane of the Cp ring and the double of the ethene is 1.8(0.2)°. The reaction of [RuCl(η⁵-C₅H₅)(PPh)₃ with AgOTf and ligands L′ = a and d led to [Ru(η⁵-C₅H₅)(PPh₃)₂(L′)]OTf] (3a) and (3d), respectively. By variable temperature NMR spectroscopy the rottional barrier of ethene (a), dimethyl fumarate (b and fumaronitrile (c) in complexes [Ru(η⁵-C₅H₅)(L₂)(η²-alkene][OTf] with L₂ = iPr-DAB (a, 1b, 1c), pTol-DAB (2a, 2b) and L = PPh₃ (3a) was determined. For 1a, 1b and 2b the barrier is 41.5±0.5, 62±1 and 59±1 kJ mol⁻¹, respectively. The intermediate exchange could not be reached for 1c, and the ΔG^# was estimated to be at least 61 kJ mol⁻. For 2a and 3a the slow exchange could not be reached. The rotational barrier for 2a was estimated to be 40 kJ mol⁻. The rotational barier for methyl propiolate (HC≡CC(O)OCH₃) (k) in complex [Ru(η⁵-C₅H₅)(iPr-DAB) η²-HC≡CC(O)OCH₃)][OTf] (1k) is 45.3±0.2 kJ mol⁻¹. The collected data show that the barrier of rotational of the alkene in complexes 1a, 2a, 1b, 2b and 1c does not correlate with the strength of the metal-alkene interaction in the ground state.     

The interaction of Lewis acidic boron derivatives with Re(CO)5−nH(PMe3)n complexes

Lewis acid adducts of the hydrides cis- and trans-Re(CO)(PMe₃)₄H (1) and (2), mer-Re(CO)₂(PMe₃)₃H (3), fac-Re(CO)₂(PMe₃)₃H (4) and trans-Re(CO)₃(PMe₃)₂H (5) were studied with BH₃ and 9-borabicyclo[3,3,1] norbonane (BBNH). Using BH₃·THF and (BBNH)₂ 1 and 2 afforded Re(CO)(PMe₃)₃(η²-BH₄) (6) and Re(CO)(PMe₃)₃(η²-BBNH₂) (7) as stable and isolable products. VT IR studies established for the reaction to 7 that BBNH first attaches in a pre-equilibrium to the O_CO atom of 1 or 2. At higher temperatures ReH adduct formation occurs with instantaneous transformation to 7 and elimination of PMe₃·BBNH. In a similar way, the hydrides 3 and 4 were converted with BH₃·THF and (BBNH)₂ to yield the stable complexes Re(CO)₂(PMe₃)₂(η²-BH₄) (8) and Re(CO)₂(PMe₃)₂(η²-BBNH₂) (9). The intermediacy of the η¹-BH₄ adducts mer-/fac-Re(CO)₂(PMe₃)₃(η¹-BH₄) was confirmed by VT ¹H, ³¹P NMR and VT IR experiments. The conversion of 5 with BH₃·THF led to equilibria with adducts at the O_CO terminus in trans position to H and with H_Re as revealed by VT IR studies. Temperature dependent ³¹P equilibrium studies allowed to calculate ΔH=−4.9 kcal mol⁻¹ and ΔS=+0.034 e.u. for this reaction. These adducts could not be isolated. Compound 5 does not react with (BBNH)₂ even at elevated temperatures. DFT calculations were carried out to support the structures of the BH₃ adducts of 5. In addition a vibrational analysis helped to unravel the IR band assignments of the involved compounds. DFT calculations on 8 confirmed its C_2v structure. X-ray diffraction studies were carried out on single crystals of 6 and 7.     

