Cytotoxicity of bovine seminal ribonuclease: monomer versus dimer

Bovine seminal ribonuclease (BS-RNase) is a homologue of bovine pancreatic ribonuclease (RNase A). Unlike RNase A, BS-RNase has notable toxicity for human tumor cells. Wild-type BS-RNase is a homodimer linked by two intermolecular disulfide bonds. This quaternary structure endows BS-RNase with resistance to inhibition by the cytosolic ribonuclease inhibitor protein (RI), which binds tightly to RNase A and monomeric BS-RNase. Here, we report on the creation and analysis of monomeric variants of BS-RNase that evade RI but retain full enzymatic activity. The cytotoxic activity of these monomeric variants exceeds that of the wild-type dimer by up to 30-fold, indicating that the dimeric structure of BS-RNase is not required for cytotoxicity. Dimers of these monomeric variants are more cytotoxic than wild-type BS-RNase, suggesting that the cytotoxicity of the wild-type enzyme is limited by RI inhibition following dissociation of the dimer in the reducing environment of the cytosol. Finally, the cytotoxic activity of these dimers is less than that of the constituent monomers, indicating that their quaternary structure is a liability. These data provide new insight into structure-function relationships of BS-RNase. Moreover, BS-RNase monomers described herein are more toxic to human tumor cells than is any known variant or homologue of RNase A including Onconase, an amphibian homologue in phase III clinical trials for the treatment of unresectable malignant mesothelioma.     

Structure-cytotoxicity relationships in bovine seminal ribonuclease: new insights from heat and chemical denaturation studies on variants

Bovine seminal ribonuclease (BS-RNase), a homodimeric protein displaying selective cytotoxicity towards tumor cells, is isolated as a mixture of two isoforms, a dimeric form in which the chains swap their N-termini, and an unswapped dimer. In the cytosolic reducing environment, the dimeric form in which the chains swap their N-termini is converted into a noncovalent dimer (termed NCD), in which the monomers remain intertwined through their N-terminal ends. The quaternary structure renders the reduced protein resistant to the ribonuclease inhibitor, a protein that binds most ribonucleases with very high affinity. On the other hand, upon selective reduction, the unswapped dimer is converted in two monomers, which are readily bound and inactivated by the ribonuclease inhibitor. On the basis of these considerations, it has been proposed that the cytotoxic activity of BS-RNase relies on the 3D structure and stability of its NCD derivative. Here, we report a comparison of the thermodynamic and chemical stability of the NCD form of BS-RNase with that of the monomeric derivative, together with an investigation of the thermal dissociation mechanism revealing the presence of a dimeric intermediate. In addition, we report that the replacement of of Arg80 by Ser significantly decreases the cytotoxic activity of BS-RNase and the stability of the NCD form with respect to the parent protein, but does not affect the ribonucleolytic activity or the dissociation mechanism. The data show the importance of Arg80 for the cytotoxicity of BS-RNase, and also support the hypothesis that the reduced derivative of BS-RNase is responsible for its cytotoxic activity.     

The swapping of terminal arms in ribonucleases: comparison of the solution structure of monomeric bovine seminal and pancreatic ribonucleases

Bovine seminal ribonuclease (BS-RNase), the only dimeric protein among the pancreatic-like ribonucleases, is endowed with special structural features and with biological functions beyond enzymatic activity. In solution, the protein exists as an equilibrium mixture of two forms, with or without exchange (or swapping) of the N-terminal arms. After selective reduction and alkylation of the two intrachain disulfide bridges, the dimeric protein can be transformed into a monomeric derivative that has a ribonuclease activity higher than that of the parent dimeric protein but is devoid of the special biological functions. A detailed investigation of the structural features of this protein in solution, in comparison with those of other monomeric ribonucleases, may help unveil the structural details which induce swapping of the N-terminal arms of BS-RNase. The solution structure of the recombinant monomeric form of BS-RNase, as determined by 3D heteronuclear NMR, shows close similarity with that of bovine pancreatic ribonuclease (RNase A) in all regions characterized by regular elements of secondary structure. However, significant differences are present in the flexible regions, which could account for the different behavior of the two proteins. To characterize in detail these regions, we have measured H/D exchange rate constants, temperature coefficients and heteronuclear NOEs of backbone amides for both RNase A and monomeric BS-RNase. The results indicate a large difference in the backbone flexibility of the hinge peptide segment 16-22 of the two proteins, which could provide the molecular basis to explain the ability of BS-RNase subunits to swap their N-terminal arms.     

