Biotechnological Process for Production of β-Dipeptides from Cyanophycin on a Technical Scale and Its Optimization

A triphasic process was developed for the production of β dipeptides from cyanophycin (CGP) on a large scale. Phase I comprises an optimized acid extraction method for technical isolation of CGP from biomass. It yielded highly purified CGP consisting of aspartate, arginine, and a little lysine. Phase II comprises the fermentative production of an extracellular CGPase (CphE_al) from Pseudomonas alcaligenes strain DIP1 on a 500-liter scale in mineral salts medium, with citrate as the sole carbon source and CGP as an inductor. During optimization, it was shown that 2 g liter⁻¹ citrate, pH 6.5, and 37°C are ideal parameters for CphE_al production. Maximum enzyme yields were obtained after induction in the presence of 50 mg liter⁻¹ CGP or CGP dipeptides for 5 or 3 h, respectively. Aspartate at a concentration of 4 g liter⁻¹ induced CphE_al production with only about 30% efficiency in comparison to that with CGP. CphE_al was purified utilizing its affinity for the substrate and its specific binding to CGP. CphE_al turned out to be a serine protease with maximum activity at 50°C and at pH 7 to 8.5. Phase III comprises degradation of CGP to β-aspartate-arginine and β-aspartate-lysine dipeptides with a purity of over 99% (by thin-layer chromatography and high-performance liquid chromatography), employing a crude CphE_al preparation. Optimum degradation parameters were 100 g liter⁻¹ CGP, 10 g liter⁻¹ crude CphE_al powder, and 4 h of incubation at 50°C. The overall efficiency of phase III was 91%, while 78% (wt/wt) of the used CphE_al powder with sustained activity toward CGP was recovered. The optimized process was performed with industrial materials and equipment and is applicable to any desired scale.