Biochemical and molecular characterization of a lipase produced by Rhizopus oryzae

A novel strain of Rhizopus oryzae WPG secretes a noninduced lipase (ROLw) in the culture medium; purified ROLw is a protein of 29 kDa, the 45 N-terminal amino acid residues were sequenced, this sequence is very homologous to Rhizopus delemar lipase (RDL), Rhizopus niveus lipase (RNL) and R. oryzae lipase (ROL29) sequences; the cloning and sequencing of the part of the gene encoding the mature ROLw, shows two nucleotides differences with RDL, RNL and ROL29 sequences corresponding to the change of the residues 134 and 200; ROLw does not present the interfacial activation phenomenon when using tripropionin or vinyl propionate as substrates; the lipase activity is maximal at pH 8 and at 37 degrees C, specific activities of 3500 or 900 U mg(-1) were measured at 37 degrees C and at pH 8, using olive oil emulsion or tributyrin as substrates, respectively; ROLw is unable to hydrolyse triacylglycerols in the presence of high concentration of bile salts; it is a serine enzyme as it is inhibited by tetrahydrolipstatin and was stable between pH 5 and pH 8.     

N-terminal peptide of Rhizopus oryzae lipase is important for its catalytic properties

In a culture medium, the Rhizopus oryzae strain produces only one form of lipase, ROL32. When the concentrated culture medium was stored at 0 degrees C during several months or kept at 6 degrees C during a few days, we noticed the appearance of a second shorter form of ROL32 lacking its N-terminal 28 amino acid (ROL29). ROL29 was purified to homogeneity and its 21 N-terminal amino acid residues were found to be identical to the 29-49 sequence of ROL32. The cleavage of the N-terminal peptide reduced the specific activity of ROL29 by 50% using either triolein or tributyrin as substrates. In order to explain this decrease of the specific activity of ROL29, we measured its critical surface pressure of penetration into phosphatidyl choline from egg yolk films which was found to be 10 mN/m, in contrast to a value of 23 mN/m found in ROL32. A kinetic study on the surface pressure dependency, stereoselectivity and regioselectivity of ROL29 was performed using the three dicaprin isomers spread as monomolecular films at the air-water interface. Our results showed that in contrast to ROL32, ROL29 presented a preference for the distal ester groups of one diglyceride isomer (1,3-sn-dicaprin). Furthermore, ROL32 was markedly more stereoselective than ROL29 for the sn-3 position of the 2,3-sn-enantiomer of dicaprin. A structural explanation of the enhanced penetration capacity as well as the catalytic activity of ROL32 was proposed by molecular modeling. We concluded that the N-terminal peptide of ROL32 can play an important role in the specific activity, the regioselectivity, the stereoselectivity and the binding of the enzyme to its substrate.     

Inhibition of lipases by proteins. A kinetic study with dicaprin monolayers

We report further investigations on protein inhibition of pancreatic and microbial lipases carried out with the monolayer technique. When beta-lactoglobulin A, melittin, serum albumin, myoglobin, and a protein inhibiting lipase from soybean were preincubated with a dicaprin film at a surface pressure of 35 dynes/cm, no activity was detected with horse pancreatic or Rhizopus delemar lipases. By contrast, Rhizopus arrhizus and Geotrichum candidum lipase activities were not impaired under the same conditions. Experiments using mixed lipid-protein film transfer clearly show that the inhibition of pancreatic lipase is due to the protein associated with lipid and not caused by direct protein-enzyme interaction in the aqueous phase. Three parameters were used to determine the surface properties of the various proteins at the dicaprin/water interface; namely, the initial rate of surface pressure increase, (delta pi/delta t)t = 0, the maximal surface pressure increase, delta pi max, and the critical surface pressure, pi c. A positive correlation was observed between values of (delta pi/delta t)t = 0 of proteins and their respective capacity to inhibit pancreatic and R. delemar lipases. By contrast, there was no apparent correlation with the two other parameters, delta pi max or pi c.     