Olefin versus sulfur coordination of benzo[b]thiophene (BT) in Cp(CO)2Re(η:η-μ2-BT)Cr(CO)3

Reactions of Cr(CO)₃(η⁶-BT), in which the Cr is π-coordinated to the benzene ring of benzo[b]thiophene (BT), with Cp′(CO)₂Re(THF), where Cp′ = η⁵-C₅H₅ or η⁵-C₅Me₅, give the products Cp′(CO)₂Re(η²:η⁶-μ₂-BT)Cr(CO)₃ in which the Cr remains coordinated to the benzene ring and Re is bound to the C(2)=C(3) double bond. An X-ray diffraction study of Cp(CO)₂Re(η²:η⁶-μ₂-BT)Cr(CO)₃ (3) provides details of the geometry. This structure contrasts with that of the Cp′(CO)₂Re(BT) complexes that exist as mixtures of isomers in which the BT is coordinated to the Re through either the double bond (2,3-η²) or the sulfur (η¹(S)). Thus, the electron-withdrawing Cr(CO)₃ group in 3 stabilizes the 2,3-η² mode of BT coordination to the Cp′(CO)₂Re fragment. Implications of these results for catalytic hydrodesulfurization of BT are discussed. Crystal data for 3: triclinic, space group

Full-size image

.     

Chelated alkyl halide manganese complexes (η:η-C5H4CH2CH2X)Mn(CO)2 from photolysis of (η-C5H4CH2CH2X)Mn(CO)3

Manganese tricarbonyl complexes (η⁵-C₅H₄CH₂CH₂Br)Mn(CO)₃ (3) and (η⁵-C₅H₄CH₂CH₂I)Mn(CO)₃ (4), with an alkyl halide side chain attached to the cyclopentadienyl ligand, were synthesized as possible precursors to chelated alkyl halide manganese complexes. Photolysis of 3 or 4 in toluene, hexane or acetone-d₆ resulted in CO dissociation and intramolecular coordination of the alkyl halide to manganese to produce (η⁵:η¹-C₅H₄CH₂CH₂Br)Mn(CO)₂ (5) and (η⁵:η¹-C₅H₄CH₂CH₂I)Mn(CO)₂ (6). Low temperature NMR and IR spectroscopy established the structures of 5 and 6. Photolysis of 3 in a glass matrix at 91 K demonstrated CO release from manganese. Low temperature NMR spectroscopy established that the coordinated alkyl halide complexes are stable to approximately −20°C.     

The coordination chemistry of cationic main group clusters: syntheses and structures of [Fe3(Se2)2(CO)10] and [Fe4(Se2)3(CO)12]

The reactions of the polysulfur and selenium cationic clusters S₈²⁺ and Se₈²⁺ with various iron carbonyls were investigated. Several new chalcogen containing iron carbonyl cluster cations were isolated, depending on the nature of the counteranion. In the presence of SbF₆⁻ as a counterion, the cluster [Fe₃(E₂)₂(CO)₁₀] [SbF₆]₂·SO₂ (E = S, Se) could be isolated from the reaction of E₈²⁺ and excess iron carbonyl. The cluster is a picnic-basket shaped molecule of two iron centers linked by two Se₂ groups, with the whole fragment capped by an Fe(CO)₄ group. Crystallographic data for C₁₀O₁₂Fe₃Se₄Sb₂F₁₂S (I): space group monoclinic P2₁/c, A = 11.810(9), b = 24.023(6), c = 10.853(7) Å, β = 107.15(5)°, V = 2942(3) ų, Z = 4, R = 0.0426, R_w = 0.0503. When Sb₂F₁₁⁻ is present as the counterion, or Se₄[Sb₂F₁₁]₂ is used as the cluster cation source, a different cluster can be isolated, which has the formula [Fe₄(Se₂)₃(CO)₁₂] [SbF₆]₂·3SO₂. The dication contains two Fe₂Se₂ fragments bridged by an Se₂ group. Crystallographic data for C₁₂O₁₈Fe₄Se₆Sb₂F₁₂S₃ (III): space group triclinic , b = 18.400(9), C = 10.253(4) Å, = 93.10(4), β = 103.74(3), γ = 93.98(3)°, V = 1995(1) ų, Z = 2, R = 0.0328, R_w = 0.0325. The CO stretches in the IR spectrum all show a large shift to higher wavenumbers, suggesting almost no τ backbonding from the metals. This also correlates with the observed bond distances. All the compounds are extremely sensitive to air and water, and readily lose SO₂ when removed from the solvent. Thus all the crystals were handled at −100°C. The clusters seem to be either insoluble or unstable in all solvents investigated.     

