Multiple interval mapping for quantitative trait loci.

A new statistical method for mapping quantitative trait loci (QTL), called multiple interval mapping (MIM), is presented. It uses multiple marker intervals simultaneously to fit multiple putative QTL directly in the model for mapping QTL. The MIM model is based on Cockerham's model for interpreting genetic parameters and the method of maximum likelihood for estimating genetic parameters. With the MIM approach, the precision and power of QTL mapping could be improved. Also, epistasis between QTL, genotypic values of individuals, and heritabilities of quantitative traits can be readily estimated and analyzed. Using the MIM model, a stepwise selection procedure with likelihood ratio test statistic as a criterion is proposed to identify QTL. This MIM method was applied to a mapping data set of radiata pine on three traits: brown cone number, tree diameter, and branch quality scores. Based on the MIM result, seven, six, and five QTL were detected for the three traits, respectively. The detected QTL individually contributed from approximately 1 to 27% of the total genetic variation. Significant epistasis between four pairs of QTL in two traits was detected, and the four pairs of QTL contributed approximately 10.38 and 14.14% of the total genetic variation. The asymptotic variances of QTL positions and effects were also provided to construct the confidence intervals. The estimated heritabilities were 0.5606, 0.5226, and 0. 3630 for the three traits, respectively. With the estimated QTL effects and positions, the best strategy of marker-assisted selection for trait improvement for a specific purpose and requirement can be explored. The MIM FORTRAN program is available on the worldwide web (http://www.stat.sinica.edu.tw/chkao/).     

Multiple-interval mapping for quantitative trait loci controlling endosperm traits

Endosperm traits are trisomic inheritant and are of great economic importance because they are usually directly related to grain quality. Mapping for quantitative trait loci (QTL) underlying endosperm traits can provide an efficient way to genetically improve grain quality. As the traditional QTL mapping methods (diploid methods) are usually designed for traits under diploid control, they are not the ideal approaches to map endosperm traits because they ignore the triploid nature of endosperm. In this article, a statistical method considering the triploid nature of endosperm (triploid method) is developed on the basis of multiple-interval mapping (MIM) to map for the underlying QTL. The proposed triploid MIM method is derived to broadly use the marker information either from only the maternal plants or from both the maternal plants and their embryos in the backcross and F2 populations for mapping endosperm traits. Due to the use of multiple intervals simultaneously to take multiple QTL into account, the triploid MIM method can provide better detection power and estimation precision, and as shown in this article it is capable of analyzing and searching for epistatic QTL directly as compared to the traditional diploid methods and current triploid methods using only one (or two) interval(s). Several important issues in endosperm trait mapping, such as the relation and differences between the diploid and triploid methods, variance components of genetic variation, and the problems if effects are present and ignored, are also addressed. Simulations are performed to further explore these issues, to investigate the relative efficiency of different experimental designs, and to evaluate the performance of the proposed and current methods in mapping endosperm traits. The MIM-based triploid method can provide a powerful tool to estimate the genetic architecture of endosperm traits and to assist the marker-assisted selection for the improvement of grain quality in crop science. The triploid MIM FORTRAN program for mapping endosperm traits is available on the worldwide web (http://www.stat.sinica.edu.tw/chkao/).     

Mapping of epistatic quantitative trait loci in four-way crosses

Four-way crosses (4WC) involving four different inbred lines often appear in plant and animal commercial breeding programs. Direct mapping of quantitative trait loci (QTL) in these commercial populations is both economical and practical. However, the existing statistical methods for mapping QTL in a 4WC population are built on the single-QTL genetic model. This simple genetic model fails to take into account QTL interactions, which play an important role in the genetic architecture of complex traits. In this paper, therefore, we attempted to develop a statistical method to detect epistatic QTL in 4WC population. Conditional probabilities of QTL genotypes, computed by the multi-point single locus method, were used to sample the genotypes of all putative QTL in the entire genome. The sampled genotypes were used to construct the design matrix for QTL effects. All QTL effects, including main and epistatic effects, were simultaneously estimated by the penalized maximum likelihood method. The proposed method was confirmed by a series of Monte Carlo simulation studies and real data analysis of cotton. The new method will provide novel tools for the genetic dissection of complex traits, construction of QTL networks, and analysis of heterosis.     

