Flow injection chemiluminescence determination of naphazoline hydrochloride in pharmaceuticals

A simple and sensitive flow injection chemiluminescence (FI‐CL) method was developed for the determination of naphazoline hydrochloride (NPZ). The method is based on the enhancing effect of NPZ on the weak CL signal from the reaction of KIO₄ with H₂O₂. Experimental parameters that affected the CL signal, including the pH of the KIO₄ solution, concentrations of KIO₄, H₂O₂ and disodium‐EDTA and flow rate were optimized. Under the optimum conditions, the increment of CL intensity was linearly proportional to the concentration of NPZ in the range 5.0 × 10^?6 to 70 × 10^?6 mol/L. The detection limit was 1.0 × 10^?6 mol/L and the relative standard deviation for 50 × 10^?6 mol/L NPZ solution was 2.8% (n = 11). In addition, a high throughput of 120 samples/h was achieved. The utility of this method was demonstrated by determining NPZ in pharmaceuticals. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of oxytetracycline hydrochloride in milk and egg white samples using Ru(bipy)32+–Ce(SO4)2 chemiluminescence

A novel, rapid and sensitive chemiluminescence (CL) method for the determination of oxytetracycline hydrochloride (OTCH) is described in this paper. The presented method was based on the fact that OTCH could immensely enhance the CL of the reaction of cerium sulfate and tris(2,2‐bipyridyl) ruthenium (II) in acidic medium. Under optimal experimental conditions, CL intensity was favorably linear for OTCH in the range 5.0 × 10^?7 to 5.0 × 10^?5 g/ml, with a detection limit of 1.5 × 10^?7 g/ml (S/N = 3). The relative standard detection was 4.76% for 5.0 × 10^?6 g/ml (n = 11). This method was successfully applied to the analysis of OTCH in milk and egg white samples. According to the results of the kinetic curves for OTCH in the Ru(bipy)₃²⁺–Ce(SO₄)₂ CL system, together with CL and ultraviolet (UV)–visible spectra, the possible mechanism of the CL reaction is discussed briefly.     

A flow injection chemiluminescence method for the determination of lincomycin in serum using a diperiodato-cuprate (III)-luminol system

In this paper, the novel trivalent copper–periodate complex {K₅[Cu(HIO₆)₂], DPC} has been applied in a luminol‐based chemiluminescence (CL) reaction. Coupled with flow injection (FI) technology, the FI‐CL method was proposed for the determination of lincomycin hydrochloride. The CL reaction between luminol and DPC occurred in an alkaline medium. The CL intensity could be greatly enhanced by lincomycin hydrochloride. The relative CL intensity was proportional to the concentration of lincomycin hydrochloride in the range of 1 × 10^?8 to 5 × 10^?6 g mL^?1 and the detection limit was at the 3.5 × 10^?9 g mL^?1 level. The relative standard deviation at 5 × 10^?8 g mL^?1 was 1.7% (n = 9). The sensitive method was successfully applied to the direct determination of lincomycin hydrochloride (ng mL^?1) in serum. A possible mechanism of the lumonol–DPC CL reaction was discussed by the study of the CL kinetic characteristics and the spectra of CL reaction. The oxidability of DPC was studied by means of its electrochemical response. Copyright © 2010 John Wiley & Sons, Ltd.     

Multiway analysis applied to time‐resolved chemiluminescence for simultaneous determination of paracetamol and codeine in pharmaceuticals

This method is based on the enhancing effect of codeine (COD) and paracetamol (PAR) on the chemiluminescence (CL) reaction of Ru(phen)₃²⁺ with Ce(IV). In the batch mode, COD gives a relatively sharp peak with the highest CL intensity at 4.0 s, whereas the maximum CL intensity of the PAR appears at ~60 s after injection of Ce(IV) solution. Whole CL time profiles allowed use of the time‐resolved CL data in combination with multiway calibration techniques, as multiway partial least squares (N‐PLS), for the quantitative determination of both COD and PAR in binary mixtures. In this work, we found that the impact of Ce(IV) concentration on the CL intensity was different for COD and PAR. Therefore, a Ce(IV) concentration mode was added to the time and sample modes to obtain 3D data. The percent relative standard deviation (%RSD) values for 10 determinations of 1.0 × 10^?5 mol/L of COD and 1.0 × 10^?4 mol/L of PAR were 6.1% and 8.7%, respectively. The limit of detection (LOD) values (S/N = 3) were 0.9 × 10^?8 mol/L and 1.0 × 10^?6 mol/L for COD and PAR, respectively. The proposed method was successfully applied to the determination of PAR and COD in commercial pharmaceutical formulations. Acceptable recoveries (90–110%) were obtained for the quantification of these drugs in the real samples. Copyright © 2016 John Wiley & Sons, Ltd.     