Synthesis and properties of the dichloro [tetramethyl (trifluoromethyl)cyclopentadienyl]ruthenium dimer: X-ray structure of [M2(η-C5Me4CF3)2Cl2(μ-Cl)2] (M=Ru, Rh)

The reaction of RuCl₃(H₂O), with C₅Me₄CF₃J in refluxing EtOH gives [Ru₂(η⁵-C₅Me₁CF₂)₂ (μ-Cl₂] (20 in 44% yield. Dimer 2 antiferromagnetic (−2J=200 cm¹). The crystal structures of 2 (rhombohedral system, R3 space group, Z=9, R=0.0589) and [Rh₂(η⁵-C₅Me₄CF₃(₂Cl₂(μ-Cl)₂] (3) (rhombohedral system. space group, Z = 9, R = 0.0641) were solved; both complexes have dimeric structures with a trans arrangement of the η⁵-C₅Me₄CF₄ rings. Comparison of the geometry of 2 and 3 with those of the corresponding η⁵-C₅Me₅ complexes shows that lowering the ring symmetry causes significant distortion of the M₂(μ-Cl)₂ moiety. The analysis of the MCl₃ fragment conformations in 2 and 3 and in the η⁵-C₅ME₅ analogues shows that they are correlated with the M---M distances. The Cl atoms are displaced by Br on reaction of 2 with KBr in MeOH to give the diamagnetic dimer [Ru₂(η⁵-C₅Me₄CF₃)₂Br₂ (μ-Br₂] (4). Complex 2 reacts with O₂ in CH₂Cl₂ solution at ambient temperature to form a mixture of isomeric η⁶-fulvene dimers [Ru₂(η⁶-C₅Me₃CF₃ = CH₂)₂Cl₂(μ-Cl)₂] (5). Reactions of 5 with CO and allyl chloride give Ru(η⁵-C₅Me₃CF₃CH₂Cl)(CO)₂Cl (6) and Ru(η⁵-C₅Me₃CF₃CF₃CH₂Cl)(η³-C₃H₅)Cl₂ (7) respectively.     

Synthesis and characterization of SrCu2(O2CR)3(bdmap)3 and Bi2(O2CCH3)4(bdmap)2(H2O) (R = CH3, CF3; bdmap = 1,3-bis(dimethylamino)-2-propanolato)

New mixed metal complexes SrCu₂(O₂CR)₃(bdmap)₃ (R = CF₃ (1a), CH₃ (1b)) and a new dinuclear bismuth complex Bi₂(O₂CCH₃)₄(bdmap)₂(H₂O) (2) have been synthesized. Their crystal structures have been determined by single-crystal X-ray diffraction analyses. Thermal decomposition behaviors of these complexes have been examined by TGA and X-ray powder diffraction analyses. While compound 1a decomposes to SrF₂ and CuO at about 380°C, compound 1b decomposes to the corresponding oxides above 800°C. Compound 2 decomposes cleanly to Bi₂O₃ at 330°C. The magnetism of 1a was examined by the measurement of susceptibility from 5–300 K. Theoretical fitting for the susceptibility data revealed that 1a is an antiferromagnetically coupled system with g = 2.012(7), −2J = 34.0(8) cm⁻¹. Crystal data for 1a: C₂₇H₅₁N₆O₉F₉Cu₂Sr/THF, monoclinic space group P2₁/m, A = 10.708(6), B = 15.20(1), C = 15.404(7) Å, β = 107.94(4)°, V = 2386(2) ų, Z = 2; for 1b: C₂₇H₆₀N₆O₉Cu₂Sr/THF, orthorhombic space group Pbcn, A = 19.164(9), B = 26.829(8), C = 17.240(9) Å, V = 8864(5) ų, Z = 8; for 2: C₂₂H₄₈O₁₁N₄Bi₂, monoclinic space group P2₁/c, A = 17.614(9), B = 10.741(3), C = 18.910(7) Å, β = 109.99(3)°, V = 3362(2) ų, Z = 4.     