Solution structure and dynamics of Crh, the Bacillus subtilis catabolite repression HPr

The solution structure and dynamics of the Bacillus subtilis HPr-like protein, Crh, have been investigated using NMR spectroscopy. Crh exhibits high sequence identity (45 %) to the histidine-containing protein (HPr), a phospho-carrier protein of the phosphoenolpyruvate (PEP):carbohydrate phosphotransferase system, but contains no catalytic His15, the site of PEP-dependent phosphorylation in HPr. Crh also forms a mixture of monomers and dimers in solution whereas HPr is known to be monomeric. Complete backbone and side-chain assignments were obtained for the monomeric form, and 60 % of the dimer backbone resonances; allowing the identification of the Crh dimer interface from chemical-shift mapping. The conformation of Crh was determined to a precision of 0.46(+/-0.06) A for the backbone atoms, and 1.01(+/-0.08) A for the heavy atoms. The monomer structure is similar to that of known HPr 2.67(+/-0.22) A (C(alpha) rmsd), but has a few notable differences, including a change in the orientation of one of the helices (B), and a two-residue shift in beta-sheet pairing of the N-terminal strand with the beta4 strand. This shift results in a shortening of the surface loop present in HPr and consequently provides a flatter surface in the region of dimerisation contact, which may be related to the different oligomeric nature of these two proteins. A binding site of phospho-serine(P-Ser)-Crh with catabolite control protein A (CcpA) is proposed on the basis of highly conserved surface side-chains between Crh and HPr. This binding site is consistent with the model of a dimer-dimer interaction between P-Ser-Crh and CcpA. (15)N relaxation measured in the monomeric form also identified differential local mobility in the helix B which is located in the vicinity of this site.     

NMR studies on structure and dynamics of the monomeric derivative of BS-RNase: new insights for 3D domain swapping

Three-dimensional domain swapping is a common phenomenon in pancreatic-like ribonucleases. In the aggregated state, these proteins acquire new biological functions, including selective cytotoxicity against tumour cells. RNase A is able to dislocate both N- and C-termini, but usually this process requires denaturing conditions. In contrast, bovine seminal ribonuclease (BS-RNase), which is a homo-dimeric protein sharing 80% of sequence identity with RNase A, occurs natively as a mixture of swapped and unswapped isoforms. The presence of two disulfides bridging the subunits, indeed, ensures a dimeric structure also to the unswapped molecule. In vitro, the two BS-RNase isoforms interconvert under physiological conditions. Since the tendency to swap is often related to the instability of the monomeric proteins, in these paper we have analysed in detail the stability in solution of the monomeric derivative of BS-RNase (mBS) by a combination of NMR studies and Molecular Dynamics Simulations. The refinement of NMR structure and relaxation data indicate a close similarity with RNase A, without any evidence of aggregation or partial opening. The high compactness of mBS structure is confirmed also by H/D exchange, urea denaturation, and TEMPOL mapping of the protein surface. The present extensive structural and dynamic investigation of (monomeric) mBS did not show any experimental evidence that could explain the known differences in swapping between BS-RNase and RNase A. Hence, we conclude that the swapping in BS-RNase must be influenced by the distinct features of the dimers, suggesting a prominent role for the interchain disulfide bridges.     

