Simultaneous estimation of levodopa and carbidopa by RP‐HPLC using a fluorescence detector: its application to a pharmaceutical dosage form

A reverse‐phase high‐performance liquid chromatographic (RP‐HPLC) method was developed and validated for the simultaneous estimation of levodopa and carbidopa in bulk and pharmaceutical formulations. Chromatographic separation was achieved by using a C₁₈ reverse‐phase column and a mixture of an aqueous phase (10 mM potassium dihydrogen phosphate buffer, pH 4.0) and methanol (90:10 v/v) as the mobile phase. Quantitative analysis of levodopa and carbidopa was performed using a fluorescence detector at an excitation wavelength of 280 nm and an emission wavelength of 310 nm. The method was linear between 5 and 500 ng/mL for both levodopa and carbidopa. The detection limits for levodopa and carbidopa were 0.30 and 0.60 ng/mL, respectively, whereas the quantitation limit was 0.80 ng/mL for levodopa and 1.2 ng/mL for carbidopa. The method demonstrated good and consistent recoveries (99.63–100.80% for levodopa and 98.97–100.94% for carbidopa) with low interday and intraday relative standard deviation. The validated method was successfully applied to quantify levodopa and carbidopa simultaneously in a pharmaceutical formulation. The method was found to be precise, sensitive and accurate for the simultaneous determination levodopa and carbidopa in bulk and pharmaceutical formulations. Copyright © 2014 John Wiley & Sons, Ltd.