Meloxicam Taste-Masked Oral Disintegrating Tablet with Dissolution Enhanced by Ion Exchange Resins and Cyclodextrin

The purpose of this study was to develop taste-masked oral disintegrating tablets (ODTs) using the combination of ion exchange resin and cyclodextrin, to mask the bitter taste and enhance drug dissolution. Meloxicam (MX) was selected as a model drug with poor water solubility and a bitter taste. Formulations containing various forms of MX (free drug, MX-loaded resin or resinate, complexes of MX and 2-hydroxypropyl-β-cyclodextrin (HPβCD) or MX/HPβCD complexes, and a mixture of resinate and MX/HPβCD complexes) were made and tablets were prepared by direct compression. The ODTs were evaluated for weight variation, thickness, diameter, hardness, friability, disintegration time, wetting time, MX content, MX release, degree of bitter taste, and stability. The results showed that thickness, diameter, weight, and friability did not differ significantly for all of these formulations. The tablet hardness was approximately 3 kg/in.², and the friability was less than 1%. Tablets formulated with resinate and the mixture of resinate and MX/HPβCD complexes disintegrated rapidly within 60 s, which is the acceptable limit for ODTs. These results corresponded to the in vivo disintegration and wetting times. However, only tablets containing the mixture of resinate and MX/HPβCD complexes provided complete MX dissolution and successfully masked the bitter taste of MX. In addition, this tablet was stable at least 6 months. The results from this study suggest that the appropriate combination of ion exchange resin and cyclodextrin could be used in ODTs to mask the bitter taste of drug and enhance the dissolution of drugs that are weakly soluble in water.     

Development and Evaluation of Cetirizine HCl Taste-Masked Oral Disintegrating Tablets

The purpose of the current study was to mask the taste of cetirizine HCl and to incorporate the granules produced in oral disintegrating tablets (ODT). The bitter, active substance was coated by fluidized bed coating using Eudragit® RL30-D at levels between 15% and 40% w/w. The ODTs were developed by varying the ratio of superdisintegrants such as sodium croscarmellose, crospovidone grades and low substituted hydroxypropyl cellulose (L-HPC). A direct compression process was used to compress the ODTs under various compaction forces to optimize tablet robustness. The properties of the compressed tablets including porosity, hardness, friability and dissolution profiles were further investigated. The in vitro and in vivo evaluation of the tablet disintegration times showed almost identical rapid disintegration below 10 s at the optimal levels of each superdisintegrant. Finally, the taste and sensory evaluation in human volunteers demonstrated excellence in masking the bitter active and tablet palatability.     

Formulation and In Vivo Evaluation of Orally Disintegrating Tablets of Clozapine/Hydroxypropyl-β-cyclodextrin Inclusion Complexes

The aim of this study was to improve the solubility and oral bioavailability of clozapine (CLZ), a poorly water-soluble drug subjected to substantial first-pass metabolism, employing cyclodextrin complexation technique. The inclusion complexes were prepared by an evaporation method. Phase solubility studies, differential scanning calorimetry, X-ray powder diffraction, and Fourier transform infrared spectroscopy were used to evaluate the complexation of CLZ with hydroxypropyl-β-cyclodextrin (HP-β-CD) and the formation of true inclusion complexes. Characterization and dissolution studies were carried out to evaluate the orally disintegrating tablets (ODTs) containing CLZ/HP-β-CD complexes prepared by direct compression. Finally, the bioavailability studies of the prepared ODTs were performed by oral administration to rabbits. The ODTs showed a higher in vitro dissolution rate and bioavailability compared with the commercial tablets. It is evident from the results herein that the developed ODTs provide a promising drug delivery system in drug development, owing to their excellent performance of a rapid onset of action, improved bioavailability, and good patient compliance.     