Electrophoresis–chemiluminescence detection of phenols catalyzed by hemin

Based on the catalytic activity of hemin, an efficient biocatalyst, an indirect capillary electrophoresis–chemiluminescence (CE‐CL) detection method for phenols using a hemin–luminol–hydrogen peroxide system was developed. Through a series of static injection experiments, hemin was found to perform best in a neutral solution rather than an acidic or alkaline medium. Although halide ions such as Br^? and F^? could further enhance the CL signal catalyzed by hemin, it is difficult to apply these conditions to this CE‐CL detection system because of the self‐polymerization of hemin, as it hinders the CE process. The addition of concentrated ammonium hydroxide to an aqueous/dimethyl sulfoxide solution of hemin–luminol afforded a stable CE‐CL baseline. The indirect CE‐CL detection of five phenols using this method gave the following limits of detections: 4.8 × 10^?8 mol/L (o‐sec‐butylphenol), 4.9 × 10^?8 mol/L (o‐cresol), 5.4 × 10^?8 mol/L (m‐cresol), 5.3 × 10^?8 mol/L (2,4‐dichlorophenol) and 7.1 × 10^?8 mol/L (phenol). Copyright © 2013 John Wiley & Sons, Ltd.     

The determination of glutamine with flow‐injection chemiluminescence detection and mechanism study

The main purpose of this study was to develop an inexpensive, simple, rapid and sensitive chemiluminescence (CL) method for the determination of glutamine (Gln) using a flow‐injection (FI) system. Gln was found to strongly inhibit the CL signal of the luminol–H₂O₂–CuSO₄ system in Na₂B₄O₇ solution. A new FI‐CL method was developed for the determination of Gln. Parameters affecting the reproducibility and CL detection were optimized systematically. Under the optimized conditions, the corresponding linear regression equation was established over the range of 5.0 × 10^?7 to 2.5 × 10^?6 mol/L with the detection limit of 1.8 × 10^?8 mol/L. The relative standard deviation was found to be 1.8% for 11 replicate determinations of 1.5 × 10^?6 mol/L Gln. The proposed method has been satisfactorily applied for the determination of Gln in real samples (Marzulene‐s granules) with recoveries in the range of 98.7–108.6%. The minimum sampling rate was about 100 samples/h. The possible mechanism of this inhibitory CL was studied by fluorescence spectrophotometer and UV–vis spectrophotometer. Copyright © 2009 John Wiley & Sons, Ltd.     

Scavenging of reactive oxygen species by N‐substituted indole‐2 and 3‐carboxamides

Indole‐2 and 3‐carboxamides (IDs) are proposed to be selective cyclooxygenase inhibitors. Since cyclooxygenase‐1 may be involved in reactive oxygen species (ROS) production, we hypothesize that these indole derivatives have antioxidative properties. We have employed chemiluminescence (CL) and electron spin resonance (ESR) spin trapping to examine this hypothesis. We report here the results of a study of reactivity of 10 selected indole derivatives towards ROS. The following generators of ROS were applied: potassium superoxide (KO₂) as a source of superoxide radicals (O₂^·?), the Fenton reaction (Co‐EDTA/H₂O₂) for hydroxyl radicals (HO^·), and a mixture of alkaline aqueous H₂O₂ and acetonitrile for singlet oxygen (¹O₂). Hydroxyl radicals were detected as 5,5‐dimethyl‐1‐pyrroline‐N‐oxide (DMPO) spin adduct, whereas 2,2,6,6‐tetramethyl‐piperidine (TEMP) was used as a detector of ¹O₂. Using the Fenton reaction, 0.5 mmol/L IDs were found to inhibit DMPO‐?H radical formation in the range 7–37%. Furthermore the tested compounds containing the thiazolyl group also inhibited the ¹O₂‐dependent TEMPO radical, generated in the acetonitrile + H₂O₂ system. About 20% inhibition was obtained in the presence of 0.5 mmol/L IDs. 1 mmol/L IDs caused an approximately 13–70% decrease in the CL sum from the O₂^·? generating system (1 mmol/L). The aim of this paper is to evaluate these indole derivatives as antioxidants and their abilities to scavenge ROS. Copyright © 2004 John Wiley & Sons, Ltd.     