Role of N-terminal 28-amino-acid region of <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> lipase in directing proteins to secretory pathway of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis>

To develop a new approach for improving heterologous protein production in Aspergillus oryzae, we focused on the functional role of the N-terminal region of Rhizopus oryzae lipase (ROL). Several N-terminal deletion variants of ROL were expressed in A. oryzae. Interestingly, a segment of 28 amino acids from the C-terminal region of the propeptide (N28) was found to be critical for secretion of ROL into the culture medium. To further investigate the role of N28, the ROL secretory process was visualized in vivo using ROL-green fluorescent protein (GFP) fusion proteins. In cells producing ROL with N28, fluorescence observations showed that the fusion proteins are transported through endoplasmic reticulum (ER), Golgi, and cell wall, which is one of the typical secretory processes in a eukaryotic cell. Because the expression of the mature ROL-GFP fusion protein induced fluorescence accumulation without its translocation into the ER, N28 is considered to play a crucial role in protein transport. When N28 was inserted between the secretion signal and GFP, fluorescence observations showed that GFP, which is originally a cytoplasmic protein, was efficiently translocated into the ER of A. oryzae, resulting in an enhanced secretion of mature GFP after proteolytic cleavage of N28. These findings suggest that N28 facilitates protein translocation into ER and can be a promising candidate for improving heterologous protein production in A. oryzae.     

Spacer-mediated display of active lipase on the yeast cell surface

We have constructed a Saccharomyces cerevisiae strain displaying an active lipase on the cell surface by cell surface engineering. The gene encoding Rhizopus oryzae lipase (ROL) was fused with the genes encoding the pre-alpha-factor leader sequence and the C-terminal half of alpha-agglutinin including the glycosylphosphatidylinositol-anchor attachment signal. The constructed gene was overexpressed under the control of the glyceraldehyde-3-phosphate dehydrogenase promoter. Linker peptides (spacers) consisting of the Gly/Ser repeat sequence were inserted at the C-terminal portion of ROL to enhance lipase activity by preserving the conformation of the active site near the C-terminal portion. Localization of the expressed ROL on the cell surface was confirmed by immunofluorescence microscopy. The ROL displayed on the yeast cell wall exhibited activity toward soluble 2,3-dimercaptopropan-1-ol tributyl ester (BALB) and insoluble triolein. The insertion of linker peptides effected the activity towards BALB, thereby demonstrating that the optimal length of linker peptides was present. The activity towards triolein was higher in lipases with longer linker peptides. ROL displayed on the cell wall exhibited a comparable and/or higher activity towards triolein than the secreted form of the enzyme. This is the first report of an active lipase displayed on the cell surface. Furthermore, insertion of a linker peptide of the appropriate length as a spacer may be an improved method to effectively display enzymes, especially those having the active region at the C-terminal portion, on the cell surface.     

Enhancement of activity of lipase-displaying yeast cells and their application to optical resolution of (R,S)-1-benzyloxy-3-chloro-2-propyl monosuccinate

Rhizopus oryzae lipase (ROL) was displayed on the cell surface of Saccharomyces cerevisiae via the Flo1 N-terminal region (1100 amino acids), which corresponds to a flocculation functional domain. The activity of lipase-displaying yeast whole-cell biocatalysts was enhanced 7.3-fold by incubation of the yeast cells at 20 degrees C in distilled water for 8 days after 8 day cultivation. The amount of lipase molecules present in cell wall and intracellular fractions was found to be increased 4.5- and 1.8-fold, respectively, by incubation, which proves that ROL molecules are expressed during incubation. The ROL-displaying yeast whole-cell biocatalyst with enhanced activity was successfully catalyzed by optical resolution of the pharmaceutical precursor (R,S)-1-benzyloxy-3-chloro-2-propyl monosuccinate. Moreover, it showed stable activity through at least eight reaction cycles. These results demonstrate that ROL-displaying yeast cells with enhanced activity by incubation in distilled water are very effective in industrial bioconversion processes.     

Molecular dynamics of microbial lipases as determined from their intrinsic tryptophan fluorescence.