Comparative effects of different cellulosic-based directly compressed orodispersable tablets on oral bioavailability of famotidine

Famotidine is a potent H₂-receptor antagonist most commonly used by elderly patients. Orodispersible tablets (ODT) are gaining popularity over conventional tablets due to their convenience and suitability for patients having dysphagia. The purpose of this study is to prepare famotidine ODT using the economic direct-compression method.A 3² full factorial design was used to evaluate the influence of different excipients on the properties and in vitro dissolution of famotidine ODT. Two factors were studied for their qualitative effects, namely, disintegrants and diluents. Disintegrants were studied in three levels viz. Ac-Di-Sol, sodium starch glycolate (Primojel) and low-substituted hydroxypropyl cellulose (L-HPC). Fillers were studied in three levels viz. mannitol, spray dried lactose and Avicel PH 101. The ODTs were prepared by direct compression and were evaluated for hardness, drug content, uniformity of weight, in vitro disintegration time, oral disintegration time, wetting time and in vitro dissolution. Maximum dissolution and minimum oral disintegration time (11.4 s) were observed in F7 prepared using L-HPC and mannitol. Furthermore, in human volunteers it showed significant increase in bioavailability compared to Servipep^® with mean AUC_(0–∞) 117.1 ng/ml and 82.71 ng/ml, respectively, and its relative bioavailability was 141.57%. Hence, ODT (F7) could possibly be used to overcome the drawbacks of conventional famotidine tablets in elderly patients with significant increase in oral bioavailability.     

Co-Processed Excipients for Dispersible Tablets–Part 1: Manufacturability

Co-processed excipients may enhance functionality and reduce drawbacks of traditional excipients for the manufacture of tablets on a commercial scale. The following study aimed to characterise a range of co-processed excipients that may prove suitable for dispersible tablet formulations prepared by direct compression. Co-processed excipients were lubricated and compressed into 10.5-mm convex tablets using a Phoenix compaction simulator. Compression profiles were generated by varying the compression force applied to the formulation and the prepared tablets were characterised for hardness, friability, disintegration and fineness of dispersion. Our data indicates that CombiLac, F-Melt type C and SmartEx QD100 were the top 3 most suitable out of 16 co-processed excipients under the conditions evaluated. They exhibited good flow properties (Carr’s index ? 20), excellent tabletability (tensile strength >?3.0 MPa at 0.85 solid fraction), very low friability (<?1% after 15 min), rapid disintegration times (27–49 s) and produced dispersions of ideal fineness (<?250 μm). Other co-processed excipients (including F-Melt type M, Ludiflash, MicroceLac, Pharmaburst 500 and Avicel HFE-102) may be appropriate for dispersible tablets produced by direct compression providing the identified disintegration and dispersion risks were mitigated prior to commercialisation. This indicates that robust dispersible tablets which disintegrate rapidly could be manufactured from a range of co-processed excipients.     

Tablet formulation studies on nimesulide and meloxicam-cyclodextrin binary systems

The objective of this work was to develop tablet formulations of nimesulide-β-cyclodextrin (NI-β-CD) and meloxicam-γ-cyclodextrin (ME-γ-CD) binary systems. In the case of nimesulide, 3 types of binary systems—physical mixtures, kneaded systems, and coevaporated systems—were studied. In the case of meloxicam, 2 types of binary systems—physical mixtures and kneaded systems—were investigated. Both drug-CD binary systems were prepared at 1∶1 and 1∶2 molar ratio (1∶1M and 1∶2M) and used in formulation studies. The tablet formulations containing drug-CD binary systems prepared by the wet granulation and direct compression methods showed superior dissolution properties when compared with the formulations of the corresponding pure drug formulations. Overall, the dissolution properties of tablet formulations prepared by the direct compression method were superior to those of tablets prepared by the wet granulation method. Selected tablet formulations showed good stability with regard to drug content, disintegration time, hardness, and in vitro dissolution properties over 6 months at 40°C±2°C and 75% relative humidity. Published: May 11, 2007     

