The use of three-dimensional model construction of virtual technology in orthopedic treatment

ObjectiveThe objective of this study is to explore the construction of a digital three-dimensional model of virtual technology that plays an auxiliary role in orthopedic treatment.MethodsThree fracture patients were selected, with no abnormality was observed in bone examination, no musculoskeletal disease in the past; and spiral CT scan of the spine and pelvis, upper limbs, and lower limbs was performed. The virtual technology was used to build a digital 3D model, mainly using the editing software Mimics10.0 software. In addition, the virtual three-dimensional model was verified by virtual surgery, data storage security, work efficiency of the model, model validity, three-dimensional characteristics of the model, the interaction mode of the model, and the data accuracy of the model were studied.ResultsThe digital 3D model was successfully established by Mimics10.0 software. The data fitting efficiency was very high. The data storage security of the 3D model was greatly improved compared with the 2D model, and the work efficiency was improved by at least 50%. There was also a significant change in the accuracy and interaction of data acquisition. Therefore, the detection of digital 3D model work through virtual surgery simulation fully demonstrated the positive auxiliary role of 3D model in orthopedic treatment.ConclusionThe digital 3D model based on Mimics10.0 software is efficient and accurate in obtaining data. It is very effective for subsequent adjuvant therapy in the field of orthopedics, reducing the probability of misdiagnosis by doctors, saving time and improving efficiency, reducing patient's physical pain and unnecessary economic expenses.