The multiple forms of bovine seminal ribonuclease: Structure and stability of a C-terminal swapped dimer

Bovine seminal ribonuclease (BS-RNase) acquires an interesting anti-tumor activity associated with the swapping on the N-terminal. The first direct experimental evidence on the formation of a C-terminal swapped dimer (C-dimer) obtained from the monomeric derivative of BS-RNase, although under non-native conditions, is here reported. The X-ray model of this dimer reveals a quaternary structure different from that of the C-dimer of RNase A, due to the presence of three mutations in the hinge peptide 111–116. The mutations increase the hinge peptide flexibility and decrease the stability of the C-dimer against dissociation. The biological implications of the structural data are also discussed.     

A role for the intersubunit disulfides of seminal RNase in the mechanism of its antitumor action.

The dimeric structure of seminal ribonuclease (BS-RNase) is maintained by noncovalent interactions and by two intersubunit disulfide bridges. Another unusual feature of this enzyme is its antitumour action, consisting in a cytotoxic activity selective for malignant cells. This cytotoxic action is exerted when the protein reaches the cytosol of the affected cells, where it degrades ribosomal RNA, thus blocking protein synthesis and leading cells to death. The current model proposed for the mechanism of antitumour action of BS-RNase is based on the ability of the protein to resist the neutralizing action of the cytosolic RNase inhibitor, a resistance due to the dimeric structure of the enzyme. Monomeric RNases, and monomeric derivatives of BS-RNase, are strongly bound by the inhibitor and inactive as antitumor agents. Here we report on monomeric derivatives of BS-RNase that, although strongly inhibited by the cytosolic RNase inhibitor, are cytotoxic towards malignant cells. These monomers are produced by reductive cleavage of the intersubunit disulfides of the native, dimeric protein followed by linking the exposed sulfhydryls to small thiols through formation of mixed disulfides. We found that sulfhydryls from cell monolayers and cell membranes can attack these mixed disulfides in the monomeric derivatives, and reconstitute, through sulfhydryl-disulfide interchange reactions, the native dimeric protein, which is internalized as such, and displays its antitumour action.     

A new mutant of bovine seminal ribonuclease with a reversed swapping propensity

Bovine seminal ribonuclease (BS-RNase) is made up of two identical subunits bridged through two disulfide bonds. In solution, it exists as a 2:1 equilibrium mixture between two forms, with (MxM) and without swapping (M=M) of the N-terminal arms. The swapping endows BS-RNase with some special biological functions, including antitumor activity, since MxM retains a dimeric structure even under reducing conditions, thus evading the cytosolic ribonuclease inhibitor. To investigate the structural basis of domain swapping in BS-RNase, we have obtained several mutants by replacing selected residues with the corresponding ones of its monomeric counterpart, bovine pancreatic ribonuclease (RNase A). We have already shown that, in contrast with all other cases of swapped proteins, the swapping propensity of BS-RNase does not depend on the specific sequence of the 16-22 hinge loop, which connects the main body to the dislocating arm. In this paper we report the design, the expression, and the structural characterization of two mutants obtained by replacing Arg80 with Ser either in BS-RNase or in the mutant already containing the 16-22 hinge sequence of RNase A. NMR and circular dichroism data indicate that, in the monomeric form of the latter mutant, Ser80 acts as a switch for the conformation of the hinge region. Accordingly, in the dimeric form of the same mutant the MxM:M=M equilibrium ratio is inverted to 1:2. Overall, these data suggest that the presence of Arg80 triggers the swapping of N-terminal ends and plays a relevant role in the stability of the swapped form of BS-RNase.     