We have studied the intrinsic tryptophan fluorescence of the lipases from Chromobacterium viscosum (CVL), Pseudomonas species (PSL), and Rhizopus oryzae (ROL) in aqueous buffer, zwitterionic detergent micelles, and isopropanol-water mixtures. It was the purpose of this study to obtain information about biophysical properties of the respective enzymes under conditions that modulate enzyme activities and stereoselectivities to a significant extent. According to their decay-associated emission spectra, CVL tryptophans are located in the hydrophobic interior of the protein. In contrast, the PSL and ROL tryptophans are probably confined to the core and the surface of the lipase. From the tryptophan lifetime distributions it can be concluded that the conformation of CVL is not much affected by detergent or organic solvent (isopropanol). Accordingly, CVL is enzymatically active in these systems and most active in the presence of isopropanol. In contrast, ROL and PSL show high conformational mobility, depending on the solvent, because their lifetime distributions are very different in the presence and absence of detergent or isopropanol. Time-resolved anisotropy studies provided evidence that the lipases exhibit very high internal molecular flexibility. This peculiar feature of lipases is perhaps the key to the great differences in activity and stereoselectivity observed in different reaction media. Furthermore, information about self-association of the lipases in different solvents could be obtained. PSL, but not CVL and ROL, forms aggregates in water. Lipase aggregation can be reversed by the addition of detergent or isopropanol, which competes for the hydrophobic surface domains of this protein. This dissociation could efficiently contribute to the increase in lipase activity in the presence of a detergent or isopropanol.     

Inhibition of lipases by proteins: a binding study using dicaprin monolayers

We previously reported that the inhibition of pancreatic and Rhizopus delemar lipases by proteins is due to the protein associated with lipid and is not caused by direct protein-enzyme interaction in the aqueous phase [Gargouri, Y., Piéroni, G., Rivière, C., Sugihara, A., Sarda, L., & Verger, R. (1985) J. Biol. Chem. 260, 2268-2273]. In this study, using radiolabeled lipases, serum albumin, and beta-lactoglobulin A, we investigated their respective binding with respect to lipolysis of dicaprin monolayers. Lipase inhibition was found to be correlated with a lack of lipase binding to mixed protein-dicaprin films or to a desorption of lipase from the interface when inhibitory protein was added later. Since a large proportion of the lipid film remained potentially accessible to the enzyme in the presence of inhibitory protein, it was concluded that the observed decrease in lipase binding to the interface was due to a variation of the physiochemical properties of the lipid-water interface following binding of inhibitory protein. On the basis of the results presented here, it is proposed that mixed protein-glyceride films could be used to characterize the interaction of various lipases with lipid substrates and to classify these enzymes according to their penetration power.     

Function of the prosequence for in vivo folding and secretion of active Rhizopus oryzae lipase in Saccharomyces cerevisiae

The role of the prosequence of Rhizopus oryzae lipase (ROL) with a preprosequence was analyzed by an expression system using Saccharomyces cerevisiae. When the mature portion of ROL (mROL) fused to the pre-alpha-factor leader sequence was expressed, secretion of active mROL was not observed. However, when mROL was synthesized together with the prosequence in trans (individually and coincidentally), secretion of active mROL was observed. The results indicate that the prosequence of ROL helped correct folding of mROL and its subsequent secretion from the yeast cells, and that physical linkage (cis) of the prosequence to the mature region was not prerequisite. From the expression of the ROL mutants with deletions at the N-terminal end of the prosequence together with mROL in trans, the residues from 20 to 37 in the prosequence were essential for the secretion, and those from 38 to 57 were essential for the formation of the active ROL and might play a role as an intramolecular chaperone. The results using the fragment of the prosequence confirmed that these residues (20-57) were significant for in vivo folding and secretion of active mROL.     

High-level expression of Rhizopus niveus lipase in the yeast Saccharomyces cerevisiae and structural properties of the expressed enzyme

Rhizopus niveus lipase (RNL) has a unique structure consisting of two noncovalently bound polypeptides (A-chain and B-chain). To improve this enzyme's properties by protein engineering, we have developed a new expression system for the production of recombinant lipase in the yeast Saccharomyces cerevisiae. For the present study, we developed a more efficient expression system using the strain ND-12B and the multicopy-type plasmid pJDB219. We purified two types of recombinant lipases, each to a single peak by gel-filtration HPLC, although they were found to be heterogeneous by SDS-PAGE. Analysis of reversed-phase HPLC, N-terminal amino acid sequence, and sugar content showed that the difference between the two types of lipases was due mainly to their sugar content (high or low mannose type). Moreover, there were two species within each type of lipase. One kind was processed to the A-chain and B-chain as in the native lipase, while the other remained unprocessed. Although these yeast-purified lipases contained several posttranslational modifications and different glycosylations, their secondary structures were the same as those of the native lipase as measured by circular dichroism spectra and determination of disulfide bonding. This suggests that protein folding of the recombinant lipase occurred correctly in yeast.     