Formulation and Optimization of Orodispersible Tablets of Diazepam

Diazepam is one of the most prescribed benzodiazepines. The purpose of the present research was to optimize the formulation of orodispersible tablets of diazepam. Orodispersible tablets of diazepam were prepared using different types of superdisintegrants (Ac-Di-Sol, sodium starch glycolate, and crospovidone (CP)) and different types of subliming agents (camphor and ammonium bicarbonate (AB)) at different concentrations and two methods of tablets preparations (wet granulation and direct compression methods). The formulations were evaluated for flow properties, wetting time, hardness, friability, content uniformity, in vivo disintegration time (DT), release profiles, and buccal absorption tests. All formulations showed satisfactory mechanical strength except formula F5 which contains camphor and formula F9 which is prepared by direct compression method. The results revealed that the tablets containing CP as a superdisintegrant have good dissolution profile with shortest DT. The optimized formula F7 is prepared using 10% CP as a superdisintegrant and 20% AB as a subliming agent by wet granulation method which shows the shortest DT and good dissolution profile with acceptable stability. This study helps in revealing the effect of formulation processing variables on tablet properties. It can be concluded that the orodispersible tablets of diazepam with better biopharmaceutical properties than conventional tablets could be obtained using formula F7.     

Tablet formulation containing meloxicam and β-cyclodextrin: Mechanical characterization and bioavailability evaluation

The purpose of this research was to evaluate β-cyclodextrin (β-CD) as a vehicle, either singly or in blends with lactose (spray-dried or monohydrate), for preparing a meloxicam tablet. Aqueous solubility of meloxicam in presence of β-CD was investigated. The tablets were prepared by direct compression and wet granulation techniques. The powder blends and the granules were evaluated for angle of repose, bulk density, compressibility index, total porosity, and drug content. The tablets were subjected to thickness, diameter, weight variation test, drug content, hardness, friability, disintegration time, and in vitro dissolution studies. The effect of β-CD on the bioavailability of meloxicam was also investigated in human volunteers using a balanced 2-way crossover study. Phase-solubility studies indicated an A_L-type diagram with inclusion complex of 1∶1 molar ratio. The powder blends and granules of all formulations showed satisfactory flow properties, compressibility, and drug content. All tablet formations prepared by direct compression or wet granulation showed acceptable mechanical properties. The dissolution rate of meloxicam was significantly enhanced by inclusion of β-CD in the formulations up to 30%. The mean pharmacokinetic parameters (C_max, K_e, and area under the curve [AUC]_0−∞) were significantly increased in presence of β-CD. These results suggest that β-CD would facilitate the preparation of meloxicam tablets with acceptable mechanical properties using the direct compression technique as there is no important difference between tablets prepared by direct compression and those prepared by wet granulation. Also, β-CD is particularly useful for improving the oral bioavailablity of meloxicam.     

Development of Tablet Formulation of Amorphous Solid Dispersions Prepared by Hot Melt Extrusion Using Quality by Design Approach

The objective of the study was to identify the extragranular component requirements (level and type of excipients) to develop an immediate release tablet of solid dispersions prepared by hot melt extrusion (HME) process using commonly used HME polymers. Solid dispersions of compound X were prepared using polyvinyl pyrrolidone co-vinyl acetate 64 (PVP VA64), Soluplus, and hypromellose acetate succinate (HPMCAS-LF) polymers in 1:2 ratio by HME through 18 mm extruder. A mixture design was employed to study effect of type of polymer, filler (microcrystalline cellulose (MCC), lactose, and dicalcium phosphate anhydrous (DCPA)), and disintegrant (Crospovidone, croscarmellose sodium, and sodium starch glycolate (SSG)) as well as level of extrudates, filler, and disintegrant on tablet properties such as disintegration time (DT), tensile strength (TS), compactibility, and dissolution. Higher extrudate level resulted in longer DT and lower TS so 60–70% was the maximum amount of acceptable extrudate level in tablets. Fast disintegration was achieved with HPMCAS-containing tablets, whereas Soluplus- and PVP VA64-containing tablets had higher TS. Crospovidone and croscarmellose sodium were more suitable disintegrant than SSG to achieve short DT, and MCC was a suitable filler to prepare tablets with acceptable TS for each studied HME polymer. The influence of extragranular components on dissolution from tablets should be carefully evaluated while finalizing tablet composition, as it varies for each HME polymer. The developed statistical models identified suitable level of fillers and disintegrants for each studied HME polymer to achieve tablets with rapid DT (<15 min) and acceptable TS (≥1 MPa at 10–15% tablet porosity), and their predictivity was confirmed by conducting internal and external validation studies.     