Natural and chemically induced oligomeric ribonucleases: structural study by immobilized metal ion affinity electrophoresis and their functional relationship

Oligomerization can endow proteins with novel structural and catalytic properties. The native dimer of bovine seminal ribonucleases (BS-RNase) binds, melts and catalyses the hydrolysis of double-stranded ribonucleic acids 30-fold better than its pancreatic homologue, the monomeric RNase A. Chemically induced oligomers of pancreatic RNase A are also found to show an increase in enzyme activity on double-stranded poly(A).poly(U) (Libonati, M. Bertoldi, M. and Sorrentino, S. (1996) Biochem. J. 318, 287-290) and, therefore, can be considered as potential immunosuppressive and cytotoxic agents. We report here a study on the relationship between surface histidine topography in oligomeric forms of these ribonucleases and their catalytic properties. Subtle changes in structure conformation of both BS-RNase and oligomeric RNase A are shown to result in a modification of the affinity of these proteins toward the immobilized transition-metal chelate, IDA-Cu(II). Because, such conformational change has been shown to correlate with an improvement of the newly acquired biological activities upon oligomerization, we can conclude that surface histidines topography constitutes an exquisite probe for the study of protein structure/function relationship.     

Refined atomic model of the four-layer aggregate of the tobacco mosaic virus coat protein at 2.4-A resolution.

Previous x-ray studies (2.8-A resolution) on crystals of tobacco mosaic virus coat protein grown from solutions containing high salt have characterized the structure of the protein aggregate as a dimer of a bilayered cylindrical disk formed by 34 chemically identical subunits. We have determined the crystal structure of the disk aggregate at 2.4-A resolution using x-ray diffraction from crystals maintained at cryogenic temperatures. Two regions of interest have been extensively refined. First, residues of the low-radius loop region, which were not modeled previously, have been traced completely in our electron density maps. Similar to the structure observed in the virus, the right radial helix in each protomer ends around residue 87, after which the protein chain forms an extended chain that extends to the left radial helix. The left radial helix appears as a long alpha-helix with high temperature factors for the main-chain atoms in the inner portion. The side-chain atoms in this region (residues 90-110) are not visible in the electron density maps and are assumed to be disordered. Second, interactions between subunits in the symmetry-related central A pair have been determined. No direct protein-protein interactions are observed in the major overlap region between these subunits; all interactions are mediated by two layers of ordered solvent molecules. The current structure emphasizes the importance of water in biological macromolecular assemblies.     

Role of the hinge peptide and the intersubunit interface in the swapping of N-termini in dimeric bovine seminal RNase.

Bovine seminal ribonuclease (BS-RNase) is the only known dimeric enzyme characterized by an equilibrium between two different 3D structures: MxM, with exchange (or swapping) of the N-terminal 1-20 residues, and M=M, without exchange. As a consequence, the hinge region 16-22 has a different tertiary structure in the two forms. In the native protein, the equilibrium ratio between MxM and M=M is about 7 : 3. Kinetic analysis of the swapping process for a recombinant sample shows that it folds mainly in the M=M form, then undergoes interconversion into the MxM form, reaching the same 7 : 3 equilibrium ratio. To investigate the role of the regions that are most affected structurally by the swapping, we expressed variant proteins by replacing two crucial residues with the corresponding ones from RNase A: Pro19, within the hinge peptide, and Leu28, located at the interface between subunits. We compared the structural properties of the monomeric forms of P19A-BS-RNase, L28Q-BS-RNase and P19A/L28Q-BS-RNase variants with those of the parent protein, and investigated the exchange kinetics of the corresponding dimers. The P19A mutation slightly increases the thermal stability of the monomer, but it does not alter the swapping tendency of the dimer. In contrast, the L28Q mutation significantly affects both the dimerization and swapping processes but not the thermal stability of the monomer. Overall, these results suggest that the structural determinants that control the exchange of N-terminal arms in BS-RNase may not be located within the hinge peptide, and point to a crucial role of the interface residues.     