Chemiluminescence determination of sulphite using a cyclometalated iridium complex as chemiluminescence reagent

A simple, fast and accurate chemiluminescence (CL) method for the determination of sulphite has been developed, based on its sensitizing effect on the CL reaction between a novel water‐soluble iridium complex, [(dpci)₂Ir(bvbbi)](PF₆) (dpci = 3,4‐diphenylcinnoline; bvbbi = N,N′‐bivinylester‐¹H,^1′H‐[2,2′] bibenzimidazole) and cerium(IV). Under the optimal experimental conditions, the increased CL response was linear, with the concentration of sulphite over the range 5.0 × 10^–7–5.0 × 10^–4 mol/L. The detection limit of the method was 1.6 × 10^–7 mol/L, with a relative standard deviation (RSD) of 2.7% for nine repetitive determination of 1.0 × 10^–4 mol/L sulphite. The method was successfully applied to the quantitative analysis of sulphite in sugar samples. The possible reaction mechanism of sulphite on the [(dpci)₂Ir(bvbbi)](PF₆)–cerium(IV) system is also briefly discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Scavenging of hydroxyl radical by catecholamines

The direct effects of the four catecholamines (CATs), adrenaline (A), noradrenaline (NA), dopamine (D) and isoproterenol (I), on free radicals were investigated using the free radical 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH^?) and hydroxyl radial (HO^?). The CATs examined were found to inhibit the ESR signal intensity of DPPH^? in a dose‐dependent manner over the range 0.1–2.5 mmol/L in the following order: NA > A > I > D, with IC₅₀ = 0.30 ± 0.03 for noradrenaline and IC₅₀ = 0.86 ± 0.02 for dopamine. Hydroxyl radicals were produced using a Fenton reaction in the presence of the spin trap 5,5‐dimethyl‐1‐pyrroline N‐oxide (DMPO), and ESR technique was applied to detect the CATs reactivity toward the radicals. The reaction rates constant (k_r) of CATs with HO^? were found to be in the order of 10⁹ L/mol/s, and the k_r value for noradrenaline was the highest (k_r = 8.4 × 10⁹ L/mol/s). The CATs examined exhibited also a strong decrease in the light emission (62–73% at 1 mmol/L concentration and 79–89% at 2 mmol/L concentration) from a Fenton‐like reaction. These reactions may be relevant to the biological action of these important polyphenolic compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence determination of diazepam by oxidation with N‐bromosuccinimide

A rapid and sensitive flow‐injection chemiluminescence (FI–CL) method is described for the determination of diazepam based on its reaction with N‐bromosuccinimide (NBS) in alkaline medium in the presence of dichlorofluorescein (DCF) as an effective energy‐transfer agent. Under optimum conditions, the proposed method allowed the measurement of diazepam over the range of 2.0 × 10^?6 to 2.0 × 10^?4 mol/L with a detection limit of 5.0 × 10^?7 mol/L. The relative standard deviation for 11 parallel measurements of 2.0 × 10^?5 mol/L diazepam was 2.1%. The method was applied satisfactorily for the determination of diazepam in pharmaceutical preparations, and the results agree well with those obtained by spectrophotometry. The use of the proposed system for the determination of diazepam in urine and plasma samples was also tested. The possible mechanism of the chemiluminescence reaction is discussed briefly. Copyright © 2012 John Wiley & Sons, Ltd.     

Sensitive determination of 2‐methoxyestradiol in pharmaceutical preparations and serum samples using flow injection chemiluminescence

A rapid and sensitive flow injection chemiluminescence (FI–CL) method is described for the determination of 2‐methoxyestradiol (2ME) based on enhancement of the CL intensity from a potassium ferricyanide–calcein system in sodium hydroxide medium. The optimum conditions for the CL emission were investigated. Under optimized conditions, a linear calibration graph was obtained over the range 1.0 × 10^‐8 to 1.0 × 10^‐6 mol/L (r = 0.998) 2ME with a detection limit (3σ) of 5.4 × 10^‐9 mol/L. The relative standard deviation (RSD) for 5.0 × 10^‐7 mol/L 2ME was 1.7%. As a preliminary application, the proposed method was successfully applied to the determination of 2ME in injection solutions and serum samples. The possible CL mechanism was also proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence method for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride

A sensitive and simple flow‐injection chemiluminescence (FI‐CL) method, which was based on the CL intensity generated from the redoxreaction of potassium permanganate (KMnO₄)–formaldehyde in vitriol (H₂SO₄) medium, has been developed, validated and applied for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride. Besides oxidants and sensitizers, the effect of the concentration of H₂SO₄, KMnO₄ and formaldehyde was investigated. Under the optimum conditions, the linear range was 1.0 × 10^?2–7.0 mg/L for naphazoline hydrochloride and 5.0 × 10^?2–10.0 mg/L for oxymetazoline hydrochloride. During seven repeated inter‐day and intra‐day precision tests of 0.1, 1.0 and 10.0 mg/L samples, the relative standard deviations all corresponded to reference values. The detection limit was 8.69 × 10^?3 mg/L for naphazoline hydrochloride and 3.47 × 10^?2 mg/L for oxymetazoline hydrochloride (signal‐to‐noise ratio ≤3). This method has been successfully implemented for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride in pharmaceuticals. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of dipyridamole using TCPO–H2O2 chemiluminescence in the presence of silver nanoparticles

The method is based on the fact that dipyridamole can enhance the chemiluminescence (CL) emission from the redox reaction of bis (2,4,6‐tricholorophenyl) oxalate (TCPO) with H₂O₂ in the presence of silver nanoparticles (AgNPs). The CL reaction mechanism was discussed. The effect of concentrations of TCPO, H₂O₂, AgNPs and pH value on the CL reaction were investigated. Under the optimum conditions, the linear dynamic range was 1.0–1000 × 10^?9 g/mL and the detection limit (3σ) was 9 × 10^?10 g/mL. The relative standard deviation (RSD) was 4.8% for 1.0 × 10^?9 g/mL dipyridamole (n = 7). The proposed method has been successfully applied to the determination of dipyridamole tablets and the recovery was 99–103%. Copyright © 2011 John Wiley & Sons, Ltd.     

Post‐chemiluminescence determination of chloramphenicol based on luminol–potassium periodate system

A post‐chemiluminescence (PCL) phenomenon was observed when chloramphenicol was injected into a mixture of luminol and potassium periodate after the chemiluminescence (CL) reaction of luminol–potassium periodate had finished. The possible reaction mechanism was proposed based on studies of the CL kinetic characteristics, the CL spectra, the fluorescence spectra and the UV‐vis absorption spectra of the related substances. Based on the PCL reaction, a rapid and sensitive method for the determination of chloramphenicol was established. The linear response range was 6.0 × 10^?7–1.0 × 10^?5 mol/L, with a correlation coefficient of 0.9986. The relative standard deviation (RSD) for 5.0 × 10^?6 mol/L chloramphenicol was 2.3% (n = 11). The detection limit was 1.6 × 10^?7 mol/L. The method has been applied to the determination of chloramphenicol in pharmaceutical samples with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

New luminol chemiluminescence reaction using diperiodatoargentate as oxidate for the determination of amikacin sulfate

A new chemiluminescence (CL) reaction between luminol and diperiodatoargentate {K₂ [Ag (H₂IO₆) (OH) ₂]} was observed in alkaline medium. The CL intensity could be greatly enhanced by amikacin sulfate. Therefore a new CL method for the determination of amikacin sulfate was built by combining with flow injection technology. A possible mechanism of the CL reaction was proposed via the investigation of the CL kinetic characteristics, the CL spectrum and the UV absorption spectra of some related substance. The concentration range of linear response was 5.1 × 10^?8 to 5.1 × 10^?6 mol L^?1 with a detection limit of 1.9 × 10^?8 mol L^?1 (3σ). The proposed method had good reproducibility with a relative standard deviation of 2.8% (n = 7) for 5.1 × 10^?7 mol L^?1 of amikacin sulfate. It was successfully applied to determine amikacin sulfate in serum. Copyright © 2009 John Wiley & Sons, Ltd.     

Chemiluminescence detection of trace iodide with flow injection analysis of KMnO4‐carbon dots system

Ultra‐weak chemiluminescence (CL) from the reaction of iodide and KMnO₄ was strongly enhanced by carbon nanodots (CNDs) in an acidic medium. The CL intensity was directly proportional to the concentration of iodide in the solution. Therefore, a flow‐injection CL system with high sensitivity, selectivity and reproducibility is proposed for the determination of iodide. The proposed method exhibited advantages over a linear range of 3.0 × 10^?6–1.0 × 10^?4 mol/L and had a detection limit of 3.5 × 10^?7 mol/L. The method was successfully applied to the evaluation of iodide in food samples with recoveries of between 96 and 103%. The relative standard deviations were 2.1 and 4.1% for intra‐ and inter‐assay precision, respectively.     