Fast-disintegrating sublingual tablets: Effect of epinephrine load on tablet characteristics

The aim of this study was to evaluate the effect of increasing epinephrine load on the characteristics of fast-disintegrating sublingual tablets for the potential emergency treatment of anaphylaxis. Four tablet formulations, A, B, C, and D, containing 0%, 6%, 12%, and 24% of epinephrine bitartrate, respectively, and microcrystalline cellulose:low-substituted hydroxypropyl cellulose (9∶1), were prepared by direct compression, at a range of compression forces. Tablet weight variation, content uniformity, hardness, disintegration time, wetting time, and friability were measured for each formulation at each compression force. All 4 tablet formulations at each compression force were within the United States Pharmacopeia (USP) limits for weight variation and content uniformity. A linear increase in compression force resulted in an exponential increase in hardness for all formulations, a linear increase in disintegration and wetting times of A, and an exponential increase in disintegration and wetting times of B, C, and D. At a mean±SD hardness of ≥2.3±0.2 kg, all tablet formulations passed the USP friability test. At a mean±SD hardness of ≤3.1±0.2 kg, all tablet formulations resulted in disintegration and wetting times of <10 seconds and <30 seconds, respectively. Tablets with drug loads from 0% to 24% epinephrine can be formulated with hardness, disintegration times, and wetting times suitable for sublingual administration.     

Acetobacter oryzifermentans sp. nov., isolated from Korean traditional vinegar and reclassification of the type strains of Acetobacter pasteurianus subsp. ascendens (Henneberg 1898) and Acetobacter pasteurianus subsp. paradoxus (Frateur 1950) as Acetobacter ascendens sp. nov., comb. nov.

Twelve Acetobacter pasteurianus-related strains with publicly available genomes in GenBank shared high 16S rRNA gene sequence similarity (>99.59%), but average nucleotide identity (ANI) and in silico DNA-DNA hybridization (DDH) values and multilocus sequence- and genome-based relatedness analyses suggested that they were divided into four different phylogenetic lineages. Relatedness analyses based on multilocus sequences, 1,194 core genes and whole-cell MALDI-TOF profiles supported that strains LMG 1590^T and LMG 1591 (previously classified as the type strains of A. pasteurianus subsp. ascendens and paradoxus, respectively) and strain SLV-7^T do not belong to A. pasteurianus. Strain SLV-7^T, isolated from Korean traditional vinegar, shared low ANI (<91.0%) and in silico DDH (44.2%) values with all other Acetobacter type strains analyzed in this study, indicating that strain SLV-7^T represents a new Acetobacter species. The phenotypic and chemotaxonomic analyses confirmed these results and therefore a new species named Acetobacter oryzifermentans sp. nov. is proposed with SLV-7^T (= KACC 19301^T = JCM 31096^T) as the type strain. Strains LMG 1590^T and LMG 1591 shared high ANI (99.4%) and in silico DDH (96.0%) values between them, but shared low ANI (<92.3%) and in silico DDH (<49.0%) values with other type strains analyzed in this study, indicating that strains LMG 1590^T and LMG 1591 should be reclassified into a new single species that should be named Acetobacter ascendens sp. nov., comb. nov., with LMD 51.1^T (= LMG 1590^T = NCCB 51001^T) as its type strain.     

Influence of processing-induced phase transformations on the dissolution of theophylline tablets

The object of this investigation was to evaluate the influence of (1) processing-induced decrease in drug crystallinity and (2) phase transformations during dissolution, on the performance of theophylline tablet formulations. Anhydrous theophylline underwent multiple transformations (anhydrate --> hydrate --> anhydrate) during processing. Although the crystallinity of the anhydrate obtained finally was lower than that of the unprocessed drug, it dissolved at a slower rate. This decrease in dissolution rate was attributed to the accelerated anhydrate to hydrate transformation during the dissolution run. Water vapor sorption studies proved to be a good predictor of powder dissolution behavior. While a decrease in crystallinity was brought about either by milling or by granulation, the effect on tablet dissolution was pronounced only in the latter. Tablet formulations prepared from the granules exhibited higher hardness, longer disintegration time, and slower dissolution than those containing the milled drug. The granules underwent plastic deformation during compression resulting in harder tablets, with delayed disintegration. The high hardness coupled with rapid anhydrate --> hydrate transformation during dissolution resulted in the formation of a hydrate layer on the tablet surface, which further delayed tablet disintegration and, consequently, dissolution. Phase transformations during processing and, more importantly, during dissolution influenced the observed dissolution rates. Product performance was a complex function of the physical state of the active and the processing conditions.     