Bayesian shrinkage analysis of quantitative trait Loci for dynamic traits

Many quantitative traits are measured repeatedly during the life of an organism. Such traits are called dynamic traits. The pattern of the changes of a dynamic trait is called the growth trajectory. Studying the growth trajectory may enhance our understanding of the genetic architecture of the growth trajectory. Recently, we developed an interval-mapping procedure to map QTL for dynamic traits under the maximum-likelihood framework. We fit the growth trajectory by Legendre polynomials. The method intended to map one QTL at a time and the entire QTL analysis involved scanning the entire genome by fitting multiple single-QTL models. In this study, we propose a Bayesian shrinkage analysis for estimating and mapping multiple QTL in a single model. The method is a combination between the shrinkage mapping for individual quantitative traits and the Legendre polynomial analysis for dynamic traits. The multiple-QTL model is implemented in two ways: (1) a fixed-interval approach where a QTL is placed in each marker interval and (2) a moving-interval approach where the position of a QTL can be searched in a range that covers many marker intervals. Simulation study shows that the Bayesian shrinkage method generates much better signals for QTL than the interval-mapping approach. We propose several alternative methods to present the results of the Bayesian shrinkage analysis. In particular, we found that the Wald test-statistic profile can serve as a mechanism to test the significance of a putative QTL.     

Multiple Trait Analysis of Genetic Mapping for Quantitative Trait Loci

We present in this paper models and statistical methods for performing multiple trait analysis on mapping quantitative trait loci (QTL) based on the composite interval mapping method. By taking into account the correlated structure of multiple traits, this joint analysis has several advantages, compared with separate analyses, for mapping QTL, including the expected improvement on the statistical power of the test for QTL and on the precision of parameter estimation. Also this joint analysis provides formal procedures to test a number of biologically interesting hypotheses concerning the nature of genetic correlations between different traits. Among the testing procedures considered are those for joint mapping, pleiotropy, QTL by environment interaction, and pleiotropy vs. close linkage. The test of pleiotropy (one pleiotropic QTL at a genome position) vs. close linkage (multiple nearby nonpleiotropic QTL) can have important implications for our understanding of the nature of genetic correlations between different traits in certain regions of a genome and also for practical applications in animal and plant breeding because one of the major goals in breeding is to break unfavorable linkage. Results of extensive simulation studies are presented to illustrate various properties of the analyses.     

Multivariate whole genome average interval mapping: QTL analysis for multiple traits and/or environments

A major aim in some plant-based studies is the determination of quantitative trait loci (QTL) for multiple traits or across multiple environments. Understanding these QTL by trait or QTL by environment interactions can be of great value to the plant breeder. A whole genome approach for the analysis of QTL is presented for such multivariate applications. The approach is an extension of whole genome average interval mapping in which all intervals on a linkage map are included in the analysis simultaneously. A random effects working model is proposed for the multivariate (trait or environment) QTL effects for each interval, with a variance-covariance matrix linking the variates in a particular interval. The significance of the variance-covariance matrix for the QTL effects is tested and if significant, an outlier detection technique is used to select a putative QTL. This QTL by variate interaction is transferred to the fixed effects. The process is repeated until the variance-covariance matrix for QTL random effects is not significant; at this point all putative QTL have been selected. Unlinked markers can also be included in the analysis. A simulation study was conducted to examine the performance of the approach and demonstrated the multivariate approach results in increased power for detecting QTL in comparison to univariate methods. The approach is illustrated for data arising from experiments involving two doubled haploid populations. The first involves analysis of two wheat traits, α-amylase activity and height, while the second is concerned with a multi-environment trial for extensibility of flour dough. The method provides an approach for multi-trait and multi-environment QTL analysis in the presence of non-genetic sources of variation.     