Double Domain Swapping in Bovine Seminal RNase: Formation of Distinct N- and C-swapped Tetramers and Multimers with Increasing Biological Activities

Bovine seminal (BS) RNase, the unique natively dimeric member of the RNase super-family, represents a special case not only for its additional biological actions but also for the singular features of 3D domain swapping. The native enzyme is indeed a mixture of two isoforms: M = M, a dimer held together by two inter-subunit disulfide bonds, and MxM, 70% of the total, which, besides the two mentioned disulfides, is additionally stabilized by the swapping of its N-termini.When lyophilized from 40% acetic acid, BS-RNase oligomerizes as the super-family proto-type RNase A does. In this paper, we induced BS-RNase self-association and analyzed the multimers by size-exclusion chromatography, cross-linking, electrophoresis, mutagenesis, dynamic light scattering, molecular modelling. Finally, we evaluated their enzymatic and cytotoxic activities.Several BS-RNase domain-swapped oligomers were detected, including two tetramers, one exchanging only the N-termini, the other being either N- or C-swapped. The C-swapping event, confirmed by results on a BS-K113N mutant, has been firstly seen in BS-RNase here, and probably stabilizes also multimers larger than tetramers.Interestingly, all BS-RNase oligomers are more enzymatically active than the native dimer and, above all, they display a cytotoxic activity that definitely increases with the molecular weight of the multimers. This latter feature, to date unknown for BS-RNase, suggests again that the self-association of RNases strongly modulates their biological and potentially therapeutic properties.     

High-resolution study of the three-dimensional structure of horse heart metmyoglobin

The three-dimensional structure of horse heart metmyoglobin has been refined to a final R-factor of 15.5% for all observed data in the 6.0 to 1.9 A resolution range. The final model consists of 1242 non-hydrogen protein atoms, 154 water molecules and one sulfate ion. This structure has nearly ideal bonding and bond angle geometry. A Luzzati plot of the variation in R-factor with resolution yields an estimated mean co-ordinate error of 0.18 A. An extensive analysis of the pattern of hydrogen bonds formed in horse heart metmyoglobin has been completed. Over 80% of the polypeptide chain is involved in eight helical segments, of which seven are composed mainly of alpha-helical (3.6(13))-type hydrogen bonds; the remaining helix is composed entirely of 3(10) hydrogen bonds. Altogether, of 102 hydrogen bonds between main-chain atoms only six are not involved in helical structures, and four of these six occur within beta-turns. The majority of water molecules in horse heart metmyoglobin are found in solvent networks that range in size from two to 35 members. The size of water molecule networks can be rationalized on the basis of three factors: the number of hydrogen bonds to the protein surface, the presence of charged side-chain atoms, and the ability to bridge to neighboring molecules in the crystal lattice. Bridging water networks form the dominant intermolecular interactions. The backbone conformation of horse heart metmyoglobin is very similar to sperm whale metmyoglobin, with significant differences in secondary structure occurring only near residues 119 and 120, where residues 120 to 123 in sperm whale form a distorted type I reverse turn and the horse heart protein has a type II turn at residues 119 to 122. Nearly all of the hydrogen bonds between main-chain atoms (occurring mainly in helical regions) are common to both proteins, and more than half of the hydrogen bonds involving side-chain atoms observed in horse heart are also found in sperm whale metmyoglobin. Unlike sperm whale metmyoglobin, the heme iron atom in horse heart metmyoglobin is not significantly displaced from the plane of the heme group.     

Crystal structure of a dimeric form of streptococcal pyrogenic exotoxin A (SpeA1)

Streptococcal pyrogenic exotoxin A (SpeA1) is a bacterial superantigen associated with scarlet fever and streptococcal toxic shock syndrome (STSS). SpeA1 is found in both monomeric and dimeric forms, and previous work suggested that the dimer results from an intermolecular disulfide bond between the cysteines at positions 90 of each monomer. Here, we present the crystal structure of the dimeric form of SpeA1. The toxin crystallizes in the orthorhombic space group P212121, with two dimers in the crystallographic asymmetric unit. The final structure has a crystallographic R-factor of 21.52% for 7248 protein atoms, 136 water molecules, and 4 zinc atoms (one zinc atom per molecule). The implications of SpeA1 dimer on MHC class II and T-cell receptor recognition are discussed.     

Factors influencing accuracy of computer-built models: a study based on leucine zipper GCN4 structure.