Evidence-Based Nanoscopic and Molecular Framework for Excipient Functionality in Compressed Orally Disintegrating Tablets

The work investigates the adhesive/cohesive molecular and physical interactions together with nanoscopic features of commonly used orally disintegrating tablet (ODT) excipients microcrystalline cellulose (MCC) and D-mannitol. This helps to elucidate the underlying physico-chemical and mechanical mechanisms responsible for powder densification and optimum product functionality. Atomic force microscopy (AFM) contact mode analysis was performed to measure nano-adhesion forces and surface energies between excipient-drug particles (6-10 different particles per each pair). Moreover, surface topography images (100 nm²–10 µm²) and roughness data were acquired from AFM tapping mode. AFM data were related to ODT macro/microscopic properties obtained from SEM, FTIR, XRD, thermal analysis using DSC and TGA, disintegration testing, Heckel and tabletability profiles. The study results showed a good association between the adhesive molecular and physical forces of paired particles and the resultant densification mechanisms responsible for mechanical strength of tablets. MCC micro roughness was 3 times that of D-mannitol which explains the high hardness of MCC ODTs due to mechanical interlocking. Hydrogen bonding between MCC particles could not be established from both AFM and FTIR solid state investigation. On the contrary, D-mannitol produced fragile ODTs due to fragmentation of surface crystallites during compression attained from its weak crystal structure. Furthermore, AFM analysis has shown the presence of extensive micro fibril structures inhabiting nano pores which further supports the use of MCC as a disintegrant. Overall, excipients (and model drugs) showed mechanistic behaviour on the nano/micro scale that could be related to the functionality of materials on the macro scale.     

Effects of plantain and corn starches on the mechanical and disintegration properties of paracetamol tablets

The effects of plantain starch obtained from the unripe fruit of the plantMusa paradisiaca L. (Musaceae) on the mechanical and disintegration properties of paracetamol tablets have been investigated in comparison with the effects of corn starch BP using a 2³ factorial experimental design. The individual and combined effects of nature of starch binder (N), concentration of starch binder (C), and the relative density of tablet (RD) on the tensile strength (TS), brittle fracture index (BFI), and disintegration time (DT) of the tablets were investigated. The ranking of the individual effects on TS was RD>C≫N, on BFI was C≫RD>N and on DT was N>C>RD. The ranking for the interaction effects on TS and DT was N-C≫N-RD>C-RD, while that on BFI was N-C≫C-RD>N-RD. Changing nature of starch from a “low” (plantain starch) to a “high” (corn starch) level, increasing the concentration of starch binding agent from 2.5% to 10.0% wt/wt, and increasing relative density of the tablet from 0.80 to 0.90, led to increase in the values of TS and DT, but a decrease in BFI. Thus, tablets containing plantain starch had lower tensile strength and disintegration time values than those containing corn starch, but showed better ability to reduce the lamination and capping tendency in paracetamol tablet formulation. The interaction between N and C was significantly (P<.001) higher than those between N and RD and between C and RD. There is therefore the need to carefully choose the nature (N) and concentration (C) of starch used as binding agent in tablet formulations to obtain tablets of desired bond strength and disintegration properties. Furthermore, plantain starch could be useful as an alternative binding agent to cornstarch, especially where faster disintegration is required and the problems of lamination and capping are of particular concern. Published: October 22, 2005     

Effects of millimeter-wave radiation on monolayer cell cultures. II. Scanning and transmission electron microscopy