Kinetics and mechanisms of ligand substitution reactions of molybdenum SO2 complexes. Synthesis and X-ray structure of trans-Mo(CO)2 (dmpe) (PPh3) (SO2)

Kinetic results are reported for intramolecular PPh₃ substitution reactions of Mo(CO)₂(η¹-L)(PPh₃)₂(SO₂) to form Mo(CO)₂(η²-L)(PPh₃)(SO₂) (L = DMPE = (Me)₂PC₂H₄P(Me)₂ and dppe=Ph₂PC₂H₄PPh₂) in THF solvent, and for intermolecular SO₂ substitutions in Mo(CO)₃(η²-L)(η²-SO₂) (L = 2,2′-bipyridine, dppe) with phosphorus ligands in CH₂Cl₂ solvent. Activation parameters for intramolecular PPh₃ substitution reactions: ΔH^≠ values are 12.3 kcal/mol for dmpe and 16.7 kcal/mol for dppe; ΔS^≠ values are −30.3 cal/mol K for dmpe and −16.4 cal/mol K for dppe. These results are consistent with an intramolecular associative mechanism. Substitutions of SO₂ in MO(CO)₃(η²-L)(η²-SO₂) complexes proceed by both dissociative and associative mechanisms. The facile associative pathways for the reactions are discussed in terms of the ability of SO₂ to accept a pair of electrons from the metal, with its bonding transformations of η²-SO₂ to η¹-pyramidal SO₂, maintaining a stable 18-e count for the complex in its reaction transition state. The structure of Mo(CO)₂(dmpe)(PPh₃)(SO₂) was determined crystallographically: P2₁/c, A=9.311(1), B = 16.344(2), C = 18.830(2) Å, ß=91.04(1)°, V=2865.1(7) ų, Z=4, R(F)=3.49%.     

In situ IR and NMR study of the interactions between proton donors and the Re(I) hydride complex [{MeC(CH2PPh2)3}Re (CO)2H]. ReH…H bonding and proton-transfer pathways

The reactions of various proton donors (phenol, hexafluoro-2-propanol, perfluoro-2-methyl-2-propanol, monochloroacetic acid, and tetrafluoroboric acid) with the rhenium (I) hydride complex [(triphos)Re(CO)₂H] (1) have been studied in dichloromethane solution by in situ IR and NMR spectroscopy. The proton donors from [(triphos)Re(CO)₂H…HOR] adducts exhibiting rather strong H…H interactions. The enthalpy variations associated with the formation of the H-bonds (−ΔH = 4.4–6.0 kcal mol⁻¹) have been determined by IR spectroscopy, while the H…H distance in the adduct [(triphos)Re(CO)₂H…HOC(CF₃)₃] (1.83 Å) has been calculated by NMR spectroscopy through the determination of the T_1min relaxation time of the Re---H proton. It has been shown that the [(triphos)Re(CO)₂H…HOR] adducts are in equilibrium with the dihydrogen complex [(triphos)Re(CO)₂(η²-H₂)]⁺, which is thermodynamically more stable than any H-bond adduct.     

Reactivity, variable temperature solution H NMR studies and MO calculations of dimolybdenum allenylidene complexes of the type [(η-C5H5)2Mo2(CO)4(μ,η(4e)-C=C=CR1R2)]

The reactivity, towards nucleophiles and electrophiles, of dimolybdenum allenylidene complexes of the type [Cp₂Mo₂(CO)₄(μ,η²(4e)-C=C=CR1R2)] (Cp=η⁵-C₅H₅) has been investigated. The nucleophilic attacks occur at the C_γ carbon atom, while electrophiles affec the C atom. Variable temperature solution ¹H NMR studies show a dynamic behavior of these complexes consisting of an equilibrium between two enantiomers with a symmetrical [Cp₂Mo₂(CO)₄(μ-σ,σ(2e)-C=C=CR1R2)] transition state. Extended Hückel MO calculations have been carried out on the model [Cp₂Mo₂(CO)₄(μ,η²-C=C=CH₂]. The calculated charges of the allenylidene carbon atoms suggest that the electrophilic attacks are under charge control, while the nucleophilic attacks are rather under orbital control.     

