A geometric morphometric analysis of hominin upper premolars. Shape variation and morphological integration

This paper continues the series of articles initiated in 2006 that analyse hominin dental crown morphology by means of geometric morphometric techniques. The detailed study of both upper premolar occlusal morphologies in a comprehensive sample of hominin fossils, including those coming from the Gran Dolina-TD6 and Sima de los Huesos sites from Atapuerca, Spain, complement previous works on lower first and second premolars and upper first molars. A morphological gradient consisting of the change from asymmetric to symmetric upper premolars and a marked reduction of the lingual cusp in recent Homo species has been observed in both premolars. Although percentages of correct classification based on upper premolar morphologies are not very high, significant morphological differences between Neanderthals (and European middle Pleistocene fossils) and modern humans have been identified, especially in upper second premolars. The study of morphological integration between premolar morphologies reveals significant correlations that are weaker between upper premolars than between lower ones and significant correlations between antagonists. These results have important implications for understanding the genetic and functional factors underlying dental phenotypic variation and covariation.     

Geometric morphometric analysis of the crown morphology of the lower first premolar of hominins, with special attention to Pleistocene Homo

This article is the third of a series that explores hominin dental crown morphology by means of geometric morphometrics. After the analysis of the lower second premolar and the upper first molar crown shapes, we apply the same technique to lower first premolar morphology. Our results show a clear distinction between the morphology seen in earlier hominin taxa such as Australopithecus and African early Homo, as well as Asian H. erectus, and more recent groups such as European H. heidelbergensis, H. neanderthalensis, and H. sapiens. The morphology of the earlier hominins includes an asymmetrical outline, a conspicuous talonid, and an occlusal polygon that tends to be large. The morphology of the recent hominins includes a symmetrical outline and a reduced or absent talonid. Within this later group, premolars belonging to H. heidelbergensis and H. neanderthalensis tend to possess a small and mesiolingually-displaced occlusal polygon, whereas H. sapiens specimens usually present expanded and centered occlusal polygons in an almost circular outline. The morphological differences among Paranthropus, Australopithecus, and African early Homo as studied here are small and evolutionarily less significant compared to the differences between the earlier and later homin taxa. In contrast to the lower second premolar and the upper first molar crown, the inclusion of a larger hominin sample of lower first premolars reveals a large allometric component.     

中国近代人群上颌前臼齿釉质-齿质连接面形状的三维几何形态测量

牙齿的釉质-齿质连接面(EDJ或Enamel-dentine junction)是釉质表面(OES或Outer enamel surface)形态的发生基础,其形态特征在牙齿发育早期形成,与遗传因素密切相关。为探讨EDJ形状在近代人群中的变异特点,本文使用显微断层扫描技术(micro-CT或micro-computed tomography)扫描了100例采自华中地区近代农业人群的上颌前臼齿(P~3和P~4各50例),并复原了EDJ表面三维结构。采用基于30个标志点(landmark)和半标志点(semi-landmark)的三维几何形态测量量化了上颌前臼齿EDJ表面形状。结果显示,牙齿内部舌侧尖区域变异程度较颊侧尖大。在人群内部,上颌前臼齿的变异方式主要表现在1)颊舌尖相互靠近或远离造成的咬合面深浅的差别;2)颊舌尖齿质最高点(dentine horn)相对高度的差异;3)舌侧尖近远中方向尺寸的变化;4)P~3颊侧尖近中脊的内收与外扩造成的整个轮廓形状的对称性变化;5)P~4整个咬合面轮廓MD/BL比值的大小差别。基于以上发现,本文进一步探讨了上颌前臼齿EDJ形状在两性或不同时代标本之间是否存在差异。平均形状的比较发现男性上颌前臼齿的舌尖相对较宽,颊侧尖近中脊相对较低。但主成分分析(Principal component analysis)和置换检验(Permutation test)显示两性差异未达到显著水平。同样,从新石器时代以来的各样本组之间在EDJ形状上的差别也没有达到统计上的显著水平。这一结果提示中国近代人群上颌前臼齿EDJ表面形状的变异特点至少可以追溯到全新世早期(本文使用标本最早来自距今6000-7000年前的新石器时代阶段)。未来EDJ的三维几何形态测量可通过扩大标本数量进一步探讨不同性别、不同地区人群、不同演化阶段之间的差异。     