Both thermal and athermal effects of millimeter-wave radiation on BHK-21/C13 cells were sought using scanning and transmission electron microscopy in conjunction with an in vitro technique that allows direct exposure of monolayer cultures to high average power densities. Culture dishes were irradiated by placing them on the open end of an E- or U-band wave guide. This technique exposes different regions of the cell monolayer lying along the longer axis of the wave guide aperture to varying power densities ranging from zero at each edge to twice the average power density at the center. Cell ultrastructure was unaffected by microwave radiation for 1 hour (41.8 or 74.0 GHz, average power densitites = 320 or 450 mW/cm², respectively) with or without cooling by rapid recirculation of the culture medium. Temperature in recirculated cultures was held at 37.2 °C, and that in noncooled cultures never exceeded 42 °C during irradiation at either power density. In contrast, cell morphology was affected by microwave exposure whenever irradiation conditions were altered so that the temperature of the monolayer reached or exceeded 44.5 °C. Ultrastructural alterations included breakage of cell processes, progressive detachment of cells from the substrate, increased clumping of heterochromatin in the nuclei, and the appearance of large empty vesicles in the cytoplasm. Such morphological changes resulted from either application of higher average power densities or irradiation at the power densities described above at a higher ambient temperature (>38.5°C).     

Maltodextrin: A Novel Excipient Used in Sugar-Based Orally Disintegrating Tablets and Phase Transition Process

The recent challenge in orally disintegrating tablets (ODT) manufacturing encompasses the compromise between instantaneous disintegration, sufficient hardness, and standard processing equipment. The current investigation constitutes one attempt to fulfill this challenge. Maltodextrin, in the present work, was utilized as a novel excipient to prepare ODT of meclizine. Tablets were prepared by both direct compression and wet granulation techniques. The effect of maltodextrin concentrations on ODT characteristics—manifested as hardness and disintegration time—was studied. The effect of conditioning (40°C and 75% relative humidity) as a post-compression treatment on ODT characteristics was also assessed. Furthermore, maltodextrin-pronounced hardening effect was investigated using differential scanning calorimetry (DSC) and X-ray analysis. Results revealed that in both techniques, rapid disintegration (30–40 s) would be achieved on the cost of tablet hardness (about 1 kg). Post-compression conditioning of tablets resulted in an increase in hardness (3 kg), while keeping rapid disintegration (30–40 s) according to guidance of the FDA for ODT. However, direct compression-conditioning technique exhibited drawbacks of long conditioning time and appearance of the so-called patch effect. These problems were, yet, absent in wet granulation-conditioning technique. DSC and X-ray analysis suggested involvement of glass-elastic deformation in maltodextrin hardening effect. High-performance liquid chromatography analysis of meclizine ODT suggested no degradation of the drug by the applied conditions of temperature and humidity. Overall results proposed that maltodextrin is a promising saccharide for production of ODT with accepted hardness-disintegration time compromise, utilizing standard processing equipment and phenomena of phase transition.     

Development of Orodispersible Films Containing Benzydamine Hydrochloride Using a Modified Solvent Casting Method

The aim of this study was to develop benzydamine hydrochloride-loaded orodispersible films using the modification of a solvent casting method. An innovative approach was developed when the drying process of a small-scale production was used based on a heated inert base for casting the film. During this process, two types of film-forming maltodextrins for rapid drug delivery were used. They were plasticized with two different polyols (xylitol and sorbitol). Superdisintegrant Kollidon® CL-F was tested as an excipient that can induce faster disintegration of the prepared films. The influence of the formulation parameters (dextrose equivalent of film-forming maltodextrins, a type of plasticizer, and the presence of superdisintegrant) on the disintegration time, mechanical properties, and moisture content of films was statistically evaluated using a multivariate data analysis. Orodispersible films containing maltodextrin with lower dextrose equivalent value showed better mechanical properties (tensile strength ranged from 886.6?±?30.2 to 1484.2?±?226.9 N cm^?2), lower moisture content (0.5?±?0.0 to 1.2?±?0.2%), and shorter disintegration time (17.6?±?2.9 to 27.8?±?2.8 s). Films plasticized with xylitol showed shorter disintegration time (17.6?±?2.9 to 29.2?±?3.8 s) than films containing sorbitol (23.8?±?2.9 to 31.7?±?3.9 s). With the addition of superdisintegrant Kollidon® CL-F, a significant influence on disintegration time was not observed. The modified solvent casting method shows great promise in a small-scale laboratory production of orodispersible films, e.g., in a pharmacy lab.     

