Measurement of bacterial sulfate reduction in sediments: Evaluation of a single-step chromium reduction method

A procedure which includes the Total Reduced Inorganic Sulfur (TRIS) in a single distillation step is described for the radiotracer measurement of sulfate reduction in sediments. The TRIS includes both Acid Volatile Sulfide (AVS: H₂S + FeS) and the remaining Chromium Reducible Sulfur (CRS: S⁰, FeS₂). The single-step distillation was simpler and faster than the consecutive distillations of AVS and CRS. It also resulted in higher (4–50%) sulfate reduction rates than those obtained from the sum of³⁵S in AVS and CRS. The difference was largest when the sediment had been dried after AVS but before CRS distillation. Relative to the³⁵S-AVS distillation alone, the³⁵S-TRIS single-step distallation yielded 8–87% higher reduction rates. The separation and recovery of FeS, S⁰ and FeS₂ was studied under three distillation conditions: 1) cold acid, 2) cold acid with Cr²⁺, and 3) hot acid with Cr²⁺. The FeS was recovered by cold acid alone while pyrite was recovered by cold acid with Cr²⁺. A smaller S⁰ fraction, presumably of the finer crystal sizes, was recovered also in the cold acid with Cr²⁺ while most of the S⁰ required hot acid with Cr²⁺ for reduction to H₂S.