Synthesis of various kinds of esters by four microbial lipases

Ester synthesis by microbial lipases, using homogeneous enzyme preparations, were investigated. The amount of synthesized ester was estimated by alkalimetry, and products were identified by thin-layer chromatography and infrared spectroscopy. Lipases from Aspergillus niger, Rhizopus delemar, Geotrichum candidum and Penicillium cyclopium synthesized esters from oleic acid and various primary alcohols. Only Geotrichum candidum lipase synthesized esters of secondary alcohols. Esters of tertiary alcohols, phenols or sugar alcohols were not synthesized by any lipase. Rather high concentrations of alcohol were required to synthesize the esters of ethylene glycol, propylene glycol or trimethylene glycol. Lipases from Aspergillus niger and Rhizopus delemar synthesized oleyl esters of various fatty acids and some dibasic acids. In contrast, lipases from Geotrichum candidum and Penicillium cyclopium synthesized oleyl esters only from medium or long chain fatty acids.     

Production of recombinant Rhizopus oryzae lipase by the yeast Yarrowia lipolytica results in increased enzymatic thermostability

The gene encoding Rhizopus oryzae lipase (ROL) was expressed in the non-conventional yeast Yarrowia lipolytica under the control of the strong inducible XPR2 gene promoter. The effects of three different preprosequence variants were examined: a preprosequence of the Y. lipolytica alkaline extracellular protease (AEP) encoded by XPR2, the native preprosequence of ROL, and a hybrid variant of the presequence of AEP and the prosequence of ROL. Lipase production was highest (7.6 U/mL) with the hybrid prepropeptide. The recombinant protein was purified by ion-exchange chromatography. The ROL included 28 amino acids of the C-terminal region of the prosequence, indicating that proteolytic cleavage occurred below the KR site through the activity of the Kex2-like endoprotease. The optimum temperature for recombinant lipase activity was between 30 and 40 °C, and the optimum pH was 7.5. The enzyme was shown not to be glycosylated. Furthermore, recombinant ROL exhibited greater thermostability than previously reported, with the enzyme retaining 64% of its hydrolytic activity after 30 min of incubation at 55 °C.     

Cloning, expression and characterization of a cDNA encoding a lipase from Rhizopus delemar.

A lambda gt11 cDNA library was constructed in Escherichia coli using poly(A)-selected mRNA from the fungus, Rhizopus (Rp.) delemar. Lipase-producing members of the library were identified by means of a phenotypic score wherein the release of fatty acids by lipase causes a characteristic color change in the growth medium. One such isolate contained a 1287-bp insert (LIP cDNA) which hybridizes to 1.25- to 1.35-kb mRNA species from Rp. delemar. The lipase produced in E. coli containing the LIP cDNA exhibits the same substrate selectivity as the authentic fungal enzyme, hydrolyzing ester bonds at the stereospecific numbering (sn) sn-1 and sn-3, but not the sn-2, positions of triglycerides. The complete nucleotide sequence of the LIP cDNA was determined. By reference to the N-terminal sequence of authentic Rp. delemar lipase, the lipase-encoding region was identified within this fragment. The LIP cDNA encodes a putative preprolipase consisting of a 26-amino-acid(aa) signal sequence, a 97-aa propeptide, and a 269-aa mature enzyme. The predicted mature lipase has the same molecular weight and aa composition as that of Rp. delemar, is highly homologous to that produced by the fungus Rhizomucor miehei, and contains the consensus pentapeptide (Gly-Xaa-Ser-Yaa-Gly) which is conserved among lipolytic enzymes. It is concluded that the LIP cDNA is an essentially full-length analogue of the lipase-encoding gene of Rp. delemar. The lipase encoded by the LIP cDNA occupies a cytoplasmic location when synthesized in E. coli. Unprocessed forms of the lipase accumulate in E. coli.     

Efficient heterologous expression and secretion in Aspergillus oryzae of a llama variable heavy-chain antibody fragment VHH against EGFR

We have constructed a filamentous fungus Aspergillus oryzae that secretes a llama variable heavy-chain antibody fragment (V(HH)) that binds specifically to epidermal growth factor receptor (EGFR) in a culture medium. A major improvement in yield was achieved by fusing the V(HH) with a Taka-amylase A signal sequence (sTAA) and a segment of 28 amino acids from the N-terminal region of Rhizopus oryzae lipase (N28). The yields of secreted, immunologically active anti-EGFR V(HH) reached 73.8?mg/1 in a Sakaguchi flask. The V(HH) fragments were released from the sTAA or N28 proteins by an indigenous A. oryzae protease during cultivation. The purified recombinant V(HH) fragment was specifically recognized and could bind to the EGFR with a high affinity.     