Determination of Enantiomeric Impurity of Levamlodipine Besylate Bulk Drug by Capillary Electrophoresis Using Carboxymethyl-β-Cyclodextrin

A rapid capillary electrophoresis method using carboxymethyl-β-cyclodextrin (CM-β-CD) as chiral selector was developed and validated for the enantiomeric purity determination of levamlodipine besylate bulk drug. Several parameters for were optimized for a satisfactory enantioresolution, including pH of background electrolyte, the concentration of chiral selector, buffer concentration, capillary temperature and voltage. The highest resolution (Rs = 9.8) was obtained with 4 mM CM-β-CD dissolved in 40 mM phosphate buffer (pH 3.5), at temperature 25 °C and voltage 30 kV, normal polarity. This method was fully validated for the enantiomeric purity determination of the R-amlodipine at the 0.2 % level. The established method was validated in terms of selectivity, LOD and LOQ (0.001 and 0.003 mg mL^?1), linearity (y = 2.8943x + 0.1386, r ² = 0.9991), precision and accuracy (95–104 %). Finally, the method was further applied to investigate the enantiomeric purity of levamlodipine in bulk samples.     

Formulation Development of Spherical Crystal Agglomerates of Itraconazole for Preparation of Directly Compressible Tablets with Enhanced Bioavailability

The objective of the present work was to formulate tablet dosage form of itraconazole with enhanced bioavailability. Spherical crystal agglomerates (SCA) of itraconazole prepared by quasi emulsification solvent diffusion method using Soluplus and polyethylene glycol 4000 (PEG 4000) showed increased solubility (540 μg/ml) in 0.1 N hydrochloric acid as compared to pure drug (12 μg/ml). A Fourier transform infrared (FTIR) study indicated compatibility of drug with the excipients. The developed SCA were spherical with smooth surface having an average size of 412 μm. The significantly improved micromeritic properties compared to the plain drug suggested its suitability for direct compression. The antifungal activity of itraconazole was retained in the SCA form as evidenced from the results of the disc diffusion method. The optimized SCA formulation could be easily compressed into tablet with desirable characteristics of hardness (5 kg/cm²) and disintegration time (6.3 min). The in vitro dissolution studies showed significant difference in the dissolution profiles of pure drug (21%) and SCA formulation (85%) which was even greater than that of marketed preparation (75%). In vivo pharmacokinetic showed significant enhancement in C_max and AUC_0−t with relative bioavailability of 225%. The SCA formulation seems to be promising for enhancement of oral bioavailability of itraconazole.KEY WORDS: bioavailability, direct compression, itraconazole, spherical crystal agglomeration     

The detection of QTLs in barley associated with endosperm hardness, grain density, grain size and malting quality using rapid phenotyping tools

Using a barley mapping population, ‘Vlamingh’ × ‘Buloke’ (V × B), whole grain analyses were undertaken for physical seed traits and malting quality. Grain density and size were predicted by digital image analysis (DIA), while malt extract and protein content were predicted using near infrared (NIR) analysis. Validation of DIA and NIR algorithms confirmed that data for QTL analysis was highly correlated (R ² > 0.82), with high RPD values (the ratio of the standard error of prediction to the standard deviation, 2.31–9.06). Endosperm hardness was measured on this mapping population using the single kernel characterisation system. Grain density and endosperm hardness were significantly inter-correlated in all three environments (r > 0.22, P < 0.001); however, other grain components were found to interact with the traits. QTL for these traits were also found on different genomic regions, for example, grain density QTLs were found on chromosomes 2H and 6H, whereas endosperm hardness QTLs were found on 1H, 5H, and 7H. In this study, the majority of the genomic regions associated with grain texture were also coincident with QTLs for grain size, yield, flowering date and/or plant development genes. This study highlights the complexity of genomic regions associated with the variation of endosperm hardness and grain density, and their relationships with grain size traits, agronomic-related traits, and plant development loci.