A three-dimensional model of the leucine zipper GCN4 built from its amino acid sequence had been reported previously by us. When the two alternative x-ray structures of the GCN4 dimer became available, the root mean square (r.m.s.) shifts between our model and the structures were determined as approximately 2.7 A on all atoms. These values are similar to the r.m.s. shift of 2.8 A between the two GCN4 structures in the different crystal forms (C2 and P2(1)2(1)2(1)). CONGEN conformational searches were run to better understand the conditions that may determine the preference of different conformers in different environments and to test the sensitivity of our current modeling techniques. With a judicious choice of CONGEN search parameters, the backbone r.m.s. deviation improved to 0.8 A and 2.5 A on all atoms. The side-chain conformations of Val and Leu at the helical interface were well reproduced (1.2 A r.m.s.), and the large side-chain misplacements occurred with only a small number of charged amino acids and a tyrosine. Inclusion of the crystal environment (C2 symmetry), as a passive background, into the side-chain conformational search further improved the accuracy of the model to an r.m.s. deviation of 2.1 A. Conformational searches carried out in the two different crystal environments and employing the AMBER protein/DNA forcefield, as implemented in CONGEN, gave the r.m.s. values of 2.2 A (for the C2 symmetry) and 2.5 A (for the P2(1)2(1)2(1) symmetry). In the C2 symmetry crystal, as much as 40% of the surface of each dimer was involved in crystal contacts with other dimers, and the charged residues on the surface often interacted with immobilized water molecules. Thus, occasional large r.m.s. deviations between the model and the x-ray side chains were due to specific conditions that did not occur in solution.     

Intramolecular dynamics of low molecular weight protein tyrosine phosphatase in monomer-dimer equilibrium studied by NMR: a model for changes in dynamics upon target binding

Low molecular weight protein tyrosine phosphatase (LMW-PTP) dimerizes in the phosphate-bound state in solution with a dissociation constant of K(d)=1.5(+/-0.1)mM and an off-rate on the order of 10(4)s(-1). 1H and 15N NMR chemical shifts identify the dimer interface, which is in excellent agreement with that observed in the crystal structure of the dimeric S19A mutant. Two tyrosine residues of each molecule interact with the active site of the other molecule, implying that the dimer may be taken as a model for a complex between LMW-PTP and a target protein. 15N relaxation rates for the monomeric and dimeric states were extrapolated from relaxation data acquired at four different protein concentrations. Relaxation data of satisfactory precision were extracted for the monomer, enabling model-free analyses of backbone fluctuations on pico- to nanosecond time scales. The dimer relaxation data are of lower quality due to extrapolation errors and the possible presence of higher-order oligomers at higher concentrations. A qualitative comparison of order parameters in the monomeric and apparent dimeric states shows that loops forming the dimer interface become rigidified upon dimerization. Qualitative information on monomer-dimer exchange and intramolecular conformational exchange was obtained from the concentration dependence of auto- and cross-correlated relaxation rates. The loop containing the catalytically important Asp129 fluctuates between different conformations in both the monomeric and dimeric (target bound) states. The exchange rate compares rather well with that of the catalyzed reaction step, supporting existing hypotheses that catalysis and enzyme dynamics may be coupled. The side-chain of Trp49, which is important for substrate specificity, exhibits conformational dynamics in the monomer that are largely quenched upon formation of the dimer, suggesting that binding is associated with the selection of a single side-chain conformer.     