Quantitative trait loci for floral morphology in Arabidopsis thaliana

A central question in biology is how genes control the expression of quantitative variation. We used statistical methods to estimate genetic variation in eight Arabidopsis thaliana floral characters (fresh flower mass, petal length, petal width, sepal length, sepal width, long stamen length, short stamen length, and pistil length) in a cosmopolitan sample of 15 ecotypes. In addition, we used genome-wide quantitative trait locus (QTL) mapping to evaluate the genetic basis of variation in these same traits in the Landsberg erecta x Columbia recombinant inbred line population. There was significant genetic variation for all traits in both the sample of naturally occurring ecotypes and in the Ler x Col recombinant inbred line population. In addition, broad-sense genetic correlations among the traits were positive and high. A composite interval mapping (CIM) analysis detected 18 significant QTL affecting at least one floral character. Eleven QTL were associated with several floral traits, supporting either pleiotropy or tight linkage as major determinants of flower morphological integration. We propose several candidate genes that may underlie these QTL on the basis of positional information and functional arguments. Genome-wide QTL mapping is a promising tool for the discovery of candidate genes controlling morphological development, the detection of novel phenotypic effects for known genes, and in generating a more complete understanding of the genetic basis of floral development.     

Mapping quantitative trait loci underlying triploid endosperm traits

Endosperm, which is derived from two polar nuclei fusing with one sperm, is a triploid tissue in cereals. Endosperm tissue determines the grain quality of cereals. Improving grain quality is one of the important breeding objectives in cereals. However, current statistical methods for mapping quantitative trait loci (QTL) under diploid genetic control have not been effective for dealing with endosperm traits because of the complexity of their triploid inheritance. In this paper, we derive for the first time the conditional probabilities of F(3) endosperm QTL genotypes given different flanking marker genotypes in F(2) plants. Using these probabilities, we develop a multiple linear regression method implemented via the iteratively reweighted least-squares (IRWLS) algorithm and a maximum likelihood method (ML) implemented via the expectation-maximization (EM) algorithm to map QTL underlying endosperm traits. We use the mean value of endosperm traits of F(3) seeds as the dependent variable and the expectations of genotypic indicators for additive and dominance effect of a putative QTL flanked by a pair of markers as independent variables for IRWLS mapping. However, if an endosperm trait is measured quantitatively using a single endosperm sample, the ML mapping method can be used to separate the two dominance effects. Efficiency of the methods is verified through extensive Monte Carlo simulation studies. Results of simulation show that the proposed methods provide accurate estimates of both the QTL effects and locations with very high statistical power. With these methods, we are now ready to map endosperm traits, as we can for regular quantitative trait under diploid control.     

Generalized linear mixed models for mapping multiple quantitative trait loci

Many biological traits are discretely distributed in phenotype but continuously distributed in genetics because they are controlled by multiple genes and environmental variants. Due to the quantitative nature of the genetic background, these multiple genes are called quantitative trait loci (QTL). When the QTL effects are treated as random, they can be estimated in a single generalized linear mixed model (GLMM), even if the number of QTL may be larger than the sample size. The GLMM in its original form cannot be applied to QTL mapping for discrete traits if there are missing genotypes. We examined two alternative missing genotype-handling methods: the expectation method and the overdispersion method. Simulation studies show that the two methods are efficient for multiple QTL mapping (MQM) under the GLMM framework. The overdispersion method showed slight advantages over the expectation method in terms of smaller mean-squared errors of the estimated QTL effects. The two methods of GLMM were applied to MQM for the female fertility trait of wheat. Multiple QTL were detected to control the variation of the number of seeded spikelets.     