山西垣曲先炭兽类一新种

本文主要报道1983年9月,在山西省垣曲县寨里发现的一件较完整的先炭兽类老年个体上颌骨.带有颇为完整的左、右齿列. I~1-P~2 各齿前、后均有较长的齿隙. P~1、P~2、P~3 前的齿隙颌骨上,保留有乳前臼齿的齿槽.这块标本在大小及形态特征上,与目前所知先炭兽属 Anthracokeryx 中任何种都有相当大的差异.它代表了该属中的一个新种.     

Modular Wear Facet Nomenclature for mammalian post-canine dentitions

Abstract

Dental wear facets on the occlusal surface of premolars and molars are traces of their main function, the mastication and therefore reflect masticatory movements and also paramasticatory (i.e. non-dietary use of teeth) behavior. Here we present the Modular Wear Facet Nomenclature applicable to most mammalian dentitions. Topographic positions of wear facets in relation to the major cusps and crests of the teeth are used to designate the areas of the occlusal surface the facets occupy (e.g. their mesial, distal, lingual, or buccal position). Previous published systems for labeling wear facets have been inconsistent with each other. Therefore, we provide a synoptic review of the most widely-used terminologies, and introduce the alternative Modular Wear Facet Nomenclature. This nomenclature aims to overcome the difficulties caused by the existing inconsistent wear facet terminologies. Our new approach is applicable to dentitions where the occlusal morphology does not change significantly for most of the lifetime of the animal. In those dentitions, the primary occlusal surfaces are not significantly modified as wear facets become more extensive with wearing. This appears to be a common pattern in pre-tribosphenic, tribosphenic molars, and the teeth derived from tribosphenic precursors (e.g. bunodont molar morphologies). In teeth where the secondary occlusal surface is functionally intensely modified (i.e. high-crowned and evergrowing teeth with large areas of dentine exposed) any facet labeling system appears to be challenging, since the identification of individual facets is blurred and their spatial position may be indeterminable.     

The relation of canine size to pattern and extent of attrition in baboons

For most genera of animals the association between dental morphology and diet is such that inferences concerning the diet can be made on the basis of the dentition alone. The canine is the one tooth that appears exempt from such generalisation and exhibits a wide range of variability of size and shape in all groups. In order to determine the effect of dimorphism of the canine on the dental apparatus, male and female specimens of Theropithecus and Papio baboons were examined. Occlusal relationships and dental pathology for 21 Theropithecus and 40 Papio skulls were recorded, and crown height measurements obtained for maxillary incisors, buccal and lingual molar cusps. Attrition was the most common and severe cause of abscess formation in older animals: the pattern of attrition differed in adult males and females, the latter showing more wear of the incisor and lingual molar cusps. Partial correlations for incisor, buccal and lingual molar cuspal crown height show a significant correlation between incisor and lingual cusp attrition in juveniles of both sexes and adult females (p < 0.01). Adult males show no correlation of attrition. It is proposed that the correlation of incisor and lingual molar cusp attrition is associated with anterior-posterior grinding movements, such as take place during incision, that the large canine present in the male limits such movements, the sharp blade-like canine being employed as a cutting tool. This use of the canine by reducing functional demands on other teeth, prolongs the utility of the dental apparatus, and hence the lifespan of its possessor.     