Effect of bovine seminal ribonuclease and bovine pancreatic ribonuclease A on bovine oocyte maturation

Bovine seminal ribonuclease (BS-RNase) contains the MxM (noncovalent dimer) and M=M (free monomer) in constant ratio. The aim of this work was to evaluate the effect of BS-RNase, its monomer and dimer forms, and also various mutants of this enzyme on meiotic completion in cattle oocytes. It was found that BS-RNase has irreversible effects on the meiotic maturation of bovine oocytes in vitro, particularly on the completion of meiosis. The effect of BS-RNase is dose-dependent. In medium supplemented with 1 microg/ml, the results were comparable with those of the control (70% MII oocytes after 24 hr of culture). Whereas 5 microg/ml reduced the number of MII oocytes to 50%, 10 and 25 microg/ml arrested this process completely. The MxM form and RNase A at 5 microg/ml inhibited the maturation rate by 71 and 48%, respectively, but a less significant effect was observed for the M=M form, or the carboxymethylated monomers MCM31 and MCM32 (21%, 16%, and 42% MII oocytes, respectively, in comparison with control). These data demonstrate that bovine ribonucleases can have variable detrimental effects on the maturation of bovine oocyte. J. Exp. Zool. 287:394-399, 2000.     

Conformational transitions in eosinophil cationic protein: a molecular dynamics study in aqueous environment

Extensive molecular dynamics simulations have been performed on eosinophil cationic protein (ECP). The two structures found in the crystallographic dimer (ECPA and ECPB) have been independently simulated. A small difference in the pattern of the sidechain hydrogen bonds in the starting structure has resulted in interesting differences in the conformations accessed during the simulations. In one simulation (ECPB), a stable equilibrium conformation was obtained and in the other (ECPA), conformational transitions at the level of sidechain interactions were observed. The conformational transitions exhibit the involvement of the solvent (water) molecules with a pore-like construct in the equilibrium conformation and an opening for a large number of water molecules during the transition phase. The details of these transitions are examined in terms of intra-protein hydrogen bonds, protein-water networks and the residence times of water molecules on the polar atoms of the protein. These properties show some significant differences in the region between the N-terminal helix and the loop before the C-terminal strand as a function of different conformations accessed during the simulations. However, the stable hydrogen bonds, the protein-water networks, and the hydration patterns in most part of the protein including the active site are very much similar in both the simulations, indicating the fact that these are intrinsic properties of proteins.     

Dimer dissociation and unfolding mechanism of coagulation factor XI apple 4 domain: spectroscopic and mutational analysis

The blood coagulation protein factor XI (FXI) consists of a pair of disulfide-linked chains each containing four apple domains and a catalytic domain. The apple 4 domain (A4; F272-E362) mediates non-covalent homodimer formation even when the cysteine involved in an intersubunit disulfide is mutated to serine (C321S). To understand the role of non-covalent interactions stabilizing the FXI dimer, equilibrium unfolding of wild-type A4 and its C321S variant was monitored by circular dichroism, intrinsic tyrosine fluorescence and dynamic light scattering measurements as a function of guanidine hydrochloride concentration. Global analysis of the unimolecular unfolding transition of wild-type A4 revealed a partially unfolded equilibrium intermediate at low to moderate denaturant concentrations. The optically detected equilibrium of C321S A4 also fits best to a three-state model in which the native dimer unfolds via a monomeric intermediate state. Dimer dissociation is characterized by a dissociation constant, K(d), of approximately 90 nM (in terms of monomer), which is in agreement with the dissociation constant measured independently using fluorescence anisotropy. The results imply that FXI folding occurs via a monomeric equilibrium intermediate. This observation sheds light on the effect of certain naturally occurring mutations, such as F283L, which lead to intracellular accumulation of non-native forms of FXI. To investigate the structural and energetic consequences of the F283L mutation, which perturbs a cluster of aromatic side-chains within the core of the A4 monomer, it was introduced into the dissociable dimer, C321S A4. NMR chemical shift analysis confirmed that the mutant can assume a native-like dimeric structure. However, equilibrium unfolding measurements show that the mutation causes a fourfold increase in the K(d) value for dissociation of the native dimer and a 1 kcal/mol stabilization of the monomer, resulting in a highly populated intermediate. Since the F283 side-chain does not directly participate in the dimer interface, we propose that the F283L mutation leads to increased dimer dissociation by stabilizing a monomeric state with altered side-chain packing that is unfavorable for homodimer formation.