Functional analysis of complexes with mixed primary and secondary cellulose synthases

In higher plants, cellulose is synthesized by cellulose synthase complexes, which contain multiple isoforms of cellulose synthases (CESAs). Among the total 10 CESA genes in Arabidopsis, recessive mutations at three of them cause the collapse of mature xylem cells in inflorescence stems of Arabidopsis (irx1^cesa8, irx3^cesa7 and irx5^cesa4). These CESA genes are considered secondary cell wall CESAs. The others (the function CESA10 is still unknown) are thought to be specialized for cellulose synthesis in the primary cell wall. A split-ubiquitin membrane yeast two-hybrid system was used to assess interactions among four primary CESAs (CESA1, CESA2, CESA3, CESA6) and three secondary CESAs (CESA4, CESA7, CESA8). Our results showed that primary CESAs could physically interact with secondary CESAs in a limited fashion. Analysis of transgenic lines showed that CESA1 could partially rescue irx1^cesa8 null mutants, resulting in complementation of the plant growth defect, collapsed xylem and cellulose content deficiency. These results suggest that mixed primary and secondary CESA complexes are functional using experimental set-ups.     

Electron tomographic analysis of somatic cell plate formation in meristematic cells of Arabidopsis preserved by high-pressure freezing

We have investigated the process of somatic-type cytokinesis in Arabidopsis (Arabidopsis thaliana) meristem cells with a three-dimensional resolution of approximately 7 nm by electron tomography of high-pressure frozen/freeze-substituted samples. Our data demonstrate that this process can be divided into four phases: phragmoplast initials, solid phragmoplast, transitional phragmoplast, and ring-shaped phragmoplast. Phragmoplast initials arise from clusters of polar microtubules (MTs) during late anaphase. At their equatorial planes, cell plate assembly sites are formed, consisting of a filamentous ribosome-excluding cell plate assembly matrix (CPAM) and Golgi-derived vesicles. The CPAM, which is found only around growing cell plate regions, is suggested to be responsible for regulating cell plate growth. Virtually all phragmoplast MTs terminate inside the CPAM. This association directs vesicles to the CPAM and thereby to the growing cell plate. Cell plate formation within the CPAM appears to be initiated by the tethering of vesicles by exocyst-like complexes. After vesicle fusion, hourglass-shaped vesicle intermediates are stretched to dumbbells by a mechanism that appears to involve the expansion of dynamin-like springs. This stretching process reduces vesicle volume by approximately 50%. At the same time, the lateral expansion of the phragmoplast initials and their CPAMs gives rise to the solid phragmoplast. Later arriving vesicles begin to fuse to the bulbous ends of the dumbbells, giving rise to the tubulo-vesicular membrane network (TVN). During the transitional phragmoplast stage, the CPAM and MTs disassemble and then reform in a peripheral ring phragmoplast configuration. This creates the centrifugally expanding peripheral cell plate growth zone, which leads to cell plate fusion with the cell wall. Simultaneously, the central TVN begins to mature into a tubular network, and ultimately into a planar fenestrated sheet (PFS), through the removal of membrane via clathrin-coated vesicles and by callose synthesis. Small secondary CPAMs with attached MTs arise de novo over remaining large fenestrae to focus local growth to these regions. When all of the fenestrae are closed, the new cell wall is complete. Few endoplasmic reticulum (ER) membranes are seen associated with the phragmoplast initials and with the TVN cell plate that is formed within the solid phragmoplast. ER progressively accumulates thereafter, reaching a maximum during the late PFS stage, when most cell plate growth is completed.     

Three-dimensional analysis of syncytial-type cell plates during endosperm cellularization visualized by high resolution electron tomography