Individual variation in enamel structure of human mandibular first premolars

Nine human mandibular first premolars were examined to assess variation in external morphology and enamel structural organization within a tooth type. The relationship of enamel ultrastructure to gross dental morphology was also studied. The teeth were cut in the mesiodistal direction just lingual to the buccal cusp, and etched. Montages were constructed of the cut enamel surface photographed in the scanning electron microscope at 100 X magnification. Parameters were measured and correlation coefficients were calculated for the comparison of various odontometric features. The mesiodistal and buccolingual dimensions were highly correlated and the occlusal thickness of enamel was significantly correlated to crown height but not crown width. Hunter-Schreger bands were less pronounced in fossa areas than at lateral aspects, cusps, or ridges; these bands were directly related to the geometry of the tooth. It was concluded that within this tooth type, there is a large amount of individual variation not only in gross morphology but also in enamel ultrastructure. This result underscores the fact that interspecific comparisons must be made with care.     

Studies of fossil hyaenas: affinities of Lycyaenops rhomboideae Kretzoi from Pestlorinc, Hungary

The holotype of the lower-middle Pliocene hyaenid Lycyaenops rhomboideae is redescribed and compared with contemporaneous hyaenids of the genera Lycyaena, Hyaenictis, Chasmaporthetes and Pliocmcuta. These comparisons show that the material represents a valid and distinct genus and species. The genus Lycyaenops is referred to the Chasmaporthetes lineage on the basis of its two-cusped m 1 talonid with reduced entoconid, reduced posterolingual cingulum cusp on p4 and premolar accessory cusps set in a straight line. It is distinguished from all other genera of that lineage by its smaller premolar accessory cusps, broad premolars and squared-off and very broad posterior premolar shelves. The species L. silberbergi, previously assigned to Chasmaporthetes, is also referred to Lycyaenops. It differs from L. rhomboideae in its greater development of the premolar accessory cusps and less developed posterior premolar shelves, but shares the broad, squared-off premolars. The interrelationships of Hyaenictis, Chasmaporthetes and Lycyaenops are at present best described by an unresolved trichotomy, with Lycyaena as its sister taxon.     

Hominin lower second premolar morphology: evolutionary inferences through geometric morphometric analysis

Mandibular premolars are increasingly used in taxon-specific diagnostic analyses of hominins. Among the principal difficulties in these evaluations is the absence of discrete, discernible, and comparable anatomical structures for rigorous quantitative assessment. Previous research has addressed either internal crown surface features (such as cusps and fossae) or the morphology of the crown outline. In the present paper, we integrate both types of information in the examination of morphological variation of lower P4s (n = 96) among various fossil hominin species with an emphasis on genus Homo. We use a set of 34 2D landmarks combining coordinate data from four classical dental landmarks on the occlusal surface and 30 sliding semilandmarks of the crown outline. Our results indicate that external shape variation is closely related to the configuration of the occlusal morphological features and influenced by dental size. The external and internal shapes of P4 are polymorphic but still useful in depicting a primitive-derived gradient. The primitive pattern seems to have been an asymmetrical contour with a mesially displaced metaconid, development of a bulging talonid, and a broad occlusal polygon. The trend toward dental reduction during the Pleistocene produced different morphological variants with a reduced occlusal polygon and decreased lingual occlusal surface in later Homo species. Homo heidelbergensis/neanderthalensis have fixed plesiomorphic traits in high percentages, whereas in modern humans a symmetrical outline with a centered metaconid and talonid reduction evolved.     

Occlusal Pattern in Paulchoffatiid Multituberculates and the Evolution of Cusp Morphology in Mammaliamorphs with Rodent-like Dentitions