Regression-based multi-trait QTL mapping using a structural equation model

Quantitative trait loci (QTL) mapping often results in data on a number of traits that have well-established causal relationships. Many multi-trait QTL mapping methods that account for the correlation among multiple traits have been developed to improve the statistical power and the precision of QTL parameter estimation. However, none of these methods are capable of incorporating the causal structure among the traits. Consequently, genetic functions of the QTL may not be fully understood. Structural equation modeling (SEM) allows researchers to explicitly characterize the causal structure among the variables and to decompose effects into direct, indirect, and total effects. In this paper, we developed a multi-trait SEM method of QTL mapping that takes into account the causal relationships among traits related to grain yield. Performance of the proposed method is evaluated by simulation study and applied to data from a wheat experiment. Compared with single trait analysis and the multi-trait least-squares analysis, our multi-trait SEM improves statistical power of QTL detection and provides important insight into how QTLs regulate traits by investigating the direct, indirect, and total QTL effects. The approach also helps build biological models that more realistically reflect the complex relationships among QTL and traits and is more precise and efficient in QTL mapping than single trait analysis.     

Advances in Bayesian multiple quantitative trait loci mapping in experimental crosses

Many complex human diseases and traits of biological and/or economic importance are determined by interacting networks of multiple quantitative trait loci (QTL) and environmental factors. Mapping QTL is critical for understanding the genetic basis of complex traits, and for ultimate identification of genes responsible. A variety of sophisticated statistical methods for QTL mapping have been developed. Among these developments, the evolution of Bayesian approaches for multiple QTL mapping over the past decade has been remarkable. Bayesian methods can jointly infer the number of QTL, their genomic positions and their genetic effects. Here, we review recently developed and still developing Bayesian methods and associated computer software for mapping multiple QTL in experimental crosses. We compare and contrast these methods to clearly describe the relationships among different Bayesian methods. We conclude this review by highlighting some areas of future research.     

Complexities in the genetic dissection of quantitative trait loci

The analysis of complex traits, including those involved in many common diseases, has encountered significant difficulties, and, despite major efforts during the past decade, has had little success. Current advances in genomics, however, promise to change this. Recently, Steinmetz et al. used a new technique to produce the first complete quantitative trait locus (QTL) analysis of a complex trait from phenotype to gene to be published entirely in a single report. This marks a significant advance over previous QTL analyses, which took several years. The work exemplifies some of the complexities of QTL mapping and demonstrates a novel method to resolve the underlying genetic architecture of QTLs in yeast. Here we discuss this work in the general context of genetic dissection of complex traits and QTLs.     

A semiparametric approach for composite functional mapping of dynamic quantitative traits

Functional mapping has emerged as a powerful tool for mapping quantitative trait loci (QTL) that control developmental patterns of complex dynamic traits. Original functional mapping has been constructed within the context of simple interval mapping, without consideration of separate multiple linked QTL for a dynamic trait. In this article, we present a statistical framework for mapping QTL that affect dynamic traits by capitalizing on the strengths of functional mapping and composite interval mapping. Within this so-called composite functional-mapping framework, functional mapping models the time-dependent genetic effects of a QTL tested within a marker interval using a biologically meaningful parametric function, whereas composite interval mapping models the time-dependent genetic effects of the markers outside the test interval to control the genome background using a flexible nonparametric approach based on Legendre polynomials. Such a semiparametric framework was formulated by a maximum-likelihood model and implemented with the EM algorithm, allowing for the estimation and the test of the mathematical parameters that define the QTL effects and the regression coefficients of the Legendre polynomials that describe the marker effects. Simulation studies were performed to investigate the statistical behavior of composite functional mapping and compare its advantage in separating multiple linked QTL as compared to functional mapping. We used the new mapping approach to analyze a genetic mapping example in rice, leading to the identification of multiple QTL, some of which are linked on the same chromosome, that control the developmental trajectory of leaf age.     