Inhibition of pancreatic and microbial lipases by proteins

We have compared the effect of several proteins, including melittin, beta-lactoglobulin A, serum albumin, ovalbumin and myoglobin, on the hydrolysis of tributyrin and triolein by lipases from various origins. All proteins tested inactivate pancreatic lipase in absence of colipase and bile salt. Inhibition is not significantly reversed by colipase in absence of bile salt except in systems containing tributyrin and melittin or triolein and beta-lactoglobulin A. In all other cases, activation of pancreatic lipase by colipase in presence of inhibitory protein requires the presence of bile salt. Lipase from Rhizopus delemar is also inhibited by the proteins that inactivate pancreatic lipase. In contrast, the activity of lipase from Rhizopus arrhizus is not affected by the proteins in the same concentration range. Inhibition of lipase activity by amphiphiles such as proteins or detergents appears to be a general phenomenon not directly related to a decrease in tension at the triacylglycerol-water interface. Inhibition could be the result of desorption of lipase from its substrate due to a change in interfacial quality.     

Esterification reactions catalyzed by lipases in microemulsions: the role of enzyme localization in relation to its selectivity

The activity of lipases from Rhizopus delemar, Rhizopus arrhizus, and Penicillium simplicissimum entrapped in microemulsions formulated by bis-(2-ethylhexyl)sulfo-succinate sodium salt (AOT) in isooctane has been studied in esterification reactions of various aliphatic alcohols with fatty acids. The effect of the nature of the fatty acids (chain length) and of the alcohols (primary, secondary, or tertiary; chain length; cyclic structures) on the lipase activities was investigated in relation to the reverse micellar structure. The lipases tested showed a selectivity regarding the structure of the substrates used when hosted in the AOT/isooctane microemulsion systems. Penicillium simplicissimum lipase showed higher reaction rates in the esterification of long chain alcohols as well as secondary alcohols. Primary alcohols had a low reaction rate and tertiary a very slow rate of esterification. Long chain fatty acids were better catalyzed as compared to the shorter ones. Rhizopus delemar and R. arrhizus lipases showed a preference for the esterification of short chain primary alcohols, while the secondary alcohols had a low rate of esterification and the tertiary ones could not be converted. The reaction of medium chain length fatty acids was also better catalyzed than in the case of the long ones. The observed lipase selectivity appeared to be related to the localization of the enzyme molecule within the micellar microstructure due to the hydrophobic/hydrophilic character of the protein. The reverse micellar structural characteristics, as well as the localization of the enzyme, were examined by fluorescence quenching measurements and spectroscopical studies. (c) 1993 John Wiley & Sons, Inc.     

Kinetic Properties of a Novel Fusarium solani (phospho)lipase: A Monolayer Study

Using the monomolecular film technique, we studied interfacial properties of Fusarium solani lipase (FSL). This lipolytic enzyme was found to be unique among the fungal lipases possessing not only a lipase activity but also a high phospholipase one.The FSL was able to hydrolyze dicaprin films at various surface pressures. The surface pressure dependency, the stereospecificity, and the regioselectivity of FSL were performed using optically pure stereoisomers of diglyceride (1,2‐sn‐ dicaprin and 2,3‐sn‐dicaprin) and a prochiral isomer (1,3‐sn‐dicaprin) spread as monomolecular films at the air–water interface. The FSL prefers adjacent ester groups of the diglyceride isomers (1,2‐sn‐dicaprin and 2,3‐sn‐dicaprin) at low and high surface pressures. Furthermore, FSL was found to be markedly stereospecific for the sn‐1 position of the 1,2‐sn‐enantiomer of dicaprin at both low and high surface pressures.Moreover, FSL shows high activities on phospholipids monolayers. However, this enzyme displays high preference to zwitterionic phospholipids compared to the negatively charged ones. Chirality, 25:35‐38, 2012. © 2012 Wiley Periodicals, Inc.     