Multituberculates developed a very complex masticatory apparatus during their long evolutionary history from the Jurassic to the Paleogene. Besides their rodent-like elongated incisors and diastemata, Cenozoic cimolodont Multituberculata display masticatory movements involving two distinct cycles in the mastication. An orthal slicing-crushing cycle associated with an enlarged lower fourth premolar precedes a palinal grinding cycle linked to upper molars with three longitudinal rows of cusps. With their plesiomorphic lower premolars and upper molars, the Late Jurassic/Early Cretaceous multituberculate family Paulchoffatiidae can provide the key for the understanding of the origin of the complex mastication of the Cimolodonta. Using for the first time propagation phase contrast Synchrotron X-Ray microtomography to perform both microwear and topographic analyses in order to characterize the mastication of Paulchoffatiidae, we digitized dental material from the Late Jurassic of the Guimarota Coal Mine (Leiria, Portugal) at the European Synchrotron Facility (Grenoble, France). Mastication in Paulchoffatiidae is characterized by a palinal grinding cycle. In contrast to Cimolodonta, no evidence of an orthal slicing-crushing cycle has been observed: the lower premolars mainly have a grinding function like the molars as they do exhibit buccal attrition facets bearing longitudinal striations. Nevertheless, the slightly oblique striations observed on the mesial part of the paulchoffatiid lower premolars possibly presage the orthal phase of the Cimolodonta. Our topographic analysis indicates that a strong relationship between individual cusp shape and direction of chewing is emphasized in rodents and rodent-like Mammaliamorpha such as Cimolodonta and Tritylodonta. Surprisingly, this relationship is not evident in Paulchoffatiidae. This unexpected result can be explained by the non-involvement in the attrition of many premolar cusps in Paulchoffatiidae, as indicated by our microwear analysis. The stronger the attrition, the more the direction of the masticatory movements influences the cusp morphology in Mammaliamorpha.     

Metric and morphological variability in the dentition of Colobine monkeys

A morphological study was performed using 97 Colobus polykomos and 41 Nasalis larvatus. The premolars and molars of these two taxa of leaf-eating monkeys were similar in that they possessed deeply grooved and highly pointed cusps. Of 7 dental traits investigated, 4 were significantly different between the 2 forms. Indeed, with 2 of these, the position of the lingual cusp on PM₄ and the number of cusps on PM³ displayed highly contrasting structures.Metric analysis was conducted using 47 C. polykomos and 37 N. larvatus specimens. Mesiodistal and buccolingual measurements were taken on the upper canine and all postcanine teeth. Sexual dimorphism was detected in most maxillary dental measurements and all mandibular estimates of both species. In all cases, males exceeded females in tooth diameter. Testing between species by sex revealed that C. polykomos was significantly larger in several canine and premolar dimensions while N. larvatus had significantly larger molar dimensions. An additional 73 measurements were selected to represent occluding dental structures and a morphological integration analysis was conducted. Results of this analysis indicated that C. polykomos possessed a C¹-PM₃ complex which was more highly intercorrelated whereas the broad lophed N. larvatus molars constituted a more highly correlated functional unit.It was suggested that the above differences between these two groups of leaf-eating monkeys probably resulted from inbreeding, isolation and drift.     

A geometric morphometric analysis of hominin upper first molar shape

Recent studies have revealed interesting differences in upper first molar morphology across the hominin fossil record, particularly significant between H. sapiens and H. neanderthalensis. Usually these analyses have been performed by means of classic morphometric methods, including the measurement of relative cusp areas or the angles defined between cusps. Although these studies have provided valuable information for the morphological characterization of some hominin species, we believe that the analysis of this particular tooth could be more conclusive for taxonomic assignment. In this study, we have applied geometric morphometric methods to explore the morphological variability of the upper first molar (M(1)) across the human fossil record. Our emphasis focuses on the study of the phenetic relationships among the European middle Pleistocene populations (designated as H. heidelbergensis) with H. neanderthalensis and H. sapiens, but the inclusion of Australopithecus and early Homo specimens has helped us to assess the polarity of the observed traits. H. neanderthalensis presents a unique morphology characterized by a relatively distal displacement of the lingual cusps and protrusion in the external outline of a large and bulging hypocone. This morphology can be found in a less pronounced degree in the European early and middle Pleistocene populations, and reaches its maximum expression with the H. neanderthalensis lineage. In contrast, modern humans retain the primitive morphology with a square occlusal polygon associated with a round external outline.     