The three-dimensional architecture of syncytial-type cell plates in the endosperm of Arabidopsis has been analyzed at approximately 6-nm resolution by means of dual-axis high-voltage electron tomography of high-pressure frozen/freeze-substituted samples. Mini-phragmoplasts consisting of microtubule clusters assemble between sister and nonsister nuclei. Most Golgi-derived vesicles appear connected to these microtubules by two molecules that resemble kinesin-like motor proteins. These vesicles fuse with each other to form hourglass-shaped intermediates, which become wide (approximately 45 nm in diameter) tubules, the building blocks of wide tubular networks. New mini-phragmoplasts also are generated de novo around the margins of expanding wide tubular networks, giving rise to new foci of cell plate growth, which later become integrated into the main cell plate. Spiral-shaped rings of the dynamin-like protein ADL1A constrict but do not fission the wide tubules at irregular intervals. These rings appear to maintain the tubular geometry of the network. The wide tubular network matures into a convoluted fenestrated sheet in a process that involves increases of 45 and 130% in relative membrane surface area and volume, respectively. The proportionally larger increase in volume appears to reflect callose synthesis. Upon fusion with the parental plasma membrane, the convoluted fenestrated sheet is transformed into a planar fenestrated sheet. This transformation involves clathrin-coated vesicles that reduce the relative membrane surface area and volume by approximately 70%. A ribosome-excluding matrix encompasses the cell plate membranes from the fusion of the first vesicles until the onset of the planar fenestrated sheet formation. We postulate that this matrix contains the molecules that mediate cell plate assembly.     

Features of the primary wall CESA complex in wild type and cellulose-deficient mutants of Arabidopsis thaliana

Evidence from genetics, co-precipitation and bimolecular fluorescence complementation suggest that three CESAs implicated in making primary wall cellulose in Arabidopsis thaliana form a complex. This study shows the complex has a M(r) of approximately 840 kDa in detergent extracts and that it has undergone distinctive changes when extracts are prepared from some cellulose-deficient mutants. The mobility of CESAs 1, 3, and 6 in a Triton-soluble microsomal fraction subject to blue native polyacrylamide gel electrophoresis was consistent with a M(r) of about 840 kDa. An antibody specific to any one CESA pulled down all three CESAs consistent with their occupying the same 840 kDa complex. In rsw1, a CESA1 missense mutant, extracts of seedlings grown at the permissive temperature have an apparently normal CESA complex that was missing from extracts of seedlings grown at the restrictive temperature where CESAs precipitated independently. In prc1-19, with no CESA6, CESAs 1 and 3 were part of a 420 kDa complex in extracts of light-grown seedlings that was absent from extracts of dark-grown seedlings where the CESAs precipitated independently. Two CESA3 missense mutants retained apparently normal CESA complexes as did four cellulose-deficient mutants defective in proteins other than CESAs. The 840 kDa complex could contain six CESA subunits and, since loss of plasma membrane rosettes accompanies its loss in rsw1, the complex could form one of the six particles which electron microscopy reveals in rosettes.     

Cellulose synthesis: a complex complex

Cellulose is the world's most abundant biopolymer and a key structural component of the plant cell wall. Cellulose is comprised of hydrogen-bonded beta-1,4-linked glucan chains that are synthesized at the plasma membrane by large cellulose synthase (CESA) complexes. Recent advances in visualization of fluorescently labelled complexes have facilitated exploration of regulatory modes of cellulose production. For example, several herbicides, such as isoxaben and 2,6-dichlorobenzonitrile that inhibit cellulose production appear to affect different aspects of synthesis. Dual-labelling of cytoskeletal components and CESAs has revealed dynamic feedback regulation between cellulose synthesis and microtubule orientation and organization. In addition, fluorescently tagged CESA2 subunits may substitute for another subunit, CESA6, which suggests both plasticity and specificity for one of the components of the CESA complex.     

The Arabidopsis Cellulose Synthase Complex: A Proposed Hexamer of CESA Trimers in an Equimolar Stoichiometry

Cellulose is the most abundant renewable polymer on Earth and a major component of the plant cell wall. In vascular plants, cellulose synthesis is catalyzed by a large, plasma membrane-localized cellulose synthase complex (CSC), visualized as a hexameric rosette structure. Three unique cellulose synthase (CESA) isoforms are required for CSC assembly and function. However, elucidation of either the number or stoichiometry of CESAs within the CSC has remained elusive. In this study, we show a 1:1:1 stoichiometry between the three Arabidopsis thaliana secondary cell wall isozymes: CESA4, CESA7, and CESA8. This ratio was determined utilizing a simple but elegant method of quantitative immunoblotting using isoform-specific antibodies and ³⁵S-labeled protein standards for each CESA. Additionally, the observed equimolar stoichiometry was found to be fixed along the axis of the stem, which represents a developmental gradient. Our results complement recent spectroscopic analyses pointing toward an 18-chain cellulose microfibril. Taken together, we propose that the CSC is composed of a hexamer of catalytically active CESA trimers, with each CESA in equimolar amounts. This finding is a crucial advance in understanding how CESAs integrate to form higher order complexes, which is a key determinate of cellulose microfibril and cell wall properties.     