Studies of the oxovanadium(IV)—oxalate system: syntheses and crystal structures of binuclear (Ph4P)2[(VO)2(H2O)2(C2O4)3]·4H2O and of the one-dimensional chain material, (Ph4P)[VOCl(C2O4)]

The hydrothermal reactions of (Ph₄P)[VO₂Cl₂] and H₂C₂O₄ at 150 and 125°C yield (Ph₄P)₂[V₂O₂(H₂O)₂(C₂O₄)₃]·4H₂O (1) and (Ph₄P)[VOCl(C₂O₄)] (2), respectively. The structure of the molecular anion of 1 consists of a binuclear unit of oxovanadium(IV) octahedra bridged by a bisbidentate oxalate group. The VO₆ coordination geometry at each vanadium site is defined by a terminal oxo group, an aquo ligand, and four oxygen donors — two from the bisbidentate bridging oxalate and two from the terminal bidentate oxalate. The structure of 2 consists of discrete Ph₄P⁺ cations occupying regions between [VOCl(C₂O₄)]⁻_∞ spiral chains. The structure of the one-dimensional anionic chain exhibits V(IV) octahedra bridged by bisbidentate oxalate groups. Crystal data: 1·4H₂O, monoclinic P2₁/n, A = 12.694(3), B = 12.531(3), C = 17.17(3) Å, β = 106.32(2)°, V = 2621.3(13) ų, Z = 2, D_calc = 1.501 g cm⁻³, structure solution and refinement converged at a conventional residual of 0.0518; 2, tetragonal P4₃, A = 12.145(2), C = 15.991(3) Å, V = 2358.7(12) ų, Z = 4, R = 0.0452.     

Synthesis and problematic crystal structures of [Al(CH3CN)6][MCl6]3(CH3CN)3 (M=Ta, Nb or Sb)

Compounds of formula [Al(CH₃CN)₆][MCl₆]₃(CH₃CN)₃ (M=Ta (1); Nb (2); Sb (3)) have been synthesized from the reactions of MCl₅ and AlCl₃ in acetonitrile and characterized by X-ray crystallography. Complex 1 crystallizes in the tetragonal space group P4/mbm with a = B = 10.408(2), C = 7.670(3) Å, V = 830.9(4) ų and Z = 2/3. Complex 2 crystallizes in the tetragonal space group P4/mnc with a = B = 330(a), C = 15.320(3) ų V = 1634.8(4) ų and Z = 4/3. Complex 3 also crystallizes in the tetragonal space group P4/mnc with a = B = 10.313(1), C = 15.238(2) Å, V = 1621.0(1) ų and Z = 4/3. The non-integer Z values for complexes 1–3 result unusual problems of disorder and/or twinning in these crystal structures due to their high symmetry. The M---Cl distances range from 2.329(3) Å in the Ta complex to 2.355(1) Å in the Sb complex, while the Al---N distances are similar in all three complexes, ranging from 1.92(1) to 1.97(1) Å, respectively. Complexes 1–3 are the first structurally characterized complexes that contain a (hexaacetonitrile)aluminum(III) cation.     