广西崇左智人洞早期现代人龋病及牙槽骨异常研究

2007-2008年, 广西崇左智人洞发现了3件智人化石标本, 智人Ⅱ号为下颌右侧第3臼齿伴有部分下颌骨, 智人Ⅱ号为游离的下颌右侧第2或第3臼齿, 智人Ⅲ号为人类下颌骨中间部分残段。釉系测年结果显示其为距今10万年左右, 是目前东亚地区最古老的早期现代人。这3件化石标本显示出一系列的病理及异常现象:智人Ⅱ号牙齿齿根大部分暴露, 牙槽骨萎缩, 个体生前患有严重的牙周炎; 智人Ⅱ号牙齿龋病严重伴随齿根部大区域突起的白色钙化状的牙骨质增生, 个体生前可能患有严重的牙周组织炎症; 智人Ⅲ号下颌骨牙列拥挤, 双侧中门齿扭转, 双侧前臼齿对称性出现根尖周炎症状, 最大可能个体生前双侧前臼齿具有畸形中央尖, 突出的牙尖折断后牙髓感染导致根尖部牙槽腔扩大。更新世古人类出现龋病的情况非常罕见, 智人洞发现的人类龋齿是目前我国乃至东亚地区报道的最早的龋病病例。智人Ⅲ号下颌显示的牙列拥挤与牙齿扭转对于探讨人类咀嚼器官的退行性演化有重要参考价值。     

Diet and dental topography in pitheciine seed predators

Pitheciines (Pithecia, Chiropotes, and Cacajao) are a specialized clade of Neotropical seed predators that exhibit postcanine teeth with low and rounded cusps and highly crenulated occlusal surface enamel. Data on feeding ecology show that Pithecia consumes proportionally more leaves than other pitheciine species, and comparative studies demonstrate its greater molar relief and relative shearing potential. However, data on pitheciine food mechanics show that Pithecia masticates seeds with greater crushing resistance than those preferred by Chiropotes. This variation predicts an opposing morphology characterized by low and more rounded occlusal surfaces in Pithecia. We build on previous research using new methods for molar surface shape quantification by examining pitheciine second molar shearing crest length, occlusal relief, surface complexity, and surface curvature relative to nonseed specializing platyrrhines and within the context of the observed interspecific variation in pitheciine feeding ecology. Consistent with the previous analyses, our findings demonstrate that pitheciine molars exhibit low shearing, relief, and curvature compared with nonseed predators, independent of phylogeny. Pitheciines also exhibit highly “complex” occlusal topography that promotes the efficient breakdown of tough seed tissues. Overall, Pithecia, Chiropotes, and Cacajao share a similar topographic pattern, suggesting adaptation to foods with similar structural and/or mechanical properties. However, Cacajao differs in surface complexity, which reflects some variation in its feeding ecology. Contrary to the predictions, Pithecia and Chiropotes do not differ in any of the topographic variables examined. The range of demands imposed on the postcanine teeth of Pithecia might therefore select for an average topography, one that converges on that of Chiropotes. Am J Phys Anthropol, 2013. © 2012 Wiley Periodicals, Inc.     

贵州盘县大洞更新世灵长类化石

本文记述贵州盘县大洞中－晚更新世洞穴堆积中的猴类化石,数量不多,被归入短尾猴（Ｍａｃａｃａａｒｃｔｏｉｄｅｓ）,熊猴（Ｍ．ｃｆ．ａｓｓａｍｅｎｓｉｓ）和疣猴亚科（Ｃｏｌｏｂｉｎａｅ）本研究为南方洞穴堆积单个灵长类牙齿的鉴定积累一些资料,同时也扩大了贵州省猴类化石的分布。     

The mechanical significance of the occlusal geometry of great ape molars in food breakdown