POM-POM2/cellulose synthase interacting1 is essential for the functional association of cellulose synthase and microtubules in Arabidopsis

In plants, regulation of cellulose synthesis is fundamental for morphogenesis and plant growth. Cellulose is synthesized at the plasma membrane, and the orientation of synthesis is guided by cortical microtubules; however, the guiding mechanism is currently unknown. We show that the conditional root elongation pom2 mutants are impaired in cell elongation, fertility, and microtubule-related functions. Map-based cloning of the POM-POM2 locus revealed that it is allelic to CELLULOSE SYNTHASE INTERACTING1 (CSI1). Fluorescently tagged POM2/CSI1s associated with both plasma membrane-located cellulose synthases (CESAs) and post-Golgi CESA-containing compartments. Interestingly, while CESA insertions coincided with cortical microtubules in the pom2/csi1 mutants, the microtubule-defined movement of the CESAs was significantly reduced in the mutant. We propose that POM2/CSI1 provides a scaffold between the CESAs and cortical microtubules that guide cellulose synthesis.     

Characterization of 25 full-length <Emphasis Type="Italic">S-RNase</Emphasis> alleles,including flanking regions,from a pool of resequenced apple cultivars

Key message

Our work focuses on understanding the lifetime and thus stability of the three main cellulose synthase (CESA) proteins involved in primary cell wall synthesis of Arabidopsis. It had long been thought that a major means of CESA regulation was via their rapid degradation. However, our studies here have uncovered that AtCESA proteins are not rapidly degraded. Rather, they persist for an extended time in the plant cell.

Abstract

Plant cellulose is synthesized by membrane-embedded cellulose synthase complexes (CSCs). The CSC is composed of cellulose synthases (CESAs), of which three distinct isozymes form the primary cell wall CSC and another set of three isozymes form the secondary cell wall CSC. We determined the stability over time of primary cell wall (PCW) CESAs in Arabidopsis thaliana seedlings, using immunoblotting after inhibiting protein synthesis with cycloheximide treatment. Our work reveals very slow turnover for the Arabidopsis PCW CESAs in vivo. Additionally, we show that the stability of all three CESAs within the PCW CSC is altered by mutations in individual CESAs, elevated temperature, and light conditions. Together, these results suggest that CESA proteins are very stable in vivo, but that their lifetimes can be modulated by intrinsic and environmental cues.

     

KORRIGAN1 Interacts Specifically with Integral Components of the Cellulose Synthase Machinery

Cellulose is synthesized by the so called rosette protein complex and the catalytic subunits of this complex are the cellulose synthases (CESAs). It is thought that the rosette complexes in the primary and secondary cell walls each contains at least three different non-redundant cellulose synthases. In addition to the CESA proteins, cellulose biosynthesis almost certainly requires the action of other proteins, although few have been identified and little is known about the biochemical role of those that have been identified. One of these proteins is KORRIGAN (KOR1). Mutant analysis of this protein in Arabidopsis thaliana showed altered cellulose content in both the primary and secondary cell wall. KOR1 is thought to be required for cellulose synthesis acting as a cellulase at the plasma membrane–cell wall interface. KOR1 has recently been shown to interact with the primary cellulose synthase rosette complex however direct interaction with that of the secondary cell wall has never been demonstrated. Using various methods, both in vitro and in planta, it was shown that KOR1 interacts specifically with only two of the secondary CESA proteins. The KOR1 protein domain(s) involved in the interaction with the CESA proteins were also identified by analyzing the interaction of truncated forms of KOR1 with CESA proteins. The KOR1 transmembrane domain has shown to be required for the interaction between KOR1 and the different CESAs, as well as for higher oligomer formation of KOR1.     