Chemiluminescence sensor for sulfonylurea herbicide using molecular imprinted microspheres as recognition element

Uniform molecular imprinting microspheres were prepared using precipitation polymerization with thifensulfuron‐methyl (TFM) as template, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross‐linker. TFM could be selectively adsorbed on the molecularly imprinted polymers (MIPs) matrix through the hydrogen bonding interaction and the adsorbed TFM could be sensed by its strikingly enhancing effect on the weak chemiluminescence (CL) reaction between luminol and hydrogen peroxide. On this basis, a novel CL sensor for the determination of TFM using MIPs as recognition elements was established. The logarithm of net CL intensity (ΔI) is linearly proportional to the logarithm of TFM concentration (C) in the range from 1.0 × 10^?9 to 5.0 × 10^?5 mol L^?1 with a detection limit of 8.3 × 10^?10 mol L^?1 (3σ). The results demonstrated that the MIP–CL sensor was reversible and reusable and that it could strikingly improve the selectivity and sensitivity of CL analysis. Furthermore, it is suggested that the CL enhancement of luminol–H₂O₂ by TFM might be ascribed to the enhancement effect of CO₂, which came from TFM hydrolysis in basic medium. Copyright © 2010 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence determination of haemoglobin in the blood

In this study, a sensitive and simple flow‐injection chemiluminescence (CL) method was developed for the quantitative analysis of haemoglobin. The method is based on the ability of haemoglobin to enhance the CL signal generated by a H₂O₂–K₄Fe(CN)₆–fluorescein alkaline system enhanced by CdTe quantum dots. Under the optimized conditions, haemoglobin can be detected in concentration range 7.35 × 10^–9–2.5 × 10^–6 mol/L, with a detection limit (3σ) of 1.8 × 10^–9 mol/L and a relative standard deviation (RSD; for 5 × 10^–7 mol/L haemoglobin) of 2.06% (n = 11). The present CL method was successfully applied for the determination of haemoglobin in three kinds of blood samples taken from an infant, an adult man, an adult woman and two reference samples. Compared with previous reports, the CL method described in this work is simple and rapid, with high sensitivity. Copyright © 2012 John Wiley & Sons, Ltd.     

Development of chemiluminescence method for determination of 10‐hydroxycamptothecin based on luminol–[Ag(HIO6)2]5− reaction in alkaline solution

A novel chemiluminescence (CL) method was developed for the determination of 10‐hydroxycamptothecin(HCPT) based on the CL reaction between [Ag(HIO₆)₂]^5? and luminol in alkaline solution. CL emission of Ag(III) complex–luminol in alkaline medium was very different from that in acidic medium. A possible mechanism of enhanced CL emission was suggested. The enhanced effect of HCPT on CL emission of the [Ag(HIO₆)₂]^5?–luminol system was found. The enhanced degree of CL emission was proportional to HCPT concentration. The effect of the reaction conditions on CL emission was examined. Under optimal conditions, the limit of detection was 6.5 × 10^?9 g mL^?1. The proposed method was applied for the determination of HCPT in real samples with the recoveries of 93.2–109% with the RSD of 1.7–3.3%. Copyright © 2010 John Wiley & Sons, Ltd.     

Determination of tannic acid in industrial wastewater based on chemiluminescence system of KIO4–H2O2–Tween40

The oxidation reaction of H₂O₂ with KIO₄ can produce chemiluminescence (CL) in the presence of the surfactant Tween40 and the CL intensity of the CL system KIO₄–H₂O₂–Tween40 can be strikingly enhanced after injection of tannic acid. On this basis, a flow injection method with CL detection was established for the determination of tannic acid. The method is simple, rapid and effective to determine tannic acid in the range of 7.0 × 10^?9 to 1.0 × 10^?5 mol/L with a determination limit of 2.3 × 10^?9 mol/L. The relative standard deviation is 2.6% for the determination of 5.0 × 10^?6 mol/L tannic acid (n = 11). The method has been applied to determine the content of tannic acid in industrial wastewater with satisfactory results. It is believed that the CL reaction formed singlet oxygen ¹O₂* and the emission was from an excited oxygen molecular pair O₂(¹Δ_g)O₂(¹∑^?_g) in the KIO₄–H₂O₂–Tween40 reaction. Tween40 played an important role in enhancing stabilization of the excited oxygen molecular pair O₂(¹Δ_g)O₂(¹∑^?_g) and in increasing CL intensity. Copyright © 2010 John Wiley & Sons, Ltd.