Analyses of dental function are an essential component of the study of human evolution. However, with few exceptions, they have utilized the traditional analogizing method of comparative anatomy, and have assumed rather than demonstrated that proposed adaptive characters confer a performance benefit. Since food reduction is a mechanical process, it is appropriate to measure performance using mechanical parameters, specifically the ability of a given morphology to induce failure in food particle by either of the two major regimes: crush and shear, corresponding to simple stresses (tensile and compressive) and shear stress, respectively. We apply finite elements stress analysis to model the relationship between the angulation of the intercuspal occlusal surfaces in a “puncture crushing” mode of mastication. On the basis of morphological data acquired from sectioned great ape molars, we have predicted the nature, magnitude and distribution of stress in a standard food particle by models representing each morphotype. Results indicate that the blunt-cusped molars ofHomo, the gradually-sloping supporting (buccal) cusps but high-angled guiding (lingual) cusps of the lower molars ofPan, and the high angled occlusal surfaces ofGorillaare all more likely to fracture small food particles by shear, while the gradually sloping occlusal surfaces ofPongomolars are more likely to break them down by “crush”. Mechanisms of food failure induced by molars ofPanandHomowill vary according to the orientation of the tooth–food contacting surfaces, which in turn will vary according to the size of the food particle. These genera may be able to break food down either by shear or by “crush”.     

Genetic structure of a tribal population, the Yanomama Indians. XIII. Dental microdifferentiation.

Data are presented on the frequency of the following eight dental traits in 635 Yanomama and 65 Makiritare Indians: upper central incisor rotation or winging, shoveling of maxillary incisors, maxillary molar hypocone reduction, Carabelli's trait, mandibular molar cusp number, mandibular molar cusp pattern rotation of second lower premolar, and pattern of second lower premolar cusps. Yanomama dentition is unusual in the high frequency of six cusps on the mandibular molars. There is marked dental microdifferentiation between villages; significant agreement was observed between a matrix of pairwise "dental distances" based on six morphological traits and corresponding matrices based on 11 genetic systems and on geographic location.     

The morphology and wear of the lingual notch in macaques and langurs

Although interspecific differences in the relative development of molar occlusal features have been documented for most primate species, wear-related changes in these features are only beginning to be understood. In the present study, the notch between the metaconid and entoconid of M₂ was examined in a skeletal sample of Macaca fascicularis, Presbytis cristatus, and Presbytis rubicunda from the Museum of Comparative Zoology at Harvard University. Photogrammetric analyses yielded X, Y, and Z coordinates that were used to compute three angular measurements and two length measurements at the lingual notch. Statistical analyses of measurements from unworn dentitions indicated that the mesial slope of the entoconid is steeper than the distal slope of the metaconid in all three species. In addition, interspecific comparisons demonstrated that P. cristatus has the steepest lingual notch bordered by the largest molar shearing crests, while P. rubicunda and M. fascicularis have molar shearing crests of similar size, with P. rubicunda merely having higher cusps that are closer together than those of M. fascicularis. Fanally, P. cristatus shows a smaller decrease in lingual cusp relief with wear than M. fascicularis, while P. cristatus and P. rubicunda probably show similar decreases in lingual cusp relief with wear. The differences in wear-related changes in lingual cusp relief between M. fascicularis and P. cristatus may well be related to the frugivorous/folivorous dietary differences between these species.     