Cytokinesis in tobacco BY-2 and root tip cells: a new model of cell plate formation in higher plants

Cell plate formation in tobacco root tips and synchronized dividing suspension cultured tobacco BY-2 cells was examined using cryofixation and immunocytochemical methods. Due to the much improved preservation of the cells, many new structural intermediates have been resolved, which has led to a new model of cell plate formation in higher plants. Our electron micrographs demonstrate that cell plate formation consists of the following stages: (1) the arrival of Golgi-derived vesicles in the equatorial plane, (2) the formation of thin (20 +/- 6 nm) tubes that grow out of individual vesicles and fuse with others giving rise to a continuous, interwoven, tubulo-vesicular network, (3) the consolidation of the tubulo-vesicular network into an interwoven smooth tubular network rich in callose and then into a fenestrated plate-like structure, (4) the formation of hundreds of finger-like projections at the margins of the cell plate that fuse with the parent cell membrane, and (5) cell plate maturation that includes closing of the plate fenestrae and cellulose synthesis. Although this is a temporal chain of events, a developing cell plate may be simultaneously involved in all of these stages because cell plate formation starts in the cell center and then progresses centrifugally towards the cell periphery. The "leading edge" of the expanding cell plate is associated with the phragmoplast microtubule domain that becomes concentrically displaced during this process. Thus, cell plate formation can be summarized into two phases: first the formation of a membrane network in association with the phragmoplast microtubule domain; second, cell wall assembly within this network after displacement of the microtubules. The phragmoplast microtubules end in a filamentous matrix that encompasses the delicate tubulo-vesicular networks but not the tubular networks and fenestrated plates. Clathrin-coated buds/vesicles and multivesicular bodies are also typical features of the network stages of cell plate formation, suggesting that excess membrane material may be recycled in a selective manner. Immunolabeling data indicate that callose is the predominant lumenal component of forming cell plates and that it forms a coat-like structure on the membrane surface. We postulate that callose both helps to mechanically stabilize the early delicate membrane networks of forming cell plates, and to create a spreading force that widens the tubules and converts them into plate-like structures. Cellulose is first detected in the late smooth tubular network stage and its appearance seems to coincide with the flattening and stiffening of the cell plate.     

Chitinase-like1/pom-pom1 and its homolog CTL2 are glucan-interacting proteins important for cellulose biosynthesis in Arabidopsis

Plant cells are encased by a cellulose-containing wall that is essential for plant morphogenesis. Cellulose consists of β-1,4-linked glucan chains assembled into paracrystalline microfibrils that are synthesized by plasma membrane-located cellulose synthase (CESA) complexes. Associations with hemicelluloses are important for microfibril spacing and for maintaining cell wall tensile strength. Several components associated with cellulose synthesis have been identified; however, the biological functions for many of them remain elusive. We show that the chitinase-like (CTL) proteins, CTL1/POM1 and CTL2, are functionally equivalent, affect cellulose biosynthesis, and are likely to play a key role in establishing interactions between cellulose microfibrils and hemicelluloses. CTL1/POM1 coincided with CESAs in the endomembrane system and was secreted to the apoplast. The movement of CESAs was compromised in ctl1/pom1 mutant seedlings, and the cellulose content and xyloglucan structures were altered. X-ray analysis revealed reduced crystalline cellulose content in ctl1 ctl2 double mutants, suggesting that the CTLs cooperatively affect assembly of the glucan chains, which may affect interactions between hemicelluloses and cellulose. Consistent with this hypothesis, both CTLs bound glucan-based polymers in vitro. We propose that the apoplastic CTLs regulate cellulose assembly and interaction with hemicelluloses via binding to emerging cellulose microfibrils.     