Reaction of [Pt{Fe(CO)3(NO)}2(PhCN)2] with diphenyl(2-pyridyl)phosphine selenide. Crystal structure of [(CO)3Fe(μ3-Se){Pt(CO)P(2-C5H4N)Ph2}2] and its theoretical study

The reaction between the linear trinuclear complex [Pt{Fe(CO)₃(NO)}₂(PhCN)₂] and Ph₂(2-C₅H₄N)PSe led to the isolation and characterization of the 46-electron cluster [(CO)₃Fe(μ₃-Se){Pt(CO)P(2-C₅H₄N)Ph₂}₂] (1), whose structure has been determined by X-ray diffraction methods. The cluster typology, which consists of an open triangle Pt---Fe---Pt capped by a μ₃-Se atom, is rather rare. The chemical bonding in 1 and in similar systems has been analyzed through density functional theory (DFT) and qualitative MO approaches. A strict analogy with the well understood L₂M(μ-acetylene)ML₂ systems is invoked by considering 1 as formed by the (CO)₃FeSe tetrahedral unit stabilized by sidewise interactions of the triple bond with two d¹⁰-L₂M fragments. Otherwise, the 18-electron (CO)₃FeSe monomer is unstable as an isolate molecule. This is confirmed by our DFT calculations that indicate how the well characterized dimer (CO)₃Fe(μ-Se₂)Fe(CO)₃ lies as much as, approximately, 58 kcal mol⁻¹ deeper in energy. Finally, by considering an analogy with [L₂M(μ-dichalcogen)ML₂]^{0, +2} redox systems (M=Pd, Pt), reduction of 1 to a dianion has been hypothesized and the structure of the latter has been tentatively explored by DFT calculations.     

Mixed-metal butterfly acetamidediato clusters derived from a highly reactive ruthenium oxo cluster: synthesis and characterization of [(PPh3)2N][MRu3(CO)12(η-μ3-NC(μ-O)CH3)], (M = Mn or Re)

Analogy with the isolable oxo cluster [Fe₃(CO)₉(μ₃-O)]²⁻, which is structurally interesting and synthetically useful, prompted the present attempt to synthesize its ruthenium analog. Although the high reactivity of [Ru₃(CO)₉(μ₃-O)]²⁻ (I) prevented its isolation, the reaction of this species with [M(CO)₃(NCCH₃)]⁺, where M = Mn or Re, yields [PPN][MRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃]⁻. The high nucleophilicity of the oxo ligand in [Ru₃(CO)₉(μ₃-O)]²⁻ (I) appears to be responsible for the conversion of acetonitrile to an acetamidediato ligand and for the instability of I. The crystal structure of [PPN][MnRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃)]] reveals a hinged butterfly array of metal atoms in which the acetamidediato ligand bridges the two wings with μ₃-N bonding to an Mn and two Ru atoms, and μ-O bonding to an Ru atom.     

Correlation of structure and emission in solid state copper(I) complexes; [Cu4I4(CH3CN)2(L)2], L = aniline derivative

Four complexes of the type [Cu₄I₄(CH₃CN)₂(L)₂], L = aniline derivative: Cu₄I₄(CH₃CN)₂(2,6-dimethylaniline)₂ (I), triclinic, , a = 12.449(3), B = 14.108(6), C = 10.606(4) Å, = 73.46(3), β = 95.00(2), γ = 73.42(3)°, V = 1682.3(10) ų; Cu₄I₄(CH₃CN)₂(o-ethylaniline)₂ (II), triclinic,

Full-size image

, V = 1734.0(8) ų; Cu₄I₄(CH₃CN)₂(6-ethyl-o-toluidine)₂ (III), orthorhombic, Pnam, a = 14.976(6), b = 21.187(6), C = 12.545(2) Å, V = 3980.7(2) ų; Cu₄I₄(CH₃CN)₂(p-anisidine)₂ (IV), monoclinic, A2/a, A = 20.032(10), B = 7.863(1), C = 18.715(9) Å, β = 101.56(4)°, V = 2888.0(2) ų; were examined by single crystal X-ray diffraction. Complexes I and II have no internal symmetry elements, III has an internal mirror and IV has a two-fold axis. Ab initio calculations based on the atomic positional parameters of complexes containing the three types of symmetry elements reveal HOMO orbitals to be dominated by the p orbitals of the iodine atoms whereas the LUMO orbitals contain major contributions from copper based p orbitals.