Influence of alginate properties and gel reinforcement on fermentation characteristics of immobilized yeast cells

The effect of alginate composition, gel concentration, gelation method, cell loading and surface area on fermentation characteristics of immobilized yeast cells have been investigated. Molecular weight and G/M ratio had only little effect on fermentation velocity and gel strength, while increasing the alginate concentration caused a sizeable decrease in fermentation velocity and an increase in gel strength. The internally gelled immobilizates generally showed a higher fermentation velocity for the same gel strength and no decrease in gel strength was seen during fermentation. With high initial cell loadings, the fermentation velocity per g of immobilizate was higher, but the productivity per cell was lower than with low initial cell loadings. The difference decreased with time. Specific surface area (surface/volume) was shown to be an important factor for the observed productivity per gram of immobilizate, with high S/V ratios giving the highest productivity. Gel shape had no influence on fermentation velocity for a given S/V ratio. Gelation behaviour of externally gelled beads was determined by estimating the amount of cells liberated during gel formation through measurement of invertase activity (yeast-bound) in the gelling solution. A method for reinforcement of internally gelled alginate slabs with a nylon mesh was developed and utilized for production of a continuous fermentation reactor with reinforced gels.