Manipulating cellulose biosynthesis by expression of mutant Arabidopsis proM24::CESA3ixr1‐2 gene in transgenic tobacco

Manipulation of the cellulose biosynthetic machinery in plants has the potential to provide insight into plant growth, morphogenesis and to create modified cellulose for anthropogenic use. Evidence exists that cellulose microfibril structure and its recalcitrance to enzymatic digestion can ameliorated via mis‐sense mutation in the primary cell wall–specific gene AtCELLULOSE SYNTHASE (CESA)3. This mis‐sense mutation has been identified based on conferring drug resistance to the cellulose inhibitory herbicide isoxaben. To examine whether it would be possible to introduce mutant CESA alleles via a transgenic approach, we overexpressed a modified version of CESA3, AtCESA3^ixr1‐2 derived from Arabidopsis thaliana L. Heynh into a different plant family, the Solanceae dicotyledon tobacco (Nicotiana tabacum L. variety Samsun NN). Specifically, a chimeric gene construct of CESA3^ixr1‐2, codon optimized for tobacco, was placed between the heterologous M24 promoter and the rbcSE9 gene terminator. The results demonstrated that the tobacco plants expressing M24‐CESA3^ixr1‐2 displayed isoxaben resistance, consistent with functionality of the mutated AtCESA3^ixr1‐2 in tobacco. Secondly, during enzymatic saccharification, transgenic leaf‐ and stem‐derived cellulose is 54%–66% and 40%–51% more efficient, respectively, compared to the wild type, illustrating translational potential of modified CESA loci. Moreover, the introduction of M24‐AtCESA3^ixr1‐2 caused aberrant spatial distribution of lignified secondary cell wall tissue and a reduction in the zone occupied by parenchyma cells.     

The N‐terminal zinc finger of CELLULOSE SYNTHASE6 is critical in defining its functional properties by determining the level of homodimerization in Arabidopsis

Primary cell wall cellulose is synthesized by the cellulose synthase complex (CSC) containing CELLULOSE SYNTHASE1 (CESA1), CESA3 and one of four CESA6‐like proteins in Arabidopsis. It has been proposed that the CESA6‐like proteins occupy the same position in the CSC, but their underlying selection mechanism remains unclear. We produced a chimeric CESA5 by replacing its N‐terminal zinc finger with its CESA6 counterpart to investigate the consequences for its homodimerization, a crucial step in forming higher‐order structures during assembly of the CSC. We found that the mutant phenotypes of prc1‐1, a cesa6 null mutant, were rescued by the chimeric CESA5, and became comparable to the wild type (WT) and prc1‐1 complemented by WT CESA6 in regard to plant growth, cellulose content, cellulose microfibril organization, CSC dynamics and subcellular localization. Bimolecular fluorescence complementation assays were employed to evaluate pairwise interactions between the N‐terminal regions of CESA1, CESA3, CESA5, CESA6 and the chimeric CESA5. We verified that the chimeric CESA5 explicitly interacted with all the other CESA partners, comparable to CESA6, whereas interaction between CESA5 with itself was significantly weaker than that of all other CESA pairs. Our findings suggest that the homodimerization of CESA6 through its N‐terminal zinc finger is critical in defining its functional properties, and possibly determines its intrinsic roles in facilitating higher‐order structures in CSCs.     

Genetic modification in cellulose‐synthase reduces crystallinity and improves biochemical conversion to fermentable sugar

The cellulose synthase (CESA) membrane complex synthesizes microfibrils of cellulose that surround all plant cells. Cellulose is made of sugar (β,1‐4 glucan) and accessing the sugar in cellulose for biofuels is of critical importance to stem the use of fossil fuels and avoid competition with food crops and pristine lands associated with starch‐based biofuel production. The recalcitrance of cellulose to enzymatic conversion to a fermentable form of sugar is related to the degree of hydrogen bonding or crystallization of the glucan chain. Herein, we isolate the first viable low biomass‐crystallinity mutant by screening for altered cell wall structure using X‐ray scattering as well as screening for enzymatic conversion efficiency on a range of cell wall mutants in the model plant Arabidopsis thaliana (L.) Heynh. Through detailed analysis of the kinetics of bioconversion we identified a mutant that met both selection criteria. This mutant is ixr1‐2, which contains a mutation in a highly conserved consensus sequence among the C‐terminal transmembrane regions within CESA3. A 34% lower biomass crystallization index and 151% improvement in the efficiency of conversion from raw biomass to fermentable sugars was measured relative to that of wild type (Col‐0). Recognizing the inherent ambiguities with an insoluble complex substrate like cellulose and how little is still understood regarding the regulation of CESA we propose a general model for how to manipulate CESA enzymes to improve the recalcitrance of cellulose to enzymatic hydrolysis. This study also raises intriguing possibilities as to the functional importance of transmembrane anchoring in CESA complex and microfibril formation.     