MOLAR OCCLUSION IN LATE TRIASSIC MAMMALS

1. A new genus and species of late Triassic mammal, Megazostrodon rudnerae, from Lesotho in southern Africa is described. The molars are similar to those of the British Eozostrodon parvus except that they are slightly larger and the upper molars have a large external cingulum supporting well-developed cusps. 2. Molar occlusion is discussed in two groups of late Triassic mammals: Eoxostrodon and the closely related Megazostrodon on one the hand and the unnamed primitive symmetrodonts on the other. It is shown that in Eoxostrodon the upper and lower molars did not have matching occlusal surfaces upon eruption but that wear produced matching occlusal surfaces. These surfaces are confined to the internal surface of the upper molars and the external surface of the lower molars and form a series of wide-angled triangles. The main cusp of an upper molar occluded between the main and posterior subsidiary cusp of the lower molar and the main cusp of the lower molar occluded between the main and anterior subsidiary cusp of the upper molar, 3. It is shown that the molars of Docodon and HaIdanodon were possibly derived from those of a primitive mammal such as Eozostrodon. The transition involved the development on the upper molars of an internal extension which, as it increased in size, established contact with the dorsal surfaces of two adjacent lower molars. The process involved is fundamentally different from that leading to tribosphenic molars. 4. In Megaxostrodon the main cusp of the upper molars occluded between the posterior and anterior subsidiary cusps of two adjacent lower molars, i.e. more posteriorly than in Eozostrodon. Primitive Rhaetic symmetrodonts were derived from mammals which had this type of occlusion and which were also closely related to Eoxostrodon and Megaxostrodon. The transition involved a rotation of the subsidiary cusps of the upper molars externally and those of the lower molars internally. This rotation increased the shearing surfaces between occluding upper and lower molars. Cusp rotation was carried further in the acute-angled symmetrodonts (Peralestes and Spalacotherium) and pantotheres. It appears that marked cusp rotation was coupled with the acquisition of transverse movements of the lower jaw during mastication. Transverse movement was apparently not possible in cynodonts, in Eoxostrodon (and related forms) and in Docodon. 5. The evolution of therian molars involves cusp rotation as originally proposed by the Cope—Osborn theory. Criticisms of the Cope—Osborn theory are re-evaluated in light of the new late Triassic material. 6. In Rhaetic symmetrodonts, molar wear produces matching occlusal facets, but the amount of attrition necessary to produce these facets was considerably less than in Eoxostrodon. In acute-angled symmetrodonts and in pantotheres, the molars erupt with more precise occlusal surfaces and attrition was not necessary to produce matching surfaces. 7. On the basis of the structure of the molar teeth it was concluded that Eozostrodon, Megazostrodon and Erythrotherium were closely related to the Rhaetic symmetrodonts. Slightly different occlusal relationships between upper and lower molars indicated that in these early mammals constant occlusal relations were being established. 8. Primitive cynodonts, such as Thrinaxodon, are characterized by alternate tooth replacement; there is a total lack of a constant occlusal relationship between upper and lower postcanine teeth. In Thrinaxodon individual postcanines were replaced several times. The crown structures of successive generations of postcanines were different so that a freshly erupted postcanine tooth had a crown structure quite distinct from the tooth which it replaced. It has been shown that the crown structure of one of the generations of postcanine teeth of Thrinaxodon is almost identical to that of Eozostrodon except that Thrinaxodon postcanines have a single root, On the basis of this similarity and the over-all structure of the primitive cynodont skull, it was concluded that Rhaetic mammals (excluding ictidosaurs and haramyids) could be derived from primitive cynodonts. 9. All the orders of Jurassic mammals (with the possible exception of multituber-culates) were probably derived from late Triassic mammals. The apparent close relationship of late Triassic mammals is evidence of a monophyletic origin of this class.     

秦岭野生大熊猫牙齿的形态机能

大熊猫(Ailuropoda melanoleuca)是国家一级保护动物,被誉为国宝.牙齿作为大熊猫消化器官之一,相对于其他动物而言,大熊猫牙齿有其自身的构造特点.以往学者和专家对大熊猫牙齿形态的研究侧重于为大熊猫的种群分类寻找根据(Dvadi,1869; Milne-Edwards,1870;王将克,1974),更多关注牙齿在大熊猫进化、演变过程中的意义(王令红等,1982;黄万波,1993).研究的齿位大多局限于臼齿(张鹤宇和刘理,1959),所得结果或数据并不详细和全面.此外,还有一些学者对大熊猫牙齿釉质的超微组织结构进行研究(赵资奎等,1984 ).