Purification and characterization of an extracellular lipase from a thermophilic Rhizopus oryzae strain isolated from palm fruit

We have isolated a lipolytic strain from palm fruit that was identified as a Rhizopus oryzae. Culture conditions were optimized and highest lipase production amounting to 120 U/ml was achieved after 4 days of cultivation. The extracellular lipase was purified 1200-fold by ammonium sulfate precipitation, sulphopropyl-Sepharose chromatography, Sephadex G 75 gel filtration and a second sulphopropyl-Sepharose chromatography. The specific activity of the purified enzyme was 8800 U/mg. The lipolytic enzyme has a molecular mass of 32 kDa by SDS-polyacrylamide gel electrophoresis and gel filtration. The enzyme exhibited a single band in active polyacrylamide gel electrophoresis and its isoelectric point was 7.6. Analysis of Rhizopus oryzae lipase by RP-HPLC confirmed the homogeneity of the enzyme preparation. Determination of the N-terminal sequence over 19 amino acid residues showed a high homology with lipases of the same genus. The optimum pH for enzyme activity was 7.5. Lipase was stable in the pH range from 4.5 to 7.5. The optimum temperature for lipase activity was 35 degrees C and about 65% of its activity was retained after incubation at 45 degrees C for 30 min. The lipolytic enzyme was inhibited by Triton X100, SDS, and metal ions such as Fe(3+), Cu(2+), Hg(2+) and Fe(2+). Lipase activity against triolein was enhanced by sodium cholate or taurocholate. The purified lipase had a preference for the hydrolysis of saturated fatty acid chains (C(8)-C(18)) and a 1, 3-position specificity. It showed a good stability in organic solvents and especially in long chain-fatty alcohol. The enzyme poorly hydrolyzed triacylglycerols containing n-3 polyunsaturated fatty acids, and appeared as a suitable biocatalyst for selective esterification of sardine free fatty acids with hexanol as substrate. About 76% of sardine free fatty acids were esterified after 30 h reaction whereas 90% of docosahexaenoic acid (DHA) was recovered in the unesterified fatty acids.     

Kinetic properties of turkey pancreatic lipase: a comparative study with emulsified tributyrin and monomolecular dicaprin

Using the classical emulsified system and the monomolecular film technique, we compared several interfacial properties of turkey pancreatic lipase (TPL) and human pancreatic lipase (HPL). TPL, like HPL, presented the interfacial activation phenomenon when vinyl ester was used as substrate. In the absence of colipase and bile salts, using tributyrin emulsion or monomolecular films of dicaprin at low surface pressure, TPL, unlike HPL, hydrolyzes pure tributyrin emulsion as well as dicaprin films maintained at low surface pressures. TPL was also able to hydrolyze triolein emulsion in the absence of any additive and despite the accumulation of long-chain free fatty acids at the interface. The difference of behaviors between TPL and HPL can be explained by the penetration power of each enzyme. The enzyme that presents the maximal pi(c) (TPL) interacts more efficiently with interfaces, and it is not denaturated at high interfacial energy. Turkey pancreatic lipase is more active on rac-dicaprin than HPL; a maximal ratio of 9 was found between the catalytic activities of the two lipases measured at their surface pressure optima (20 mN m(-1)). A kinetic study on the surface pressure dependency, stereospecificity, and regioselectivity of TPL was performed using enantiopure diglyceride (1,2-sn-dicaprin and 2,3-sn-dicaprin) and a prochiral isomer (1,3-dicaprin) that were spread as monomolecular films at the air-water interface. At low surface pressure (15 mN m(-1)), TPL acts preferentially on primary carboxylic ester groups of the diglyceride isomers (1,3-dicaprin), but at high surface pressure (23 mN m(-1)), this enzyme prefers both adjacent ester groups of the diglyceride isomers (1,2-sn-dicaprin and 2,3-sn-dicaprin). HPL prefers adjacent ester groups of the diglyceride isomers (1,2-sn-dicaprin and 2,3-sn-dicaprin). Furthermore, TPL was found to be markedly stereospecific for the sn-1 position of the 1,2-sn-enantiomer of dicaprin at low surface pressure (15 mN m(-1)), while at high surface pressure (23 mN m(-1)), this lipase presents a stereopreference for the sn-3 position of the 2,3-sn-enantiomer of dicaprin. HPL is stereospecific for the sn-1 position of the 1,2-sn-enantiomer of dicaprin both at 15 and 23 mN m(-1).