A Highlights from MBoC Selection: Molecular counting by photobleaching in protein complexes with many subunits: best practices and application to the cellulose synthesis complex

The constituents of large, multisubunit protein complexes dictate their functions in cells, but determining their precise molecular makeup in vivo is challenging. One example of such a complex is the cellulose synthesis complex (CSC), which in plants synthesizes cellulose, the most abundant biopolymer on Earth. In growing plant cells, CSCs exist in the plasma membrane as six-lobed rosettes that contain at least three different cellulose synthase (CESA) isoforms, but the number and stoichiometry of CESAs in each CSC are unknown. To begin to address this question, we performed quantitative photobleaching of GFP-tagged AtCESA3-containing particles in living Arabidopsis thaliana cells using variable-angle epifluorescence microscopy and developed a set of information-based step detection procedures to estimate the number of GFP molecules in each particle. The step detection algorithms account for changes in signal variance due to changing numbers of fluorophores, and the subsequent analysis avoids common problems associated with fitting multiple Gaussian functions to binned histogram data. The analysis indicates that at least 10 GFP-AtCESA3 molecules can exist in each particle. These procedures can be applied to photobleaching data for any protein complex with large numbers of fluorescently tagged subunits, providing a new analytical tool with which to probe complex composition and stoichiometry.     

A CELLULOSE SYNTHASE (CESA) gene essential for gametophore morphogenesis in the moss Physcomitrella patens

In seed plants, different groups of orthologous genes encode the CELLULOSE SYNTHASE (CESA) proteins that are responsible for cellulose biosynthesis in primary and secondary cell walls. The seven CESA sequences of the moss Physcomitrella patens (Hedw.) B. S. G. form a monophyletic sister group to seed plant CESAs, consistent with independent CESA diversification and specialization in moss and seed plant lines. The role of PpCESA5 in the development of P. patens was investigated by targeted mutagenesis. The cesa5 knockout lines were tested for cellulose deficiency using carbohydrate-binding module affinity cytochemistry and the morphology of the leafy gametophores was analyzed by 3D reconstruction of confocal images. No defects were identified in the development of the filamentous protonema or in production of bud initials that normally give rise to the leafy gametophores. However, the gametophore buds were cellulose deficient and defects in subsequent cell expansion, cytokinesis, and leaf initiation resulted in the formation of irregular cell clumps instead of leafy shoots. Analysis of the cesa5 knockout phenotype indicates that a biophysical model of organogenesis can be extended to the moss gametophore shoot apical meristem.     

OsCESA9 conserved‐site mutation leads to largely enhanced plant lodging resistance and biomass enzymatic saccharification by reducing cellulose DP and crystallinity in rice

Genetic modification of plant cell walls has been posed to reduce lignocellulose recalcitrance for enhancing biomass saccharification. Since cellulose synthase (CESA) gene was first identified, several dozen CESA mutants have been reported, but almost all mutants exhibit the defective phenotypes in plant growth and development. In this study, the rice (Oryza sativa) Osfc16 mutant with substitutions (W481C, P482S) at P‐CR conserved site in CESA9 shows a slightly affected plant growth and higher biomass yield by 25%–41% compared with wild type (Nipponbare, a japonica variety). Chemical and ultrastructural analyses indicate that Osfc16 has a significantly reduced cellulose crystallinity (CrI) and thinner secondary cell walls compared with wild type. CESA co‐IP detection, together with implementations of a proteasome inhibitor (MG132) and two distinct cellulose inhibitors (Calcofluor, CGA), shows that CESA9 mutation could affect integrity of CESA4/7/9 complexes, which may lead to rapid CESA proteasome degradation for low‐DP cellulose biosynthesis. These may reduce cellulose CrI, which improves plant lodging resistance, a major and integrated agronomic trait on plant growth and grain production, and enhances biomass enzymatic saccharification by up to 2.3‐fold and ethanol productivity by 34%–42%. This study has for the first time reported a direct modification for the low‐DP cellulose production that has broad applications in biomass industries.