Mapping of quantitative trait loci controlling adaptive traits in coastal Douglas fir. III. Quantitative trait loci-by-environment interactions

Quantitative trait loci (QTL) were mapped in the woody perennial Douglas fir (Pseudotsuga menziesii var. menziesii [Mirb.] Franco) for complex traits controlling the timing of growth initiation and growth cessation. QTL were estimated under controlled environmental conditions to identify QTL interactions with photoperiod, moisture stress, winter chilling, and spring temperatures. A three-generation mapping population of 460 cloned progeny was used for genetic mapping and phenotypic evaluations. An all-marker interval mapping method was used for scanning the genome for the presence of QTL and single-factor ANOVA was used for estimating QTL-by-environment interactions. A modest number of QTL were detected per trait, with individual QTL explaining up to 9.5% of the phenotypic variation. Two QTL-by-treatment interactions were found for growth initiation, whereas several QTL-by-treatment interactions were detected among growth cessation traits. This is the first report of QTL interactions with specific environmental signals in forest trees and will assist in the identification of candidate genes controlling these important adaptive traits in perennial plants.     

Quantitative trait loci affecting survival and fertility-related traits in Caenorhabditis elegans show genotype-environment interactions, pleiotropy and epistasis.

We have identified, using composite interval mapping, quantitative trait loci (QTL) affecting a variety of life history traits (LHTs) in the nematode Caenorhabditis elegans. Using recombinant inbred strains assayed on the surface of agar plates, we found QTL for survival, early fertility, age of onset of sexual maturity, and population growth rate. There was no overall correlation between survival on solid media and previous measures of survival in liquid media. Of the four survival QTL found in these two environments, two have genotype-environment interactions (GEIs). Epistatic interactions between markers were detected for four traits. A multiple regression approach was used to determine which single markers and epistatic interactions best explained the phenotypic variance for each trait. The amount of phenotypic variance accounted for by genetic effects ranged from 13% (for internal hatching) to 46% (for population growth). Epistatic effects accounted for 9-11% of the phenotypic variance for three traits. Two regions containing QTL that affected more than one fertility-related trait were found. This study serves as an example of the power of QTL mapping for dissecting the genetic architecture of a suite of LHTs and indicates the potential importance of environment and GEIs in the evolution of this architecture.     

Bayesian mapping of quantitative trait loci for multiple complex traits with the use of variance components

Complex traits important for humans are often correlated phenotypically and genetically. Joint mapping of quantitative-trait loci (QTLs) for multiple correlated traits plays an important role in unraveling the genetic architecture of complex traits. Compared with single-trait analysis, joint mapping addresses more questions and has advantages for power of QTL detection and precision of parameter estimation. Some statistical methods have been developed to map QTLs underlying multiple traits, most of which are based on maximum-likelihood methods. We develop here a multivariate version of the Bayes methodology for joint mapping of QTLs, using the Markov chain-Monte Carlo (MCMC) algorithm. We adopt a variance-components method to model complex traits in outbred populations (e.g., humans). The method is robust, can deal with an arbitrary number of alleles with arbitrary patterns of gene actions (such as additive and dominant), and allows for multiple phenotype data of various types in the joint analysis (e.g., multiple continuous traits and mixtures of continuous traits and discrete traits). Under a Bayesian framework, parameters--including the number of QTLs--are estimated on the basis of their marginal posterior samples, which are generated through two samplers, the Gibbs sampler and the reversible-jump MCMC. In addition, we calculate the Bayes factor related to each identified QTL, to test coincident linkage versus pleiotropy. The performance of our method is evaluated in simulations with full-sib families. The results show that our proposed Bayesian joint-mapping method performs well for mapping multiple QTLs in situations of either bivariate continuous traits or mixed data types. Compared with the analysis for each trait separately, Bayesian joint mapping improves statistical power, provides stronger evidence of QTL detection, and increases precision in estimation of parameter and QTL position. We also applied the proposed method to a set of real data and detected a coincident linkage responsible for determining bone mineral density and areal bone size of wrist in humans.     

Mapping quantitative trait loci for longitudinal traits in line crosses

Quantitative traits whose phenotypic values change over time are called longitudinal traits. Genetic analyses of longitudinal traits can be conducted using any of the following approaches: (1) treating the phenotypic values at different time points as repeated measurements of the same trait and analyzing the trait under the repeated measurements framework, (2) treating the phenotypes measured from different time points as different traits and analyzing the traits jointly on the basis of the theory of multivariate analysis, and (3) fitting a growth curve to the phenotypic values across time points and analyzing the fitted parameters of the growth trajectory under the theory of multivariate analysis. The third approach has been used in QTL mapping for longitudinal traits by fitting the data to a logistic growth trajectory. This approach applies only to the particular S-shaped growth process. In practice, a longitudinal trait may show a trajectory of any shape. We demonstrate that one can describe a longitudinal trait with orthogonal polynomials, which are sufficiently general for fitting any shaped curve. We develop a mixed-model methodology for QTL mapping of longitudinal traits and a maximum-likelihood method for parameter estimation and statistical tests. The expectation-maximization (EM) algorithm is applied to search for the maximum-likelihood estimates of parameters. The method is verified with simulated data and demonstrated with experimental data from a pseudobackcross family of Populus (poplar) trees.     

Bayesian multiple quantitative trait loci mapping for complex traits using markers of the entire genome

A Bayesian methodology has been developed for multiple quantitative trait loci (QTL) mapping of complex binary traits that follow liability threshold models. Unlike most QTL mapping methods where only one or a few markers are used at a time, the proposed method utilizes all markers across the genome simultaneously. The outperformance of our Bayesian method over the traditional single-marker analysis and interval mapping has been illustrated via simulations and real data analysis to identify candidate loci associated with colorectal cancer.     

A random model approach to mapping quantitative trait loci for complex binary traits in outbred populations.

Mapping quantitative trait loci (QTL) for complex binary traits is more challenging than for normally distributed traits due to the nonlinear relationship between the observed phenotype and unobservable genetic effects, especially when the mapping population contains multiple outbred families. Because the number of alleles of a QTL depends on the number of founders in an outbred population, it is more appropriate to treat the effect of each allele as a random variable so that a single variance rather than individual allelic effects is estimated and tested. Such a method is called the random model approach. In this study, we develop the random model approach of QTL mapping for binary traits in outbred populations. An EM-algorithm with a Fisher-scoring algorithm embedded in each E-step is adopted here to estimate the genetic variances. A simple Monte Carlo integration technique is used here to calculate the likelihood-ratio test statistic. For the first time we show that QTL of complex binary traits in an outbred population can be scanned along a chromosome for their positions, estimated for their explained variances, and tested for their statistical significance. Application of the method is illustrated using a set of simulated data.     

Strategies for genetic mapping of categorical traits

The search for efficient and powerful statistical methods and optimal mapping strategies for categorical traits under various experimental designs continues to be one of the main tasks in genetic mapping studies. Methodologies for genetic mapping of categorical traits can generally be classified into two groups, linear and non-linear models. We develop a method based on a threshold model, termed mixture threshold model to handle ordinal (or binary) data from multiple families. Monte Carlo simulations are done to compare its statistical efficiencies and properties of the proposed non-linear model with a linear model for genetic mapping of categorical traits using multiple families. The mixture threshold model has notably higher statistical power than linear models. There may be an optimal sampling strategy (family size vs number of families) in which genetic mapping reaches its maximal power and minimal estimation errors. A single large-sibship family does not necessarily produce the maximal power for detection of quantitative trait loci (QTL) due to genetic sampling of QTL alleles. The QTL allelic model has a marked impact on efficiency of genetic mapping of categorical traits in terms of statistical power and QTL parameter estimation. Compared with a fixed number of QTL alleles (two or four), the model with an infinite number of QTL alleles and normally distributed allelic effects results in loss of statistical power. The results imply that inbred designs (e.g. F₂ or four-way crosses) with a few QTL alleles segregating or reducing number of QTL alleles (e.g. by selection) in outbred populations are desirable in genetic mapping of categorical traits using data from multiple families. This revised version was published online in July 2006 with corrections to the Cover Date.